Hi,I have 4s,I have a problem since 2days that the ring tone,lock sound,password sound,volume button and slide,calls flash,all sometimes working and sometimes not,plz help me to solve this problem.thanks
HI
i have iPhone 4s with iOS 8.1.3 , since 2 days I'm facing a problem that the ring tone,lock button sound,password sound,volume buttons,slide volume and incoming call flash,
all these not working properly , sometimes it will work and sometimes it will not, I tried to restart the phone many times but I didn't fix the problem
plz help me to solve this problem
Try to reset the phone by holding the sleep and home button for about 10sec, until the Apple logo comes back again. You will not lose any data by resetting, but it can cure some glitches.
If this does not help, setting it up as new device would be the next step:
How to erase your iOS device and then set it up as a new device or restore it from backups
Similar Messages
-
When my wife and I upgraded to OSX Mavericks the person I was talking to on apple support said I could use My apple ID and password to up grade on my wife's computer also. Well after we got finished she had all my Info from my computer on hers. It took about 6 hours to install the whole upgrade. They said if you have any problems just to call back and we will help. Here it is on a Sunday and I call every 5 minutes and all I get is a busy signal. If they are not open on Sunday's then why don't the just say so.The number I keep calling is 1-888-263-3394.I don't understand anything about iCloud, maybe thats why all my Info is on hers to. Larry
My wife uses my Apple ID and password to download and install all her software because that way we only pay for it once and get essentially a family license. Otherwise we would each have to purchase and pay for our own copy. However, that only applies when we are purchasing software from the App Store or the iTunes store. We each have our own individual iCloud accounts where we store our personal Contact, Calendar, and other data. You can change the Apple ID on your wife's computer by going to System Preferences > Accounts and choosing her account then clicking on Apple ID: Set.
Now if you want to make things more intertwined you and your wife can share your contacts, calendars etc with one another with read only or read write priveleges. -
Plz help me in solving this problem
Hi all
i am facing a problem with calculation of billing amount,late/delayed payment surcharge(DPS),and arrear.the problem is there is no any particular field in DFKKOP table where the value against these fields are stored and rest 2 fields value DPS AND ARREAR comes from FPL9 SAP IS-U standard report ,it comes calculated from there and directly print on bill from script.can any body tell me is there any way to find out the value of DPS/ARREAR through FPL9 or by bill.all the fields are required in report.the billed amount is in DFKKOP-BETRW.
plz show me some way to solve the issue
thank.
gauravHI MANOHAR
thanks for your help,but plz elaborate on
1. how to use ST05 on fpl9 is there any procedure so plz tell me how to analyse the performance,and how to identify the problem area
2.FPL9 is having entries against many heads(clearing reasons) around 35 through which the ARREAR is calculated how to identify which head is useful for ARREAR calculation.
3.DFKKOP table having HVORG/TVORG/AUGRD fields these fields having entries against amount field but no field is maintained for arrear it's calculated value through HVORG/TVORG/AUGRD combination.,can u help me in identifying which combination is used for arrear calculation. -
Hello i have a unusual problem,anyway my iphone 4 wont turn on and when someone calls they hear ringing,but my phone doesent ring.So i poen simcase and now ring off. Screen is just black,because it's turned off..Please help me to solve this problem..Thanks
As far as trying to power up your device, make sure it has a good charge and then hold the button on the top of the phone and the home button on the faceplate together until the apple appears on the screen.
-
Hi, I have the following problem with Time Capsule: La imagen del disco de copia de seguridad “/Volumes/Data/MacBook Pro de Carlos.sparsebundle” ya está en uso. Please your comments to solve this problem, i can't made a backup. Thanks.
Try Here > http://pondini.org/TM/Time_Capsule.html
Perhaps P 2 > Time Machine could not complete . . . sparsebundle could not be accessed. (Error 109). -
Hello Sorry for the inconvenience, but I have a problem in Java I can not open files, audio chat, which type of jnlp after the last update of the Java 2012-004
Please help me in solving this problem.Make sure Java is enable in your browser's security settings.
Open Java Preferences (in Utilities folder)
Make sure Web-start applications are enabled.
Drag Java 32-bit to the top of the list.
jnlp isn't an audio file format. It's just a java web-start program (Java Network Launching Protocol). -
We have 'CS6' version of Adobe. We are facing a problem with 'Acrobat Pro'. Every month that is stop working and everytime need to install. Kindly help us regarding solving this problem...
Your Acrobat is running in Trial Mode. Try this KB: Creative Cloud applications unexpectedly revert to trial mode | CS6, CCM
If it doesn't work you need to contact Adobe Support for assistance. -
I have the iPhone 4 recently became weak Wi-Fi where I can not use the Internet only when sitting Bejjani router, Can anyone help me in solving this problem please
iPhone 4, iOS 7.0.3There's a whole lot to read in your post, and frankly I have not read it all.
Having said that, this troubleshooting guide should help:
http://support.apple.com/kb/TS1538
In particular, pay attention to the mobile device support sections near the bottom, assuming you have already done the items above it. -
I am blocked, as I have updated new apple virsion, which do not allowed sim card purchased in India, at present I am in India
and I want to use my phone using by purchase local sim card, please help me to solve this problem...Jayendrabhai PatelYOU will need to contact the carrier to whom the phone is locked. YOU will need to see IF that carrier offers unlocking and IF you qualify. This has nothing to do with Apple or this forum.
Best,
GDG -
Can you help me to solve this problem (user-exit for xd02)
Hi!
can you help me to solve this problem?
transaction XD02
To pass the length of the field to 7 max for KNA1-SORT (Search criterion 1 )
To pass the length of the field to 4 max for ADRC-SORT2 (Search criterion 2)
It is not possible to save the customer card as long as the search criterion is not univocal
I seek one to use-exit .
Thanks.Hi,
Check the exit SAPMF02D.
Regards,
Surinder -
Hi, when ever I'm using 3G, on my Iphone4 sim stops working and network is lost, this started after I updated my phone with 6.0.1(10A523)version. Please help how to solve this problem. Thanks.
Photos/videos in the Camera Roll are not synced. Photos/videos in the Camera Roll are not touched with the iTunes sync process. Photos/videos in the Camera Roll can be imported by your computer which is not handled by iTunes. Most importing software includes an option to delete the photos/videos from the Camera Roll after the import process is complete. If is my understanding that some Windows import software supports importing photos from the Camera Roll, but not videos. Regardless, the import software should not delete the photos/videos from the Camera Roll unless you set the app to do so.
Photos/videos in the Camera Roll are included with your iPhone's backup. If you synced your iPhone with iTunes before the videos on the Camera Roll went missing and you haven't synced your iPhone with iTunes since they went missing, you can try restoring the iPhone with iTunes from the iPhone's backup. Don't sync the iPhone with iTunes again and decline the prompt to update the iPhone's backup after selecting Restore. -
Hello Experts Please help me to solve this problem.
Hello Experts,
I am getting a problem while installing the SOLUTION MANAGER 4.0.
in step 17/45 IMPORT ABAP :
the problem is :
ERROR 2008-04-29 03:10:28.110
CJS-30023 Process call '/usr/sap/SLM/SYS/exe/run/R3load -testconnect' exits with error code 2. For details see log file(s) R3load.exe.log.
when i saw R3load.exe.log file it has the following contain :
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
/usr/sap/SLM/SYS/exe/run/R3load: START OF LOG: 20080428095833
/usr/sap/SLM/SYS/exe/run/R3load: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#13 $ SAP
/usr/sap/SLM/SYS/exe/run/R3load: version R7.00/V1.4 [UNICODE]
Compiled Jul 14 2007 02:19:03
/usr/sap/SLM/SYS/exe/run/R3load -testconnect
DbSl Trace: OCI-call 'OCIServerAttach' failed with rc=12505
DbSl Trace: CONNECT failed with sql error '12505'
DbSl Trace: OCI-call 'OCIServerAttach' failed with rc=12505
DbSl Trace: CONNECT failed with sql error '12505'
(DB) ERROR: db_connect rc = 256
DbSl Trace: OCI-call 'OCIServerAttach' failed with rc=12505
DbSl Trace: CONNECT failed with sql error '12505'
DbSl Trace: OCI-call 'OCIServerAttach' failed with rc=12505
DbSl Trace: CONNECT failed with sql error '12505'
(DB) ERROR: DbSlErrorMsg rc = 99
/usr/sap/SLM/SYS/exe/run/R3load: job finished with 1 error(s)
/usr/sap/SLM/SYS/exe/run/R3load: END OF LOG: 20080428095834
Please can any body help me to solve this problem.
waiting for fast response, as my installtion is pending due to this problem.
have a nice day.
Regards,
Shivendra.Hi,
The following should be verified:
(1) check what DB instances the listener currently is aware of. This can be done with the command 'lsnrctl services'.
(in case you listener does not have the default name LISTENER, then use 'lsnrctl services <listener name>' )
(2) Perhaps there is an issue with the dynamic instance registration, even though the error code is different, you should nevertheless check the points from note #563574.
(3) Verfiy the value of the parameter local_listener (see mentioned note). Since you have changed the listener, the parameter might still be wrong.
In case local_listener is correcly set you should give the command
ALTER SYSTEM REGISTER;
a try.
Best Regards,
Michael -
WARNING! Your Flash Player may be out of date. how can i solve this problem/
WARNING! Your Flash Player may be out of date. how can i solve this problem/
The Flash update alerts are fake, and are intended to mislead you into installing malware and/or to steal your identity. They're the result of an attack on your router that has caused you to get false results from looking up the addresses of Internet servers. Requests sent to well-known websites such as Google and YouTube are redirected to a server controlled by the attacker.
The router's documentation should tell you how to reset it to the factory default state. Usually there's a pinhole switch somewhere in the back. It may be labeled "RESET." Insert a paper clip and press the button inside for perhaps 15 seconds, or as long as the instructions specify.
Then go through the initial setup procedure. I can't be specific, because it's different for every model. The key points are these:
1. Don't allow the router to be administered from the WAN (Internet) port, if it has that option.
2. Set a strong password to protect the router's settings: at least ten random upper- and lower-case letters and digits.Don't use the default password or any other that could be guessed.
3. If the router is wireless, or if you have a wireless access point on the network, use "WPA 2 Personal" security and set another strong password to protect the network. If the router or access point doesn't support WPA 2, it's obsolete and must be replaced.
During the time the router was compromised, you were redirected to bogus websites. If you ever connected to a secure site and got a warning from your browser that the identity of the server could not be verified, and you dismissed that warning in order to log in, assume that your credentials for the site have been stolen and that the attacker has control of the account. This warning also applies to all websites on which you saw the fake update alerts. -
i restored my ipod touch .bt again it display as"ipod is disabled.connect to itunes'wht shall i do nw.i wanna get it back.i restored nt in my computer.help me to solve this problem !!!
You have to restore the device within iTunes. You want to use the same computer that you always sync with so that you can restore your app data and settings. You can restore with any other computer, but you will lose everything on the iPod.
Take special note of the article about using recovery mode. Many times, that is the only way to bypass the pass code and restore the device.
IOS: Wrong passcode results in red disabled screen
http://support.apple.com/kb/HT1212?viewlocale=en_US&locale=en_US
This will tell you how to restore
http://support.apple.com/kb/HT1414
If you cannot restore that way, you may have to use recovery mode.
http://support.apple.com/kb/HT1808 -
My iPhone 4 Bluetooth, using ios7, cannot identify any other bluetooth device (even other apple products). Says device not supported. How to solve this problem?
Supported Bluetooth Profiles
It is not supposed to detect other Apple products via Bluetooth.
Maybe you are looking for
-
MacBook Display flashes white, red, blue, grey when starting up.
This problem just started yesterday when I turned on my Mac. It made the apple sound and then it went to a blue screen then started flashing white, red, blue, grey and then a few grey patterns. It went away last night when I left it on for about 5 mi
-
The fan begins to oscillate a lot faster and the laptop gets heated up in like 2 minutes:/
-
How to set a very very long string in Binder
Hello Everybody, I want to set a string in the binder from my Filter. Is there some limit to length of string that can be set. fyi i am using the following code to do that. serviceBinder.putLocal("ListOfNames", strItemName.toString()); thanks, sapan
-
Updated yesterday, now my pdf docs are trying to convert to Word
Our CEO clicked on an Adobe update pop up yesterday. Now when he tries to open pdf documents they look like it is trying to go to a Word document but can not read it. Is there a fix or do I need to uninstall?
-
Hi Folks, I am in the middle of EDQ Proof of Concept. I am creating a Microsoft SQL Server Integration Service (SSIS) package to call EDQ. I have create a batch (***.bat) that calls the EDQ job to run my Data Quality job. What would be the best way