How can i catch the gotfocus and lostfocus events
Hi Dear;
i tried to catch the gotfocus and lostfocus events, but i can't.
in the same code i can catch the onclick events.
is there any special code for the gotfocus and lostfocus events?
regards;
Danny;
Whenever I have an issue such as this I fire up the event logger and it will show you exactly which events you can put your hooks into. If you are not using it you should really check it out. Will save you tons of time.
https://www.sdn.sap.com/irj/sdn/businessone-tools
I know it's not the exact answer you were looking for but I hope it helps.
Wayne
Similar Messages
-
How can I catch the exception type c = type i?
How can I catch the exception and display the error message when I assign the u2018ABC123u2019 value to an int data type.
Code is as follow.
REPORT zfsl_sum_functions.
DATA: cin(50),
cout(50),
iin TYPE i,
iout TYPE i,
etext TYPE string.
cin = '123ABC'. " how can i catch this
iout = cin.
WRITE: iout.The CATCH-ENDCATCH statement is obsolete as of release was620. You should use TRY. CATCH. ENDCATCH.
The exception that will be raise is CX_SY_CONVERSION_NO_NUMBER, so you have to catch that exception or a super class of this exception class.
REPORT zfsl_sum_functions.
DATA: cin(50),
cout(50),
iin TYPE i,
iout TYPE i,
etext TYPE string.
DATA: rf_cx_error TYPE REF TO CX_SY_CONVERSION_NO_NUMBER,
errortxt TYPE string.
TRY.
cin = '123ABC'. " how can i catch this
iout = cin.
WRITE: iout.
CATCH CX_SY_CONVERSION_NO_NUMBER INTO rf_cx_error.
errortxt = rf_cx_error->get_text( ).
WRITE errortxt.
ENDTRY. -
How can i catch the jsp checking event ?
As we know, there are three parameters which is about checking in the weblogic.xml, pageCheckSeconds,*servlet-reload-check-secs*,*resource-reload-check-secs*, but how can i catch the checking event when the webapp is active.
The fellowing is my simple test, i deployed a webapp on a weblogic server instance, and it was actived. I wrote a simple bash shell to try to catch the event, but fail. i througnt it may be dependent on the webapp's stage mode. but i change the mode, and try again, it was fail too.
[weblogic@tdy218 ~]$ ls
getLastAccessTime.sh webapps
[weblogic@tdy218 ~]$ ./getLastAccessTime.sh ~/webapps/Test/login.jsp
The file's last access time is: 2011-05-22 11:10:21.000000000 +0800
The file's last access time is: 2011-05-22 11:10:21.000000000 +0800
The file's last access time is: 2011-05-22 11:10:21.000000000 +0800
The file's last access time is: 2011-05-22 11:10:21.000000000 +0800
The file's last access time is: 2011-05-22 11:10:21.000000000 +0800
The file's last access time is: 2011-05-22 11:10:21.000000000 +0800
The file's last access time is: 2011-05-22 11:10:21.000000000 +0800
[weblogic@tdy218 ~]$ ./getLastAccessTime.sh
/bea/wls924/user_projects/domains/base_domain/servers/AdminServer/stage/Test/Test/login.jsp
The file's last access time is: 2011-05-22 11:11:37.000000000 +0800
The file's last access time is: 2011-05-22 11:11:37.000000000 +0800
The file's last access time is: 2011-05-22 11:11:37.000000000 +0800
The file's last access time is: 2011-05-22 11:11:37.000000000 +0800
The file's last access time is: 2011-05-22 11:11:37.000000000 +0800
The file's last access time is: 2011-05-22 11:11:37.000000000 +0800
The file's last access time is: 2011-05-22 11:11:37.000000000 +0800
The file's last access time is: 2011-05-22 11:11:37.000000000 +0800
[weblogic@tdy218 ~]$ stat
/bea/wls924/user_projects/domains/base_domain/servers/AdminServer/stage/Test/Test/login.jsp
File: `/bea/wls924/user_projects/domains/base_domain/servers/AdminServer/stage/Test/Test/login.jsp'
Size: 634 Blocks: 8 IO Block: 4096 regular file
Device: 804h/2052d Inode: 583725 Links: 1
Access: (0644/-rw-r--r--) Uid: ( 502/weblogic) Gid: ( 500/ bea)
Access: 2011-05-22 11:11:37.000000000 +0800
Modify: 2010-05-24 14:49:08.000000000 +0800
Change: 2011-05-22 11:10:21.000000000 +0800
The jsp file's last access time didn't changed in the past.
[weblogic@tdy218 ~]$ more getLastAccessTime.sh
#!/bin/bash
declare -i m=1
declare -i n=100
while [ $m -le $n ]; do
echo "The file's last access time is: $(stat -c %x $1)"
m=m+1
sleep 3
done
weblogic.xml
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE weblogic-web-app PUBLIC "-//BEA Systems, Inc.//DTD Web Application 8.1//EN" "http://www.oracle.com/technology/weblogic/servers/wls810/dtd/weblogic810-web-jar.dtd">
<weblogic-web-app>
<jsp-descriptor>
<jsp-param>
<param-name>pageCheckSeconds</param-name>
<param-value>2</param-value>
</jsp-param>
</jsp-descriptor>
<container-descriptor>
<servlet-reload-check-secs>2</servlet-reload-check-secs>
<resource-reload-check-secs>2</resource-reload-check-secs>
</container-descriptor>
<context-root>/jdbc</context-root>
</weblogic-web-app>
env :
WebLogic 9.2 MP4、Redhat Linux AS 4 Update 8 x86.I tested on WLS 11g ps2(10.3.3) which is running in Development Mode also, but it was the same as WLS 9.2 MP4.
During the weblogic server running, it don't check the application resources , but it will check the $Domain_Home/autodeploy directory every three seconds in Development Mode , the following is the result.
[weblogic@tdy218 ~]$ ./getLastAccessTime.sh /bea/wls924/user_projects/domains/base_domain/autodeploy
The file's last access time is: 2011-05-22 12:01:43.000000000 +0800
The file's last access time is: 2011-05-22 12:01:43.000000000 +0800
The file's last access time is: 2011-05-22 12:01:43.000000000 +0800
The file's last access time is: 2011-05-22 12:01:46.000000000 +0800
The file's last access time is: 2011-05-22 12:01:46.000000000 +0800
The file's last access time is: 2011-05-22 12:01:46.000000000 +0800
The file's last access time is: 2011-05-22 12:01:49.000000000 +0800
The file's last access time is: 2011-05-22 12:01:49.000000000 +0800
The file's last access time is: 2011-05-22 12:01:49.000000000 +0800
The file's last access time is: 2011-05-22 12:01:52.000000000 +0800
Ctrl + ^
[weblogic@tdy218 ~]$ ./getLastAccessTime.sh ~/webapps/Test
The file's last access time is: 2011-05-22 17:26:25.000000000 +0800
The file's last access time is: 2011-05-22 17:26:25.000000000 +0800
The file's last access time is: 2011-05-22 17:26:25.000000000 +0800
The file's last access time is: 2011-05-22 17:26:25.000000000 +0800
The file's last access time is: 2011-05-22 17:26:25.000000000 +0800
The file's last access time is: 2011-05-22 17:26:25.000000000 +0800
The file's last access time is: 2011-05-22 17:26:25.000000000 +0800
The file's last access time is: 2011-05-22 17:26:25.000000000 +0800
The file's last access time is: 2011-05-22 17:26:25.000000000 +0800
Ctrl + ^
[weblogic@tdy218 ~]$ ./getLastAccessTime.sh ~/webapps/Test/
insert.jsp login.jsp query.jsp tdy218.sql WEB-INF/
[weblogic@tdy218 ~]$ ./getLastAccessTime.sh ~/webapps/Test/login.jsp
The file's last access time is: 2011-05-22 11:44:31.000000000 +0800
The file's last access time is: 2011-05-22 11:44:31.000000000 +0800
The file's last access time is: 2011-05-22 11:44:31.000000000 +0800
The file's last access time is: 2011-05-22 11:44:31.000000000 +0800
The file's last access time is: 2011-05-22 11:44:31.000000000 +0800
The file's last access time is: 2011-05-22 11:44:31.000000000 +0800
The file's last access time is: 2011-05-22 11:44:31.000000000 +0800
The file's last access time is: 2011-05-22 11:44:31.000000000 +0800
The file's last access time is: 2011-05-22 11:44:31.000000000 +0800
The file's last access time is: 2011-05-22 11:44:31.000000000 +0800
Ctrl + ^
I set the frequency to every one seconds this time by using sleep method in my Bash Shell script.
#!/bin/bash
declare -i m=1
declare -i n=100
while [ $m -le $n ]; do
echo "The file's last access time is: $(stat -c %x $1)"
m=m+1
sleep 1
done -
How can I get the "Open" and "Save As" dialog boxes to open at larger than their default size?
How can I get the "Open" and "Save As" dialog boxes to open at larger than their default size? I would like them to open at the size they were previously resized like they used to in previous operating systems. They currently open at a very small size and the first colum is only a few letters wide necessitating a resize practically every time one wants to use it. Any help would be appreciated.
hi Prasanth,
select werks matnr from ZVSCHDRUN into table it_plant.
sort it_plant by matnr werks.
select
vbeln
posnr
matnr
werks
erdat
kbmeng
vrkme
from vbap
into table it_vbap
for all entries in it_plant
where matnr = it_plant-matnr and
werks = it_plant-werks.
and again i have to write one more select query for vbup.
am i right? -
With Acrobat 6.0 I was able to copy a stamp in the same position (I mean "exactly" the same one) of different pages just by using the "copy/past" tool.
Now I am using Acrobat XI and it seems like it is not possible anymore: I am copying a stamp and I am trying to past it in anoter page, but it appears in the center of the page (or wherever it wants to...).
Does anyone have a solution?
Thanks in advance.Thank you very much. I'll be waiting for you message.
Messaggio originale----
Da: [email protected]
Data: 26/01/2015 17.56
A: "Umberto Gangi"<[email protected]>
Ogg: How can I use the "Copy and paste" tool in order get stamps in the same position in different pages (Acrobat XI for PC)?
How can I use the "Copy and paste" tool in order get stamps in the same position in different pages (Acrobat XI for PC)?
created by Gilad D (try67) in Creating, Editing & Exporting PDFs - View the full discussion
Well, I was in the same situation so I've developed a tool that allows one to do it. I will send you some additional information about it in a private message.
If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7132586#7132586 and clicking ‘Correct’ below the answer
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7132586#7132586
To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
Start a new discussion in Creating, Editing & Exporting PDFs by email or at Adobe Community
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624. -
How can i clear the usernames and passwords history from all login websites?
how can i clear the usernames and passwords in the log in history of the websites? example when i want to login to my facebook i always type first letter of my e-mail and it comes with the passwords because before i put remember my password, and in other websites so, i just need to delete all this login history and it's not working from the clear everything !!! :S any idea please !! thanks in advance :)
See:
http://kb.mozillazine.org/Deleting_autocomplete_entries
http://kb.mozillazine.org/Password_Manager -
My iPhone, iPad and iPod are all associated with the same Apple ID. How can I remove the iPod and associate it with a new Apple ID without affecting the data on the other devices (note: there is no data on the iPod I want to keep)?
Very simple. Turn off Find my iDevice, then Tap Settings, General, Erase, Erase all content and settings.
-
I've an apple ID used to buy off iTunes and a mobileme account for the calendars and contacts. How can I move the calendars and contacts to the older apple ID and use it for iCloud?
If you remeber the password to that Apple ID then follow these steps
1 - Make sure you have an email address that is NOT an Apple ID
2 - Go to AppleID.Apple.com
3 - Where it reads Manage Apple ID - Sign in
Once you are signed in want to make sure the email address you are wanting to use is NOT set up as a "Recovery/Rescue" email for this account.
[To check this - Main page where you see Primary ID - below do you see the email address you want to use listed towards the bottom? Yes - Delete / No - Good ./. If made any adjustments "Save" Next on the left select "Password & Security" - Answer your security questions you set up "if you have any" then scroll towards the bottom and check to see if you see the email address you want to use. Yes - Delete / No - Good] <-> Also you can change your password on this page as well. Any adjustments made "Save"
Once this is done go back to the main page where you should read "Primary ID" and change the email address that is showing to the new email address youo want. "Save" Done
I learned this not to long ago and worked for me. Hope this helps you! -
How can I change the Country and Credit card Apple ID without loose the app installed ?
Hi, I move from Brazil to Qatar and keep using my account at Brazil since I have a credit card there and the old address.
Today Ireceived a message when I was updating my app at my iPad that I should change my payment method that was rejected (???), I try to update and keep the same message... So now maybe better to use address and card from Qatar.
I could not understand how can I change the country and shop since everything at the address is linked to Brazil.
Also I'm afraid to lose the installed app...
Please, a step by step will help a lot, I have a very low computer experience ...You won't lose apps that are installed. You will lose the ability to update them
Business with the App stores is restricted to those stores in your formal country of residence (your billing address) and a bank supported credit card from that same country. You can buy and update apps with those details only in that country.
If you have established residences and bank supported accounts in other countries you can also use those. You can buy and update apps in those countries using those details.
You cannot interchange them. You cannot merge IDs or purchase details. -
My daughter has been using my iTunes account to buy music and apps. I now want to set up a separate iTunes account for her, with a different login. How can we transfer the music and apps she has already bought to her new iTunes account?
Hello, thank you for your prompt answer. I did have an idea that Home sharing might be the answer but could not quite figure out how to do it. I have enabled home sharing in my iTunes account, put in username and password, clicked on creat etc. But the homs sharing icon doew not appear in the left side of iTunes. So I got stuck. Any further ideas?
-
How can I change the font and color of an email signature?
How can i change the font and color of an email signature?
Mail > Preferences > Signature
Highlight the Signature.
Click Format in the menu bar and select " Show Fonts".
Select the Font.
Highlight the Text.
Click Format in the menu bar and select " Show Colors".
Select the color.
Mail > Preferences > Composing > Message Format: Rich Text
Best. -
How can I delete the video and keep the Audio in a few frames using Imovie 11
How can I delete the video and keep the Audio in a few frames using Imovie 11?
I've met the problem too before. but i solved it with Audio Converter Mac instead of iMovie. If you have similar situation that just want to keep audio but not video, and if your file format is not workable in iMovie, you can use the Audio Converter for help too. it can easily help to extract audio soundtrack from any video format. Or if you need to convert one audio format to another, it is a good choice too, because it supports many common audio output formats.
<Link Edited By Host> -
How can I sync the calendar and contacts from my icloud account to the new icloud account we set for my husband on his iPad and iPhone 5S? I have already set up the Family connections but they are not syncing.
Thanks.
JennyOops my bad...I see that during my troubleshooting I inadvertently left Ringtones unchecked in iTunes.
-
How can i get the itunes and apps store icon on my ipad desktop?
How can i get the itunes and apps store icon on my ipad desktop?
Google are supposed to be working on an iPad maps app.
-
My hotmail account was hacked, so the mail that I use to sign in in itunes also, it's the same. But if I create a new account how can I transfer the money and the apps purchased to the new account ?
I really need help ! I had around 30 $ in my account !Don't create a new iTunes account.
Just update everything with new info/change password/ security questions.
-> https://appleid.apple.com/
Maybe you are looking for
-
Can i install windows on my iphone 4?
Can i install windows 7 on my iphone 4g? if yes,how???
-
Home site of IRCTC.
-
I can no longer open itunes. It says to re-install itunes but it wont let me do that either! what can I do
-
hi friendss coulds anybody please explain , how the cheque is being taken print out , so that it could be given to the corresponding vendor after miro. i kno up to miro , please tell me what the next process with tcode. if any confiruation there to
-
Hi, Can web services be invoked only using TCP, without going through the internet? Elaborating : 1. Suppose I have two systems, with one hosting a web service & another being the consumer - If the consumer has the endpoint location of the service, d