How can I add customer partner function entries in LSMW?

I am using SAP ECC 6.0 with best practices installed. I am able to create sold-to customers using the batch input program RFBIDE00.
When I try to add partner function entries using structure BKNVP, it appears that the partner ID stored in KTONR is not populating SAPMF02D screen 324 after it is entered on screen 2324. I receive a Data is incomplete; check error. I could not find an SAP note or other solution to correct this problem.
While searching for a solution, I found a few recommendations to use the IDOC message DEBMAS to create the partners function entries instead of batch input. When I try to use this approach, I am receiving an error Deletion is not allowed: SP is mandatory function. I was trying to add an SH (WE Ship-To) at the time. I found a reference that explained that all partners were replaced when this IDOC message is used. It further explained that this should work if all partner references were included in the message. This approach did not work either. I still receive this error if I omit or include an SP (AG Sold-To) record.
Does anyone have a solution to either problem or another approach?

Hi
You can use LSMW :-
1) Create a project , sub project and an object.
2) execute it from 1 st screen to enter the object.
3) You will find proces steps.
4) In Maintain Object Attributes choose Program Name RFBIDE00.
or I-DOC or the way you want the input to be.
5) You can proceed from there following the instruction..

Similar Messages

Need a user exit to add custom partner function in sales order @ item level

Hi,
Need a user exit to add custom partner function in sales order at item level. Goto --> Item --> Partner.
Thanks,
Thiyagi

HI Leo
To add a condition price for a condition type, this has to be assigned in the pricing procedure. For each condition type in a pricing procedure, we will have access sequences. If we follow this approch, the price is automatically extracted basing on the access sequences when condition records are maintained. For this, no coding is required and everything can be done by configuration by Functional consultant.
Naren is right to point out on the same.
If you need to change the price for a particular condition which already exists, you can go by pricing routines. Go through transaction VOFM for the same.
I advice you to discuss with your functional consultant and understand the requirement and then go for modifying accordingly.
Kind Regards
Eswar

How can i add custom attributes to a new Class Object using the API ?

Hello everyone,
Here is my problem. I just created a subclass of Document using the API (not XML), by creating a ClassObjectDefinition and a ClassObject. Here is the code :
// doc is an instance of Document
ClassObject co = doc.getClassObject();
ClassObjectDefinition cod = new ClassObjectDefinition(ifsSession);
cod.setSuperclass(co);
cod.setSuperclassName(co.getName());
cod.setName("MYDocument");
ClassObject c = (ClassObject)ifsSession.createSchemaObject(cod);
Everything seems to be OK since i can see the new class when i use ifsmgr. But my question is : how can i add custom attributes to this new class ? Here is what i tried :
AttributeDefinition value = new AttributeDefinition(ifsSession);
value.setAttribute("FOO", AttributeValue.newAttributeValue("bar"));
c.addAttribute(value);
But i got the following error message :
oracle.ifs.common.IfsException: IFS-30002: Unable to create new LibraryObject
java.sql.SQLException: ORA-01400: impossible d'insirer NULL dans ("IFSSYS"."ODM_ATTRIBUTE"."DATATYPE")
oracle.ifs.server.S_LibraryObjectData oracle.ifs.beans.LibrarySession.DMNewSchemaObject(oracle.ifs.server.S_LibraryObjectDefinition)
oracle.ifs.beans.SchemaObject oracle.ifs.beans.LibrarySession.NewSchemaObject(oracle.ifs.beans.SchemaObjectDefinition)
oracle.ifs.beans.SchemaObject oracle.ifs.beans.LibrarySession.createSchemaObject(oracle.ifs.beans.SchemaObjectDefinition)
void fr.sword.ifs.GestionDocument.IFSDocument.createDocument(java.lang.String)
void fr.sword.ifs.GestionDocument.IFSDocument.main(java.lang.String[])
So, what am i doing wrong ?
More generally, are we restricted in the types of the attributes ? (for example, would it be possible to add an attribute that would be an inputStream ? Or an object that i have already created ?).
Any help would be appreciated. Thanks in advance.
Guillaume
PS : i'm using Oracle iFS 1.1.9 on NT4 SP6 and Oracle 8.1.7
null

Hi Guillaume,
you're welcome. Don't know exactly, but assume that ATTRIBUTEDATATYPE_UNKNOWN
is used to check for erronous cases only
and it shouldn't be used otherwise.
Creating your own objects could be simply done via
ClassObject ifsClassObject;
DocumentDefinition ifsDocDef = new DocumentDefinition(ifsSession);
// get class object for my very own document
ifsClassObject = ClassObject.getClassObjectFromLabel(ifsSession, "MYDOCUMENT");
// set the class for the document i'd like to create
ifsDocDef.setClassObject(ifsClassObject);
// set attributes and content for the document...
ifsDocDef.setAttribute("MYFOO_ATTRIBUTE",....);
ifsDocDef.setContent("This is the content of my document");
// create the document...
PublicObject doc = ifsSession.createPublicObject(ifsDocDef);
null

How can i add Custom fields into the

Dear Experts
We have Ecc6.0 system,
How can i add Custom fields into the Infotype Screen(PA30),i heard that we do it by PM01 Tcode.
But in PM01 i am unable to find the enhance infotype tab.
How can i do it ....pls help.....
Regards
Sajid

Hi,
Do it thru the third tab : Single Screen.
There write down the infotype number (e.g. 0022) and say generate objects.
Regards,
Dilek

How can i add a new function to the Basic IVI class vi's?

I need to use the IVI vi's to control some instruments, let's say a DC Power Supply.
Since there's a DC Power supplyclass, i can used those VI's but waht if one of the VI's does not contains all the functions that i need?. How can i add more functions to the IVI classes?. What do i need to do to add a new function to the iviFGen class?

If you would like to try developing your own instrument driver (or modify the existing one), we have documentation, model instrument drivers, and driver templates to help at :
http://www.ni.com/devzone/idnet/development.htm
We also have a syndicate of third party vendors that specialize in National Instruments' products and services. Some of the vendors specialize in driver development. I would suggest contacting one of the Alliance members at:
http://www.ni.com/alliance

How can I add customer's information?

I can add user to the wlcs_user table with jsp now .
<um:createuser.............>
But
1. How can I add user to customer with jsp?
2. How can I add user's information eg:cardid,e_mail,address etc) with jsp?
which table these information will put into ?
Thank in advance.

I can add user to the wlcs_user table with jsp now .
<um:createuser.............>
But
1. How can I add user to customer with jsp?For WLCS 2.0.1, look at the example code that came with the MyBuyBeans demo in
<wlcs-install-dir>/src/examples/buybeans/client
In particular, look at UserInformation, which is used to collect information
for your Customer and look at RegistrationHelper, which has a
register(userInformation) method that is used to create a new Customer.
For WLCS 3.1 the Customer extends User, so that the Unified User Profile (see
the documentation) can be used to easily integrate customers with WLPS users.
2. How can I add user's information eg:cardid,e_mail,address etc) with jsp?
which table these information will put into ?Look at _userreg.jsp. These are properties that have not been registered with
the "exampleportal" property set using the administration tool, so you cannot
set them with the administration tool. You must use JSP tags or the API to set
them.
Ture Hoefner
BEA Systems, Inc.
2590 Pearl St.
Suite 110
Boulder, CO 80302
www.bea.com

How can i add waveform datasaving functions to 2 channels oscilloscope demo

How can I add waveform datasaving options to my .vi for example Oscar Gomez Fuentes 2channel oscilloscope demo, So that i can later on read the data and print graph.
Mikko

Look at the example Export Waveforms to Spreadsheet File Example.vi that ships with LabView 6 or 7. For your purposes, look at the first two file operations, Write Waveforms to File.vi and Read Waveform from File.vi. You can wire the output of Read Waveform from File.vi directly to a waveform graph. For your application, you don't actually need to call Export Waveforms to Spreadsheet File.vi (unless you're planning on using Excel to manipulate the data).

How can i add custom document properties in Content Services?

Hello guys.
I have question. I need to add custom attributes of document uploaded in CS.
I know about categories, and it will help me.
But i need it on the properties page? in main tab, where docname, creationdate, etc. appears. Is it possible?
Ideally it should appears in main window of CS, without any additional clicks.
Is there any way organize it without development new Web Services?
Thank you.

One possible way of doing this would be to use the $A mapping in the send_access mapping table. see http://docs.iplanet.com/docs/manuals/messaging/ims52/ag/filter.htm#15965
This will depend on what value you wish to use in the header and when and where during the message routing you want to add the header.
You can use channel level filters on the send_access or orig_send_access mapping table to control at which point the header is added but without knowing more about what you wish to do and which conditions you wish to use to add the header it is difficult to say more. It is possible to use a "customer supplied routine (in the form of a shared object call) from the mapping process, but during the mapping process the only information available to the routine is the sender and recipient info so that probably isnt suitable for your purposes.
Another method of header manipulation in IMS is channel header option files but these should be used with caution and will only operate on "known" headers and as a result are probably not of too much use to you either.
The conversion channel does have access to the original message headers http://docs.iplanet.com/docs/manuals/messaging/ims52/rm/mta_conf.htm#1044412
but Im afraid I cant point you at an example of where it has been used like this - perhaps someone else can.
WRT moving the message to the top of the message list - I presume this is from the clients perspective - How did you accomplish this in NMS as message views and sorting are almost exclusively a client responsibility ?
Also have you looked at the ENS service available with IMS?
Sorry I cant offer anything more than that but without knowing what functions your previous SMTP plugin performed its a bit difficult.
Ciaran

When building a vacation leave holiday system using SharePoint Foundation 2010 and SharePoint Designer workflows how can I add half day functionality?

Hi,
I have built a vacation leave holiday system for SharePoint Foundation 2010 using SharePoint Designer workflows and Javascript. Everything works perfectly but I'm struggling to design a solution for users to specify half day requests that span over dates
greater than 1 day, i.e. my half day solution works but only when the start and end date are the same. How would I change the user interface to allow users to choose which day they want the half day to be requested when the vacation leave holiday request is
from, say, 6th - 10th Jan 2014?
Thanks.

Hi ,
I have a test on my machine with a custom approval workflow and it can work normally .Here are the detailed steps :
1.
Open the site in SharePoint Designer .Create a workflow to associate with the document library .Set the workflow to start when an item is created and when an item is changed
.Also allow the workflow to start manually .
2.
Choose ‘Collect Data from a user’ .
3.
Click on the data and give a name to the Task created .
4.
Define the custom form field name as ‘Approve ?’ .Set the information type as Choice .
5.
Set the choices as ‘Approve’ and ’Reject’ .Display as Checkboxes .Uncheck the ‘Allow fill-in values’ and ‘Allow blank values’
.Click finish to save .
6.
Click on users and add the users who will approve the documents .
7.
Keep the output to variable as collect .
8.
Add a new step .Choose ‘If any value equals value ’ .Set the any value ‘Data source’ as workflow variables and parameters .Set the ‘Field
from source’ as Variable: collect .
9.
Set the value behind ‘equals ’ as ‘Approve’ .
10.
Add a new action ‘Update list item ’ .Set the item as current item .Add the field Approval status as Approved .
11.
Add an Else-if branch to update the Approval status as Rejected .
12.
Publish the workflow and test in your site .
Thanks,
Entan Ming

How can I add custom toolbar buttons to load different TOCs?

In my WebHelp output, I want to have custom buttons on the toolbar that when clicked load a specific TOC in the left navigation pane. For example, when the user clicks the PC button, the PC TOC loads in the left pane. When the user clicks the VM button, the VM TOC loads in the left pane. All of the help files are managed in one project and some files will appear in both TOCs.
I think this should be possible but not sure how to make it happen. Is there some JavaScript that I should add to the custom toolbar item to load the TOC on click? How do I specify the TOC that I want to show for each button?
BTW - I'm using RoboHelp 8 (8.0.2) to generate WebHelp output. Thanks in advance for your help!

Hi there
If you were to upgrade to RoboHelp 9 it would simplify your issue. Version 9 offers a new feature called Dynamic User-Centric Content (DUCC) and provides a nifty little drop-down selector in the Navigation Mini-toolbar.
As you are on version 8 the only way I can fathom you would manage this is by generating two different outputs. Each output would use its respective TOC. The Toolbar button in each project could be configured to open the other project.
You might first decry having to manage two outputs and all the files. But if you pick apart DUCC and the way it is configured by Adobe, it works in much the same manner. It's just hidden from your initial view.
Cheers... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7, 8 or 9 within the day!
Adobe Certified RoboHelp HTML Training
SorcerStone Blog
RoboHelp eBooks

How can I add custom captions to a waveform graph scale?

I have an application that displays one or more signals in a WvfmGraph. The X Axis is set by a hardware encoder giving signals vs. distance (measured length). I would like to change the caption of the XScale according to the values of one of the signals. Its similar to an XY graph, but differs in that I want to see the data unrolled.
The problem is that the X Axis scale markers are fixed. I would like to ask the graph what is range property of the X Axis scale. Then use that information and a derived position signal to replace the marker values with values from a derived signal that includes relative motion.
For example, measuring a unit 100 feet long results in measurements of 200 feet worth of data (out and back). The customer would like to see this data unwrapped 0, 50, 100, 50, 0.
One alternative is to use an XY Graph, but the data on top of itself. Not necessarily a bad thing, but not the same as what they have always had.
I found a similar post to display the scale at a rotation (CW or CCW) and was able to get it to work for my specific case. The problem is that my picture marker values are not aligning nicely with the corresponding gridlines.
Attachments:
Position vs MeasuredDistance.PNG ‏43 KB
Position vs. PseudoPosition.PNG ‏37 KB

Stephen,
Thanks for replying to my post. XScale.Range does not handle this situation. In "rigorous" terms, LV does the right thing with X axis scale markers and put them where you want. I tried to set custom Marker values as: {0, 50, 100, 50, 0} and only saw the first three values. My guess is that under the hood, the spacing is set to 'Arbitrary' and my custom values are overwritten. Not what I intended, but I admit my task is not the normal use case.
Today I am prototyping the entire application with each WvfmGraph replaced with XYGraph's. Good thing I used a modular design and passed Refnums around to all my subVI's. Depending on a review of this prototype, I might skip this graph scale formatting.
FYI, the original graph issue wanted to rotate the marker labels CCW. They hid the graphs XScale and used a custom picture to display the new scale. There is a VI that formats an axis with custom labels, where the font, text, etc. can be customized. I have a working example of that custom scale on a Wvfm graph. I stopped refinement when I tried to consider use cases for how the user would zoom on the data, how the graph's label's would appear if the DAQ signal indicated that the part reversed on itself. All the data is better visualized on an XY Graph.
p.s. are you one of the Waterloo Labs engineers? Great stuff!

How can I add custom right-click-menu to column headers in JTable?

Can anyone point me to a topic on how to customize a popup menu for column headers in JTable? Specifically, I want to add things like "auto-size column" and "hide column".
Thanks,
Matt

Right-click on your table. Then go to Advanced->Runtime Shortcut Menu->Edit.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

How can i add custom art to playlist cover on iPad/iPhone/iPod?

I make a lot of custom playlists, with songs from multiple albums and sometimes multiple artists in one playlist.
Most are created on my Macbook Pro OS 10.6.8 (iTunes 10.6.1) and manually copied over to the devices- i don't automatically synch because my music libary is too big and complex. IE, iTunes is set to Manually Manage Music for these devices.
On my i-devices (primarily iPad 2 and iPhone 4), the playlists show up without art work for the playlist, just a generic picture of a musical note, even tho on the source Macbook the songs have cover art. I find this actually dangerous for use in my car, because it forces me to read the playlist titles. Just glancing at pictures would be much safer, quicker, and easier. But i can't find a way to make all the playlists show cover art.
Playlists i create on the devices themselves DO show a tiled image of all the album covers for the art work.... which is fine. but i can't figure out a way to get playlists that are copied over from my Macbook to show art... and that's the main source of my playlists.
help?
i have too many devices -there's also an older iPod Touch i use in addition to the iPad and iPhone- and too many playlists to create each playlist on each device from scratch so that it shows artwork.
Anyone have suggestions?
(btw, if solution involves upgrading to Lion, i can't; i have software i have to use that doesn't work in Lion).

ps iPad 2 is iOS 5.1

How can I add custom artwork to my playlists?

This is something I would love to see introduced. The only way you can achieve this just now is to join the Community Rock Star programme (see link on my profile) and get active in the community to become a Rock Star. Once you have this status you are allowed to add artwork.
Hope this helps!

Hello A1exei, right now the feature isn't available, but it is under consideration. Add your kudos to the thread I linked, and toss in a comment to keep the suggestion alive. Please don't hesitate to let me know if you have any other questions!

How can I add a new message(custom text message) to the holiday approval em

How can I add a new message(custom text message) to the holiday approval email-notification sent to the manager?
TIA

The answer is 'not very easily', unless the information you want to display is the employee's leave balances. In 12.1.3 Oracle have delivered functionality that allows you to include the leave balances in the approval notifications out-the-box, ie, without customization.
For any other information you're probably going to have to customize the standard delivered HRSSA workflow. Within this workflow, the Leave of Absence functionality uses the Notify Approver (Embedded) (HR_APPROVER_NTF) notification. The body of this notification is set to the Notify Approver (Embedded) (HR_NTF_EMBEDDED_REGION) attribute. This in turn defaults to:
JSP:/OA_HTML/OA.jsp?OAFunc=-&HR_EMBEDDED_REGION-&NtfId=-&#NID-
So essentially you can change the HR_APPROVER_NTF notification. The problem with changing this notification is that it's generic - it's used for all SSHR functions and not just Leave of Absence. That means you have to make other, more substantial, customizations to the workflow to ensure the changes you make only applies to LOA.
The other option is to personalize the review page (ie, the region referenced in &HR_EMBEDDED_REGION) to include whatever messages you want. But that means they'll appear on the Review page and all LOA approval notifications and that might not be what you want.
It's usually better to live with what Oracle deliver and find an alternative solution! What's the content of the message you want to include?

How can I add customer partner function entries in LSMW?

Similar Messages

Maybe you are looking for