Hiding tabs in "user profile" iview (EP7)

Hi,
I am working on EP7 SPS12 and was just looking for any possibilities to modify the "user profile"-application which is a webdynpro now. I guess we have to modify the webdynpro component, not configuration possible, right?
I did not find any WD application in the webdynpro content administrator, which could be the right one...
Any ideas?
Regards,
Martin

Hi Martin,
Can you please elaborate your question?
The User Administration is a web dynpro based since NW04s, not only for SP12.
What do you mean by wanting to modifying the application?
Roy

Similar Messages

Disable or Remove some field from User Profile in Personalize iView

Hi All,
I have a requirement to Disable one field and Remove one field from User Profile in Personalize iView.
i want to disable Activate Accessibility Feature field and Remove Language field.
How to archive this.
Thanks and Regards
Trilochan

Hi,
You can use [Personalization|http://help.sap.com/saphelp_nw70/helpdata/en/42/ed3ce7f8593eebe10000000a1553f7/frameset.htm] to do this :
1. logon as an admin and navigate to Portal Content > Portal Users > Standard Portal Users and open Every User Core Role
2. right click on User Profile and select edit
3. click on the Preview button then right click + CTRL on the iView and personalize the User Profile iView
That's it.
Regards,
Pierre

User Profile Disks - exclusions not working

I'm utilizing User Profile Disks to handle profiles between my Session Host servers. I have some odd requirements on which folders need to be included in the UPD, so for this reason, I am using the option of "Store all user settings and data on the
user profile disk" and then I am trying to exclude specific folders. However the exclusions are not working properly.
For example, I am trying to exclude AppData\Roaming\Adobe. In Server Manager under the profile disk settings, I add an exclusion of \AppData\Roaming\Adobe.
However after I connect to a RemoteApp and my profile disk is created, when I mount the UPD, I see that this folder is still created inside the VHDX. Am I entering the path incorrectly? How would I properly exclude a specific folder from being redirected
to the user profile disk?

Hi ,
This issue may occur if the user profile was manually deleted by using the command prompt or by using Windows Explorer and if the “Do not logon users with temporary profiles” Group Policy setting is configured.
A profile that is manually deleted does not remove the security identifier (SID) from the profile list in the registry.
If the SID is present, Windows will try to load the profile by using the ProfileImagePath that points to a nonexistent path. Therefore, the profile cannot be loaded.
To resolve this problem open yourself, follow these steps:
Right click Computer > Properties > Advanced system settings > Advanced tab > Under User Profiles, click Settings > In the User Profiles dialog box, select the profile that you want to delete > click Delete > Apply/OK.
Also check your Synchronization Connection Settings in User Profile Service application also make sure you are running this service application with Service Account i.e. Account with Farm Admin permission.
Please mark the same as answer if it helps you.Thanks.

EP7 "Personalize - User Mapping" iView not working

We are in the process of migrating to EP7 and have hit a snag with the Personalize - User Mapping" iview (com.sap.portal.persoUserMapping) short dumping with the following when called:
Exception ID:04:37_19/04/07_0203_91834451
[EXCEPTION]
com.sapportals.portal.prt.component.PortalComponentException: Error in service call of Portal Component
Component : pcd:portal_content/com.shell.siti.gph.shell_content/cust_content/com.shell.shellpeople/100_admin/300_user_admin/100_roles/com.shell.shellpeople.admin.roles.portal_personalization/com.sap.portal.persoUserMapping/com.sap.portal.persoUserMapping
Component class : com.sapportals.portal.prt.component.usermanagement.UserMappingComponent
User : Steve.Caffrey
     at com.sapportals.portal.prt.core.PortalRequestManager.handlePortalComponentException(PortalRequestManager.java:969)
     at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:343)
     at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
     at com.sapportals.portal.prt.core.async.AsyncIncludeRunnable$1$DoDispatchRequest.run(AsyncIncludeRunnable.java:375)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sapportals.portal.prt.core.async.AsyncIncludeRunnable.run(AsyncIncludeRunnable.java:388)
     at com.sapportals.portal.prt.core.async.ThreadContextRunnable.run(ThreadContextRunnable.java:164)
     at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:729)
     at java.lang.Thread.run(Thread.java:534)
Caused by: java.lang.NullPointerException
     at java.util.Hashtable.put(Hashtable.java:393)
     at java.util.Properties.setProperty(Properties.java:102)
     at com.sapportals.portal.prt.component.usermanagement.MappingFieldParser.addElementToCreds(MappingFieldParser.java:177)
     at com.sapportals.portal.prt.component.usermanagement.MappingFieldParser.parseFieldItem(MappingFieldParser.java:155)
     at com.sapportals.portal.prt.component.usermanagement.MappingFieldParser.parse(MappingFieldParser.java:62)
     at com.sapportals.portal.prt.component.usermanagement.UserMappingDataModel.interpreteUserMappingFields(UserMappingDataModel.java:950)
     at com.sapportals.portal.prt.component.usermanagement.UserMappingDataModel.getCredentials(UserMappingDataModel.java:643)
     at com.sapportals.portal.prt.component.usermanagement.UserMappingDataModel.getCredentials(UserMappingDataModel.java:241)
     at com.sapportals.portal.prt.component.usermanagement.UserMappingView.addLogonScreenFields(UserMappingView.java:238)
     at com.sapportals.portal.prt.component.usermanagement.UserMappingView.createUserMappingGrid(UserMappingView.java:498)
     at com.sapportals.portal.prt.component.usermanagement.UserMappingView.doContent(UserMappingView.java:71)
     at com.sapportals.portal.prt.component.usermanagement.UserMappingComponent.doContent(UserMappingComponent.java:99)
     at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209)
     at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114)
     at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
     ... 7 more
Has anyone else had problems with this in EP7. It worked perfectly well in EP6 but I am aware there have been some user management API changes for EP7 and wonder if they may be the cause?
Any help or advice you can offer will be gratefully received and of course rewarded with points.
Thanks,
Steve.

Hi Sunil,
Thanks for the reply.
Unfortunately the Direct Editing tab is not available in EP7 (probably because it was so buggy in the first place).
Also, looking at our EP6 setup where the iView works just fine this parameter is set as:
ume.usermapping.unsecure=FALSE
Any other ideas?
Regards,
Steve.

Problem hiding Tabs in Tabstrip of My Trips and Expenses WD ABAP iView

Hi,
My requirement is to hide the thet tabs ALL MY Trips,All my Travel REquest,All my travel Plans,Pending expense report from the tabstrip ALl my Expense report in Travel and Expense Application.
I have gone through the thread and the sap note mentioned in
Re: Problem hiding Tabs in Tabstrip of My Trips and Expenses WD ABAP iView
My problem is tabs that has to be deleted /hidden does not present in the Development system, but exist in the QA or the prd system.
So how to implement the note when data is not present in the dev system and only exist in the QA/PRD system.
Pleas eprovide me your valuable inputs.
Thanks in advance.
Pooja

Implemneted the note and problem is solved.

Use one profile for all user profiles in Server 2012 R2

Hi
I am setting up an Windows Server 2012 R2 Template on VMware.
I will do som changes with the local admin user, and want all user that will log in to servers made from this Template, get the user profile I have set up for the admin account.
How to I do that?
Regards
StigKSand

the way I used to do this was to create a new profile the way I wanted with any shortcuts applications etc installed. then I would create another user account on the PC and make it an admin.
reboot the pc to ensure it hasn't got the pre-configured profile loaded and login with your newly created admin account.
then right click This PC in windows explorer and select properties, then select advanced system settings, and select user profiles on the advanced tab. You can then select the profile you made all the configuration to, and click copy and then select default
profile.
this should then mean any new users who login get this default profile on this server.
hopefully that is what you were referring to.
Regards,
Denis Cooper
MCITP EA - MCT
Help keep the forums tidy, if this has helped please mark it as an answer
My Blog
LinkedIn:

User profile synchronization service wont start after SharePoint Service pack SP2

Hi
-Using SharePoint 2010 with 1 appserver and 2 frontend webservers on Service Pack2. (ms server 2008r2, SQLServer2008r2).
-Farmaccount has been set to local admin on all sp servers.
-Firstly, the User Profile Service Application runs fine and is started. Dont mix it with the User profile synchronization Service.
Prior to installing SP2 User profile service application and user profile synchronization service were running fine.
The first thing I did after the installation of SP2 was running the:
-psconfig -cmd upgrade -inplace b2b -wait
As SharePoint setup user (spadmin).
This ran fine on the 2 front end web servers.
However i got one fault on the Appserver:
I have also tried:
PSConfig.exe -cmd upgrade -inplace b2b -force -cmd applicationcontent -install -cmd installfeatures
which led to same resulting error.
So I tried to start the Use profile synchronization service as suggested manually by logging on with the Farmaccount, starting the user profile synchronization service through Central Administration. This led to Stuck on Starting status.
The windows services Forefront had status starting, then stopped.
One question:
Prior to starting the User profile synchronization service through Central Administration. What account and startup status should the 2 Forefront Windows Services have? (Automatic and local system?) or (Automatic and Farmaccount?) or (Disabled and Local
system?) or (Disabled and farmaccount?). Because i know that SharePoint UPA will provision these services though Central Administration. However what is the default state prior to starting the Synchronization service?
So i continue...
Since it was stuck on starting i stopped it with:
stop-SPServiceInstance -identity <upaSyncguid>
which gave me:
Stop-SPServiceInstance : An object of the type Microsoft.SharePoint.Administrat
ion.SPServiceInstanceJobDefinition named "job-service-instance-36bdf2ef-58f2-45
e5-8f78-ab75f646611a" already exists under the parent Microsoft.SharePoint.Admi
nistration.SPTimerService named "SPTimerV4". Rename your object or delete the
and i could fix with:
#Stop the stopping:
stsadm -o provisionservice -action stop -servicetype "Microsoft.Office.Server.Administration.ProfileSynchronizationService, Microsoft.Office.Server.UserProfiles,
Version=14.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c" -servicename FIMSynchronizationService
I also removed the forefront certificate from personal - certificate store, as this is provisioned when user profile synchronization service is provisioned.
That set the Central Administration Status on the User profile synchronization Service to disabled. Fine.
Everytime i tried to start the user profile synchronization service (logged on as farmaccount), left it for 10-15 min and did iisreset and restart sharepoint timer service, and also tried rebooting the appserver. No change.
A thought, is it important to restart timer service and do iisreset on the two frontend servers after trying to start the user profile synchronization service on the appserver?
I'm getting to the point were i just want to delete the whole service application and set it up anew...
any tips will be greatly appreaciated.
brgs
Bjorn

You're very welcome, hope it helped, if not the I suggest you clear the configuration cache as follows.
The config cache is where config settings are stored locally on the Microsoft SharePoint server, so a SQL call isn’t required.
To clear the cache:
Stop the SP Timer service. To do this, follow these steps:
Click Start, point to Administrative Tools, and then click
Services.
Right-click SharePoint 2010 Timer, and then click Stop.
Close the Services console.
On the computer that is running Microsoft SharePoint Server 2010 and on which the Central Administration site is hosted, click
Start, click Run, type explorer, and then press ENTER.
In Windows Explorer, locate and then double-click the following folder:
%SystemDrive%\ProgramData\Microsoft\SharePoint\Config\GUID
Notes
The %SystemDrive% system variable specifies the letter of the drive on which Windows is installed. By default, Windows is installed on drive C.
The GUID placeholder specifies the GUID folder. There may be more than one of these.
The ProgramData folder may be hidden. To view the hidden folder, follow these steps:
On the Tools menu, click Folder Options.
Click the View tab.
In the Advanced settings list, click Show hidden files and folders under
Hidden files and folders, and then click OK.
You can also simply type this directly in the path if you do not want to show hidden files and folders.
Back up the Cache.ini file. (Make a copy of it. DO NOT DELETE THIS FILE, Only the XML files in the next step)
Delete all the XML configuration files in the GUID folder (DO NOTE DELETE THE FOLDER). Do this so that you can verify that the GUID folders content is replaced by new XML configuration files when the cache is rebuilt.
Note When you empty the configuration cache in the GUID folder, make sure that you
do NOT delete the GUID folder and the Cache.ini file that is located in the GUID folder.
Double-click the Cache.ini file.
On the Edit menu, click Select All.
On the Edit menu, click Delete.
Type 1, and then click Save on the
File menu. (Basically when you are done, the only text in the config.ini file should be the number 1)
On the File menu, click Exit.
Start the Timer service. To do this, follow these steps:
Click Start, point to Administrative Tools, and then click
Services.
Right-click SharePoint 2010 Timer, and then click Start.
Close the Services console.
Note The file system cache is re-created after you perform this procedure. Make sure that you perform this procedure on all servers in the server farm.
Make sure that the Cache.ini file in the GUID folder now contains its previous value. For example, make sure that the value of the Cache.ini file is not 1.
Check in the GUID folder to make sure that the xml files are repopulating. This may take a bit of time.
BRGS
Mishagri

Project Server 2010 - Updated User Profile - Display Name is Old Name

Similar to question"It shows the Domain\Logon account instead the User Name (up right corner)" but not quite the same. I also checked on the related topics list and could not find a solution.
We have a Resource in Project Server 2010 whose name changed. This included a change to her loginID as well as her email address. I went in to PWA > Server Settings > Security > Manage Users and changed the
Name, Email Address, and User Login Account fields accordingly. When the user goes into Project Server or any of the Project Sites, her old User Name is reflected. If she accesses any other SharePoint site (not associated with Project Server) her
new name shows up in the upper right hand corner of the screen.
We do not have AD Synchronization turned on.
How can we edit the name that appears in the upper right corner of the screen?

Hi,
Use Display name shown on right hand site is not from PWA, its from SharePoint User profile. When we make change to user display name, sometime SharePoint Still retain the old account and also add new account. To fix the issue we have to remove the user
profile from PWA root site.
Open PWA and navigate to following path
Site Actions>>Site Settings>>People and Groups
Click on More from left hand site list of groups
Select appropriate group, belongs to the user
Select the user and from Actions tab remove the user. (you may see two entries old and new), Either you can delete both or click on each account to validate correct user ID.
Once again navigate to PWA>>Server Settings>>Manage User
Edit affected user and click on Save
Have user log on to PWA and validate the result.
Hrishi Deshpande – Senior Consultant DeltaBahn
Blog | < |
LinkedIn
Please click Mark As Answer; if a post solves your problem or Vote As Helpful; if a post has been useful to you.This can be beneficial to other community members reading the thread.

Error - The registration of the service "User Profile Service" has failed. The user profile can not be loaded

I am running an environment with an Active Directory and Terminal Servers.
I have searched high and low for resolutions to this error but I cannot find anything related to my situation, let me explain further.
The fixes I found are related to local users only.
When I create a new user in the Active Directory I provide the paths to the profile folder in the "Remote Desktop Profile" and "Profile tab" lets say for example \\ad001\home\%username% and \\ad001\profil\%username% .
I give rights to the user to read/write the "home" folder which is mapped for folder redirection. An I know that when the user first logs on it should create a "v2.%username%" folder upon successful logon. This is when I am
presented with the error message below:
"The registration of the service "User Profile Service" has failed.
The user profile can not be loaded"
Does anyone have any experience with this or know a suitable fix. Again this is for the "Roaming" profile creation no local.
Many thanks in advance.

Hi,
Thank you for posting in Windows Server Forum.
Did you receive for any one user or for all users?
Have you tried to solve the issue by fixing the user account profile?
For that you can adjust the registry setting “ProfileImagePath” with
particular SID of that user under below mention path.
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList
Also if this can’t resolve the issue you can try to delete the SID of that user or renaming the old and and then check the result again by creating new profile for that users.
More information.
You receive a "The User Profile Service failed the logon” error message
http://support.microsoft.com/kb/947215
Hope it helps!
Thanks.
Dharmesh Solanki

OIM 11g Modify User Profile for Updating End Date

Hi Gurus!
We have an OIM implementation where users may request the creation of other users by means of a Create User request template. In this template we set the End Date to be 3 months after the request date.
In order for the requester to extend the period of a user's OIM user account (along with its provisioned resources) we customized a Modify User Profile by displaying the End Date field and automatically populate it again to 3 months after the request date. Also we developed a custom event handler to enable the user when it is disabled and the End Date is updated to a future date.
This Modify User Profile is working great when the user is still enabled (the End Date is still in the future), however, when the End Date has passed (and the user is Disabled) the requester is not able to see the user when selecting the Modify User Profile request template.
Is there a way to allow requesters to also see disabled users in the Modify User Profile request template?
Thank you in advance.
Regards,

Hi Kevin,
thanks for your reply!
But, in this case, when the user is already disabled due to his End Date, how can a requester, through the Self Service TAB, enable it?
The Enable User request template does not work since when trying to enable the user, OIM sees the End Date is already passed and the DataSet validation throws an exception.
The only way I saw was providing a Modify User Profile Request template to change the End Date and developing a custom event handler to enable the user upon the extension of the End Date...
How can, in this situation, a requester enable the user and extend its End Date?
Thank you!
Regards,

How to populate a sharepoint 2010 list from the active directory. How to populate a sharepoint 2010 list with all sharepoint user profiles

How to populate a sharepoint 2010 from the active directory.
I want a list of all the computers in the active directory,
another one with all users.
I want also to populate a sharepoint 2010 list from the sharepoint user profiles.
Thanks
sz

While
the contacts list is usually filled out for contacts that are outside the company, there are times when you would use a contacts list to store internal and external resources. Wouldn’t it be nice if you didn’t have to re-type your internal contacts’
information that are already in the system? Now you can with a little InfoPath customization on the contacts list.
Here’s our plan:
Create the contacts list, and open in InfoPath
Create a data connection to the User Profile web service
Customize the form adding some text, a people picker and a button
Create InfoPath rules that will populate the contact fields from the user fields in the User Profile store
Let’s get going! Before we begin, make sure you have InfoPath 2010 installed locally on your computer. I also want to give credit Laura
Rogers and Darvish Shadravan’s book Using
Microsoft InfoPath 2010 with Microsoft SharePoint 2010 Step by Step. I know it looks like a lot of steps, but it’s easy once you get the hang of it.
So obviously we need a contacts list. If you don’t already have one, go to the SharePoint site where it will live, and create a contacts list.
From the list, click the List tab on the ribbon, then click Customize form:
So now we have our form open in InfoPath 2010. Let’s add our elements to the form.
Above all the fields, let’s add some text instructing users what to do with the the field we’re about to add (.e.g To enter an existing user’s information, choose the user below).
Insert a people picker control by clicking the Person/Group Picker control in the Controls section of the ribbon. This will add a column to the contacts list called group.
Below the people picker, insert a button control from the same section of the ribbon as above. With the button still highlighted, click the Control Tools|Properties tab on the ribbon.
Then in the Label box, change the text to something more appropriate to our task (e.g. Click here to load user data!).
You can drag the button control a little larger to account for the text.
We should end up with something like this:
Before we can populate the fields with user data, we need to create a connection to the User Profile Service.
Add a data connection to the User Profile Service
Click the Data tab on the ribbon, and click the option From Web Service, and From SOAP Web Service.
For the location, enter the URL of your SharePoint site in the following format – http://<site url>/_vti_bin/UserProfileService.asmx?WSDL. Click Next.
Note - for the URL, it can be any SharePoint site URL, not just to the site where your list is.
For the operation, choose GetUserProfileByName. Click Next.
Click Next on the next two screens.
On the final screen, uncheck the box for “Automatically retrieve data when form is opened”. This is because we are going to retrieve the data when the button is clicked, also for performance reasons.
Now we need to wire up the actions on our button to populate the fields with the information for the user in the people picker control.
Tell the form to read the user from the people picker control
Click the Home tab on the ribbon.
Click the button control we created, and under the Rules section of the ribbon, click Manage Rules. Notice the pane appear on the far right.
In the Rules pane, click New –> Action. Change the name to something like “Query and load user data”.
Leave the condition to default (none – rule runs when button is clicked).
Click the Add button next to “Run these actions:”, and choose “Set a field’s value”.
For Field, click the button on the right to load the select a field dialog. Click the Show advanced view on the bottom. At the top, click the drop down and choose the GetUserProfileByName
(Secondary) option. Expand myFields and queryFields to the last option and highlightAccountName. Click ok.
For Value, click the formula icon. On the formula screen, click the Insert Field or Group button. Again click the show advanced view link, but this time leave the data
connection as Main. Expand dataFields, then mySharePointListItem_RW. At the bottom you should see a folder called group (the people picker control we just added to the form). Expand this, then pc:Person,
and highlightAccountId. Click Ok twice to get back to the Rules pane.
If we didn’t do this and just queried the user profile service, it would load the data of the currently logged in user. So we need to tell the form what user to load the data for. We take the AccountID field from the people
picker control and inject into the AccountName query field of the User Profile Service data connection.
Load the user profile service information for the chosen user
Click the Add button next to “Run these actions:”, and choose Query for data.
In the popup, for Data connection, click the one we created earlier – GetUserProfileByName and clickOk.
We’re closing in on our goal. Let’s see our progress. We should see something like this:
Now that we have the user’s data read into the form, we can populate the fields in the contact form. The number of steps to complete will depend on how many fields you want to populate. We need to add an action step for
each field. I’ll show you one example and then you will just repeat the steps for the other fields. Let’s update the Job Title field.
Populate the contact form fields with existing user’s data
Click the Add button next to “Run these actions:”, and choose “Set a field’s value”.
For Field, click the button on the right to load the select a field dialog. Highlight the field Job Title.
For Value, click the formula icon. On the formula screen, click the Insert Field or Group button. Click the Show advanced view on the bottom. At the top, click the
drop down and choose theGetUserProfileByName (Secondary) option. Expand the fields all the way down until you see the Value field. Highlight it but don’t click ok, but click the Filter
Data button, then Add.
For the first dropdown that says Value, choose Select a field or group. The value field will be highlighted, but click the field Name field
under PropertyData. Click Ok.
In the blank field after “is equal to”, click in the box and choose Type text. Then type the text Title.
Click ok until you get back to the Manage Rules pane. The last previous screen will look like this.
We’re going to update common fields that are in the user’s profile, and likely from Active Directory. You can update fields like first and last name, company, mobile and work phone number, etc. For the other fields, the
steps are the same except the Field you choose to update from the form, and the very last step where you enter the text will change. Here’s what the rules look like when we’re done:
We’re all done, good work! You can preview the form and try it now. Click Ctrl+Shift+B to preview the form. Once you’re satisfied, you can publish the form back to the library. Click File –> Quick
Publish. Once it’s done, you will get confirmation:
Now open your form in SharePoint. From the contact list, click Add new item. Type in a name, and click the button and watch the magic happen!

Windows 2008 R2 Remote Desktop Services - user profile path not working

Trying to setup remote desktop profiles. We have 1 farm with 2 Windows 2008R2 RD session hosts and a broker server and want the all of the remote user profiles to reside on a dedicated profile server. We've created the user shares but when a remote
user logs in their user profiles is automatically created on the session hosts. Each remote users profile path is specified in AD under the user's Remote Desktop Profile tab.
I've seen posts about creating a GPO to handle roaming profiles but I'm not sure as to where this needs to be created...should it be done on each of the session hosts? Are their any step by step instructions out there on how to achieve this that I just haven't
found yet?
bl

Hi,
Thank you for posting in Windows Server Forum.
Do you have RD Gateway setup in your environment?
Have you configure RD Connection Broker and set the Fully Qualified Domain Name (FQDN) of the RD Connection Broker server in case of RD Connection Broker mode. In RD Session mode, it is set to the FQDN of the RD Web Access server.
Client operating systems must trust the certificate with which the RemoteApp programs are signed. Suggest to install RDP 8.1 for client OS.
Do you have a trusted certificate with a matching name configured on your RDSH server in RD Session Host Configuration? (Means cert must match the name that clients use to connect to it for running the RemoteApp).
Hope it helps!
Thanks.
Dharmesh Solanki

How fill r/3 transaction field with current property value of user profile?

Hi Experts!! I
have a transaction iview ("sap_transaction_iview") currently pointing to a R/3 transaction. I want to use the "application parameters" iview field to pass a variable value to the R/3 transaction. We need to pass R/3 userID that we store in property department of portal user profile. Thus, we need to pass dinamically a value as part of name/value pair in application parameter.
How can do achive that?
Thanks in advance to all for your advices and help.
Best Regards,
Rosa Ferrando

Hi,
I think this blog should help you do it. Create a java class or portal project. You can create iView from par then.
How to launch SAP transaction & pass parameters via URL
Here in the same component, you can try getting the user profile attribute and pass it on to this url.
Here is another link about the same topic.
Passing a parameter to a transaction iview
Regards,
Harini S

Authorization object assigning to user profile

Hi all,
Wht are the steps involved in assigning authorization object S_GUI with activity 60 (S_GUI ACTVT=60) to the users profile.
Thanks

you can assign authorization profile to user through Role..
goto PFCG, either create a new role or change an existing role(which the user has)
go to authorization tab, change authorization, click manually button,
add S_GUI and then click on values, select 60.. save the role, generate it..
if it is new role that you have created, then go to SU01 - roles, add it.. save user..

User Profile Service Failed The Logon: (Almost all domain accounts cannot login)

We have a recently imaged a group of workstations with Windows 7 using SCCM 07.
Myself and other administrators can log in to the machines but regular accounts cannot.
We elevated a normal account to administrator and it was not able to log in.
Here are the errors from the event log
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="Microsoft-Windows-User Profiles Service" Guid="{89B1E9F0-5AFF-44A6-9B44-0A07A7CE5845}" />
<EventID>1500</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2011-01-25T19:22:08.724507600Z" />
<EventRecordID>1425</EventRecordID>
<Correlation />
<Execution ProcessID="952" ThreadID="2792" />
<Channel>Application</Channel>
<Computer>xxxx</Computer>
<Security UserID="S-1-5-21-3380481182-2311050411-4097259448-9173" />
</System>
- <EventData>
<Data Name="Error">The system cannot find the file specified.</Data>
</EventData>
</Event>
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="Microsoft-Windows-User Profiles Service" Guid="{89B1E9F0-5AFF-44A6-9B44-0A07A7CE5845}" />
<EventID>1520</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2011-01-25T19:22:08.724507600Z" />
<EventRecordID>1424</EventRecordID>
<Correlation />
<Execution ProcessID="952" ThreadID="2792" />
<Channel>Application</Channel>
<Computer>xxx</Computer>
<Security UserID="S-1-5-21-3380481182-2311050411-4097259448-9173" />
</System>
- <EventData>
<Data Name="Error">The system cannot find the file specified.</Data>
</EventData>
</Event>

Hi,
I would like to suggest you to delete the error SID and create a new profile, and check the result, follow these steps:
Note: Back up the registry before you modify it.
1.
Delete the profile by using the Computer Properties dialog box. To do this, follow these steps:
a)
Click Start, right-click Computer, and then click Properties.
b)
Click Change settings.
c)
In the System Properties dialog box, click the Advanced tab.
d)
Under User Profiles, click Settings.
e)
In the User Profiles dialog box, select the profile that you want to delete, click Delete, and then click OK.
2.
Click Start, type regedit in the Start search box, and then press ENTER.
3.
Locate and then expand the following registry subkey:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList
4.
Right-click the SID that you want to remove, and then click Delete.
5.
Log on to the computer and create a new profile.
What is the result?
Alex Zhao
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Hiding tabs in "user profile" iview (EP7)

Similar Messages

Maybe you are looking for