How Can I Create One Entry Sheet For Multiple Line Items of A PO

Please Tell Me How Can I Create One Entry Sheet For Multiple Line Items of A PO

hi,
It is not possible to create single Service Entry sheet for multiple PO line items. It is 1 to 1 relation.
you have to make different service entry sheets for different item of service master.
regards
Manish Joshi

Similar Messages

  • To make service entry sheet for multiple line items of the service PO.

    Hello MM Gurus,
    Please help me for the following
    I create a service PO with say 10 line items. Then while doing the service entry sheet the system automatically picks the line item 10 by default. When I try to enter the other items it throws an error" unplanned services cannot be entered"
    So how to make a service entry sheet which shall include all the line items of the service PO at the same time.
    So if I have 100 items in the PO do we make the service entry sheet 100 times against each item? Is there any seeting/solution on this?
    Please help.
    Regards,
    Prasanna.

    Dear,
    I have two solution for u.
    1) Create different service entry sheet -ML81N for each line item and create single invoice verification for all service entry sheet - MIRO
    2) Create service purchase order - ME21N for only one line item.
    And include all services in service tab available at item detail level of service purchase order. Enter it's quantity and rate.
    Than create one service entry sheet for purchase order.
    So you can create one service entry sheet for all line item of services.
    Note: - Use option 2 for easy process.
    Regards,
    Mahesh Wagh.

  • How can I activate drill down report for planned line items please urgent?

    Hi Everyone,
    Please suggest me how can i activate drill down report for planned line items in internal orders. S_ALR_87012993. Please suggest me, I'll award full points. I am unable to do it in client system, which has already line items. I tried in my sys with new config it is working.
    Kind regards
    Arvey.

    Hi
    It is based on the reports attached in the Report Group - TCODE: GR53
    In the Report Group screen
    Press CONFIGURE – This is to attach any Drill Down reports.
    Press the “Insert Line” icon
    As is the screen may be used to insert a Report Writer report group. To add an ABAP, press “other report type”
    Double click on “ABAP Reports”
    Enter the name of the ABAP and ENTER
    <b>RCOPCA08                       Profit Center: Plan Line Items</b>
    VVR

  • Pls help me to create SO using BDC for multiple line items (VA01)

    Hi all,
    My requirement is to create SO for multiple line items in ECC6.0
    My recording for VA01 is like this.
    start-of-selection.
    perform open_group.
    perform bdc_dynpro      using 'SAPMV45A' '0101'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'VBAK-AUART'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '/00'.
    perform bdc_field       using 'VBAK-AUART'
                                  'ZOR'.
    perform bdc_field       using 'VBAK-VKORG'
                                  '2000'.
    perform bdc_field       using 'VBAK-VTWEG'
                                  '10'.
    perform bdc_field       using 'VBAK-SPART'
                                  '05'.
    perform bdc_dynpro      using 'SAPMV45A' '4001'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '/00'.
    perform bdc_field       using 'VBKD-BSTKD'
                                  'open SO'.
    perform bdc_field       using 'VBKD-BSTDK'
                                  '29.01.2008'.
    perform bdc_field       using 'KUAGV-KUNNR'
                                  '100000'.
    perform bdc_field       using 'KUWEV-KUNNR'
                                  '100000'.
    perform bdc_field       using 'RV45A-KETDAT'
                                  '29.01.2008'.
    perform bdc_field       using 'RV45A-KPRGBZ'
                                  'D'.
    perform bdc_field       using 'VBKD-PRSDT'
                                  '29.01.2008'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'VBAP-WERKS(01)'.
    perform bdc_field       using 'RV45A-MABNR(01)'
                                  'hrpocf'.
    perform bdc_field       using 'VBAP-POSNR(01)'
                                  '    10'.
    perform bdc_field       using 'RV45A-KWMENG(01)'
                                  '                 55'.
    perform bdc_field       using 'VBAP-WERKS(01)'
                                  '2010'.
    perform bdc_dynpro      using 'SAPLCEI0' '0109'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'RCTMS-MWERT(06)'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=BACK'.
    perform bdc_field       using 'RCTMS-MNAME(01)'
                                  'A_THICK_MM'.
    perform bdc_field       using 'RCTMS-MNAME(02)'
                                  'A_WIDTH_MM'.
    perform bdc_field       using 'RCTMS-MNAME(03)'
                                  'A_EQUIVALENT_SPEC'.
    perform bdc_field       using 'RCTMS-MNAME(04)'
                                  'A_BATCH_WEIGHT_MAX_SI'.
    perform bdc_field       using 'RCTMS-MNAME(05)'
                                  'A_BATCH_WEIGHT_MIN_SI'.
    perform bdc_field       using 'RCTMS-MNAME(06)'
                                  'A_COIL_INNER_DIA_MM'.
    perform bdc_field       using 'RCTMS-MWERT(01)'
                                  '3.2'.
    perform bdc_field       using 'RCTMS-MWERT(02)'
                                  '1200'.
    perform bdc_field       using 'RCTMS-MWERT(03)'
                                  'IS_11513_GR_D_1985'.
    perform bdc_field       using 'RCTMS-MWERT(04)'
                                  '26.4'.
    perform bdc_field       using 'RCTMS-MWERT(05)'
                                  '26.4'.
    perform bdc_field       using 'RCTMS-MWERT(06)'
                                  '610'.
    perform bdc_dynpro      using 'SAPMV45A' '4001'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '/00'.
    perform bdc_field       using 'VBKD-BSTKD'
                                  'open SO'.
    perform bdc_field       using 'VBKD-BSTDK'
                                  '29.01.2008'.
    perform bdc_field       using 'KUAGV-KUNNR'
                                  '100000'.
    perform bdc_field       using 'KUWEV-KUNNR'
                                  '100000'.
    perform bdc_field       using 'RV45A-KETDAT'
                                  '29.01.2008'.
    perform bdc_field       using 'RV45A-KPRGBZ'
                                  'D'.
    perform bdc_field       using 'VBKD-PRSDT'
                                  '29.01.2008'.
    perform bdc_field       using 'VBKD-INCO1'
                                  'EXW'.
    perform bdc_field       using 'VBKD-INCO2'
                                  'mumbai east'.
    perform bdc_field       using 'VBKD-ZTERM'
                                  '0001'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'VBAP-WERKS(02)'.
    perform bdc_field       using 'RV45A-MABNR(02)'
                                  'hrpocf'.
    perform bdc_field       using 'VBAP-POSNR(02)'
                                  '    11'.
    perform bdc_field       using 'RV45A-KWMENG(02)'
                                  '                 66'.
    perform bdc_field       using 'VBAP-WERKS(02)'
                                  '2010'.
    perform bdc_dynpro      using 'SAPLCEI0' '0109'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'RCTMS-MWERT(06)'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=BACK'.
    perform bdc_field       using 'RCTMS-MNAME(01)'
                                  'A_THICK_MM'.
    perform bdc_field       using 'RCTMS-MNAME(02)'
                                  'A_WIDTH_MM'.
    perform bdc_field       using 'RCTMS-MNAME(03)'
                                  'A_EQUIVALENT_SPEC'.
    perform bdc_field       using 'RCTMS-MNAME(04)'
                                  'A_BATCH_WEIGHT_MAX_SI'.
    perform bdc_field       using 'RCTMS-MNAME(05)'
                                  'A_BATCH_WEIGHT_MIN_SI'.
    perform bdc_field       using 'RCTMS-MNAME(06)'
                                  'A_COIL_INNER_DIA_MM'.
    perform bdc_field       using 'RCTMS-MWERT(01)'
                                  '3.1'.
    perform bdc_field       using 'RCTMS-MWERT(02)'
                                  '1250'.
    perform bdc_field       using 'RCTMS-MWERT(03)'
                                  'IS_11513_GR_D_1985'.
    perform bdc_field       using 'RCTMS-MWERT(04)'
                                  '20.084'.
    perform bdc_field       using 'RCTMS-MWERT(05)'
                                  '20.084'.
    perform bdc_field       using 'RCTMS-MWERT(06)'
                                  '610'.
    perform bdc_dynpro      using 'SAPMV45A' '4001'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=PDE3'.
    perform bdc_field       using 'VBKD-BSTKD'
                                  'open SO'.
    perform bdc_field       using 'VBKD-BSTDK'
                                  '29.01.2008'.
    perform bdc_field       using 'KUAGV-KUNNR'
                                  '100000'.
    perform bdc_field       using 'KUWEV-KUNNR'
                                  '100000'.
    perform bdc_field       using 'RV45A-KETDAT'
                                  '29.01.2008'.
    perform bdc_field       using 'RV45A-KPRGBZ'
                                  'D'.
    perform bdc_field       using 'VBKD-PRSDT'
                                  '29.01.2008'.
    perform bdc_field       using 'VBKD-INCO1'
                                  'EXW'.
    perform bdc_field       using 'VBKD-INCO2'
                                  'mumbai east'.
    perform bdc_field       using 'VBKD-ZTERM'
                                  '0001'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'VBAP-POSNR(01)'.
    perform bdc_field       using 'RV45A-VBAP_SELKZ(01)'
                                  'X'.
    perform bdc_dynpro      using 'SAPMV45A' '4003'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=T\09'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'VBKD-INCO2'.
    perform bdc_field       using 'VBKD-INCO1'
                                  'EXW'.
    perform bdc_field       using 'VBKD-INCO2'
                                  'mumbai'.
    perform bdc_field       using 'VBKD-ZTERM'
                                  '0001'.
    perform bdc_field       using 'VBKD-FKDAT'
                                  '29.01.2008'.
    perform bdc_field       using 'VBAP-TAXM1'
                                  '1'.
    perform bdc_field       using 'VBAP-TAXM2'
                                  '1'.
    perform bdc_field       using 'VBAP-TAXM3'
                                  '0'.
    perform bdc_field       using 'VBAP-TAXM4'
                                  '0'.
    perform bdc_dynpro      using 'SAPMV45A' '4003'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=TP_DELETE'.
    perform bdc_field       using 'LV70T-SPRAS'
                                  'EN'.
    perform bdc_dynpro      using 'SAPMV45A' '4003'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=TP_CREATE'.
    perform bdc_field       using 'LV70T-SPRAS'
                                  'EN'.
    perform bdc_dynpro      using 'SAPMV45A' '4003'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=TP_DETAIL'.
    perform bdc_field       using 'LV70T-SPRAS'
                                  'EN'.
    perform bdc_dynpro      using 'SAPLSTXX' '1100'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'RSTXT-TXLINE(02)'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=TXVB'.
    perform bdc_field       using 'RSTXT-TXLINE(02)'
                                  'FDGFDG'.
    perform bdc_dynpro      using 'SAPLSTXX' '1100'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'RSTXT-TXLINE(02)'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=TXBA'.
    perform bdc_dynpro      using 'SAPMV45A' '4003'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=T\10'.
    perform bdc_dynpro      using 'SAPMV45A' '4003'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '/EBACK'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'VBKD-POSEX_E'.
    perform bdc_field       using 'VBKD-BSTKD'
                                  'open SO'.
    perform bdc_field       using 'VBKD-BSTDK'
                                  '29.01.2008'.
    perform bdc_field       using 'VBAP-POSEX'
                                  '108128'.
    perform bdc_field       using 'VBKD-BSTKD_E'
                                  '3011192'.
    perform bdc_field       using 'VBKD-POSEX_E'
                                  '000005'.
    perform bdc_dynpro      using 'SAPMV45A' '4001'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=PDE3'.
    perform bdc_field       using 'VBKD-BSTKD'
                                  'open SO'.
    perform bdc_field       using 'VBKD-BSTDK'
                                  '29.01.2008'.
    perform bdc_field       using 'KUAGV-KUNNR'
                                  '100000'.
    perform bdc_field       using 'KUWEV-KUNNR'
                                  '100000'.
    perform bdc_field       using 'RV45A-KETDAT'
                                  '29.01.2008'.
    perform bdc_field       using 'RV45A-KPRGBZ'
                                  'D'.
    perform bdc_field       using 'VBKD-PRSDT'
                                  '29.01.2008'.
    perform bdc_field       using 'VBKD-INCO1'
                                  'EXW'.
    perform bdc_field       using 'VBKD-INCO2'
                                  'mumbai east'.
    perform bdc_field       using 'VBKD-ZTERM'
                                  '0001'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'VBAP-POSNR(02)'.
    perform bdc_field       using 'RV45A-VBAP_SELKZ(02)'
                                  'X'.
    perform bdc_dynpro      using 'SAPMV45A' '4003'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=T\09'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'VBKD-INCO2'.
    perform bdc_field       using 'VBKD-INCO1'
                                  'EXW'.
    perform bdc_field       using 'VBKD-INCO2'
                                  'mumbai'.
    perform bdc_field       using 'VBKD-ZTERM'
                                  '0001'.
    perform bdc_field       using 'VBKD-FKDAT'
                                  '29.01.2008'.
    perform bdc_field       using 'VBAP-TAXM1'
                                  '1'.
    perform bdc_field       using 'VBAP-TAXM2'
                                  '1'.
    perform bdc_field       using 'VBAP-TAXM3'
                                  '0'.
    perform bdc_field       using 'VBAP-TAXM4'
                                  '0'.
    perform bdc_dynpro      using 'SAPMV45A' '4003'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=TP_DELETE'.
    perform bdc_field       using 'LV70T-SPRAS'
                                  'EN'.
    perform bdc_dynpro      using 'SAPMV45A' '4003'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=TP_CREATE'.
    perform bdc_field       using 'LV70T-SPRAS'
                                  'EN'.
    perform bdc_dynpro      using 'SAPMV45A' '4003'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=TP_DETAIL'.
    perform bdc_field       using 'LV70T-SPRAS'
                                  'EN'.
    perform bdc_dynpro      using 'SAPLSTXX' '1100'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'RSTXT-TXLINE(02)'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=TXVB'.
    perform bdc_field       using 'RSTXT-TXLINE(02)'
                                  'GFGFDG'.
    perform bdc_dynpro      using 'SAPLSTXX' '1100'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'RSTXT-TXLINE(02)'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=TXBA'.
    perform bdc_dynpro      using 'SAPMV45A' '4003'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=T\10'.
    perform bdc_dynpro      using 'SAPMV45A' '4003'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '/00'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'VBKD-POSEX_E'.
    perform bdc_field       using 'VBKD-BSTKD'
                                  'open SO'.
    perform bdc_field       using 'VBKD-BSTDK'
                                  '29.01.2008'.
    perform bdc_field       using 'VBAP-POSEX'
                                  '108128'.
    perform bdc_field       using 'VBKD-BSTKD_E'
                                  '3011192'.
    perform bdc_field       using 'VBKD-POSEX_E'
                                  '000005'.
    perform bdc_dynpro      using 'SAPMV45A' '4003'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '/EBACK'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'VBAP-POSEX'.
    perform bdc_field       using 'VBKD-BSTKD'
                                  'open SO'.
    perform bdc_field       using 'VBKD-BSTDK'
                                  '29.01.2008'.
    perform bdc_field       using 'VBAP-POSEX'
                                  '108128'.
    perform bdc_field       using 'VBKD-BSTKD_E'
                                  '3011192'.
    perform bdc_field       using 'VBKD-POSEX_E'
                                  '5'.
    perform bdc_dynpro      using 'SAPMV45A' '4001'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=KKAU'.
    perform bdc_field       using 'VBKD-BSTKD'
                                  'open SO'.
    perform bdc_field       using 'VBKD-BSTDK'
                                  '29.01.2008'.
    perform bdc_field       using 'KUAGV-KUNNR'
                                  '100000'.
    perform bdc_field       using 'KUWEV-KUNNR'
                                  '100000'.
    perform bdc_field       using 'RV45A-KETDAT'
                                  '29.01.2008'.
    perform bdc_field       using 'RV45A-KPRGBZ'
                                  'D'.
    perform bdc_field       using 'VBKD-PRSDT'
                                  '29.01.2008'.
    perform bdc_field       using 'VBKD-INCO1'
                                  'EXW'.
    perform bdc_field       using 'VBKD-INCO2'
                                  'mumbai east'.
    perform bdc_field       using 'VBKD-ZTERM'
                                  '0001'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'RV45A-MABNR(01)'.
    perform bdc_dynpro      using 'SAPMV45A' '4002'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=T\02'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'VBKD-KONDA'.
    perform bdc_field       using 'VBAK-AUDAT'
                                  '29.01.2008'.
    perform bdc_field       using 'VBAK-VKBUR'
                                  'IN15'.
    perform bdc_field       using 'VBAK-WAERK'
                                  'INR'.
    perform bdc_field       using 'VBKD-PRSDT'
                                  '29.01.2008'.
    perform bdc_field       using 'VBKD-KDGRP'
                                  'CF'.
    perform bdc_field       using 'VBKD-PLTYP'
                                  '01'.
    perform bdc_field       using 'VBKD-KONDA'
                                  '01'.
    perform bdc_field       using 'VBKD-BZIRK'
                                  'NORTH'.
    perform bdc_dynpro      using 'SAPMV45A' '4002'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=T\03'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'VBKD-VSART'.
    perform bdc_field       using 'VBAK-VSBED'
                                  '01'.
    perform bdc_field       using 'VBKD-KZAZU'
                                  'X'.
    perform bdc_field       using 'VBKD-VSART'
                                  'ER'.
    perform bdc_dynpro      using 'SAPMV45A' '4002'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=T\05'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'VBKD-INCO2'.
    perform bdc_field       using 'VBKD-INCO1'
                                  'EXW'.
    perform bdc_field       using 'VBKD-INCO2'
                                  'mumbai'.
    perform bdc_field       using 'VBKD-ZTERM'
                                  '0001'.
    perform bdc_field       using 'VBKD-FKDAT'
                                  '29.01.2008'.
    perform bdc_field       using 'VBAK-TAXK1'
                                  '1'.
    perform bdc_field       using 'VBAK-TAXK3'
                                  'l'.
    perform bdc_dynpro      using 'SAPMV45A' '4002'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=T\09'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'VBKD-ZLSCH'.
    perform bdc_field       using 'VBKD-KTGRD'
                                  '01'.
    perform bdc_field       using 'VBKD-ZLSCH'
                                  'c'.
    perform bdc_dynpro      using 'SAPMV45A' '4002'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=TP_DELETE'.
    perform bdc_field       using 'LV70T-SPRAS'
                                  'EN'.
    perform bdc_dynpro      using 'SAPMV45A' '4002'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=TP_CREATE'.
    perform bdc_field       using 'LV70T-SPRAS'
                                  'EN'.
    perform bdc_dynpro      using 'SAPMV45A' '4002'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=TP_DETAIL'.
    perform bdc_field       using 'LV70T-SPRAS'
                                  'EN'.
    perform bdc_dynpro      using 'SAPLSTXX' '1100'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'RSTXT-TXLINE(02)'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=TXVB'.
    perform bdc_field       using 'RSTXT-TXLINE(02)'
                                  'BDFBFDB'.
    perform bdc_dynpro      using 'SAPLSTXX' '1100'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'RSTXT-TXLINE(02)'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=TXBA'.
    perform bdc_dynpro      using 'SAPMV45A' '4002'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=T\11'.
    perform bdc_dynpro      using 'SAPMV45A' '4002'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=KSTC'.
    perform bdc_dynpro      using 'SAPLBSVA' '0300'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '/00'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'J_STMAINT-ANWS(02)'.
    perform bdc_field       using 'J_STMAINT-ANWS(01)'
    perform bdc_field       using 'J_STMAINT-ANWS(02)'
                                  'X'.
    perform bdc_dynpro      using 'SAPLBSVA' '0300'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '/00'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'J_STMAINT-ANWS(03)'.
    perform bdc_field       using 'J_STMAINT-ANWS(02)'
    perform bdc_field       using 'J_STMAINT-ANWS(03)'
                                  'X'.
    perform bdc_dynpro      using 'SAPLBSVA' '0300'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '/00'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'J_STMAINT-ANWS(04)'.
    perform bdc_field       using 'J_STMAINT-ANWS(03)'
    perform bdc_field       using 'J_STMAINT-ANWS(04)'
                                  'X'.
    perform bdc_dynpro      using 'SAPLBSVA' '0300'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=BACK'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'JOSTD-OBJNR'.
    perform bdc_dynpro      using 'SAPMV45A' '4002'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '/EBACK'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'RV45A-TXT_VBELN'.
    perform bdc_dynpro      using 'SAPMV45A' '4001'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=SICH'.
    perform bdc_field       using 'VBKD-BSTKD'
                                  'open SO'.
    perform bdc_field       using 'VBKD-BSTDK'
                                  '29.01.2008'.
    perform bdc_field       using 'KUAGV-KUNNR'
                                  '100000'.
    perform bdc_field       using 'KUWEV-KUNNR'
                                  '100000'.
    perform bdc_field       using 'RV45A-KETDAT'
                                  '29.01.2008'.
    perform bdc_field       using 'RV45A-KPRGBZ'
                                  'D'.
    perform bdc_field       using 'VBKD-PRSDT'
                                  '29.01.2008'.
    perform bdc_field       using 'VBKD-INCO1'
                                  'EXW'.
    perform bdc_field       using 'VBKD-INCO2'
                                  'mumbai'.
    perform bdc_field       using 'VBKD-ZTERM'
                                  '0001'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'RV45A-MABNR(01)'.
    perform bdc_transaction using 'VA01'.
    perform close_group.
    if in excel file one row of records means i am succesfully creating SO.
    But for multiple i am not getting idea to create SO.
    My excel file details like this.In this excel file based on VBKD-BSTKD_E value i have to keep the records in line items.
    VBAK-AUART    :Order Type
    VBAK-VKORG    : Sales Org
    VBAK-VTWEG    : Distri Channel
    VBAK-SPART    : Division
    VBAK-KUNNR    : Sold-to-Party
    VBPA-KUNNAR   : Ship-to-Party
    VBAK-BSTNK    : PO No
    VBAK-BSTDK    : PO Date
    VBAP-MATNR    : Material No
    A_THICK_MM
    A_WIDTH_MM
    A_EQUIVALENT_SPEC
    A_COIL_INNER_DIA_MM
    A_BATCH_WEIGHT_MIN_SI
    A_BATCH_WEIGHT_MAX_SI
    VBAP-KWMENG    : Qty
    VBAP-WERKS     : Delivery Plant
    VBKD-INCO2     : Incoterm2
    VBKD-KONDA     : Price Group
    VBKD-VSART     : Shipping Type
    VBAK-TAXK1     : Cust Tax-1
    VBAK-TAXK2     : Cust Tax-2
    VBAK-TAXK3     : Cust Tax-3
    VBAK-TAXK4     : Cust Tax-4
    VBKD-ZLSCH     : Payment Method
    VBAP-TAXM1     : Mat tax clss-1
    VBAP-TAXM2     : Mat tax clss-2
    VBAP-TAXM3     : Mat tax clss-3
    VBAP-TAXM4     : Mat tax clss-4
    VBAP-POSEX     : IMPS Order No
    VBKD-BSTKD_E   : old SO in 4.6c
    VBKD-POSEX_E   : old SO Item  in 4.6c
    Text Id        : TDC No
    Text Id-ES10   : Special Inst(Unld const & Veh)
    ZOR,2000,10,5,100000,100000,PO NO 125,19.01.2008,HRPOCF,3.1,1200,IS_11513_GR_D_1985,610,20.084,20.084
    51,2010,Mumbai,01Freight-pre paid,ER,2,0,L,0,c,1,1,0,0,108128,3011192,     1,PO 444 AMD 1,Spl Inst
    based on VBKD-BSTKD_E line items has to create.
    if VBKD-BSTKD_E = 3011192 is like 4 records in excel means for these 4 should be one SO
    if it is changed to 3011193 then only different SO.
    PLs If any one knows solution pls write some sample code for me.
    If u send that code to my mail id also  very thankful.
    Pls help me this is urgent requirement.
    [email protected]
    Thanks & Regards,
    J.Lokesh

    If u want to add Items data, u have to handle the Table control by writing the complete code.
    U have to write code for 2 items, when u press enter u will get new row to enter new record one by one.
    Narendra

  • Multiple Service Entry Sheet For PO Line Items and One GR Document

    Dear All,
    We have just migrated from ECC 5.0 System to ECC 6.0 System. We are facing a problem while processing service entry sheets and the GR against them. The scenario is:
    1. We create a maintenance plan
    2. Upon saving the Maintenance Plan, a Purchase Requisition (PR) is generated
    3. The PR's are combined into one Purchase Order
    4. Against the Purchase Orders, multiple service entry sheets are created
    In ECC 5.0 System, we used to accept the service entry sheets and only one material document used to get generated as GR document. But now in ECC 6.0, we observe that with the same configuration, individual material documents are getting generated for individual service entry sheets. Is there a configuration in ECC 5.0, that enables clubbing of service entry sheet items in one GR document?
    Your help will be sincerely appreciated.
    Thanks and Sincere Regards,
    Amitabha

    Hi,
    If this can be of help I can report the list of the programs that                    
    are executed:                                                                               
    Before the popup "FUNCTION POPUP_TO_CONFIRM_STEP" appeares in ML81N,                          
    following programs are executed:                                                                               
    5  FUNCTION POPUP_TO_CONFIRM_STEP SAPLSPO1                                           
    4  FORM SELECTION_CHANGED_PO SAPLMLSR                                                
    3  FORM FCODE_SEL_PO SAPLMLSR                                                        
    2  FORM FCODE SAPLMLSR                                                               
    1  MODULE (PAI) FCODE SAPLMLSR                                                                               
    Unfortunately at this time it is not planned to change the current                   
    functionality.
    Regards,
    Edit

  • How can I create a search plugin for multiple fields

    There are a number of sites that have search capabilities but they require entries into multiple fields.
    One such site is for instance the IBM Employee directory.
    (http://www.ibm.com/contact/employees/servlets/lookup)
    On this site - in order to get usable results - I have to enter both First name and Last name of the employee I'm looking for.
    I created a search plugin for the site, however I wasn't able to split the entered text into two parts and provide them as separate fields for the form.
    Is there a way to do this?
    Regards,
    Imre

    Hi,
    This is excellent. Not search-plugin though but but this is as good as a search-plugin. (Even better, as I haven't seen any solution with the plugins for the problem.)
    I didn't know that it was possible to use javascript as bookmark location.
    Thanks,
    Imre

  • How to create one inbound delivery for multiple purchase order?

    Hi Experts,
    Please let me know how can I create one inbound delivery for multiple purchasing documents(PO or SA)? 
    Is there a configuration needed for this?  If yes, please let me know the configuration to make this happen.
    Appreciate your help on this.  Right answers will be rewarded.
    Thank you.
    with regards,
    Muthu Ganapathy.

    Hi,
    my situation is:
    - a WM managed warehouse, society A;
    - a HU managed warehouse (without WM), society B;
    - a purchasing process of HU from society A towards society B.
    Society B have a scheduling agreement; when a delivery schedule appears, in society A born a sales order and a delivery. After the registration of the delivery good issue, an idoc transfer information for inbound delivery creation.
    This process is ok without WM, but with a WM managed warehouse the idoc has the following problem:
    "V51VP - item was not found - process cancelled".
    Can you help me to transfer these HU?

  • How can I create a second sheet within a tab?

    How can I create a second sheet within a tab? I have tried to add another table but it shows up on top of the existing table. I want to have two sheets or tables within one tab so I can further sort and categorize within a section. Is this possible? Thanks for all the help!
    -Bridget Altman
    Administrative Associate
    Discover Abroad at the University of Georgia

    You can insert a new table on the View Responses Tab with
    Insert > Table
    You can also insert a new sheet with a new table with
    Insert > Sheet
    You can drag and drop the table if it does overlap with another table. Just select the table you want to move and drag the top-left corner of the table to move it.
    Hope this helps
    Gen

  • HT5622 How can I create an Apple ID for my child without linking it to a credit card?

    How can I create an Apple ID for my child without linking it to a credit card?

    Hi Kappy..
    that did use to be the case but ios 8 you can create a child's Apple ID which will stay linked to the main Apple ID until they are 13 when they can if you wish take over the Apple ID themselves.
    I Have the same question regarding creating an Apple ID for my son but it insists I have to add a credit card to prove I'm an adult.
    thing is I don't have another card to add to my Apple ID I have been using the same card for all my family's Apple purchases i just update my details when I get issued a new one.
    Any ideas or suggestions greatly accepted.
    cheers

  • How can I create an apple ID for Free?

    How can I create an apple ID for Free?

    You can create an iTune and App Store account without credit card details
    1. Sign out of current Apple ID if you are sign-in to one (important)
    2. Go to App Store and select a free app
    3. Tap INSTALL APP
    4. Create New Apple ID
    5. Confirm Your Country
    6. Agree with Terms and Conditions
    7. Fill in your Apple ID and Password (you must create a new Apple ID; don't use your old Apple ID)
    8. Create and answer your secret question
    9. Select NONE for Payment Method
    10. Fill in Billing Address
    11. Submit application for new Apple ID
    12. Wait for verification email
    13. When email arrive, verify your account
    14. Start downloading your free apps

  • How can I create a Forms9i Runtime for client distribution

    Currently we have an application developed in Forms 5.0.6.8.0 our Database has been upgraded to 9i DB. The application is working fine with this combination but we want to upgrade Forms in order to get Oracle Support. We just get the Developer Suite 9i package and we're trying to test our application with this software.
    How can I create the client runtime for Forms 9i?
    My application will work with Win 95 and 98?
    Thanks.

    Oracle9i Forms is web-only. Forms 6i is the last release of Forms to have client/server and character mode.
    You can test Forms from the Builder by installing iDS. To deploy Forms using iAS follow the documentation. It's all there in the deployment guide.
    iAS and Forms doco can be found on OTN.
    Regards,
    Robin Zimmermann
    Forms Product Management

  • HT201209 How can I create an apple ID for my daughter, without adding a credit card to the account?

    How can I create an apple ID for my daughter, without adding a credit card to the account? I have tried to purchase a gift card online, but it just credits it to my account; I cannot use it to credit her new account therefore I cannot create that account.

    There are intructions on this page for how to create a new account without giving credit card details : http://support.apple.com/kb/HT2534
    e.g. log out of your account, find a free a free app in the store, click on its free 'price' :
    click on 'create Apple id' on the popup :
    Agree to the terms and fill in the details, and you should get 'none' on the payments screen.

  • HT1660 how can I use one single library for all users on the same laptop?

    how can I use one single library for all users on the same laptop?

    You are most of the way there. Each user having access to hard drive is the key. If users are limited in file privileges this is harder.
    Any files you add to your library and any files she adds to her library are available to the other. Just not automatically. Each user must add the files to their own library using the add file or add folder option from menu bar.
    What I have done is set library location to a location outside of My Documents\My Music. On my network storage I have a folder names s:\itunes. Both accounts iTunes are set to use this location for the library.

  • How can i create another apple id for my other iphone?

    how can i create another apple id for my other iphone? my wife is using the other iphone and we dont want to share contacts and downloads.

    Go to this page to create another Apple ID. You'll need to have another email address to do it.
    Best of luck.

  • Error: while creating Service Entry Sheet - for HELD PO

    Hi experts,
    While PO XXXXXXXXXX is in the status of Hold. System allowed me to create & delete a service entry sheet(SES) on particular date.
    Another day i tried to create SES for the same PO. System is not allowing me to create SES and it gives me error as  'Purchase order XXXXXXXXXX incomplete (parked)'.
    While debugging I found that ekko-memory field set to 'X'. At this point I am getting error.
    My question is why the system is allowed me to create SES for a PO which is in HELD status?.
    Please help me.
    Thanks In advance,
    Vinod

    Thanks for the reply.
    We are aware that system will not allow to create Service entry sheet for held po. But it is allowed me to create on a particular date. Another day i tried to create/delete a SES for the same PO or new PO(held status)  system is not allowing me to delete/create SES.
    Please help me what might be the reason which allowed me on a particulare date.
    Thanks in Advance,
    Vinod....

Maybe you are looking for

  • Has ANYONE heard from apple on the 7.1.6 bug???

    I KNOW there's been a lot of emails sent, but has anyone heard back from apple? I want to know what the **** they're doing about it.. Dual 2.0 G5   Mac OS X (10.4.9)  

  • Nike+ is no longer discoverable by my iPhone.

    *I received the Nike+ as a Christmas gift. I've used it about fifteen times since 12/25. Yesterday, it was not discoverable by my iPhone. I walked and walked, but the phone didn't find it.* I've found the whole Nike+ maddeningly great/terrible. The w

  • Using stored procedures within Crystal Reports

    Hello all, Background Information: I am trying to teach myself how to execute a stored procedure within Crystal Reports.  This is an aspect of Crystal that my work group has not utilized before and we're trying to gather information on the subject. 

  • Lost money in my app account

    There  are several of us missing money in our app accounts. We put I gift cards and go to use them and it says there is not eough money in the account. We check if the gift card worked. And that was not the problem.  There is a problem. I am the only

  • I chose wrong (single ap) plan. How do I switch to correct plan (student)?

    Hello all, Thank you in advance for your help.  I am a student at a community college.  A little over a year ago, as part of our curriculum, we had to sign up for the creative cloud.  We were told it was around $20 a month, so I accidentally chose th