How can I add/edit a category to multiple contacts at once?

I have a few lists created in Thunderbird which I'd like to access for other purposes via categories. How can I edit several contacts all part of a list to assign/edit categories at once?

After downloading and installing addon MoreFunctionsForAddressBooks.
open Address Book
Select various contacts
right click on highlighted contacts
select: Edit properties collectively

Similar Messages

  • How can I add "Edit with Photoshop CS5" to the Edit With options?

    How can I add "Edit with Photoshop CS5" to the Edit With options?

    I think it has something to do with the order in which the PSE and PS are installed on your machine.
    For me, I can see option for editing in photoshop both in edit menu and from the action bar. I probably had Photoshop installed on my system before PSE

  • How can I add an address map to each contact?

    Hello:
    When tapping a contact address in the Address application, the map view pops up and I can add a pin for the specific address. However, when I close the application the map disappears. I also notice that if I click on the lower right corner of the map screen, I see an option labeled "list."
    I've got two questions:
    1. What function does the list provide? (I've tried looking in the user's guide and there is no mention of this feature.)
    2. Can I permanently store the map for each contact on my iPod, or does it need to reload each time using wi-fi?
    Thanks.

    its going to have to reload the map each time, it can't save it.

  • How can I add a custom title to multiple ALV reports selected by layout?

    Greetings and good day, everyone!
    Within the past week or so, I posted a question asking the best way to create a program that would generate multiple ALV reports.  I got some great ideas, and I've actually coded up a few simple demos based on your feedback -- thank you!
    Here's the issue I'm running into:  Many of you suggested that I put all report records into one table, and create a field that I could use to filter on later to determine which fields I want to display for the report.  For example, if I have 3 different reports, I put all the fields for all 3 reports into a table.  I then add a "report key" field.  As I put records into the report table for report 1, I code "01" into the "report key" field.  I do the same for reports 2 and 3, assigning each a "report key" of "02" and "03", respectively.
    I then set up layouts in the ALV for each of the three reports, using the filter option to only pull records with the "report key" value for that particular report.  This all works wonderfully!  However, I seem to have lost the ability to show a custom title for each layout.  I can create a generic TITLEBAR (like "Reporting Center") but I don't know how to reset the grid's title when a layout is selected.  I was hoping that SAP might use the layout description as the title on each page, but it doesn't -- it uses the TITLEBAR text.
    Any ideas?  I think this might be the best way to program multiple ALV reports, but if I can't display the right report title for a particular layout, I'll probably have to go back to my other alternative of putting each report in its own container/screen, and having a button to access each report from the application toolbar.
    Thanks,

    Srikanth,
    I don't have any Selection Screen radio buttons for the user to select a particular report; in my case, they specify some needed criteria by the program in the Selection Screen, the program goes off and does a fair bit of processing/updating, and then displays the ALV reports when finished.  They don't want to choose one particular report to view ahead of time; they want to have all 3 (in my case) there to see what processed correctly, what was eligible to process but kicked out with errors, and what failed some matching checks done up front (this layout includes additional fields from the input file so they can see what didn't match up against R/3).
    So, while I do like the code example you presented, I don't think it's going to help me in my case.

  • ICal Lion is infuriating. How can I add a new event in a chosen calendar without having to create it in my default then edit it?

    iCal Lion is infuriating. How can I add a new event in a chosen calendar without having to create it in my default then edit it?

    We are all entitled to our own opinions. So I respect you there brother
    But then again, Apple has its own basis. iOS is what's selling like pancakes not Macs, so if the gazillions out there are using iOS device and have gotten used to the calendar in their iOS devices. Wouldn't you think it made sense if Lion has the same calendar look and feel?
    Everything was considered and weighthed when they developed Lion. They even mentioned it in the press, They were blown away with the success of iOS so they are extending it to OSX.
    Quite frankly, I like the old iCal but yeah I don't expect anything in SL to stay in Lion otherwise it'll be another Cat name related to Leopard
    People should start looking at this perspective and not get STUCK in the old OS.

  • How can I add a hyperlink to a PDF with OSX 10.9? The "Help" article says to use the "add link" feature under "edit." It's not there.

    How can I add a hyperlink to a PDF with OSX 10.9? The "Help" article says to use the "add link" feature under "edit." It's not there. I could add links w/ the previous OS. Time sensitive project.

    Which application are you using?
    Clinton

  • HT5824 how can i add and edit my contatcs from my iphone

    Hello please help me ..
    how can i add and edit my contatcs from my iphone

    Hello there ttikkiscy,
    It sounds like you would like to know how to add to and edit your iCloud Contacts. First make sure you are using the iCloud Contacts function with this article:
    iCloud: Change iCloud feature settings
    http://support.apple.com/kb/PH2613
    On your iOS device’s Home screen, go to Settings > iCloud, then tap to turn on or off iCloud features.
    Once that is turned on and you can see your contacts in the Contacts app, use this part of the iPhone Basics guide here http://support.apple.com/kb/TI138
    Create and edit a contact.
    In Contacts, tap + to pull up a new contact card. Enter the person’s info and tap Done.
    To edit a contact, pull up the card and tap Edit. Make your changes and tap Done to save.
    To delete, scroll down, and tap Delete Contact.
    Thank you for using Apple Support Communities.
    All the best,
    Sterling

  • How can i add an Engraving after i order the ipad ( add, not edit)

    how can i add an Engraving after i order the ipad ( add, not edit)

    Sorry, I don't mean to appear rude, but I don't understand the question. What do you mean "how do you call"? You pick up the telphone and call the store's number, just as you would any other person or company.
    None of the Apple Stores have on-line chat.
    Regards.

  • How can i add an administrator access so the admin can edit his webpage on the web browser?

    How can i add an administrator access so the admin can edit his webpage on the web browser?

    A content management system or CMS is software usually on the server that allows client's to log-in and edit content from any web browser with an internet connection.  These web pages are typically built with server-side programming (PHP) and databases (MySql). 
    CMSs come big and small.  The right one for your project depends on
         a) your programming skills,
         b) project requirements,
         c) budget.
    COMMERCIAL CMSs:
    Cushy CMS (watch the video to see how it works)
    No PHP or databases required.  Editing is performed on their web site.
    http://www.cushycms.com
    Perch ($59 license per site)
    PHP & MySql required
    http://grabaperch.com/
    WebAssist Power CMS Builder - Extension for DW
    PHP & MySql required
    http://www.webassist.com/dreamweaver-extensions/powercms-builder/
    Adobe Business Catalyst (full subscription includes CMS & web hosting)
    http://www.businesscatalyst.com/
    OPEN SOURCE CMSs:
    Get Simple CMS
    PHP & XML required.
    http://get-simple.info/
    e107 CMS
    PHP & MySql required
    http://e107.org/
    WordPress
    PHP & MySql required
    http://wordpress.org
    Joomla!
    PHP & MySql required
    http://joomla.com
    Drupal
    PHP & MySql required
    http://drupal.com
    Concrete 5
    PHP & MySql required
    http://www.concrete5.org/
    Nancy O.

  • How can I add a second authorized user to my installation of Adobe Digital Editions?

    I have initially installed with one user.  I have purchased a digital book using my credit card and id from Barnes & Noble.  I can't open the content without proper ADE authorization.  How can I add another user authorization to ADE?

    Paul, if you used one ID to install ADE, you cannot download an ebook from
    a site into ADE if you used a different ID.  That's the way the Digital
    Millenium Copyright Act of 2000 was implemented to prevent unauthorized
    copying of ematerials.  ADE tells you that in its HELP section.  You can't
    add a second ID to ADE either, for the same reason.
    What you CAN do is to change users, and authorize ADE with the same ID you
    used when you downloaded the ebook.  You do this by bringing ADE up, then
    using the CNTLSHIFTD key combination, you will deauthorize ADE.  Close
    ADE and reopen it, and ADE should ask you to authorize it.  At this point,
    you can enter the second ID, and ADE will take off from there.  BUT, keep
    in mind that any other ebooks you downloaded into ADE with the first ID
    will not be accessible until you go through the same process again and
    revert to the first ID.
    Hope this helps!
    =============

  • How can I add a custom attribute to a catalog area? (CRM Isa Sales)

    Gents,
    How can I add a custom attribute to a catalog area? (CRM Isa Sales)
    Actually I would like to use the Catalog Area Type (maintained in trx COMM_PCAT_ADM on Catalog Area Header level). This field doesn't seem to be available in J2EE webshop. (The field documentation says it is for documentation purposes only so I don't expect it to be transferred).
    As this field is not readily available, I would like to add is as an attribute to the Catalog Area. BADI's PCAT_IMS_FEED_ATT and PCAT_IMS_FEED_VAL seem to indicate that it should be possible to add additional fields not only on product level, but also on Area level:
    Example implementation code:
    method IF_EX_PCAT_IMS_FEED_ATT~READ_NEW_FIELDS.
    * Example, how to add new attributes to a indexcategory
    * Possible levels are 'C'ategory and 'P'roduct.
    * Field 'VALUE' carries the attributetype ('S'tring, 'I'ntegar or
    * 'F'loat)
    * Structure 'IS_OBJECTS' carries actuall identifiers
      data: ls_fields        type comt_pcat_ims_feed_ux.
      case iv_level.
        when 'C'.                        "Category Level
    *     no new field
        when 'P'.                        "Product Level
          ls_fields-field = 'CUSTOMER_EXIT_FIELD'.
          ls_Fields-value = 'S'.
          append ls_fields to ct_fields.
    *     exproduct fields
          ls_fields-field = 'REMAN_ABL'.
          APPEND ls_fields TO ct_fields.
          ls_fields-field = 'EXCH_BUS'.
          APPEND ls_fields TO ct_fields.
      endcase.
    endmethod.
    However, when I create an implementation and add some code in the when 'C' part, the attributes do not seem to get transferred. (I've checked in the debug mode of the developer studio).
    - My example code:
    METHOD if_ex_pcat_ims_feed_att~read_new_fields.
    * Possible levels are 'C'ategory and 'P'roduct.
    * Field 'VALUE' contains the attributetype
    * ('S'tring, 'I'ntegar or * 'F'loat)
      DATA:
      ls_fields LIKE LINE OF ct_fields.
      CASE iv_level.
        WHEN 'C'.                        "Category Level
          ls_fields-value = 'S'.
          ls_fields-field = 'ZTEST'.
           APPEND ls_fields TO ct_fields.
        WHEN 'P'.                        "Product Level
      ENDCASE.
    ENDMETHOD.
    and:
    METHOD if_ex_pcat_ims_feed_val~read_new_fields.
      CASE iv_level.
        WHEN 'C'.
         ls_fields-field = 'ZTEST'.
         ls_Fields-value = 'Value 1'.
         append ls_fields to ct_fields.
        WHEN 'P'.
      ENDCASE.
    ENDMETHOD.
    In the ABAP debugger, I can see that my code is touched during initial and delta replications, however, after replication, the fields do not show up in the Java debugger.
    Any ideas?
    regards,
    Wilco Menge

    Hi,
    How can I customize the /bin/wcmcommand or how can I make use of [2] to create a custom WCMCommand?
    I think the "formUrl" is to post those input value to the jcr repository?
    var createDialog = {
            "jcr:primaryType": "cq:Dialog",
            "id": CQ.Util.createId("cq-createdialog"),
            "title":CQ.I18n.getMessage("Create Page"),
            "formUrl": CQ.shared.HTTP.externalize("/bin/wcmcommand"),
            "params": {
                "cmd":"createPage",
                "_charset_":"utf-8"
    I have added a field called "starred"
    Moreover, when I using the firebug to trace the post command, I can see that the starred value is posted also.
    :status
    browser
    _charset_
    utf-8
    cmd
    createPage
    label
    b
    parentPath
    /content/keyword_elaboration
    starred
    c
    template
    /libs/collab/commons/templates/form
    title
    a
    Source
    cmd=createPage&_charset_=utf-8&%3Astatus=browser&parentPath=%2Fcontent%2Fkeyword_elaboration&title=a&label=b&starred=c&template=%2Flibs%2Fcollab%2Fcommons%2Ftemplates%2Fform
    However, when I go to the crxde to view the node's attribute, the properity starred is not created
    Are there anything I did wrong or missing?
    Thanks.
    Message was edited by: aslkit

  • How can i add filename on a document in pages 5.1 ?

    I am allways using a template to make documents, that I save under different names. How can I add the (changed) filename in the footer of a saved document ?
    It is important to me to print the filename on document, to find and edit it on my mac later.
    In MS Word it is easy to automaticaly add filenames, path, author and other filedata to the document. I can't find how to do that automatically in Pages templates.
    I saw earlyer answers to this question on this community, but they don't work as I expect, or only on earlier versions of pages.....  I trust there is an easy way to do this.
    Can someone help me please ?

    That function, present in "Pages 09" (i.e. Pages 4.3) , was not included in Pages 5.0-5.1.  (Nor were nearly 100 other such features, from mail merge and bookmarks to non-contiguous text selection, 2-up page viewing and the ability to set alternating left/right margins, headers & footers.Version 5.1 is also notably buggy. One work around, or partial work around, is to click the file name at the top of the window document. You can then select the filename, copy it  and paste it whereever you like. As far as I can see, however, there is no way to include the path: all you get is the filename and extension.

  • HT201317 how can I add multiple photos to camera roll

    how can I add multiple photos to camera roll

    If you mean from photo stream, open your photo stream album on your phone in the thumbnail view, tap Edit, tap all the photos to select them, tap Share, then tap Save to Camera Roll.

  • How can i add  fields to a cube which is in production support

    hi,
       how can i add fiels to a cube which is in production support.

    Hi Maruthi
    You need to add new fields to cube in Development system and then transport it to production after testing.
    Edit cube in RSA1. Add the new infoobjects from right hand directory to left hand pane and assign these new infoobjects to suitable dimensions. Save and activate the infocube. Now go to change update rules for this infocube and do proper mapping of these infoobjects.
    Save & activate the update rules.
    RSA1-> Transport connection-> select cube, update rules and related objects and create transport request.
    After testing is done, give the transport request number to your Basis person and he will do the transports for you.
    Regards
    Pradip

  • I'm setting up Apple ids, and its not giving me the option to set up a rescue email. How can I add one?

    I'm setting up Apple IDs, and its not giving me the option to set up a rescue email. I've set up Apple ID's in the past, and its always given me the option. How can I add a rescue email?

    You can find the instructions here. I removed the screenshots but the text is copied below.
    http://support.apple.com/kb/HT5312?viewlocale=en_US&locale=en_US
    You can edit or delete your rescue email address at My Apple ID. To edit your rescue email address:
    Navigate to My Apple ID using your web browser.
    Click "Manage your account"
    When prompted, sign in using your Apple ID and password.
    Click Password & Security
    You'll be asked to answer 2 of your 3 security questions before you can make any modifications. If you are unable to remember your answers, you can choose to send an email to your rescue email to reset your security questions.
    Note: The option to send an email to reset your security questions and answers will not be available if a rescue email address is not provided. You will need to contact iTunes Store support in order to do so. 
    After you've validated your identity by correctly answering your security questions, click Edit to the right of your rescue email address.
    Once you've finished editing your rescue email address, click the Save button directly below the email field.  

Maybe you are looking for