Hiss. How to go about it the right way?

Hey all:
The project is a short film we shot on a Sony VX2000 with the camera as the sound recorder. There are two scenes with quite an unacceptable level of hiss.
The mic (Audio-Technica shotgun, AT835) was plugged into a mixer and came out left-channel only. We had the camera recording a mono signal. I mention this only so that you know everything - I don't think it is a contributing factor to the problem as most of the location sound came out fine.
Thing is, ST's Noise Removal isn't really having an effect on it. Same with the Parametric EQ. I understand that sound cleanup is all about compromise and lesser evils, but I'm really not seeing any results beyond the extremes of no change and supremely distorted audio.
I'm not audio man, it's a meager project, trying to get our feet wet. ADR and a reshoot is possible (albeit in a few month's time), so I just want to know if the audio is beyond saving or whether I'm just failing. If anyone with more experience would be willing to recieve a sample of the problem and advise me further.
Thanks in advance for the help.
Michael

can you isolate a section of the footage that has ONLY the hiss? if so, you should be able to set that as your Noise Print and then perform a removal. if that doesn't cut it you may have to roll up your sleeves and use some parametric EQ.

Similar Messages

Implicit Fact Column - am I thinking about this the right way?

My exploration of the Implicit Fact Column is below. Let me know if you think this is the intended usage.
When the BI Server sees a request where one Dimension is being constrained by another, it has to pick a fact table that contains references to these two dimensions. The "Implicit Fact Column", which is set in the Presentation Layer of the RPD is used to guide the BI Server towards one or more Fact tables that can be used to satisfy the request. In the absence of the Implicit Fact Column, I noticed that the BI Server was choosing random fact tables so I went exploring how this feature worked. I set the Implicit Fact column in my Presentation layer and then went looking to see how the queries were generated.
For my example, my two dimensions are Program and Channel. I want to see the list of Channels available for a Program. Without the Implicit Fact Column, the queries are of the form:
select distinct T289.CHANNEL_NAME as c1,
T36001.PROGRAM_NAME as c2
from
DIM_PROGRAMS T36001,
DIM_CHANNELS T289,
SomeRandomFactTable T41210
where ( T289.DIM_CHANNEL_KEY = T41210.DIM_CHANNEL_KEY and T36001.DIM_PROGRAM_KEY = T41210.DIM_PROGRAM_KEY )
order by c1, c2
The nice part about this is that there is only one set of Program / Channel combinations returned. The downside is that the Fact table that is chosen to resolve the combinations can be any Fact table under the purview of the BI Server. It doesn't even have to be in the same subject area where the Program and Channel were chosen. When I set the Implicit Fact Column, the queries are of the form:
select distinct T289.CHANNEL_NAME as c1,
T36001.PROGRAM_NAME as c2,
T35832.DIM_SITE_KEY /* this is the implicit fact column */
from
DIM_PROGRAMS T36001,
DIM_CHANNELS T289,
AFactTableMappedToFactColumn T35832
where ( T289.DIM_CHANNEL_KEY = T35832.DIM_CHANNEL_KEY and T35832.DIM_PROGRAM_KEY = T36001.DIM_PROGRAM_KEY )
order by c1, c2
I was happy that I could predict what Fact table was being used, but now the results are wrong as I get a duplicate set of records for every DIM_SITE_KEY / Channel / Program combination. I decided to play a little Algebra trick. Knowing that the DIM_SITE_KEY was a numeric value, I defined the Implicit fact column as DIM_SITE_KEY / DIM_SITE_KEY which will always result in a value of 1. Now I get queries that look like:
select distinct T289.CHANNEL_NAME as c1,
T36001.PROGRAM_NAME as c2,
T35832.DIM_SITE_KEY / nullif( T35832.DIM_SITE_KEY, 0) as c3
from
DIM_PROGRAMS T36001,
DIM_CHANNELS T289,
AFactTableMappedToFactColumn T35832
where ( T289.DIM_CHANNEL_KEY = T35832.DIM_CHANNEL_KEY and T35832.DIM_PROGRAM_KEY = T36001.DIM_PROGRAM_KEY )
order by c1, c2
Since DIM_SITE_KEY / DIM_SITE_KEY is always equal to 1, I only get one set of Program / Channel combinations. I get the added bonus of knowing which set of Fact tables are going to be used to satisfy the request.

Perfect Analysis, But one important note is when using implicit fact table, Always select measure( Which has some aggregation) as a implicit fact column. So that will allows the query will eliminate duplicate rows by doing a group by operation.
Other note is make sure performance is good. When we don't have a good model for fact tables, when the tables contains large set of data, make sure performance is good by doing indexes or caching to load the prompts.
- Madan

Am I going about this the right way?

Hello,
I will place the code below. I have a JTextArea that I want to read the input of my process out to. I start a process which is just a shell script from the gui using the run button and I want to get what the script is outputting, onto the screen in my JTextArea. Any Ideas would be greatly appreciated. Thanks.
import javax.swing.*;
import java.awt.event.*;
import java.io.*;
import java.awt.*;
//Sets up gui with run and cancel button, and text field for the I.P//
public class OrderVodScript extends javax.swing.JFrame implements ActionListener {
    JTextField enterIp = new JTextField(16);
    JButton run = new JButton("Run");
    JButton cancel = new JButton("Cancel");
    public OrderVodScript() {
        super("Order VOD Script");
        setSize(900, 500);
        setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
        JPanel pane = new JPanel();
        JLabel enterIpLabel = new JLabel("Enter I.P Address or Full Path To A File Of I.P Addresses: ");
        pane.add(enterIpLabel);
        pane.add(enterIp);
        pane.add(run);
        pane.add(cancel);
        cancel.addActionListener(this);
        run.addActionListener(this);
        JPanel textPane = new JPanel();
        JTextArea text = new JTextArea(20,70);
        JScrollPane scrollPane = new JScrollPane(text);
        //Put them together
        FlowLayout flow = new FlowLayout();
        setLayout(flow);
        add(pane);
        add(scrollPane);
        setVisible(true);
    //Method to tell which button was pressed//
public void actionPerformed(ActionEvent evt) {
    Object source = evt.getSource();
    if (source == cancel) {
      System.exit(0);
} else if (source == run) {
      String ip = enterIp.getText();
     try {
          Process child = new ProcessBuilder("testvodscript" +ip).start();
          BufferedReader input = new BufferedReader(new
          InputStreamReader(child.getInputStream()));
          input.readline(text);
   } catch (IOException e) {
                    e.printStackTrace();
   public static void main(String[] arguments) {
   OrderVodScript order = new OrderVodScript();
}

close...
String NL = System.getProperty("line.separator");
String line = "";
BufferedReader input = new BufferedReader(new
          InputStreamReader(child.getInputStream()));
while((line = input.readline()) != null) {
   text.append(line + NL);
}

How to create a custom panel in the right way (without having an empty panel in the file info) ?

Hi Everyone
My name is Daté.
I'm working in the fashion industry as a designer and Design consultant to help fashion brands improving the design workflow by using Adobe softwares and especially Illustrator.
I'm not a developper, but i'm very interested about the possibility to introduce xmp technology to provide more DAM workflows in the fashion industry.
Fashion designers produce a lot of graphical objects in illustrator or Photoshop. Unfortunately they are faced to a big challenge which is about how to manage, search, classify and get this files faster. Of course PDM system or PLM system are used in the Fashion industry to manage data, but for many companies, implemanting this kind of database is very complex.
When i look at what you can do with xmp, it seems to be an interesting way of managing design files, then i started to follow Adobe instruction to try to build a custom panel.
The main idea is to (Theory) :
create custom panels used by fashion designers to classify their design files.
Use Adobe Bridge to search files, create smart collection to make basic reports in pdf and slideshows
Find someone to make a script able to export metadata in xml files
Use indesign and the xml file to generate automatically catalogues or technical sheets based on xmp values
I have created a custom panel by using the generic panel provided by Adobe and i have modified the fields to feet with the terms used in the fashion industry and it works well.
But unfortunately, when i try to create my own custom panel from scratch with Flashbuilder (4.6) and the Adobe CSExtensionBuilder_2 (Trial version), it doesn't work!
Here is the process :
I have installed flashbuilder 4.6
I have download the XMP Fileinfo SDK 5.1 and placed the com.adobe.xmp.sdk.fileinfo_fb4_1.1.0.jar in C:\Program Files (x86)\Adobe\Adobe Flash Builder 4.6\eclipse\plugins
In Flashbuilder, i have created a new project and select xmp Custom panel
The new project is created in flashbuilder with a field with A BASIC Description Field
To generate the panel, right click the project folder and select xmp / Publish Custom Panel
The panel is automatically generated in the following folder : C:\Users\AppData\Roaming\Adobe\XMP\custom file info panels\3.0\panels
Go to illustrator, Open the file Info
The panel appears empty
The others panel are also empty
The panel is created and automatically placed in the right folder, but when you open it in Illustrator by selecting the File Info option in the File Menu, this custom panel appears empty!!! (only the title of the tab is displayed). This panel also prevent the other panels to be displayed.
When you delete this custom panels from the folder C:\Users\AppData\Roaming\Adobe\XMP\custom file info panels\3.0\panels and go back to the File Info, the other panels display their content properly.
I also try to use the plugin XMP Namespace designer to create my own namespace. this plugin is also able to generate a custom panel, but this one also appears empty in AI or Photoshop.
I try to follow the process described in Adobe xmp documentation many times, but it didn't works.
It seems that many peaople have this issue, but i dodn't find a solution in the forum.
I try to create a trust file (cfg), but it didn't work.
It would be so kind if you can help me to understand why i can't create a custom panel normally and how to do it in the right way.
Thanks a lot for your help,
Best regards,
Daté

Hi Sunil,
After many trial, i realize the problem was not coming from the trust file, but from the way i have created the custom panel.
There is 2 different ways, the first described below is not working whereas the second is fine :
METHOD 1 :
I have downloaded the XMP-Fileinfo-SDK-CS6
In the XMP-Fileinfo-SDK-CS6 folder, i copied the com.adobe.xmp.sdk.fileinfo_fb4x_1.2.0.jar plugin from the Tools folder and i pasted it in the plugind folder of Flashbuilder 4.6
The plugin install an XMP project
In Flashbuilder 4.6 i have created a new project (File / New /Project /XMP/XMP Custom Panel)
A new xmp project is created in flashbuilder.
You can publish this project by right clicking the root folder and selecting XMP / Publish Custom Panel
The custom file info panel is automatically published in the right location which is on Mac : /Users/UserName/Library/Application Support/Adobe/XMP/Custom File Info Panels/3.0 or /Users/UserName/Library/Application Support/Adobe/XMP/Custom File Info Panels/4.0
Despite the publication of the custom file info panel and the creation of a trust file in the following location : "/Library/Application Support/Macromedia/FlashPlayerTrust", the panel is blank in Illustrator.
I try this way several times, with no good results.
METHOD 2 :
I have installed Adobe CSExtensionBuilder 2.1 in Flash Builder
In FlashBuilder i have created a new project (File / New /Project /Adobe Creative Suite Extension Builder/XMP Fileinfo Panel Project)
As the system display a warning about the version of the sdk to use to create correctly a custom file info, I changed the sdk to sdk3.5A
The warning message is : "XMP FileInfo Panel Projects must be built with Flex 3.3, 3.4 or 3.5 SDK. Building with Flex 4.6.0 SDK may result in runtime errors"
When i publish this File info panel project (right click the root folder and select Run as / Adobe illustrator), the panel is published correctly.
The last step is to create the trust file to display the fields in the panel and everything is working fine in Illustrator.
The second method seems to be the right way.
For sure something is missing in the first method, and i don't understand the difference between the XMP Custom Panel Project and the XMP Fileinfo Panel Project. Maybe you can explain it to me.
So what is the best solution ? the right sdk to use acording to the creative suite (the system asks to use 3.3 or 3.5 sdk for custom panels, so why ?)
I'm agree with Pedro, a step by step tutorial about this will help a lot of peaople, because it's not so easy to understand!!!
Sunil, as you belong to the staff team, can you tell me if there is :
A plugin or a software capable to extract the XMP from llustrator files to generate XML workflows in Indesign to create catalogues
A plugin to allow indesign to get custom XMP in live caption
A plugin to allow Bridge to get custom XMP in the Outputmode to make pdf or web galeries from a smart collection
How can you print the XMP data with the thumbnail of the file ?
Thanks a lot for your reply.
Best Regards
Daté

Setting up Lightroom the right way

I have jsut ordered Lightroom 3.0. I
should have it a few days. I woould like to know if there is any
information out there on how to set it up the right way on a first time install. At present i am running Photoshop Elements 8.0 and was wondering if Lightroom automaticly brings my files in from PSE or do i have to do it. Also is there anything i should do with my files in PSE to make a smooth transition to LR 3.0.

All godd infromation. Thanks to you all for your hellp.
Happy Holidays to you.
Jeff

I want to be a good SAP user but please help me how and can i do the right step about SAP

i want to be a good SAP user but please help me how and can i do the right step about SAP

Hi,
you can start learning SAP from an end-user/key-user perspective with the online learning portal of SAP Learning Hub, business user edition.
Further information can be found here:
SAP Learning Hub
Regards,
Arnold

How can I print in the right hand corner of the paper (no borders)?

How can I print in the right hand corner of the paper (no borders). I have Adobe 7.

Is that elements 7 or photoshop 7? It can make a difference.
What you can do is create a new document that is the size of the paper, then place your document in the new document. You can now align your document to the right side of the page.
Now print.
Borders can have two meanings here. You can add a border to an image such as a stroke for example. The other meaning is the printer has a non-printing area called a border.
In the former there is nothing to do as long as you did not add one. In the latter some printers do have a print to edge option, but it has to be a feature of that printer. It would be located in the print options. If the printer does not have such a feature, there is nothing you can do, short of manually cutting the paper with a paper cutter, scissors, or x-acto knife.

Having read how one might be able to send a video that is too large, it seems that those videos and still pictures that are sent, well at least for me anyway, end up 90 degrees to the horizontal...how do i send a pic, or video that is the right way up???.

my question relates to the orientation of the videos, and still pictures that are sent via the ipad2...they always seem to be 90 degrees to the horizontal...can anyone suggest how to send them so that they will be the right way up???

my question relates to the orientation of the videos, and still pictures that are sent via the ipad2...they always seem to be 90 degrees to the horizontal...can anyone suggest how to send them so that they will be the right way up???

How to approach ABAP OO programming the right way...

Hello experts,
I am an old school procedural ABAP programmer and I recently I have been experementing with ABAP Objects since I've read a few columns the advantages of ABAP OO and also currently learning its syntax. Now, does ABAP Objects conform to the old way of say, doing reports like at selection-screen output, at selection-screen, on value-request for..., start-of-selection, end-of-selection, top-of-page, etc. I have been doing some practice programs and I am not sure if my approach is correct. Example, I created a class named cl1 and I have a method named upload. Now, the UPLOAD method contains the function 'GUI_UPLOAD'. Is this the right way of doing it? Also, How come I cannot create structures inside a class?
Again, thanks guys and have a nice day!

Hi,
I have these three progs from one of the previous posts.
Good approach on using constructors. I am not finding the original link.
*& Report ZABAP_OBJ_01 *
REPORT zabap_obj_01 .
PARAMETERS : p_vbeln LIKE vbap-vbeln OBLIGATORY,
             p_matnr LIKE mara-matnr.
TYPES : BEGIN OF ty_vbap,
vbeln TYPE vbap-vbeln,
matnr TYPE vbap-matnr,
arktx TYPE vbap-arktx,
END OF ty_vbap.
* CLASS sales_order DEFINITION
CLASS sales_order DEFINITION.
PUBLIC SECTION.
    DATA : v_matnr TYPE mara-matnr,
    v_vbeln TYPE vbap-vbeln.
    METHODS : constructor IMPORTING vbeln TYPE vbap-vbeln
    matnr TYPE mara-matnr OPTIONAL.
    DATA : it_vbap TYPE STANDARD TABLE OF ty_vbap.
    METHODS : get_vbap_details,
    disp_vbap_details.
ENDCLASS. "sales_order DEFINITION
* CLASS sales_order IMPLEMENTATION
CLASS sales_order IMPLEMENTATION.
METHOD get_vbap_details.
    CLEAR : it_vbap.
    REFRESH : it_vbap.
    SELECT vbeln
    matnr
    arktx
    FROM vbap
    INTO TABLE it_vbap
    WHERE vbeln = p_vbeln.
ENDMETHOD. "get_vbap_details
METHOD constructor.
    CLEAR : v_vbeln,
    v_matnr.
    v_vbeln = vbeln.
    v_matnr = matnr.
ENDMETHOD. "constructor
METHOD disp_vbap_details.
    DATA : wx_vbap LIKE LINE OF it_vbap.
    LOOP AT it_vbap INTO wx_vbap.
      WRITE :/ wx_vbap-vbeln,
      wx_vbap-matnr,
      wx_vbap-arktx.
    ENDLOOP.
    CLEAR : it_vbap.
ENDMETHOD. "disp_vbap_details
ENDCLASS. "sales_order IMPLEMENTATION
DATA : obj TYPE REF TO sales_order.
START-OF-SELECTION.
IF NOT p_matnr IS INITIAL.
    CREATE OBJECT obj EXPORTING vbeln = p_vbeln
    matnr = p_matnr.
ELSE.
    CREATE OBJECT obj EXPORTING vbeln = p_vbeln.
ENDIF.
CALL METHOD obj->get_vbap_details.
CALL METHOD obj->disp_vbap_details.
*& report ziga_abapobjects_asgn01 *
REPORT ziga_abapobjects_asgn01 .
PARAMETER : p_matnr LIKE mara-matnr.
* CLASS lcl_material DEFINITION
CLASS lcl_material DEFINITION.
PUBLIC SECTION.
    DATA: v_matnr TYPE mara-matnr.
    METHODS : constructor IMPORTING matnr TYPE mara-matnr,
    get_material_description.
PRIVATE SECTION.
    DATA : v_maktx TYPE makt-maktx.
ENDCLASS. "lcl_material DEFINITION
* CLASS lcl_material IMPLEMENTATION
CLASS lcl_material IMPLEMENTATION.
METHOD get_material_description.
    CLEAR v_maktx.
    SELECT SINGLE maktx INTO v_maktx
    FROM makt
    WHERE matnr = v_matnr AND
    spras = 'E'.
ENDMETHOD. "get_material_description
METHOD constructor.
    CLEAR v_matnr.
    v_matnr = matnr.
ENDMETHOD. "constructor
ENDCLASS. "lcl_material IMPLEMENTATION
DATA : obj TYPE REF TO lcl_material.
START-OF-SELECTION.
CREATE OBJECT obj EXPORTING matnr = p_matnr.
CALL METHOD obj->get_material_description.
prg3)
report ziga_abapobjects_asgn01 .
PARAMETER : p_matnr LIKE mara-matnr.
* CLASS lcl_material DEFINITION
CLASS lcl_material DEFINITION.
PUBLIC SECTION.
    METHODS : constructor IMPORTING matnr TYPE mara-matnr,
    write_material_desc.
    CLASS-METHODS : class_constructor.
PRIVATE SECTION.
    CLASS-DATA: v_matnr TYPE mara-matnr.
    DATA : v_maktx TYPE makt-maktx.
    METHODS : get_material_description.
ENDCLASS. "lcl_material DEFINITION
* CLASS lcl_material IMPLEMENTATION
CLASS lcl_material IMPLEMENTATION.
METHOD get_material_description.
    CLEAR v_maktx.
    SELECT SINGLE maktx INTO v_maktx
    FROM makt
    WHERE matnr = v_matnr AND
    spras = 'E'.
ENDMETHOD. "get_material_description
METHOD constructor.
    WRITE :/ 'Inside Instance Constructor'.
    CLEAR v_matnr.
    v_matnr = matnr.
    CALL METHOD get_material_description.
ENDMETHOD. "constructor
METHOD write_material_desc.
    WRITE :/ 'Material Description :', v_maktx.
ENDMETHOD.                    "write_material_desc
METHOD class_constructor.
    WRITE :/ 'Inside Static Constructor'.
ENDMETHOD.                    "class_constructor
ENDCLASS. "lcl_material IMPLEMENTATION
DATA : obj TYPE REF TO lcl_material,
obj1 TYPE REF TO lcl_material.
START-OF-SELECTION.
CREATE OBJECT obj EXPORTING matnr = p_matnr.
CALL METHOD obj->write_material_desc.
CREATE OBJECT obj1 EXPORTING matnr = '000000000000000110'.
CALL METHOD obj1->write_material_desc.
CALL METHOD obj->write_material_desc.
prg4)
report ziga_abapobjects_asgn01 .
PARAMETER : p_matnr LIKE mara-matnr.
* CLASS lcl_material DEFINITION
CLASS lcl_material DEFINITION.
PUBLIC SECTION.
    METHODS : constructor IMPORTING matnr TYPE mara-matnr,
    write_material_desc,
    get_material_description.
    CLASS-METHODS : class_constructor.
PRIVATE SECTION.
    CLASS-DATA: v_matnr TYPE mara-matnr.
    DATA : v_maktx TYPE makt-maktx.
ENDCLASS. "lcl_material DEFINITION
* CLASS lcl_material IMPLEMENTATION
CLASS lcl_material IMPLEMENTATION.
METHOD get_material_description.
    CLEAR v_maktx.
    SELECT SINGLE maktx INTO v_maktx
    FROM makt
    WHERE matnr = v_matnr AND
    spras = 'E'.
ENDMETHOD. "get_material_description
METHOD constructor.
    WRITE :/ 'Inside Instance Constructor'.
    CLEAR v_matnr.
    v_matnr = matnr.
ENDMETHOD. "constructor
METHOD write_material_desc.
    WRITE :/ 'Material Description :', v_maktx.
ENDMETHOD.                    "write_material_desc
METHOD class_constructor.
    WRITE :/ 'Inside Static Constructor'.
ENDMETHOD.                    "class_constructor
ENDCLASS. "lcl_material IMPLEMENTATION
DATA : obj TYPE REF TO lcl_material,
obj1 TYPE REF TO lcl_material.
START-OF-SELECTION.
CREATE OBJECT obj EXPORTING matnr = p_matnr.
CALL METHOD obj->get_material_description.
CALL METHOD obj->write_material_desc.
CREATE OBJECT obj1 EXPORTING matnr = '000000000000000110'.
CALL METHOD obj1->get_material_description.
CALL METHOD obj1->write_material_desc.
CALL METHOD obj->get_material_description.
CALL METHOD obj->write_material_desc.
REPORT ziga_abapobjects_asgn01 .
PARAMETER : p_matnr LIKE mara-matnr.
* CLASS lcl_material DEFINITION
CLASS lcl_material DEFINITION.
PUBLIC SECTION.
    CLASS-METHODS : write_material_desc,
    get_material_description,
    class_constructor.
PRIVATE SECTION.
    CLASS-DATA: v_matnr TYPE mara-matnr.
    CLASS-DATA: v_maktx TYPE makt-maktx.
ENDCLASS. "lcl_material DEFINITION
* CLASS lcl_material IMPLEMENTATION
CLASS lcl_material IMPLEMENTATION.
METHOD get_material_description.
    CLEAR v_maktx.
    SELECT SINGLE maktx INTO v_maktx
    FROM makt
    WHERE matnr = v_matnr AND
    spras = 'E'.
ENDMETHOD. "get_material_description
METHOD write_material_desc.
    WRITE :/ 'Material Description :', v_maktx.
ENDMETHOD.                    "write_material_desc
METHOD class_constructor.
    WRITE :/ 'Inside Static Constructor'.
    v_matnr = '000000000000000110'.
ENDMETHOD.                    "class_constructor
ENDCLASS. "lcl_material IMPLEMENTATION
START-OF-SELECTION.
CALL METHOD lcl_material=>get_material_description.
CALL METHOD lcl_material=>write_material_desc.
Arun Sambargi.

How do I share / unlink the right and left channel, so I can work with them individually ?

I use "Adobe Sound Booster CS5"
I have a stereo soundtrack, which I only want to remove noise in only one channel (right).
How do I share / unlink the right and left channel, so I can work with them individually ?

When Soundbooth was first developed, it had a few extra things than what were not available in Audition. However, Audition remained the more high end sound editing tool. Soundbooth was locked to a multiple channel editing approach. In Audition, single editing is easy - you simply click the L or R at the right end of the sound channel to lock it and then you can edit the other channel only.
Soundbooth has been discontinued and Audition now has taken its place from CS6 to the Creative Cloud.
The above is some background info. To your current situation, you can use a workaround like:
* Export your audio file to separate channels by File > Export > Channels to mono files.
You will get 2 files with _L and _R suffix.
You can then edit them separately. You can go from Mono to Stereo by the following step.
Or
* Choose - Edit > Insert > Channels into New Multitrack file.
That will separate the Left and Right Channels and add them to a new multitrack file.
You can then click the Edit link at the top right of the channel to edit it.
You can then save that file as a new audio file.
Dean

Can anyone tell me how i go about downloading the free dock app for the ipod touch?

hi,can anyone tell me how to go about downloading the free dock app for the ipod touch gen 4?

What "free dock app"?

I've filmed The Mill in flood from my iPhone 4s, but when I got it on my laptop it's up-side-down, how do I turn a film the right way up so I can up-load to FB?

I've filmed The Mill in flood from my iPhone 4s, but when I got it on my laptop it's up-side-down, how do I turn a film the right way up so I can up-load to FB?

You can load it from your iphone directly to facebook?

I have just purchased a new computor. I had Lightroom 5.7 on the old computor and need to know how to go about downloading the program to my new computor. Thanks for any help you can provide.

I have just purchased a new computor. I had Lightroom 5.7 on the old computor and need to know how to go about downloading the program to my new computor. Thanks for any help you can provide.

Lightroom - all versions
Windows
http://www.adobe.com/support/downloads/product.jsp?product=113&platform=Windows
Mac
http://www.adobe.com/support/downloads/product.jsp?product=113&platform=Macintosh

Ok so how do I delete the "Rebuilt Library" the right way?

I just tried to rebuild a totally messed up library. But the Library Manager failed to import over 1,000 of my photos. (iPhoto telling me it doesn't have enough memory to function.
I imagine I will be able to rebuild the library again once I move the library to my external hard drive. Right? Can someone let me know the right way to set that up? I have been searching through old posts but can only find people talking about problems after the library has already been moved.
Thanks a lot.

Since you speak of a "rebuild Library" I assume that you used iPhoto Library manager and still have your original library too. If this is not correct stop and post the correct information
quit iPhoto and drag the "rebuilt library" to the trash and drag the iPhoto library to your external drive - you might want to wait to empty the trash until everything is done and good. Launch iPhoto while depressing the option (alt) key and use the select library option to point to the iPhoto library that you just drug to the EHD. Now you should have iPhoto running with the original (presumedly messed up) library - use IPLM to do yoru rebuild now
LN

I close out firefox the right way each time. Why dose it keep saying Opps seems firefox has crashed.. Every time...

I have checked for all updates and there are none.. Why dose Firefox keep saying OPPPPPS well this is embarrassing , seems that your session has crashed.. Well I know it dose not crash because I close it out each and every time the right way....Can anyone tell me how to fix this issue.. It is really annoying.. Also I have tried each and everything I have found to try and nothing is working..

hello Marlin29, this is currently a problem in firefox when you first close all open firefox windows and then close the application afterwards - the bug should be addressed in a later version of firefox.
as a workaround in the meanwhile you could close firefox (through firefox > quit) while the browser window is still running or try this: enter about:config into the firefox location bar (confirm the info message in case it shows up) & search for the preference named '''browser.sessionstore.resume_from_crash'''. double-click it and change its value to '''false'''.

Hiss. How to go about it the right way?

Similar Messages

Maybe you are looking for