How can I authenticate with card which status is 'OP_READY' ?

Hello~
I'm doing personalization of smart card.
I'm able to personalize the card which status is 'INITIALIZED'.
However...
According to spec , server follow below process to authenticate with card which status is 'OP_READY'. In that process, select CM is ignored.
Reset Card->Generate Server_Challenge->Intialize session
During that process, I wonder about a few things.
1) When I receive a card from suppliers , what is the status of card?
Is it 'OP_READY' or "INITIALIZED' ?
If it is 'OP_READY' , I have to establish a secure session using ISK
to change the status to 'INITIALIZED'.
How can I authenticate with card using ISK?
Any comments would be greatly appreciated

Hello there,
If you can Authenticate (by that I mean send an Initialise Update command and External Authenticate command) successfully the ISD keys are already on the card. If you cannot Authenticate then you will need to load these onto the card and this is done with the Put Key command. You need to load 3 keys - these are 16 byte keys usually all with the same value e.g. 41 42 ...........4F. Once these keys are on the card you need to set the SCP option (which should be 0105) and then you will be able to Authenticate. You will then be able to send a Set Status command to change the life cycle state of the card (either with the apdu or from an applet using the setCardContentState() method).
I'm guessing that your JCOP card probably has the ISD keys on already and has the SCP option set so there is no need for any additional keys to be loaded at this stage.
Hope this helps,
Stephanie

Similar Messages

How can i get my card 's state from op_ready to initialize

i work with JCOP tools and Eclipse 2.1 ,now the card's state is op_ready,and i want to change it's state to initilize,then what shall i do?Any help will be appreciated.
Thanks!

Hello there,
If you can Authenticate (by that I mean send an Initialise Update command and External Authenticate command) successfully the ISD keys are already on the card. If you cannot Authenticate then you will need to load these onto the card and this is done with the Put Key command. You need to load 3 keys - these are 16 byte keys usually all with the same value e.g. 41 42 ...........4F. Once these keys are on the card you need to set the SCP option (which should be 0105) and then you will be able to Authenticate. You will then be able to send a Set Status command to change the life cycle state of the card (either with the apdu or from an applet using the setCardContentState() method).
I'm guessing that your JCOP card probably has the ISD keys on already and has the SCP option set so there is no need for any additional keys to be loaded at this stage.
Hope this helps,
Stephanie

How can I authenticate and authorize with Web Service on ESB ?

Hello,
I want to authenticate and authorize client with Web Service published
by HTTP/SOAP BC.
Simply if it is an Web Service as J2EE application, I will use
Basic Authentication with JAX-RPC and Realm.
But I think that Web Service published by HTTP/SOAP BC is not belong
to J2EE Application. Threre is no place to describe security role mapping
(like web.xml).
JBI 1.0 the section "5.5.1.1.3 Normalized Message Properties" comments
JAAS Subject is given in the NM Properties. Really in this package
com.sun.jbi.internal.security.*
implements JAAS autentication and authorization (at JaasAuthenticator).
But I can't see how to configure my Service to use this.
How can I authenticate and authorize with Web Service on ESB ?
I referred to the resources.
Mutual Authentication for Web Services: A Live Example
http://developers.sun.com/prodtech/appserver/reference/techart/mutual_auth.html
XML and Web Services Security
http://java.sun.com/j2ee/1.4/docs/tutorial/doc/Security7.html
JAAS Authentication Tutorial
http://java.sun.com/j2se/1.4.2/docs/guide/security/jaas/tutorials/GeneralAcnOnly.html
Thanks,
Takurou
- environment ---------------------------------------------
OpenESB : Project Open ESB Starter Kit
AppServer : Sun Java Systems Application Server 9.0 PE
OS : Windows XP
I don't assume to use SSL (if It's necessary I will try).
User information is stored in a LDAP Server.
-----------------------------------------------------------

Hello,
I read this resource.
SecurityDesign
http://www.glassfishwiki.org/jbiwiki/Wiki.jsp?page=SecurityDesign
Then I think [non-ssl and ssl/tls and so on] securing by basic authentication is ongoing feature at this time.
But I can't see well why this page comments 'HTTP over SSL, TLS'.
HTTP/SOAP Binding Component Overview
http://download.java.net/general/open-esb/docs/jbi-components/httpsoap-bc.html
Does BC support only "SSL server authentication" ?
Doesn't BC support "SSL client authentication" by username/password ?
Thanks,
Takurou

How can I work with my adobe Lightroom Version 5 which was added to my Samsung NX3000. If I want to load an .SRW File it is not possible, only the .JPG File. How and from where can I the Module and how is it to install ?

How can I work with my adobe Lightroom Version 5 which was added to my Samsung NX3000. If I want to load an .SRW File it is not possible, only the .JPG File. How and from where can I the Module and how is it to install ?

You need Lightroom 5.5 or later (the most current version is 5.7.1). This is a free update if you have already purchased an earlier version of Lightroom 5.
Product updates

HT201209 Hi, I have a prepaid visa card but when I want to purchase a product, I face" please connect to Itunes support to complete this transaction". what should I do and how can I connect with Itunes support?

Hi, I have a prepaid visa card but when I want to purchase a product, I face" please contact to Itunes support to complete this transaction". what should I do and how can I contact with Itunes support?

These are user-to-user forums, you are not talking to Apple here and they don't monitor these forums (I've asked the hosts to remove your email address from your post).
You can contact iTunes support here and ask why you are getting the message and how to resolve it : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page

HT201209 i dont have credit card how can i proceed with my apple id i got stuck at billing process

i got stucked in the billing process because i dont have credit or debit card how can i continue with that

You will need to create a new account, and follow the instructions on this page when creating it : http://support.apple.com/kb/HT2534 - without following them you will need to give credit card details (I don't think that debit cards are still accepted)

How can I create a card with only a picture on the front - inside blank

How can I create a card that only has a picture on the front and the inside is blank?

Use the Holiday Colors theme for a folded card. For the outside select the layout that just includes a full page photo. For the inside select the layout that suits your eye..
As far as the text boxes are concerned just put a single space in them and then order.
OT

I am having macbook air recently my iphotos did not open and was showing report apple and reopen but i came to know that by pressing alt and iphotos i open an new photo library and stored the pics but now how can i get the pics which i had in the earlier

i am having macbook air recently my iphotos did not open and was showing report apple and reopen but i came to know that by pressing alt and iphotos i open an new photo library and stored the pics but now how can i get the pics which i had in the earlier photo please help me to recover my photos

Well I'll guess you're using iPhoto 11:
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

HT202667 how can I remove credit card from apple id ?

i don't want to use apple id with credit card anymore i purchased enough apps for my apple device so now i wanna remove it so how can i remove credit card from apple id

On your computer's iTunes you should be able to edit your payment info by going into the Store > View Account menu option and logging into your account, and on your account's details page there should be a payment link. If you are doing it on your iPhone then tap on your id in Settings > iTunes & App Store and tap on 'View Apple ID' on the popup and log into your account - that should also give you a payments link on your account's page.
Changing payment info : http://support.apple.com/en-gb/HT1918
If you don't get the 'none' option on the payment details screen : http://support.apple.com/en-gb/TS5366

IP Job in BW finished, but how can I check the IDoc receive status in BW ?

Hi,experts
After I execute a Infopackage with loading more than 200000 records data, the infopackage monitor show me yellow light, 186020 from 200000 records. this infomation still show me till now, seaval hours,it looks pause here.
And I check the request in the R/3, the Job has finished. as you know it means the R/3 push the IDoc already finished.
and how can I do now ? or how can I check the IDoc receive status in BW side?

Hi,
I too had the same problem, i executed the following to solve the proble, may be this will help you:
1) Go to T-code SM58 and select TRFC and press F6,
2) For manual push of I-Docs, GO to T-COde BD87 select perticular idoc and see the status if it is not executed properly then do the manual push by pressing Execute option,
Thanks,

HT5621 I have moved permanently from the US to live in the UK. when I try to download a UK app I am often told that I cannot use a UK Apple sstore, only a US store. I need to access various UK stores how can I deal with this?

I have moved permanently from the US to live in the UK. when I try to download a UK app I am often told that I cannot use a UK Apple sstore, only a US store. I need to access various UK stores how can I deal with this?

Try here
http://support.apple.com/kb/HT1311
when you have UK Cards etc best to change as well

How can I deal with long sql by the oo4o?

I am using VB and oo4o to develop a sql executor which is a extention of an old system.
For some reason, I have to use oo4o v8.1.7 to deal with Oracle Database 8i to 11g.
But when I send a very long sql(11KB) to it I got a error in the VB enviroment.
The Err.Description is "automention error. Started object is disconnected by the client.".
The Err.Number is "-2147417848 ".
The sql that I send it to the program is a simple select sql that like select a, b, c, substrb(d, 1, 2), substrb(e, 2, 3) .... from A_TBL where A=aa;
This sql is normally executed by the sqlplus but I got an error by the oo4o.
When I insert a '' between the 30Xth items, it got exectuted normally.
ex. select a, b, c, substrb(d, 1, 2), substrb(e, 1, 2) ..... substrb(303th, 3, 4), '', substrb(304th, 1, 2) ... from A_TBL where A = aa;
How can I deal with this problem? Thanks.

So how can use this function correctly?By learning what exceptions are, how they're used, and what you can do to deal with them. There's a tutorial here: http://java.sun.com/docs/books/tutorial/essential/exceptions/index.htmlAnd here's a quick overview:
The base class for all exceptions is Throwable. Java provides Exception and Error that extend Throwable. RuntimeException (and many others) extend Exception.
RuntimeException and its descendants, and Error and its descendants, are called unchecked exceptions. Everything else is a checked exception.
If your method, or any method it calls, can throw a checked exception, then your method must either catch that exception, or declare that your method throws that exception. This way, when I call your method, I know at compile time what can possibly go wrong and I can decide whether to handle it or just bubble it up to my caller. Catching a given exception also catches all that exception's descendants. Declaring that you throw a given exception means that you might throw that exception or any of its descendants.
Unchecked exceptions (RuntimeException, Error, and their descendants) are not subject to those restrictions. Any method can throw any unchecked exception at any time without declaring it. This is because unchecked exceptions are either the sign of a coding error (RuntimeException), which is totally preventable and should be fixed rather than handled by the code that encounters it, or a problem in the VM, which in general can not be predicted or handled.

I want to remove my credit card from my account and only use gift cards for purchases. How can I delete my card number?

I want to delete my credit card from my account and only use gift cards. How can I delete my card number?

You'll want to get in touch with ITunes support for this. Normally when you start an account with the CC you can't remove it yourself. But by contacting iTunes they can get that taken off for you.
Use this link to get in touch with the iTunes advisors
http://www.apple.com/lae/support/itunes/contact.html

In PSE 7, how can I rotate my video, which displays sideways, to vertical?

How can I rotate my video which displays sideways to vertical in PSE 7?
It's a waterfall, I filmed it vertically, but it displays horizontally. Full Edit doesn't work on film clips and the rotate option is greyed out.
Thanks for any feedback.
Kathryn

PSE 7 is Ps Elements, not Photoshop. Try posting in the Photoshop Elements forum, as not many users here are familiar with Elements.
http://forums.adobe.com/community/photoshop_elements?view=discussions

I bought an app for my macbook pro. How can I share that app, which is ipad compatible, to my iPad.

I bought an app for my macbook pro. How can I share that app, which is ipad compatible, to my iPad.

You should check with the software publisher. Although you will need a separate iPad version of the program, some publishers make the iPad version cheap or even free, knowing that you have to buy the Mac or PC version to get the most out of the iPad version.

How can I authenticate with card which status is 'OP_READY' ?

Similar Messages

Maybe you are looking for