How can I access the values in ProfileArray of a CWIMAQProfileReport?

Hi all,
I'm not sure if this is the right board, but I didn't find one related to VB and NI Vision.
I'm using LineProfile2 from CWIMAQVision1 which gives me a ProfileArray which is a variant. I'd like to access the
values in the array. Normally I would do it like
Report(1).ProfileArray(i)
but that does not work. I can get the bounds of the array with LBound and UBound. I can observe the array in 
debug modus and it contains reasonable values.
How can I get access to the contents of the ProfileArray?
Thanks in advance
Axel

Hi Elmar,
thanks for paying attention to my problems.
I use Vision 8.5. My email adress is [email protected]
I don't need the hole intensity of the image/2D array. I only need the
intensity values of a given line which should be a 1D array of bytes.
I use the following command
        CWIMAQVision1.LineProfile2 Image, Line, Report
When I understood the command correctly the intensity values are
in the Report. I would get them with 
        Report(1).ProfileArray(i)
But that does not work. I get a runtime error #450.
Other stuff with the report works and gives reasonable values e.g.
            Report(1).PixelCount
            LBound(Report(1).ProfileArray)
            UBound(Report(1).ProfileArray)
Or passing the hole array to plot the values also works
        frmLineProfile.CWGraph1.PlotY Report(1).ProfileArray
Best regards,
Axel

Similar Messages

  • How can we access the value set to a search criteria's attribute

    Hi guys,
    Is there any way to access the value which was set to a search criteria's attribute programmatically in the backing bean?
    Regards !
    Sameera

    Check sample 85 from the adf code corner sampleshttp://www.oracle.com/technetwork/developer-tools/adf/learnmore/85-querycomponent-fieldvalidation-427197.pdf
    Frank shows how to access the variables.
    Timo

  • How can I access the value of a loop index outside the loop?

    I have a sequence structure in Labview 8.6.  At one frame of the sequence I have a while loop.  The loop runs for a while and then stops and the program then moves to the next frame of the sequence.  Several frames further on down the sequence I have a cluster, the elements of which are outputs on the front panel.  The index of the mentioned loop is one of the cluster elements, an numeric output.  While the loop is running, I want the index to be displayed on the front panel in the output contained in the cluster.  How can I do this?

    The easiest way to do this is to use a local variable of your cluster.  You'll need one copy set to read; connect that to a bundle by name, bundle in your index value from the loop, and wire the bundle output to a write copy of your local variable.  You can create a local variable by right-clicking on the cluster terminal (in the block diagram) and choosing create local variable.  You can change the local variable to read or write by right-clicking on it.
    However, in general the use of both local variables and sequence structures is discouraged, and the right solution may be to rewrite your code with a while loop containing a case structure in which you update the cluster every time through the loop.  This will look like a state machine; you'll also need a shift register in place of the loop iteration counter.  If you post your code (ideally the VI, but if not then a screenshot of the block diagram) then we can provide more useful assistance.

  • How can I access the Attribute Values from the Search Region

    Hi all,
    I have a table which contains Company id, department id, and PositonId. For a particular Company and Department there may be multiple records.
    I have to pupulate a table which contains the position and other details that comes under a particular Department and Position based on the selection in the Three comboBoxes.
    Also I have to populate a select many Shuttle to add new postions and records under a particular Department.
    I created a query panel *(Search Region)* for the serch and a table to display the data. That is working fine.
    Now the issue is I am using a view criteria to populate the shuttle with two bind variables ie, DepartmentId and CompanyId.
    If the serach will return a resuktant set in the table it will also pupulate the correct records, otherwise ie, if the if the serch result is empty the corresponding iterator and the attribute is setting as null.
    SO I want to access the attribute values from the Search Region itsef to populate the shuttle.
    I don't know how can I access the data from the Search Region.
    Please Help.
    Regards,
    Ranjith

    you could access the parameters entered in search region by the user as follows:
    You can get handle to the value entered by the user using queryListener method in af:query.
    You can intercept the values entered as described
    public void onQueryList(QueryEvent queryEvent) {
    // The generated QueryListener replaced by this method
    //#{bindings.ImplicitViewCriteriaQuery.processQuery}
    QueryDescriptor qdes = queryEvent.getDescriptor();
    //get the name of the QueryCriteria
    System.out.println("NAME "+qdes.getName());
    List<Criterion> searchList = qdes.getConjunctionCriterion().getCriterionList();
    for ( Criterion c : searchList) {
    if (c instanceof AttributeCriterion ) {
    AttributeCriterion a = (AttributeCriterion) c;
    a.getValues();
    for ( Object o : a.getValues()){
    System.out.println(o.toString());
    //call default Query Event
    invokeQueryEventMethodExpression("#{bindings.ImplicitViewCriteriaQuery.processQuery}",queryEvent);
    public void onQueryTable(QueryEvent queryEvent) {
    // The generated QueryListener replaced by this method
    //#{bindings.ImplicitViewCriteriaQuery.processQuery}
    QueryDescriptor qdes = queryEvent.getDescriptor();
    //get the name of the QueryCriteria
    System.out.println("NAME "+qdes.getName());
    invokeQueryEventMethodExpression("#{bindings.ImplicitViewCriteriaQuery.processQuery}",queryEvent);
    private void invokeQueryEventMethodExpression(String expression, QueryEvent queryEvent){
    FacesContext fctx = FacesContext.getCurrentInstance();
    ELContext elctx = fctx.getELContext();
    ExpressionFactory efactory = fctx.getApplication().getExpressionFactory();
    MethodExpression me = efactory.createMethodExpression(elctx,expression, Object.class, new Class[]{QueryEvent.class});
    me.invoke(elctx, new Object[]{queryEvent});
    Thanks,
    Navaneeth

  • How can i pass the value one from to another form?

    hi all
    how can i pass the value one from to another form  with out use it when ever i want to needed this value that ican useit?
    like i have two fields U_test1 and U_test2  table name @AUSR
    that i have  four form  A! , A2,A3,A4    please tell me in details....?

    Hi,
    U can assign the values to some variables and access then in ur required forms.
    Vasu Natari.

  • How can I receive the value of a selected item in the backing bean

    I have a table in a jspx file.
    When I go to the detail page I want to do something with the value of the currentrow.
    I want do a calculaction of the value of ClbId.
    How can I receive the value of the selected ClbId in my backing bean
    <af:table value="#{bindings.Searchteamlist.collectionModel}"
    var="row" rows="#{bindings.Searchteamlist.rangeSize}"
    first="#{bindings.Searchteamlist.rangeStart}"
    emptyText="#{bindings.Searchteamlist.viewable ? 'No rows yet.' : 'Access Denied.'}"
    selectionState="#{bindings.Searchteamlist.collectionModel.selectedRow}"
    selectionListener="#{bindings.Searchteamlist.collectionModel.makeCurrent}"
    rendered="#{backing_FirstFlag_Club_Club.searchFirstTimeClub_Club_AdresAndereClubs == false}">
    <af:column sortProperty="Matricule" sortable="true"
    headerText="#{bindings.Searchteamlist.labels.Matricule}">
    <af:outputText value="#{row.Matricule}"/>
    </af:column>
    <af:column sortProperty="ClbId" sortable="true"
    headerText="#{bindings.Searchteamlist.labels.ClbId}">
    <af:outputText value="#{row.ClbId}">
    <f:convertNumber groupingUsed="false"
    pattern="#{bindings.Searchteamlist.formats.ClbId}"/>
    </af:outputText>
    </af:column>
    <af:column sortProperty="Nom" sortable="true"
    headerText="#{bindings.Searchteamlist.labels.Nom}">
    <af:outputText value="#{row.Nom}"/>
    </af:column>
    <f:facet name="selection">
    <af:tableSelectOne text="Select and">
    <af:commandButton text="Submit"
    action="club_AdresAndereClubsDetail">
    <af:setActionListener from="#{row}"
    to="#{processScope.row}"/>
    </af:commandButton>
    </af:tableSelectOne>
    </f:facet>
    </af:table>

    hi tde
    Using an Expression Language helper class like this one from Steve Muench ...
    http://radio.weblogs.com/0118231/stories/2006/12/18/sourceForMyFavoriteElHelperClass.html
    ... you could write something like this in your backing bean:
    Integer vClbId = (Integer)EL.get("#{row.ClbId}");(Make sure to cast it to the correct type.)
    success
    Jan Vervecken

  • How can I access the properties of Microsoft files (excel, ppt, and word)

    Hi,
    How can I access the properties of common Microsoft file formats (Excel, Word, and Powerpoint) from a Java program. You can access/modify the properties of each document type using File->Properties in each MS application. The properties are essentially name/value pairs.
    Basically, I need to write a java program that scans a directory and accesses the properties in each of the MS files in the directory.
    thanks,
    -john

    By api. That is only way to establish a contract with the MS programs you want to interface with, unless you write an api yourself! I've used POI and it was an awesome way to use Excel in java. I created an excel spreadsheet from the results of a sql query from a batch program and then it was automatically emailed using javamail to my client. I had a lot of VBA experience with Excel, Word, and Outlook and it didn't take me long to get used to using Jakarta-POI.
    Now I see there is Jakarta-POI-HWPF which works with MS Word documents. Go to: http://jakarta.apache.org/poi/

  • How can I access the selected element of a DropDownByIndex-box?

    Hi,
    I want to create a WebDynpro with two web services. I created the first request with the first web service and the results are displayed in a DropDownByIndex-Box. Now the user should choose one of the results and I would like to use this for the request with my second web service. How can I access the selected Element of a DropDownByIndexBox in the Code?
    Thank you!!
    Julia

    Hi Julia,
    when user select one element in drop down it automatically set lead selection of node binded to dropdown.
    For example if you bind a dropdown to node myNode with value attribute myAttribute the lead selection of node myNode is set in the position of element choose from user.
    So to take this chooised element use this code:
    wdContext.currentMyNodeElement.getmyAttribute()
    bye
    Andrea

  • How can I get the value of "Warehose" column in a form

    How can I get the value of "Warehouse" column in the form below (I mean what table that contain this value):
    Production Supervisor >> Batches >> (Button) Material Details >> (Button) Line Allocations
    Well, for more clearly! My problem is I must have the Unit Cost of Items, so I've got it in the cm_cmpt_dtl (table), but if I want to, I must create a relation that require 2 filed, they're Item_ID and Whse_Code.
    There's no problem with Item_ID, but Whse_Code seem to be the Mission Impossible (hix, I hate that film!!!!)
    I wonder if It was right to post this topic here. But anyway I just post my question here, hope I could get some help.

    wow, many, many, many.... and many thanks!
    Just add a tiny modify to check out the Batch_type
    doc_id = (select batch_id from gme_batch_header where batch_no='&batch_number' and batch_type = 0)
    Because the batch_no can be duplicated as we also create Batch and Filrm Planned Order.
    Many thanks for your support!
    P/S: Sorry for my terrible English :P

  • I have just acquired an iMac desktop. I want to sign on to my airport wireless network, but cannot remember the password. How can I access the password or reset it. I already use a MacBook Pro and an iPad on the network.

    I have just acquired an iMac desktop (about 4 years old). I want to connect to my Apple airport wireless network, but cannot remember the password. How can I access the password or, if necessary, reset it. I already use a MacBook Pro and an iPad on the network and don't want to jeopardize what already works well. I am not all that computer literate.

    How can I access the password or, if necessary, reset it.
    Read the user manual that came w/your Airport router or you can cross-post in one of the  AirPort Forums for instructions. 

  • On imac 10.6.8 using current version of Aperture.  How can I access the Aperture Library  on my external hard drive that I use with time machine for backup?  I can only access the application but not the library..

    On imac 10.6.8 using current version of Aperture.  How can I access the Aperture Library  on my external hard drive that I use with time machine for backup?  I can only access the application but not the library..

    Go into Time Machine (the program not the bundle on the extrnal disk) and using Time Machine's browser go to the Folder where the library lives. You could look in the library bundle in Time Machine but that won't really tell you much,
    If you want to make sure it truely has backed up your library you will need to restore it and open the restored library with Aperture.
    If all this still has you confused you need to read up on Time Machine in order to get a feel for how it works, for what it is doing and for how to restore files from it.

  • I have converted a pdf to word. How can I access the Word file from my online account?

    I have converted a pdf to word. How can I access the Word file from my online account? When it says 'download the converted file' I choose a location on my PC and click, but nothing happens. It seems that it can only save the converted file to my online account. I went to my online account but I see no way to look for the file

    Hey Fabrizio,
    You might need to sign up at "https://cloud.acrobat.com/exportpdf" using your Adobe ID credentials to convert your PDF file to Word.
    Do you get the 'download' prompt?
    Also, you can find the converted files by clicking at the 'Files' tab. 
    Please try the same using a different browser and check.
    Hope to hear from you.
    Regards,
    Anubha

  • How can I pass the value to another frame?

    Hi all,
    The following is part of my coding of a frame. Once i click on the jButton2, the selected value will be stored into a variable named NAME and the value will be displayed by a label in same frame. At the same time, a new frame named TESTING3 will be set to visible.
    private void jButton2ActionPerformed(java.awt.event.ActionEvent evt)
    // TODO add your handling code here:
        String name = (String)jList1.getSelectedValue();
        jLabel1.setText(name);       //display the value in a label in same frame
        new testing3().setVisible(true);     //a new frame set to visible
    }      Question: How can I pass the value to TESTING3 frame and display it on that frame?
    Thanks,
    ning.

    just make an archive that save that variable and them get them from de clase were you save it
    public class sav {
    String n;
    public sav {
    n="";
    public void addn(String x){
    n=x;
    public String shown(){
    return n;
    and them save it from the frame
    sav sun = new sav();
    sav.addn(f);
    them call it from the other frame
    sav sin = new sav();
    String s = sin.shown();
    label.setText(s);
    and i think thats you want to do if its not please explain me better
    bye

  • How can I sum the values in a given column on sheet 1 i.e. A1:A50 based on the adjacent columns specific value i.e. B1:B50 = "Living Room" on sheet 2

    How can I sum the values in a given column on sheet 1 i.e. A1:A50 based on the adjacent columns specific value i.e. B1:B50 = “Dinning Room” on sheet 2
    For Example:
    SHEET 1
    A
    B
    $50
    Dinning Room
    $800
    Dinning Room
    $300
    Kitchen
    $1,000
    Master Bedroom
    $100
    Dinning Room
    SHEET 2
    Display the total SUM amount of each Project based on Sheet 1
    Project Name
    Total Cost
    Dinning Room
    $950
    Kitchen
    $300

    Would be a good idea to open iWork Formulas and Functions User Guide and search for the description of the function named SUMIF
    The Guide is available for every user thru the Help menu.
    Yvan KOENIG (VALLAURIS, France) jeudi 19 mai 2011 17:32:42
    Please :
    Search for questions similar to your own before submitting them to the community
    To be the AW6 successor, iWork MUST integrate a TRUE DB, not a list organizer !

  • How can i access the EJB from a Webdynpro

    Dear all,
    How can i access the ejb , from a webdynpro?.
    Is there any way to do that?.
    I want to write the entire code (business functions) within the EJB and i wan to access the entire methods from a WebDynpro Application.This is the situation.
    Please help me to , resolve this problem.(Here im using JDBC Connection .. etc.).
    I want to do the basic connection setting's and data retrieval part within the EJB and use that within the WebDynpro..
    how can i seperate this two(i mean, i want to seperate the JDBC connections and WebDynpro,i dont want to hard code any connection parameters within the webdynpro code)
    So that i want use that saet of particular function's in many webdynpro applications..
    (i dont need any help regarding webservice way.)
    If anyone can , please help me..
    I tried that javabean class , manifest file , that way (importing javabean model).
    but im getting errors.
    I cant properly utilize that..
    So please help me with steps regarding that,,
    for javabean
    and if any , for EJB also..
    with regards
    Kishor.G

    HI,
    Since webdynpros follows Model View Controller Architecture You can access EJBs in webdynpro(views/frontend) infact to connec to database uding JDBC you have to utilise EJB ( opening connection to database closing, and other Business functionality).See this link
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/unkown/web dynpro tutorial and sample applications.faq#q-7
    <b>How to access the Car Rental Web Service?</b>
    Regards,
    RK

Maybe you are looking for