How can I create a page break on z version of HAP_PDF_OFFLINE_FORM ?

I've created a z version of HAP_PDF_OFFLINE_FORM for different enhancements. One change that's baffling me is trying get a page break when the form reaches "2. Current Goals".
I'm pretty sure it's a conditional page break when looping through a table of data, but which one?
Also when setting up the when condition, is a literal suppose to be in single or double quotes? Or none at all?
Any help on this is appreciated. Thanks

Not a clean solution but a fast one without any special tricks:
- create a hidden subform, go to tab Pagination and set the page break here (like Top of next page or anything you want)
- test your condition to make the subform visible and only when visible the page break is applied
If you don´t need a condition, skip item 2. Hope that will help fast, regards Otto

Similar Messages

RE: How can I create a page break in a file?

Thank you, Glen. I tried WriteText. But it didn't work.
Tien Wang
Indus Consultancy Services
[email protected]
From: Glen A. Whitbeck
Sent: Thursday, September 11, 1997 11:59 AM
To: Wang, Tien
Cc: forte-users; owner-forte-users
Subject: Re: How can I create a page break in a file?
Instead of using "WriteLine," try using "WriteText" ("WriteLine" writes
TextData into an open file, while "WriteText" writes data to a stream)
like this:
<method 1>
myFile : file = new();
myFile.WriteText('\f');
Glen
Wang, Tien wrote:
Hi,
I am creating a text file for a report which contains multiple pages.
How can I create a page break in my file? I tried to use the
following
two methods, but neither of them works. Specifically, it seems a
special
character printed in the file. But when I print the file through a
WordPad, it didn't separate pages.
I am currently using version 3.0.C on Windows NT 4.0 with a HP Plus 4
printer. Any help will be greatly appreciated.
Tien Wang
Indus Consultancy Services
[email protected]
>
<method 1>
myFile : file = new();
file.writeLine('\f'); --- \f is the form feed in the C language
<method 2>
myFile : file = new();
j : IntegerData = new( value = 14 );
c : char = j.IntegerValue; -- c now contains ascii 14 (form feed)
p : pointer to char = &c; -- Set a pointer to the character
pageBreakTxt : TextData = new();
pageBreakTxt.Concat(p);
myfile.writeLine(pageBreakTxt);

Tien,
Try myFile.WriteText('\x0c'); instead of myFile.WriteText('\f');
Regards
Richard Stobart
-----Original Message-----
From: Wang, Tien [SMTP:[email protected]]
Sent: Friday, September 12, 1997 6:09 PM
To: Glen A. Whitbeck
Cc: forte-users; owner-forte-users
Subject: RE: How can I create a page break in a file?
Thank you, Glen. I tried WriteText. But it didn't work.
Tien Wang
Indus Consultancy Services
[email protected]
From: Glen A. Whitbeck
Sent: Thursday, September 11, 1997 11:59 AM
To: Wang, Tien
Cc: forte-users; owner-forte-users
Subject: Re: How can I create a page break in a file?
Instead of using "WriteLine," try using "WriteText" ("WriteLine" writes
TextData into an open file, while "WriteText" writes data to a stream)
like this:
<method 1>
myFile : file = new();
myFile.WriteText('\f');
Glen
Wang, Tien wrote:
Hi,
I am creating a text file for a report which contains multiple pages.
How can I create a page break in my file? I tried to use the
following
two methods, but neither of them works. Specifically, it seems a
special
character printed in the file. But when I print the file through a
WordPad, it didn't separate pages.
I am currently using version 3.0.C on Windows NT 4.0 with a HP Plus 4
printer. Any help will be greatly appreciated.
Tien Wang
Indus Consultancy Services
[email protected]
>
<method 1>
myFile : file = new();
file.writeLine('\f'); --- \f is the form feed in the C language
<method 2>
myFile : file = new();
j : IntegerData = new( value = 14 );
c : char = j.IntegerValue; -- c now contains ascii 14 (form feed)
p : pointer to char = &c; -- Set a pointer to the character
pageBreakTxt : TextData = new();
pageBreakTxt.Concat(p);
myfile.writeLine(pageBreakTxt);

How can I create a page break in a file?

Hi,
I am creating a text file for a report which contains multiple pages.
How can I create a page break in my file? I tried to use the following
two methods, but neither of them works. Specifically, it seems a special
character printed in the file. But when I print the file through a
WordPad, it didn't separate pages.
I am currently using version 3.0.C on Windows NT 4.0 with a HP Plus 4
printer. Any help will be greatly appreciated.
Tien Wang
Indus Consultancy Services
[email protected]
<method 1>
myFile : file = new();
file.writeLine('\f'); --- \f is the form feed in the C language
<method 2>
myFile : file = new();
j : IntegerData = new( value = 14 );
c : char = j.IntegerValue; -- c now contains ascii 14 (form feed)
p : pointer to char = &c; -- Set a pointer to the character
pageBreakTxt : TextData = new();
pageBreakTxt.Concat(p);
myfile.writeLine(pageBreakTxt);
-----------------------------------

Tien,
Try myFile.WriteText('\x0c'); instead of myFile.WriteText('\f');
Regards
Richard Stobart
-----Original Message-----
From: Wang, Tien [SMTP:[email protected]]
Sent: Friday, September 12, 1997 6:09 PM
To: Glen A. Whitbeck
Cc: forte-users; owner-forte-users
Subject: RE: How can I create a page break in a file?
Thank you, Glen. I tried WriteText. But it didn't work.
Tien Wang
Indus Consultancy Services
[email protected]
From: Glen A. Whitbeck
Sent: Thursday, September 11, 1997 11:59 AM
To: Wang, Tien
Cc: forte-users; owner-forte-users
Subject: Re: How can I create a page break in a file?
Instead of using "WriteLine," try using "WriteText" ("WriteLine" writes
TextData into an open file, while "WriteText" writes data to a stream)
like this:
<method 1>
myFile : file = new();
myFile.WriteText('\f');
Glen
Wang, Tien wrote:
Hi,
I am creating a text file for a report which contains multiple pages.
How can I create a page break in my file? I tried to use the
following
two methods, but neither of them works. Specifically, it seems a
special
character printed in the file. But when I print the file through a
WordPad, it didn't separate pages.
I am currently using version 3.0.C on Windows NT 4.0 with a HP Plus 4
printer. Any help will be greatly appreciated.
Tien Wang
Indus Consultancy Services
[email protected]
>
<method 1>
myFile : file = new();
file.writeLine('\f'); --- \f is the form feed in the C language
<method 2>
myFile : file = new();
j : IntegerData = new( value = 14 );
c : char = j.IntegerValue; -- c now contains ascii 14 (form feed)
p : pointer to char = &c; -- Set a pointer to the character
pageBreakTxt : TextData = new();
pageBreakTxt.Concat(p);
myfile.writeLine(pageBreakTxt);

How can I create a conditional break in webi ?

Hello Mister and Misses
Can somebody explain me how i can create a conditional break , because i want to limit the number of lines to 9 l ines in a bloc
each 9 lines I want to create a break
Thank you
example :
1   toto
2   titi
3   taa
4   tutu
5   papa
6   popo
7   tata
8   momo
9   mimi
(break)
10 mumu
17 maxe
18 fax
(break)
19..
My first column is not a dimension so, i can't manage to make a break
How is it possible to tranform a measure to a dimension in order to make a break on each 9 lines
thank you

Tien,
Try myFile.WriteText('\x0c'); instead of myFile.WriteText('\f');
Regards
Richard Stobart
-----Original Message-----
From: Wang, Tien [SMTP:[email protected]]
Sent: Friday, September 12, 1997 6:09 PM
To: Glen A. Whitbeck
Cc: forte-users; owner-forte-users
Subject: RE: How can I create a page break in a file?
Thank you, Glen. I tried WriteText. But it didn't work.
Tien Wang
Indus Consultancy Services
[email protected]
From: Glen A. Whitbeck
Sent: Thursday, September 11, 1997 11:59 AM
To: Wang, Tien
Cc: forte-users; owner-forte-users
Subject: Re: How can I create a page break in a file?
Instead of using "WriteLine," try using "WriteText" ("WriteLine" writes
TextData into an open file, while "WriteText" writes data to a stream)
like this:
<method 1>
myFile : file = new();
myFile.WriteText('\f');
Glen
Wang, Tien wrote:
Hi,
I am creating a text file for a report which contains multiple pages.
How can I create a page break in my file? I tried to use the
following
two methods, but neither of them works. Specifically, it seems a
special
character printed in the file. But when I print the file through a
WordPad, it didn't separate pages.
I am currently using version 3.0.C on Windows NT 4.0 with a HP Plus 4
printer. Any help will be greatly appreciated.
Tien Wang
Indus Consultancy Services
[email protected]
>
<method 1>
myFile : file = new();
file.writeLine('\f'); --- \f is the form feed in the C language
<method 2>
myFile : file = new();
j : IntegerData = new( value = 14 );
c : char = j.IntegerValue; -- c now contains ascii 14 (form feed)
p : pointer to char = &c; -- Set a pointer to the character
pageBreakTxt : TextData = new();
pageBreakTxt.Concat(p);
myfile.writeLine(pageBreakTxt);

Can/How can I create a page with all my blog pages RSS??

Hello all.
I have a website containing many seperate Blog pages according to their topics like News, Tech and Scifi.
Is it possible to create a new page, that will contain the latest entries of all these blog pages a one "consolidated" page, maybe perhaps of RSS feed?
Thanks and cheers

Apple states
How can I create a page that aggregates my podcasts?
If you have multiple podcasts listed in the iTunes Store, the iTunes staff can create a single page that lists all of them in one place. We call this page an “artist page.” Note that a podcast can only appear on one artist page.
To request an artist page, navigate to one of your podcasts, click on Report a Concern, and select Remove a Podcast. In the dialog box, explain that you would like an artist page, give us the exact name of the artist (please don’t include “Inc,” “LLC,” etc.), and list the exact feed URLs or links to your podcasts.
at the bottom of this page
http://www.apple.com/itunes/podcasts/creatorfaq.html
I hope two is enough and if not that someone contacts me and maybe even changes the info on the above link.
Thank you for your input!

How can I create a line break in pages for iPad?

On the Mac you can hold the shift key while pressing the return key to creat a line break. Only pressing the return key will creat a new paragraph of course.
On the iPad you only can creat paragraphs. Pressing the shif key does not change that.
Does anybody know how to force a linebrek on the pages app for iPad?

Tap and hold where you wish to insert the line break. Select Insert from the pop up menu, then Line break.
this might be helpful for future reference: http://help.apple.com/pages/ipad/1.7/

How Do I Create a Page Break In Pages For iPad? This time it's different!

I know this has been asked a million times before but my situation is different. On apple help it says place the insertion point where you want the break to happen. How do i move the insertion point? I can only move it by typing and then it only works for the first page. All the other pages i've had to use text boxes to type and now i've resorted to finishing the document on my computer Please help!

No it does not have to be only body test, but you are trying to put the page break into a text box.
Touch the area outside the text box, that is the body of the document and you can insert a page break there.
I have page breaks and text boxes no problem in my docs, it is just a case of knowing what you are doing.
Text boxes sit on top of the body of the document, the body text needs to run under the document, no need to have text in it, it just needs to be there.
I can't help any more, sorry.

How can I create a page item at a certain LEVEL within a layer?

I mean, if I have one frame that I brought to the front, and one that I sent to the back, can I create an item that is between the two? Right now everything I create is automatically on top, and I have to do some scripting to figure out where the other items are at, and then step the new item back, back, back, etc. until I get to where I want, testing at every step to see if it's gone too far.
I can't find a property I can set to move a page item directly to the place in the front-to-back order that I want.
Am I missing something?

Z-ordering is not maintained in scripting properties, but you can use methods. Let's assume topframe and newframe. You can then use newframe.sendToBack(topframe);. Note that this is distinct from newframe.sendToBack(), which sends it all the way back. Check the docs, there are also some requirements for co-parantage between topframe and newframe.

How can I control unwanted page breaks in exported .pdf files?

I am building a form that, for a variety of reasons, must be available offline. Unfortunately, the .pdf export is introducing a page break on the 3rd page that leaves 80% of the page empty. The next element after the page break is a small text field which would easily fit on the preceding page. I have _not_ put any page breaks into this document, so the editor is following its default behavior regarding page breaks. Is there any way to tell the editor not to break at a given spot?
Also, in terms of a more general feature request, it would be very nice if there was a more intelligent method of handling pagination. I understand why (in a separate spot on the same form) the editor is pushing a large form element to the next page (since it won't fit on the previous one), but I would much rather have the option of splitting a large rating scale instrument so that the first half fills one page and the final half (with headings repeated) begins the second page. All of this empty space just looks tacky, and I can't imagine anyone actually wanting the default behavior if it would leave more than a few lines of empty space at the bottom of a page.
Best,
David
P.S. Sorry for the jumbled username; the first 20 or so I tried were taken.

Well, I downloaded the trial of Acrobat XI to see if I could fix this, and lo and behold it allowed me to define the .pdf page breaks exactly as I desired! The "secret" was to switch to page view from the view menu. It also works in the online version of FormsCentral.

How can I create multiple pages, with different layouts to the others, in DW fluid grid layouts?

Hi everyone, : )
I am creating a website using FGL in DW CS6, v12.0 build 5808. I do not have Creative Cloud (do you have to pay to use this service?).
I have created one layout for my home page.
I would like to create several more pages, but I want them to use different layouts (as well as different content).
I tried to do something similar before using 'save as' (this was with a non-FGL), but whenever I changed the original page that I had 'save as'd' from, the layout in all the other pages would change too!
I found a possibility from someone else online suggesting using a template, but have not tried it yet: http://www.linkedin.com/groups/Adding-second-fluid-page-in-119937.S.192422240
I'm a bit scared of breaking everything, as I am new to web design and have had to restart the whole process a few times due to messing up the fluid.css etc and other issues, so I am taking baby steps.
Happy to try whatever's suggested and, while I wait for (I hope) your responses, I think I will try the template thing, but from the reply the person who asked the question gave, it sounds like his subsequent pages changed too, as I mentioned above? *scared* ; )
If anyone can help me with this query I would be very grateful. Thank you! : )

Thanks David.
I tried using different IDs for the other pages, but eventually one of the divs seems to 'break' - it overlaps other divs, or cannot be moved or resized (you can select the outline and it goes blue, but no 'move up a row' or down a row or 'lock to grid' etc icons appear and it can't be drag-re-sized), plus the green overlay disappears (just from that div. I'm aware of how to turn visual aids on and off), so it seems broken. This often seems to happen if you rename a div once it's been created; it does not rename in the layout.css on the right side panel (CSS Styles) in DW and the 'broken' behaviour above is exhibited. Do you know anything about this? Is this the 'edit this doc at your peril' stuff that most tutorials seem to mention? Am I doing something wrong?
I also tried making an FGL and saving out the original boilerplate.css, layout.css and respond.js. Then created multiple new FGLs and each time it created new versions of layout.css (called 'untitled-1', 2 etc.). Once I had created all the FGLs, I deleted all the new boilerplates and untitled.css files. Then restored the original ones and changed the link at the top of each page's html to refer to the same filename (the original layout.css), rather than untitled.css. I thought this might work and it seemed to for a while, but then as I had to add new div names for the sections on each page, it eventually broke (as above).
Anyway, I think you have a good point about different layouts and it occurred to me also while I was exploring and waiting for replies here. I think I will make one layout for all pages and go with that. I have a couple of questions about that though:
1. I think the max number of divs I want for one of the pages is 10, but some pages need less divs. If I only fill e.g. 8 divs on one page, will the other ones be sat there empty? I think they will actually...I guess I'm asking because I have not tried it yet (will do after this) and it takes so long to do this trial and error.
2. If the amount of content in each div is different, e.g. let's say Page 1 has 6 lines of content in div1, but page 2 may have an unlimited amount of content (I will want to add to it in the future). Will this result in the div on page 1 being a huge block of empty space after its 6 lines?
Thanks so much for your help!

How can i create a page like this

Hi
I have a client who liked this page effect the gallery
section looks like the mac doc is there a similar plug in i can
purchase and integrate in one of the html pages?
http://www.belloproductions.com/index-3.html

Hi Kiran,
As you wrote "i selected different pic from standard list,but it is displaying one standard pic only."
I hope you want to change the picture of Headings only ie your workset in above mentioned case right ??
To change the picture go the role->then select added workset -> then open properties of worset ->now look for the
Pictogram properties of workset here from drop down select your desired pic and save the changes.
Now open portal the look for the changes ie new logo for the heading.
If new picture is not coming the try to clear the portal caches and check again .... other way to get the changes remove the
assigned role from user and change the role id and assign to user again now you will get new changes
without clearing the cache.
how to add custom pic?
To add custom pic you need to add the new pictures in the par file called com.sap.portal.navigation.mimeservice.par
So download the this par file from ROOT/WEB-INF/deployment/temp this location from Portal support , even you can copy from server too.
Now import the par file in NWDS and copy your new pic in images directory ..now build the par file again and
upload it on portal. But here new images will only appear in drop down list when you portal is restarted.
I hope you know how to import par in NWDS don't forget to add required jar file in both the lib folders.
There can be other way also to change the picture where portal restart is not needed . So if you don't want to change in this way then search for other method and let me know also.
Regards,
Piyush

How can i create multiple page report using excel report generation toolkit from excel template?

i am having code which create report in excel.but it prints only single page. if content is more than size of template than insted of tacking new page it prints only single page.Please help me out.
Anyone has material for learning activeX in labview? Please mail me on [email protected]
PBP (CLAD)
Labview 6.1 - 2014
KUDOS ARE WELCOMED.
If your problem get solved then mark as solution.

Hi thanks for reply.....
PBP (CLAD)
Labview 6.1 - 2014
KUDOS ARE WELCOMED.
If your problem get solved then mark as solution.

How can I create second page in Pages document?

In my Pages document, I've gotten to the bottom of the page and can't get a second page.

If you are using the wprd processing document it will add a page when go continue to write.
If you use a page layout document and have added a textbox to write your text you have to go Insert > Page > choose text or blank.

How can we create each page in different file while creating PDF with FOP

Hi All,
I am using FOP for creating PDF.
By using XML file and XSL file am creating PDF.
I want to create different PDF files when the resultant PDF has more than one page.
is there any solution for that
thanks.

RickRockUSC wrote:
As title. Thank you guys for answering!
Maybe Acrobat Reader is what you need:
http://get.adobe.com/reader/

How can i create a slideshow with the newest version of dreamweaver?

I am trying to figure out how to create a slideshow but i cannot find any explanations for the new version of Dreamweaver. Can anyone help?

DW doesn't make slideshows. You'll need to use a jQuery plugin or a 3rd party commercial Extension.
Do a web search for:
jQuery Cycle2
jQuery WOW Slider
jQuery Fancybox2
Primer for using jQuery Plugins
Alt-Web Design & Publishing: Primer for Using jQuery Plug-Ins
Nancy O.

How can I create a page break on z version of HAP_PDF_OFFLINE_FORM ?

Similar Messages

Maybe you are looking for