How call a program wihout screen with a transaction ?

Hi every body
I created a very small program wich saves in memory some value and call another existing transaction.
I need to create a new transaction for call this program, but when i create the transaction this ask me for a screen number for the program, but a don't have any screen, my program is only for save the memory value and call another tcode. I created the program with type 1 Executable.
Wich type must i create the transaction for this program so this tcode does not ask for any screen ?
Thanks
Frank

Hi frank,
1. While creating tcode thru se93,
   choose the radio button (2nd radio button)
   "Program and selection screen (report transaction)"
2. A new screen will come,
   in which 1000 will be the defalt screen number
   (which is perfectly ok)
3. Just give your program name, text.
4. Tick all the check boxes.
5. Thats all !
regards,
amit m.

Similar Messages

  • When i m in a call i touch the screen with my cheek and i keep on putting calls on hols or speaker..how do i solve this?if i don t want a headset?when i m in a call i touch the screen with my cheek and i keep on putting calls on hols or speaker..how do i

    when i m in a call i touch the screen with my cheek and i keep on putting calls on hols or speaker..how do i solve this?if i don t want a headset?

    SORRY, the picture is just to illustrate and to better show the area where the time display is located, same place in the iPhone 3gs, to my knowledge, the location is the same, due to the OS on both phones.
    Second, run the test to see if it works:
    1st test: go to phone mode, select dial key pad, put the tip of your thumb in top of the time display ( the screen will not go black), try to dial.
    2nd test: place a call, after starts ringing switch the display to dial pad, put the tip of your thumb on top of the time display, the screen will not go black, try to dial.
    THE SCREEN WILL ONLY GO BLACK ( INACTIVE) IF YOU TOUCH A LARGER AREA TO THE TOP OF THE DISPLAY, IF THE THUMB ONLY TOUCHES THE TIME DISPLAY AND A LITTLE PART OF THE AREA WHERE THE NUMBERS APPEAR THE DIAL PAD DID NOT WORK EVEN WITH THE DISPLAY NOT GOING BLACK (INACTIVE).
    I am also trying in my wife's iPhone 4 as I right this post and both phones behave the same way.
    I found out what I stated above after running tests to see if the case was affecting the phones performance.
    Due to the thickness of the case on the sensor area, it really did affect the way the sensor was supposed to work, after I cut that part on the case, the sensor started to work perfectly and the screen turns off during a call like it is supposed to do.
    So before someone go nuts thinking that the phone is not working and that they have to take it to repair, try seeing if the case is not interfering with the phones performance.

  • How do I find the screen with my personal iPod (my name's iPod) so I can download from my purchased or free songs/pods from my computer? My iPod has opened to that for 3 years and this week I can't find it: not on purchased page or on Apple store page.

    QUESTION from an American in India:
    How do I find the screen with my personal iPod (my name's iPod) so I can download from my purchased or free songs/pods from my computer? My iPod has opened to that for 3 years and this week I can't find it: not on purchased page or on Apple store page.

    See:
    Recovering your iTunes library from your iPod or iOS device: Apple Support Communities

  • How to create  a test plan with specific transactions (or program)

    Hello,
    I'm a new user in Sol Man !
    How to create  a test plan with specific transactions (or program).
    In my Business Blueprint (SOLAR01) I've created in 'transaction tab' the name of my specific transactions and linked it.
    In my test plan (STWB_2) those specific doesn't appear to be selected !
    Thanks in advance.
    Georges HUYNEN

    Hi 
    In solar01 you have defined but you have to assign the test case in solar02 for this test case in the test cases tab.
    When you do so expand the business sceanario node in test plan generation of STWB_2 transaction and now that will appear.
    Also visit my weblog
    /people/community.user/blog/2006/12/07/organize-and-perform-testing-using-solution-manager
    please reward points.

  • Connected to tv.how do you fill the screen with the ipad

    Have connected to tv all ok but how do you fill the screen with the mirror image from the ipad

    Yes I have the iPad cable bought from apple

  • How to display the selection screen with icons as well as with text element

    How to display the selection screen with icons as well as with texts (written in text elements) for PlantDate, OrderType,WareHouse..

    Report zex33.
    type-pools: icon.
    selection-screen begin of line.
    selection-screen comment 1(20) text_001.
    parameters: p_werks type marc-werks.
    selection-screen end of line.
    selection-screen begin of line.
    selection-screen comment 1(20) text_002.
    parameters: p_whouse(10).
    selection-screen end of line.
    selection-screen begin of line.
    selection-screen comment 1(20) text_003.
    parameters: p_auart like vbak-auart.
    selection-screen end of line.
    initialization.
      write ICON_PLANT  as icon to text_001.
    concatenate text_001 text-001 into text_001 separated by space.
      write ICON_WAREHOUSE  as icon to text_002.
    concatenate text_002 text-002 into text_002 separated by space.
      write ICON_ORDER  as icon to text_003.
    concatenate text_003 text-003 into text_003 separated by space.

  • Content from my Apple TV only displays on about 50% of the screen on my 40" 1080p flatcreen.  How do I fill the screen with content?

    Content from Apple TV 2 only displays in about 50% of the screen on my 40" 1080p flatscreen.  How do I fill the screen with content?

    Check  TV remote for an aspect ratio control (occssionally zoom) and set to 16:9.

  • HT4085 how to lock the tauch screen with some password or dots like android to prevent misuse. And also screen lock to prevent interruption while watching movie reading books etc.

    how to lock the tauch screen with some password or dots like android to prevent misuse. And also screen lock to prevent interruption while watching movie reading books etc.

    You can set a passcode to be requied to unlock the iPad via Settings > General > Passcode Lock. In terms of locking the actual screen whilst using an app, then that isn't currently possible, but with iOS 6 in the Autumn there will be a new 'accessibility' feature (from here) which will allow you :
    ... to limit an iOS device to one app by disabling the Home button, as well as restrict touch input on certain areas of the screen

  • How Can I Take Print Screen With in java Application

    Hello Every One,
    Hope U all r fine.
    How can i take print screen with in java code,
    Please Help me out

    http://search.java.sun.com/search/java/index.jsp?qp=&nh=10&qt=%2Btitle%3A%22print+screen%22&col=javaforums

  • How can I share my screen with another apple computer?

    How can I share my screen with another apple computer?

    By enabling Screen Sharing in the Sharing preferences. Both computers need to be connected to your local network, preferably by Ethernet.

  • How to use a Submit Sentence with a transaction tha has 2 screens?

    Hi all,
    I want to use the SUBMIT sentence to call the WRP1 transaction, but how can I control the second screen after the SUBMIT to the 1000 screen??.
    This because the first screen of this transaction is returning me to the second one, and I need to hit the execute button at the second screen. 
    thks all!!!

    That won't work using SUBMIT...You will be able to at most SKIP FIRST SCREEN but cannot execute button on second screen.
    Here is work around
    Create a small Z program which will have BDC recoridng for WRP1 first screen and record Execute action on second screen..Submit your Z program from your current program
    Regards,
    Mohaiyuddin

  • How would I create a screen with links after a person logs into their computer?

    I have been asked to create a custom welcome screen that would load after a person logs into their computer . This screen is to have links to a couple of items.
    but I need this to show after they log in and before they see their desktop.
    How do I do this or even accomplish this? 

    According to your description, it really seems like a start screen in Windows 8\8.1, after user logs on to the system, he will first see a "start screen" with tiles (links to an App) on the screen, then he can manually swith to the classic desktop if he
    want.
    But in Windows 7, I never saw this kind of settings, for VB6 and HTA page, seems more related with development, if so, I suggest you post in this forum
    Scripting Forum
    http://social.technet.microsoft.com/Forums/scriptcenter/en-US/home?category=scripting
    and VB Forumhttp://social.msdn.microsoft.com/Forums/en-US/home?forum=vbgeneral
    Regarding to a trigger when a user logs on, you can refer to the following link
    http://www.grouppolicy.biz/2010/01/how-to-schedule-a-delayed-start-logon-script-with-group-policy/
    or
    http://technet.microsoft.com/en-us/library/cc758918(v=ws.10).aspx
    NOTE
    This
    response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you.
    Microsoft
    does not control these sites and has not tested any software or information found on these sites.
    Yolanda Zhu
    TechNet Community Support

  • How could I recorder my screen with Quick k time 7 pro with  OS X 10.8

    How could recorder Mac Screen with quick time 7 pro?

    QuickTime 7 does not exist in Mountain Lion. Not sure if you could even install it from the stand-alone installer. I can't look at the moment, but I believe QuickTime X in ML will do a screen capture.
    Just to note: If you had Quicktime Pro 7 installed when upgrading to either Lion or Mountain Lion, it was relocated to the Utilities folder. It can also be downloaded and installed in Mountain Lion, and it does function.
    It will also do screen recordings, but as others have pointed out Quicktime Player 10 will do it too.

  • How to share my iPad screen with someone else who is not on my network?

    I'd like to share my iPad screen with someone else who has an iPad and is connected to the internet, but not on my WiFi. Is this possible? Any apps that do this?

    Sorry, you can't do that unless they are on your LAN.  I don't know of any apps that will let you do it.

  • How to display the variable screen with report in the same page together

    our customers want to design a web application use BEx
    they want the variable screen can be displayed with the report result in the same web page together
    so they can modify the variable filters any time and refresh the report with new variable filter
    i have tried the navigation area,but it seems only use new filter to the data athough get,we can't change the filter we input in the variable screen.
    is there any way to display these together?
    even I can use BSP.

    I think to display var screen with the report is not possible.(At least it will not be static). You need to refresh the report and choose the varibale at that time.
    Other option could be to bring all the possible value in the report and provide your user with the filter value. But this will make your report slow as you may have to bring more data in the filter.
    Thanks...
    Shambhu

Maybe you are looking for

  • Vista beta 2 driv

    ok, I'm not that techy minded but I have installed windows beta 2 and my x-fi sound card doesnt work. Is there anything I can do to get it working or do I need to uninstall vista? Any help is appreciated

  • Can I highlight items in the open sites listing

    in the open sites listing on the left side, is there any way I can differentiate by highlighting items. Case in point, I have to search through the entire listing to locate my open gmail, if it was obvious, I could find it faster. Also, if a webinar

  • Use of & in search within a function

    I need to write a function that strips out information from a text string. The end of the text I am interested in is marked with &. As with other cases it keeps prompting for a value, which is not acceptable as this will be run from an application. I

  • Is It Safe To Keep Charging An iPhone 6 and/or An iPhone 6 Plus Even After It Reaches 100%?

    Hi there! I wanted to know whether it is safe to keep both the iPhone 6 and iPhone 6 Plus charged even if it has already reached 100%. I am aware that it is safe to keep a MacBook Pro charged even if the battery has already been charged to 100%. I wa

  • Using a mask in speedgrade

    I have been having trouble using the mask option in speedgrade, any advice you can give will be helpful. I follow the tutorials to the T but get nowhere. I am able to make adjustments to the clip that affect the entire clip, but when using the mask f