How am I meant to correct my Framemaker files to solve this Acrobat Distiller error?

When I attempt to generate a PDF from Framemaker 9 using Distiller 8.1 I get the following error:
%%[ Error: ioerror; OffendingCommand: imageDistiller; ErrorInfo: DCTDecodeFilter Second SOI or SOFn JPEG marker is disallowed ]%%
Stack:
-dict-
%%[ Flushing: rest of job (to end-of-file) will be ignored ]%%
%%[ Warning: PostScript error. No PDF file produced. ] %%"
No PDF is created. I've tried 'save as' and 'print'. I have created a PDF from this document several times before with no issues. I haven't replaced any of the screenshots in this version. Where can I find the graphic that is causing the problem? How can I solve this?
Thanks,
Niall.

1. To turn "off" the graphics, simply use the esc v v shortcut (this is a toggle on/off) at the book level (no need to remove anything).
2. Render in Error's context means, then run it again with no graphics visible (but it's obvious from the Distiller error messages that the problem is in a JPEG that can't be properly interpreted).
3. To isolate the page containing the errant graphic, a binary search apporach means do one half at a time, i.e. the first half of the book abd then the second half, to see where the error occurs. Then split the offending half section into two-halves again and re-create the PDF until you've narrowed down to the page with the error-prone file.
However, you indicate that you're able to create the PDFs properly when printing wthout Generate Acrobat Data enabled. What is you default printer instance and which joboptions are specified?

Similar Messages

How to batch process (color correct) multiple MXF files?

Newb here with a question I cannot find an answer for. I'm very new to CS5.5 and am very frustrated with something that should be a simple procedure, at least it was with my last NLE.
I am shooting amateur hockey games using a Canon XF100. Typically I shoot at 720 60p and with all the starts and stops of the game there may be 30-40 MFX files for a game. I'm having no problems importing into CS5.5, the files all show up on the timeline.
I want (need) to be able to color correct ALL these files at once using the fast color corrector and/or the 3 way color balance. For the life of me I cannot seem to do this and I cannot find any answers despite many hours of searches.
Last night I did (after much mucking around) manage to 'nest' the files and do the color correction but when I went to export to Media Encoder (to render as MP4 file) I kept getting error messages and was unable to proceed. This happened 6 times, the encoding would start and then after about 20 minutes, and some progress, it would give me an error message.
Can someone please, pretty please!, explain a simpler way to do this? I feel like I am missing a very obvious step and I'm probably just phrasing the question incorrectly.
Many thanks in advance.
Dave
Adobe CS5.5, Windows 7 Premium
Intel i7
9 GB Ram
500 GB Velociraptor HDD
Dual 27" monitors

Unfortunately, you're doing it exactly in the right way. I just nested a sequence and applied the Fast Color Corrector to the nest and it exported beautifully. Could you try nesting and color correcting a short sequence with clips other than the MXF files generated by the Canon XF100 using the same methodology? I'm trying to see if it's your footage is the issue or something else.

TS1702 Does any one know how to solve this iPod touch error: I am tryin to pay for an app but I can because it says that I don't have enough space when I actually have more than enough space to download it so please help me

Does anyone know how to solve this problem: I a trying to download a paid app but I cannot because the AppStore says that info not have enough space to download it even though I have more than enough space so if any of you know what can solve this problem then please let me know

The app is compressed and needs swap space to install. As a rule of thumb you need 3 times the listed size of the app available, or in your case 4.6GB. You only have 1.7GB.

How to solve this probleme in error message RJ012 when extract co-pa ?

Hello everyone:
    When I extract co- pa data source in t-code Rsa3 ,It is a error message which is Errors occurred during the extraction(message id RJ012).
     Please help me to solve this problem!
     Thanks!

Hi Amit:
ST22 and SM21 do not show any dump under my username.
In RSA3, I am able to extract the delta for the datasource COPA.
When it is on delta update then i am gettign the 0 records, when i changed to "F" it is giving me the error 'Errors occurred during the extraction' and the error messege says "Errors occurred during the extraction Message no. RJ012
I enter a (correct) value in field 'Target sys', too.
Why it is not correct?
Thanks and Regards!
Lian

How to solve this Folio Builder error :

We have uploaded 18 magazine titles on DPS for the month of December and for some reason magazine with large file size cannot be accessed.
Can you provide information on how to solve this error:
" Folio Builder error: An error has occured while loading your documents from the server. Network failure."
thanks,

Have a look at these docs:
E-CA Change Assistant gives error: All agents should be running and sending pulses for all application, batch, file and web servers for the environment before the Change Assistant is started (Doc ID 1073464.1)
E-CA: PT8.53, PT8.52, PT8.51, PT8.50: EMF Agents not Finding Configuration Files for App Server, Batch Server (Doc ID 1080590.1)

How do I load color corrected RMD (RED) files in CS5.

I have edited RED footage in cs5.
I now have received color corrected RMD files - however I don't see the color correction on any clips in the timeline.
What do I need to do to make sure edited footage (R3D files) on the timeline reflect color correction.
I tried replacing footage, it didn't work - if I import the R3D again, apply the cuts and place on timeline I see color correction but I am sure there's a better way to do this. Any pointers will be great.
Thanks.
RV

The following text from Adobe seems to indicate that there is "more" with CS5.5:
(taken from: http://www.adobe.com/products/premiere/extend.displayTab2.html#REDSupport)
The RED R3D Source Settings dialog box in Adobe Premiere Pro CS5.5 offers extensive control over the look of RED raw footage. In conjunction with the ability to change color settings per clip, you can save combinations of adjustments as custom presets, which can be applied to individual or multiple clips. The controls in the Source Settings dialog box include:
Debayer Detail — Vary the level of detail extracted from the image sensor.
Chroma — Denoise the red/blue channels.
OLPF Compensation — Eliminate color Moire fringes by controlling the optical low-pass filter (OLPF) that refines edge detail.
Maximum Bit Depth — Use this global setting to choose between 32-bit float and 8-bit.
White Balance — Manipulate Kelvin, Tint, and Saturation levels.
Timecode — Select the timecode track to use from the R3D file.
Color Settings — Adjust the ISO setting, exposure, red, green, blue, brightness, contrast, and highlight levels.
Color Space — Select the desired color space from among Camera RGB For RAW; Rec 709, the standard color space for HD; and REDspace, which is a more saturated variation of Camera RGB.
Gamma Curve — Override the gamma curve selection using several preset gamma curves.
User Curve — Use a custom curve created by the camera operator.
Jim

How can I find and correct corrupt Catalog files on Elements 9?

I was trying to create a simple slideshow with sound when first my computer warned of low memory (something that doesn't seem plausible), and then Photoshop Elements 9 and the associated organizer crashed. When I brought it back, several photos were "grayed out" and my organizer is completely frozen. The error suggests that there are corrupt files. I tried to follow the instructions on the website, but cannot find any sort of Catalog menu or means of changing anything in the catalog or organizer as indicated in the troubleshooting and restoration instructions. Any use of the organizer is frozen.
What am I missing? Thanks to all for your ideas.

If you start up organizer while holding down the shift key, that should take you to the catalog manager where you can repair and optimize your catalog.

How do i make firefox automatically open a file. "Do this automatically with files like this from now on." does NOT work.

I have firefox set to Open .wav files with VLC and i have the check box marked to "Do this automatically for files like this from now on." But every time i click download for a .wav voicemail from gmail, i get the same dialog box. I just want firefox to hand the downloaded file to VLC and play it. I don't want to have to click anything after i click the download link. Isn't that action what i'm telling firefox to do after i mark the checkbox with "Do this automatically with file like this from now on." ? Isn't that implied with my selection of the box? How can i fix this?i want to click a "download" link for a .wav voice mail in Gmail and have it automatically play in VLC without any further interaction from me.

No it's saving the preferences and the check box remains checked from session to session. It will even continue to ask me to what to do with the file even in the same session when i try to download the same file again 5 seconds after i downloaded it the first time.

How to turn off automatic correction on text message?

How to turn off automatic correction on text message?

At this time I don't think there is a way to turn it off. the software will learn new words and shortcuts you use when typing as you go. To do this type in the word/phrase and then hit the x when the suggested word pops up or tap on the word to keep what you have. Then hit the space bar and type away, it should have added that word to its dictionary and if you type it again it shouldn't offer up a new word instead.

How can I open McAfee encrypted (EEFF) PDF files with Adobe Reader?

How can I open McAfee encrypted (EEFF) PDF files with Adobe Reader? Get error "There was an error opening this document. Access denied". Disabling Protected Mode in Reader doesn’t always work.
McAfee: https://kc.mcafee.com/corporate/index?page=content&id=KB74299&actp=search&viewlocale=en_US &searchid=1240943327683

If Reader ISN'T in the list of prpgrams to open with, click "Browse"
In the "Browse window" go to C/Program files [or Program Files (x86)]/Adobe/Reader 11/Reader
Select "AcroRd32.exe" and click "Open"
Make sure "Always use the selected program to open this kind of file" is checked and click "OK".

HT1414 i was restore my iphone 5 but last time itune show error (-1) so how can i solve this problem?

i was restore my iphone 5 but last time itune show error (-1) so how can i solve this problem?

Error -1 indicates a serious hardware failure.
Try restoring the device again, try on a different computer. If the issue continues, take the device to Apple for evaluation and possible replacement.

How do I Change where iPod_Control\iTunes\ITunesControl files install?

How do I Change where iPod_Control\iTunes\ITunesControl files install? This file has installed itself on a netwrok drive and not where I have my itunes folder? Why and how do I point this control file to the right location?

hiya!
How do I Change where iPod_Control\iTunes\ITunesControl files install?
hmmm. those files should only appear in your ipod itself. if they are showing up on a network drive, it's plausible that you've got a Windows drive letter confusion going on in the background of all this:
Strange iPod behavior when Windows confuses iPod with network drive
keep us posted.
love, b

HT3743 I got an error no 1015 ! what does it mean ? and How Can I solve this issue?

I got an error no 1015 ! what does it mean ? and How Can I solve this issue?

Error 1015: This error is typically caused by attempts to downgrade the iPhone, iPad, or iPod touch's software. This can occur when you attempt to restore using an older .ipsw file. Downgrading to a previous version is not supported. To resolve this issue, attempt to restore with the latest iPhone, iPad, or iPod touch software available from Apple. This error can also occur when an unauthorized modification of the iOS has occurred and you are now trying to restore to an authorized, default state.
Busted...

I can't update IPhoto, it says "the product distribution file could not be verified it must be damaged or signed in" I bought it on iTunes and have 8,000 photos already. how can I update and correct this??

I can't update IPhoto, it says "the product distribution file could not be verified it must be damaged or signed in" I bought it on iTunes and have 8,000 photos already. how can I update and correct this??

You might try resetting the App Store application and clear the cookies via this menu:
as described in this website: Make use of the Mac App Store debug menu | MacFixIt - CNET Reviews
OT

How can I display JTextFields correctly on a JPanel using GridBagLayout?

I had some inputfields on a JPanel using the boxLayout. All was ok. Then I decided to change the panellayout to GridBagLayout. The JLabel fields are displayed correctly but the JTextField aren't. They are at the JPanel but have a size of 0??? So we cannot see what we type in these fields... Even when I put some text in the field before putting it on the panel.
How can I display JTextFields correctly on a JPanel using GridBagLayout?
here is a shortcut of my code:
private Dimension sFieldSize10 = new Dimension(80, 20);
// Create and instantiate Selection Fields
private JLabel lSearchAbrText = new JLabel();
private JTextField searchAbrText = new JTextField();
// Set properties for SelectionFields
lSearchAbrNumber.setText("ABR Number (0-9999999):");
searchAbrNumber.setText("");
searchAbrNumber.createToolTip();
searchAbrNumber.setToolTipText("enter the AbrNumber.");
searchAbrNumber.setPreferredSize(sFieldSize10);
searchAbrNumber.setMaximumSize(sFieldSize10);
public void createViewSubsetPanel() {
pSubset = new JPanel();
// Set layout
pSubset.setLayout(new GridBagLayout());
GridBagConstraints gbc = new GridBagConstraints();
// Add Fields
gbc.gridy = 0;
gbc.gridx = GridBagConstraints.RELATIVE;
pSubset.add(lSearchAbrNumber, gbc);
// also tried inserting this statement
// searchAbrNumber.setText("0000000");
// without success
pSubset.add(searchAbrNumber,gbc);
pSubset.add(lSearchAbrText, gbc);
pSubset.add(searchAbrText, gbc);
gbc.gridy = 1;
pSubset.add(lSearchClassCode, gbc);
pSubset.add(searchClassCode, gbc);
pSubset.add(butSearch, gbc);
}

import java.awt.*;
import java.awt.event.*;
import javax .swing.*;
public class GridBagDemo {
public static void main(String[] args) {
    JLabel
      labelOne   = new JLabel("Label One"),
      labelTwo   = new JLabel("Label Two"),
      labelThree = new JLabel("Label Three"),
      labelFour = new JLabel("Label Four");
    JLabel[] labels = {
      labelOne, labelTwo, labelThree, labelFour
    JTextField
      tfOne   = new JTextField(),
      tfTwo   = new JTextField(),
      tfThree = new JTextField(),
      tfFour = new JTextField();
    JTextField[] fields = {
      tfOne, tfTwo, tfThree, tfFour
    Dimension
      labelSize = new Dimension(125,20),
      fieldSize = new Dimension(150,20);
    for(int i = 0; i < labels.length; i++) {
      labels.setPreferredSize(labelSize);
labels[i].setHorizontalAlignment(JLabel.RIGHT);
fields[i].setPreferredSize(fieldSize);
GridBagLayout gridbag = new GridBagLayout();
JPanel panel = new JPanel(gridbag);
GridBagConstraints gbc = new GridBagConstraints();
gbc.weightx = 1.0;
gbc.weighty = 1.0;
gbc.insets = new Insets(5,5,5,5);
panel.add(labelOne, gbc);
panel.add(tfOne, gbc);
gbc.gridwidth = gbc.RELATIVE;
panel.add(labelTwo, gbc);
gbc.gridwidth = gbc.REMAINDER;
panel.add(tfTwo, gbc);
gbc.gridwidth = 1;
panel.add(labelThree, gbc);
panel.add(tfThree, gbc);
gbc.gridwidth = gbc.RELATIVE;
panel.add(labelFour, gbc);
gbc.gridwidth = gbc.REMAINDER;
panel.add(tfFour, gbc);
final JButton
smallerButton = new JButton("smaller"),
biggerButton = new JButton("wider");
final JFrame f = new JFrame();
ActionListener l = new ActionListener() {
final int DELTA_X = 25;
int oldWidth, newWidth;
public void actionPerformed(ActionEvent e) {
JButton button = (JButton)e.getSource();
oldWidth = f.getSize().width;
if(button == smallerButton)
newWidth = oldWidth - DELTA_X;
if(button == biggerButton)
newWidth = oldWidth + DELTA_X;
f.setSize(new Dimension(newWidth, f.getSize().height));
f.validate();
smallerButton.addActionListener(l);
biggerButton.addActionListener(l);
JPanel southPanel = new JPanel(gridbag);
gbc.gridwidth = gbc.RELATIVE;
southPanel.add(smallerButton, gbc);
gbc.gridwidth = gbc.REMAINDER;
southPanel.add(biggerButton, gbc);
f.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
f.getContentPane().add(panel);
f.getContentPane().add(southPanel, "South");
f.pack();
f.setLocation(200,200);
f.setVisible(true);

How am I meant to correct my Framemaker files to solve this Acrobat Distiller error?

Similar Messages

Maybe you are looking for