Highlight and replace text bug?

When selecting a single character, e.g. to change lower case to upper, why does it insert the character instead of replacing it, leaving the original item unchanged? This causes this office a lot of problems when it isn't caught and it happens quite easily. I've looked through the menus and preferences and sure not seeing any setting to override this odd behavior. [and yes I did search the forum for this problem and didn't find anything].
Expected behavior: highlight text, type new character, new character replaces selected character "don't try this at home"
Observed Behavior: Highlight text, type new character, new character is inserted after selected text, selected text remains. "dDon't try this at home"
Pages 5.5.2
OSX 10.10.1

I am using Yosemite 10.10.1 and Pages v5.5.2. I do not have a problem selecting any character, and then typing the replacement character in its place — without any insertion taking place. If clicking and dragging to select a character requires too much dexterity, then click behind the character to be replaced, and then press shift+ left-arrow. This will select the text before the insertion point. You can also click before the character to be replaced, and then press shift+ right-arrow, and that will select the next character.
These keyboard shortcuts are discussed in Pages Help, a menu item from the Help menu.

Similar Messages

Use VBA and Excel to open Dreamweaver HTML (CS5), find and replace text, save and close

I wish to use VBA and Excel to programmatically open numbered Dreamweaver HTML (CS5) and find and replace text in the code view of these files, save and close them.
I have 5000 associations between Find: x0001 and Replace: y0001 in an Excel sheet.
I have the VBA written but do not know how to open, close and save the code view of the ####.html files. Please ... and thank you...
[email protected]

This is actually the code view of file ####.html that I wish to find and replace programmatically where #### is a four digit number cataloguing each painting.... In 1995 I thought this was clever... maybe not so clever now :>)) Thank you for whatever you can do Rob!
!####.jpg!
h2. "Name####"
Oils on acrylic foundation commercial canvas - . xx X xx (inches) Started
Back of the Painting In Progress </p> </body> </html>
Warmest regards,
Phil the Forecaster, http://philtheforecaster.blogspot.ca/ and http://phils-market.blogspot.ca/

Folder action to find and replace text and change line feeds

I want to use a folder action to find and replace text and change Mac carriage returns to DOS line feeds inside text files.
The text to be replaced is: "/Users/wim/Music/iTunes/iTunes Music/Music" (without the quotes)
This text has to be removed (i.e. replaced by an empty string)
The text occurs many times within each file.
The files are playlists exported from iTunes in the M3U format (which are text files). They contain Mac carriage returns. These need to be changed to DOS line feeds.
I have found the following two perl commands to achieve this:
To find and replace text: perl -pi -w -e 's/THIS/THAT/g;' *.txt
To change carriage returns to line feeds: perl -i -pe 's/\015/\015\012/g' mac-file
I know that it's possible to make a folder action with Automator that executes a shell script.
What I want to do is drop the exported playlists in M3U format in a folder so that the folder action will remove the right text and change the carriage returns.
My questions are:
Is it possible to make a folder action that executes command line commands instead of shell scripts?
What is the correct syntax for the two commands when used in a folder action shell script? Especially, how do I escape the slashes (/) in the string to be removed?
Thanks for your help

Ok, I've include an applescript to run a shell command. The applesript command quoted form makes a string that will end up as a single string on the bash command line. Depending on what you want to do, you may need multiple string on the bash command lines. I've included some information on folder actions.
It is easier to diagnose problems with debug information. I suggest adding log statements to your script to see what is going on. Here is an example.
    Author: rccharles
    For testing, run in the Script Editor.
      1) Click on the Event Log tab to see the output from the log statement
      2) Click on Run
    For running shell commands see:
    http://developer.apple.com/mac/library/technotes/tn2002/tn2065.html
on run
    -- Write a message into the event log.
    log " --- Starting on " & ((current date) as string) & " --- "
    -- debug lines
    set desktopPath to (path to desktop) as string
    log "desktopPath = " & desktopPath
    set unixDesktopPath to POSIX path of desktopPath
    log "unixDesktopPath = " & unixDesktopPath
    set quotedUnixDesktopPath to quoted form of unixDesktopPath
    log "quoted form is " & quotedUnixDesktopPath
    try
        set fromUnix to do shell script "ls -l " & quotedUnixDesktopPath
        display dialog "ls -l of " & quotedUnixDesktopPath & return & fromUnix
    on error errMsg
        log "ls -l error..." & errMsg
    end try
end run
How to set up a folder action.
1) right click on folder. click on Enable folder actions
2) Place script in
/Library/Scripts/Folder Actions Scripts
3) right click on folder. click on attach folder action
pick your script.
Create a new folder on the desktop & try.
You can put multiple folder actions on a folder. There are other ways of doing this.
Here is my test script:
on adding folder items to this_folder after receiving dropped_items
    repeat with dropped_item_ref in dropped_items
       display dialog "dropped files is " & dropped_item_ref & " on folder " & this_folder
    end repeat
end adding folder items to
How to make the text into an AppleScript program.
Start the AppleScript Editor
/Applications/AppleScript/Script Editor.app
In Snow Leopard it's at: /Applications/Utilities/AppleScript Editor
Copy the script text to the Applescript editor.
Note: The ¬ is typed as option+return. ption+return is the Applescript line continuation characters.
You may need to retype these characters.
Save the text to a file as an script and do not check any of the boxes below.

Find and Replace text string in HTML

Opps... I hope this forum is not just for Outlook. My Html files reside on my hard-drive. I am looking for VBA code to open specified file names ####File.html and then find and replace text strings within the html for example "####Name" replaced
with "YYYYY"
I drive the "####File.html" names and the find and replace text strings from an Excel sheet. I am an artist and this Sub would give me time to paint instead of find and replace text. Thank you!
[email protected]

Hello Phil,
The current forum is for developers and Outlook related programming questions. That's why I'd suggest hiring anybody for developing the code for you. You may find freelancers, for example. Try googling for any freelance-related web sites and asking such
questions there.
If you decide to develop an Outlook macro on your own, the
Getting Started with VBA in Outlook 2010 article is a good place to start from.

In Pages, how to search and replace text involving invisible characters?

In Pages documents, how to search and replace text involving invisible characters, colors and font sizes—a task which is so easy in Mircosoft Word?

I read that an older version of Pages allowed users to enter special characters in the search/replace fields, but this did not work for me.
Here: http://www.macworld.com/article/1156533/pagesspecialcharacters.html
I still am looking for a way to do this.

How do I find and replace text in PHP files?

How can I in CS3 make sitewide changes to the text in PHP pages without changing variable names etc that have the same name?
For example if I have an installation of a PHP forum and I want to change every instance of the word 'forum' to 'message board'...
If I used the 'inside tag' search with " as the tag, then if "" contained a variable called 'forum' it would also be changed and therefore corrupt the code....
Is there a simple way around this?
Thanks!
I'm using CS3 on Windows Vista.

It looks like you're trying to find and replace source code, so you may be able to look at the various places that are looked at when finding and uncheck the ones that don't apply.
But, if it's all source code then that won't help. One thing that may work is to expand the search option - for example if the work "forum" that you're wanting to change it preceded by another word, or character or something that sets it apart, then do you find on that. You can expand that search phrase as far out in either direction that you need to to make it different, if of course that is practical in your situation.
The only other way I can think of is to somehow create an exception rule, but I'm not sure if that's possible or how to do it.

Applescript: open Pages doc from Templete, change filename and replace text

Hi!
I just got started with applescript and i want a script that does the following:
1. open "choose from list" dialog to choose the topic of my document
from 4 possibilities (here for example A, B, C, D)
2. open document from TemplateXY
3. set document name with date and topic (dd.mm.yyy) "16.02.2011 - A"
4.inside of document: replace text "date" with the currend date (dd.mm.yyy)
and the text "topic" with the topic chosen in (1.) "A"
this is what i already did:
here as colored screenshot:
http://i55.tinypic.com/2mnhxkm.jpg
set datum to do shell script "date \"+%d.%m.%Y\""
--choose topic:
set chosentopic to choose from list {"A", "B", "C", "D"}
--text "topic" becomes replaced throug variable topic
set searchstringT to "topic"
set replacestringT to chosentopic
--text "date" gets replaced by currend date (variable datum)
set searchstringD to "date"
set replacestringD to datum
--open pages, define filename & do search&replace of the strings defined above
tell application "Pages"
activate
set DocName to datum & " - " & chosentopic
set (every text where it is searchstringT) to replacestringT
set (every text where it is searchstringD) to replacestringD
end tell
the "choose from list" dialog works and the variables like topic, datum and the search&replace strings get defined as well
my problems are:
i only get an error that the text could not be replaced
i dont know how to get a new document from a template and how to get its filename changed
i really just started doin things with applescript for a day so i hope you can help me
regards
DaNylz
Message was edited by: DaNylz

Try something like this:
set myFoundItems to change text text of all page items of pages 3 thru 5 of document 1
Shane Stanley <[email protected]>
AppleScript Pro Sessions <http://scriptingmatters.com/aspro>

[Forum FAQ] How to find and replace text strings in the shapes in Excel using Windows PowerShell

Windows PowerShell is a powerful command tool and we can use it for management and operations. In this article we introduce the detailed steps to use Windows PowerShell to find and replace test string in the
shapes in Excel Object.
Since the Excel.Application
is available for representing the entire Microsoft Excel application, we can invoke the relevant Properties and Methods to help us to
interact with Excel document.
The figure below is an excel file:
Figure 1.
You can use the PowerShell script below to list the text in the shapes and replace the text string to “text”:
$text = “text1”,”text2”,”text3”,”text3”
$Excel
= New-Object -ComObject Excel.Application
$Excel.visible = $true
$Workbook
= $Excel.workbooks.open("d:\shape.xlsx")
#Open the excel file
$Worksheet
= $Workbook.Worksheets.Item("shapes")
#Open the worksheet named "shapes"
$shape = $Worksheet.Shapes
# Get all the shapes
$i=0
# This number is used to replace the text in sequence as the variable “$text”
Foreach ($sh in $shape){
$sh.TextFrame.Characters().text
# Get the textbox in the shape
$sh.TextFrame.Characters().text =
$text[$i++]
#Change the value of the textbox in the shape one by one
$WorkBook.Save()
#Save workbook in excel
$WorkBook.Close()
#Close workbook in excel
[void]$excel.quit()
#Quit Excel
Before invoking the methods and properties, we can use the cmdlet “Get-Member” to list the available methods.
Besides, we can also find the documents about these methods and properties in MSDN:
Workbook.Worksheets Property (Excel):
http://msdn.microsoft.com/en-us/library/office/ff835542(v=office.15).aspx
Worksheet.Shapes Property:
http://msdn.microsoft.com/en-us/library/office/ff821817(v=office.15).aspx
Shape.TextFrame Property:
http://msdn.microsoft.com/en-us/library/office/ff839162(v=office.15).aspx
TextFrame.Characters Method (Excel):
http://msdn.microsoft.com/en-us/library/office/ff195027(v=office.15).aspx
Characters.Text Property (Excel):
http://msdn.microsoft.com/en-us/library/office/ff838596(v=office.15).aspx
After running the script above, we can see the changes in the figure below:
Figure 2.
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

Thank you for the information, but does this thread really need to be stuck to the top of the forum?
If there must be a sticky, I'd rather see a link to a page on the wiki that has links to all of these ForumFAQ posts.
EDIT: I see this is no longer stuck to the top of the forum, thank you.
Don't retire TechNet! -
(Don't give up yet - 13,085+ strong and growing)

How to find and replace text in Excel with Automator

I am new to Automator. And I would like some help how I can create a service that will allow me to find and replace certain text in Excel. I noticed that there is an action to do this for Word documents, but not for Excel document.
Any suggestions how I can do this?
Thanks so much for your help.

Easiest way to do it is the following:
- Open the PDF file in Acrobat.
- Go to Tools - Forms - More Form Options - Export Data.
- Save the form data as an XML file somewhere on your system.
- Open XML the file in a plain-text editor (I recommend Notepad++).
- Let's say you want to replace all the years in the dates from "2013" to "2014". Do a global Search&Replace of "2013-" to "2014-" (I added the dash just to make sure that only date fields are edited).
- Save the XML file (maybe under a new name).
- Go back to the PDF file, and now go to Tools - Forms - More Form Options - Import Data.
- Select the edited XML file and import it.
- Done!

Find and replace text in multiple Photoshop files?

Hi there,
Let us say I have six Photoshop files: 1.psd, 2.psd, ..., 6.psd. All of these files contain the word “LoremIpsum” in random text layers, within each document. Is there a way I can search for “LoremIpsum” in all documents and replace it with “Dolor Sit Amet”, all in one go? This is just an example, I need to replace various words, not just one.
I have tried "batch find and replace" software (including powerful tools like Power Grep) but they do not work with psd files… Is there a javascript of external plugin for this kind of task?
Thanks!

You’re welcome, advice given here is free.
If you want to donate something nonetheless you could do so over at
http://ps-scripts.com/bb/
Many of the same people used to contribute there as here and I for one have benefitted considerably from their generous advice on Scripting issues.
A Script can read (or create) txt files, but I do not have a lot of experience with this.
This might work (amend the line »var theTexts = readPref ("….txt", false);« according to your txt-file’s path):
// replace text elements in type layers;
// 2013, use it at your own risk;
#target photoshop
if (app.documents.length > 0) {
          for (var n = 0; n < app.documents.length; n++) {
                    app.activeDocument = app.documents[n];
                    app.activeDocument.suspendHistory("replace text", "main()")
// the opertation;
function main () {
          var myDocument = app.activeDocument;
          var theTexts = readPref ("….txt", false);
          var theArray1 = theTexts.slice(0, Math.round(theTexts.length/2));
          var theArray2 = theTexts.slice(Math.round(theTexts.length/2), theTexts.length);
          alert (theArray1.join("\n")+"\n\n\n"+theArray2.join("\n"))
          for (var b = 0; b < theArray1.length; b++) {
                    replaceText (theArray1[b], theArray2[b])
////// reoplace text //////
function replaceText (replaceThis, replaceWith) {
// =======================================================
var idreplace = stringIDToTypeID( "replace" );
    var desc22 = new ActionDescriptor();
    var idnull = charIDToTypeID( "null" );
        var ref3 = new ActionReference();
        var idPrpr = charIDToTypeID( "Prpr" );
        var idreplace = stringIDToTypeID( "replace" );
        ref3.putProperty( idPrpr, idreplace );
        var idTxLr = charIDToTypeID( "TxLr" );
        var idOrdn = charIDToTypeID( "Ordn" );
        var idAl = charIDToTypeID( "Al " );
        ref3.putEnumerated( idTxLr, idOrdn, idAl );
    desc22.putReference( idnull, ref3 );
    var idUsng = charIDToTypeID( "Usng" );
        var desc23 = new ActionDescriptor();
        var idfind = stringIDToTypeID( "find" );
        desc23.putString( idfind, replaceThis );
        var idreplace = stringIDToTypeID( "replace" );
        desc23.putString( idreplace, replaceWith );
        var idcheckAll = stringIDToTypeID( "checkAll" );
        desc23.putBoolean( idcheckAll, true );
        var idFwd = charIDToTypeID( "Fwd " );
        desc23.putBoolean( idFwd, true );
        var idcaseSensitive = stringIDToTypeID( "caseSensitive" );
        desc23.putBoolean( idcaseSensitive, false );
        var idwholeWord = stringIDToTypeID( "wholeWord" );
        desc23.putBoolean( idwholeWord, false );
        var idignoreAccents = stringIDToTypeID( "ignoreAccents" );
        desc23.putBoolean( idignoreAccents, true );
    var idfindReplace = stringIDToTypeID( "findReplace" );
    desc22.putObject( idUsng, idfindReplace, desc23 );
executeAction( idreplace, desc22, DialogModes.NO );
////// read prefs file //////
function readPref (thePath, binary) {
if (File(thePath).exists == true) {
    var file = File(thePath);
    file.open("r");
    if (binary == true) {file.encoding= 'BINARY'};
    var theText = file.read();
    file.close();
    return String(theText).split(",")
In this case the comma is used to split the text into Strings in Arrays, if your search/replace texts include commas you could use something else, I guess.

Find and Replace text in files

Is there a function that will find and replace a word in a few text files at once. E.G replace the word database1 with database2 without going into each script individually and doing and search and replace.

Andrew, you are being so cruel, hardnuts indeed ;)
I won't mention any names, but at least it's not as cruel as some people saying “You may read DBMS_STATS package specification, at least, to get details, if you're too lazy to read manuals.”
Personally I prefer to use a development tool (TOAD, Pl/Sql Developer) instead of a Text type editor.

Search and Replace text in file using PowerShell

I want to schedule a script in PowerShell to search a directory for an XML file for a particular text string and replace it with a different text string and then save the file with the same name, the name of the file
will change each time the script is run on a daily basis. There will only be one XML file in the location when the scheduled script is run.
I have never used PowerShell but am familiar with batch file commands, can anyone please help!!
KevinS

Hi Kevin,
I’m writing to just check in to see if the suggestions were
helpful. If you need further help, please feel free to reply this post directly so we will be notified to follow it up.
If you have any feedback on our support, please
click here.
Best Regards,
Anna
TechNet Community Support

Search and Replace text

Apologies for what is no doubt a simple question - I'm trying to help out IT and I'm not a programmer, although maybe one day...
Anyway, I'm going to need to read a text file, and search for a string in that text file and replace it. I see "replace" as a function but I'm not familiar with how to use it. Poking around I found <cffile action=append> and used that to add a line to a text document. (Just a notepad .txt)
Ultimately I'll need to unzip a folder, search and replace the string in a specific file in there, and then re-zip the file, but we'll get to that later. I managed to unzip a folder already, that's easy enough. Putting it all together is my current challenge.
I'm using ColdFusion Builder 2.0
Thanks for any help you guys can give.

file.txt: Contains several lines that all say "All Work And No Play Makes Jack A Dull Boy".
<cffile action="read" file="C:\file.txt" variable="myFile">
<cfset myFile = Replace(myFile,"Dull","Bored","all")>
<cffile action="write" file="C:\file.txt" output="#myFile#" addnewline="no" fixnewline="no">
<cffile action="read" file="C:\file.txt" variable="myNewFile">
<cfoutput>#myNewFile#</cfoutput>
^_^

Find and Replace Text box

I have a document with roughly 50 pages. At the bottom of each page is a text box about with my address going across. I moved so I need to update the address, only problem is the address is longer so after using find and replace I would have to go to each text box and re-size. IS there a way to replace them all with new one or is there some way to add footer and I have been doing it wrong all along?
Thanks for your time and help.

This is what master pages are for.
Bob

Search .docx and replace text with image

I've got a directory containing a series of images. The images will always be the same name and I need to insert them into placeholders in a Word document which will be a template. I thought of using the image names as placeholders, opening the document
and searching for the image name, replacing it by inserting the image, and doing so for each image in the directory.
$file is the name of the image in the directory and it loops through them okay.
foreach($file in Get-ChildItem $savepath -Filter *.jpg)
# search word doc and replace selected text with image ($file)
Also inserting the image seems simple enough from a TechNet article I found, but I've got no idea how to open the Word document and do a search and replace. I found a few articles related to the subject but I couldn't get them to work when I tried to adapt
them.
Any help is appreciated. Thanks in advance.

This 'might' be possible, but I'm having a hard time finding good references to the com object capabilities for inserting an image into a word document. Creating new, converting format, that sort of thing is straightforward.
I'd do a search on "powershell word comobject" and variations of insert image update edit, etc. Or maybe someone else with more experience/knowledge has a magic bullet for you. Once you get some info on doing it with powershell, expand
your search by omitting the powershell keyword, there's gotta be some solid documentation for the comobject somwhere, but it will probably be a bit complex.
You can also:
$word = new-object -comobject word.application
$doc = $word.documents.add("<path to word document>"
and get-member to your heart's content, but finding references and/or documentation might be easier.
Good luck!
Edit: This could help, but really doesn't give much insight into placement of the image, only helps getting the image into the doc: http://gallery.technet.microsoft.com/office/44ffc6c8-131f-42f1-b24b-ff92230b2e0a
If you do find something useful, post it here, I'm sure others could benefit!
SubEdit: Should have thought of this already...
http://msdn.microsoft.com/en-us/library/ff837519(v=office.14).aspx

Highlight and replace text bug?

Similar Messages

Maybe you are looking for