How can I display step info in User Interface with Tracing Disabled?

I'm trying to modify the CVI Operator Interface application to update the execute panel with some step information during the execution of the program. i.e. I want to display the measurement, high & low limits during the run WHEN TRACING IS DISABLED. (Doing this, when tracing is enabled is easy, all you do is access the step record that's been constructed (I can cope with that!))
I've successfully implemented a User defined execution event to signal the User Interface application when the current step is a result (using TS_UIMsg_UserMessageBase etc. I'm posting a UI Message in the Process Model under the ProcessModelPostStep so that I will only display if its a result step.) I've added a user defined
entry in the execute.c module execution event switch statement which will call a function in the exedisp.c module to update the display. However, I don't have a context to the step that I can use. (I can't use e.g. the exeRec record since this is only completed with the context if tracing is enabled.) I've got a handle to the correct panel to write the information to, but how do I get the context to the current step when tracing is disabled?
Regards,
Brian

Hi,
no problem - btw, if you wanted to acheive this in TS 1.x, you could always write to a local variable with the ActiveX reference for the step concerned, and then use the msg reference that you have in the OI within the UI Message handler, to dig through to the Execution ->Sequence File->Sequence->Locals, or Execution->Thread->SequenceContext (and you can get almost anywhere from that).
Hope that helps
S.
// it takes almost no time to rate an answer

Similar Messages

Is anyone know how to run the examples in 3d user interfaces with java 3d

hi dear ,
I am trying to run the examples in 3d user interfaces with java 3d.
I hope i can load the library in jcreator. but the libarary for this book are classes files , it do not have jar file for it . the jcreator do not read these classes . i do not know why ? i am wonder if there any one run these code before can give me some idear .
thanks so much .
the code u can get from this link.
http://www.manning.com/books/barrilleaux/source
thank you for u to have a look for me .
regards
xiaocui

<h2>{color:red}CROSS POSTED{color}</h2>
[t-5289810]
Cross posting is rude.
db

I have a new ipod and when I sign in to Words with Friends it says that user name is already in use. How can I continue using the same user name with a different ipod?

I have a new ipod and added all my apps to it. When I sign in to Words with Friends it says that "user name is already in use" because it is linked to my old ipod. How can I use the same user name with my new ipod?

Was the iPod setup via iTunes on this computer?
Setup via wifi?
Was the iPod previous synced to another iTunes library/computer?
Have you successfully synced from this iTunes library/computer before?
Do the songs play in iTunes?
Do you have the right boxes checked to sync?
iTunes: Syncing media content to iOS devices and iPod
Try syncing using the manual method

New iMac 21.5". How can I set up a new user account with access to all the files of the original user account?

Running Mavericks on a 2013 iMac 21.5". I want to set up a second user account with different settings that meet the requirements of specific software. I need the files to be accessible by both users. I have made both the main and secondary accounts administrators. I have also enabled file sharing for both. Neither account can see the other's files in Finder.
How can I make all files accessible to both accounts? I read that administrator accounts automatically can see all files on the computer, but it is not working out that way. I have restarted the computer, to no avail.

Comcast only offers POP accounts, and one way to set up the account and enter all the settings before it connects to the mail server, might be to do it Offline:
https://support.mozilla.org/en-US/questions/991539#answer-547878
The server settings are given [http://customer.comcast.com/help-and-support/internet/setting-up-thunderbird/ here], but the method is for Online account setup.

How can i sync the info in my android with my mac book

How can i transfer or sync the info in my android with my macbook?
thanks

There are a number of software packages out there for syncing an android based phone with a Mac. I did a google search for "Android sync Mac" and came up with more than I could look at on one page.
Best of luck.

How can i display warning messages in user exit EXIT_SAPLMGMU_001 (MM02)

Hi all,
while modifying the material master using MM02, i have added new conditions to display messages in user exit EXIT_SPALMGMU_001.
But using this user exit i am not able to display warning messages.
Can you please help me with this?
Sample code which i have included in exit :
SELECT SINGLE mstav FROM mara
INTO w_mstav
WHERE matnr = wmara-matnr.
IF wmara-mstav NE w_mstav.
IF wmara-mstdv NE sy-datum.
wmara-mstdv = sy-datum.
MESSAGE w177(z03_mm) WITH text-s04 text-s21.
ENDIF.
ENDIF.
Thank you all in advance.

As written in the SAP documentation of the Enhancement , you can only raise error message using a
MESSAGE .. RAISING APPLICATION_ERROR.
You could manage the "warning" yourself, sending an error first time and keeping a trace of the check in some STATICS variable, and not raising the error again if data input remains unchanged between two call of the include.
<i>----
EXIT_SAPLMGMU_001
Where Is the Customer Exit - EXIT_SAPLMGMU_001 called?
The customer exit is in function module MATERIAL_UPDATE_ALL. The
function module checks the data for errors (logical relationships,
foreign keys, fixed domain values, and so on) when the material master
is updated.
Use
o New fields
You can make checks possible for new fields of your own. These
checks must be identical to the checks that you carry out for your
new fields in online maintenance.
o Existing fields
For existing fields, you can extend and intensify the checks.
You can also change data for descriptions and general material data
(MARA). For example, the descriptions can be generated from attributes
of the material.
Limitations
You cannot bypass existing checks.
Interface to Application
The respective data of the current logical transaction is contained in
the structures, for example, in structure WMARA for MARA. Nonrelevant
structures are transferred with their initial values.
General material data that can be changed (CMARA) has the structure
MARU. This MARA view contains fewer internal fields than MARA itself. If
WMARA is filled, CMARA is also filled when accessed.
The customer exit contains the exception APPLICATION_ERROR for your
self-defined error situations.
Using the language element MESSAGE .. RAISING APPLICATION_ERROR, you can
terminate the current (logical) transaction and display your message in
the log. </i>
Regards

How can I display more info using remote app?

Hi there,
I use remote app a lot, but I find it quite basic in the display features.
I mean: remote is great to browse my music library and play songs with on my living room hi-fi while I'm sitting comfortable on my sofa.
But what if I would like to know the release date of the album, the name of the composer, and so on?
Is there any way to configure the remote app to display more?
Is any kind of new release of the app on its way?
Thank you.

Command (right) - click on a photo in the Photo tray and select Small Photo from the contextual menu:
This will give you two columns of photos.
To reduce the number of photos to select from one can select only Unplaced Photos to be displayed in the tray.
Happy Holidays

How can I display contacts in a relationship

I have companies in my CRM. I have a customers/contacts in the CRM I have tied as a relationship with each companies. How can I display all the records/contacts associated with a company? I have a already created a secure zone, so the company user would have logged in. Is this possible? If not, any workaround?
The only workaround I thought of is to use webapp to import the company data and create another web app containing the employees data. Then link both tables/webapp using datasource. But the way the client's data is structured could create a lot of problems going forward.
Any suggestion, help will be appreciated

The relationship feature and how companies work currently in BC is really limited. It is an association and not true relationships at the moment. You cant output a company and show all its relationships at the moment.

How can i display my iviews in anonymous page

hi experts,
I have created some iviews and I have created a role for all these i views and assigned this role to anonymous user group.
when i access the anonymous page,i get the info"contents not exsits or not enabled",well how can i display my iviews in anonymous page
best regards,
zlf

This page may help
http://help.sap.com/saphelp_nw04s/helpdata/en/1e/e19f58136e654d9709befa464314f2/content.htm

How can I display special characters of NonEuropean languages (French, Italian, Spanish, German and Portuguese.) using import string mechanism

I would like to translate the User Interface of my application to French, Italian, Spanish, German and Portuguese.
When I put special characters in the import string file they showed up as ? (question mark)
The import strings file includes the following parameters for each string: font, text, size and style. (but no field for script)
In order to use a unicode font such as Arial I need to select a french script. But this option is not supported bu LabView (As far as I saw)
A) Is there a font which is directly German/ French etc and not regula font + script parameter?
B) Are there another required step
s for special characters support? (When I put speciual characters in the import string file the showed up as ? question mark)

This was discussed last week in this group- read the previous messages.
Look for the thread "Foreign Languages in Labview"
And recite the mantra
ActiveX is good
ActiveX is holy
All Hail Bill
Those who claim otherwise are heretics and not to be trusted
Actually, in this case the non-ActiveX suggestions may be good.
talia wrote in message
news:[email protected]..
> How can I display special characters of NonEuropean languages (French,
> Italian, Spanish, German and Portuguese.) using import string
> mechanism

How can I display XSLT transformer errors on a web page ?

Hi,
I have some JSP pages that access DB, create an XML based on DB data and then transform it into HTML through an XSLT stylesheet. Developing the XSL code it's easy to make mistakes and generate errors on trasformation, but what I receive on the web page is only a "Could not compile stylesheet" TransformerConfigurationException, while the real cause of the error is displayed only on tomcat logs. This is the code for transformation:
static public void applyXSLT(Document docXML, InputStream isXSL, PrintWriter pw) throws TransformerException, Exception {
        // instantiate the TransformerFactory.
        TransformerFactory tFactory = TransformerFactory.newInstance();
        // creates an error listener
        XslErrorListener xel = new XslErrorListener();
        // sets the error listener for the factory
        tFactory.setErrorListener(xel);
        // generate the transformer
        Transformer transformer = tFactory.newTransformer(new SAXSource(new InputSource(isXSL)));
        // transforms the XML Source and sends the output to the HTTP response
        transformer.transform(new DOMSource(docXML), new StreamResult(pw));
}If an exception is thrown during the execution of this code, its error message is displayed on the web page.
This is the listener class:
public class XslErrorListener implements ErrorListener {
    public XslErrorListener() {
    public void warning(TransformerException ex) {
        // logs on error log
        System.err.println("\n\nWarning on XEL: " + ex.getMessage());
    public void error(TransformerException ex) throws TransformerException {
        // logs on error log
        System.err.println("\n\nError on XEL: " + ex.getMessage());
        // and throws it
        throw ex;
    public void fatalError(TransformerException ex) throws TransformerException {
        // logs on error log
        System.err.println("\n\nFatal Error on XEL: " + ex.getMessage());
        // and throws it
        throw ex;
}When I have an error in the XSL stylesheet (for examples a missing closing tag), I can find on tomcat logs the real cause of the error:
[Fatal Error] :59:10: The element type "table" must be terminated by the matching end-tag "</table>".
Error on XEL: The element type "table" must be terminated by the matching end-tag "</table>".but on my web page is reported just the TransformerConfigurationException message that is:
"Could not compile stylesheet".
How can I display the real cause of the error directly on the web page?
Thanks,
Andrea

This code is part of a bigger project that let developers edit XSL stylesheets through a file upload on the system and we can't impose the use of any tool for checking the xsl. So, I need to display the transformer error on the web page.I see. This code is part of an editorial/developmental tool for developers to create and edit XSL stylesheets.
As part of the editorial process, XSL errors during editing can be considered a normal condition. In other words, it is normal to expect that the developers will generate XSL errors as they are developing stylesheets.
In this light, handling the XSL transformation errors is a business requirement that you need to handle. Using the Java Exceptions mechanisms, e.g. try / catch are inappropriate to handle business requirements, in my opinion.
I suggest that you look at how you handle the occurence of XSL errors differently than what you currently have. You need to:
(1) capture the Transformation exception on the server;
(2) extract the message from the exception and put it into a message that can be easily understood by the user;
The current error message that you have going to the web browser is not useful.
And you should not have the Transformation exception sent to the web browser either.
What you are attempting to do with the exception is not appropriate.
Handle the Transformation exception on the Business tier and use it to create a useful message that is then sent to the Presentation tier. In other words, do not send Java exceptions to web browser.
/>

How can I display True/False in my dropdownlist as "Yes" and "No"?

Hi All,
I want to bind a dropdownlist to a boolean value (so it's either true or false). I'm particularly interested in using two-way binding to when the user changes from "yes" to "no" the boolean value automatically changes from "true" to "false." But, I want the user to see "yes" and "no" as the options, rather than "true" and "false".
How can I display "yes" and "no" and still take advantage of binding? Or can I not use binding in this circumstance?
-Josh

Solution 1:
In order to display Yes/No for True/False, you may specify labelFunction for the dropdownList.
In MXML:
<s:DropDownList labelFunction="myLabelFunction" />
In actionscript:
private var arr:ArrayCollection = new ArrayCollection(["true","false"]);
            private function mylabelFunction(item:Object):String
                if(item.toString() == "true")
                    return "yes";
                else return "No";
OR
Solution2:
may be u can try making an array collection like
private var arr:ArrayCollection = new ArrayCollection([{label:"yes",value:"true"},{label:"no",value:"false"}]);
and specify labelField for the dropdownList like
<s:DropDownList labelField="label" dataProvider="{arr}" />

How can i display a list of all the names stored in the Mail app?

When sending an email, the program shows a list of names according to the first and subsequent letters that I type into the To: field. There are times I cannot recall someone's email user name. How can I display a complete list of all the names Mail has stored? I know that I can go to the To: field then type in the letter A, then write down all listings under A, and then repeat for each letter of the alphabet, but there should be an easier method.
I have perhaps dozens of names in Mail, but only five names in Address Book, so the latter does me no good.

On the menubar, Mail > Window > Previous Recipients
Regards,
Captfred

How can i display a portlet in the Edit view only ?

Dear All,
I'm developing a portal in which the end user can change the content of the portal page (personalize) using Edit smart link and i ask How can i display a portlet in the Edit view only ? not shown in the production view ?

Last time I heard with Oracle they said the only way is to look at the current URL. If it contais _mode=16 then we are in edit mode.
This is a function I use:
FUNCTION inEditMode return boolean is
bEdit boolean := false;
begin
if PORTAL.wwpro_api_parameters.get_value('_mode', 'qaz') = '16' then
bEdit := true;
end if;
return bEdit;
end inEditMode;
Kind regards
Tomas Albinsson
Stockholm, Sweden

How can I display a changing variable in a subvi on the front panel of the main vi as the subvi is excuting

In the document attached the vi on the right is sub to the vi on the left. On the subvi on the right the variable "Field Reading" is continuously updated on the front panel of the subvi as the "for" loop is executed, but only the last value of the variable is updated on the main vi front panel which is what is expected. My question is how can I display the changing value of "Field Reading" on the main vi front panel as the "for" loop in the subvi is running?
Thank you.
Solved!
Go to Solution.
Attachments:
Doc2.docx ‏554 KB

Hopefully I can explain it well enough. It really is simple.
1) Create an empty global variable and call it something like User Interface References.vi
2) For each and every control and indicator on your front panel, right-click and select Create/Reference
3) Place these references wherever you like (I use a series of Event cases to perform my initialisation and these all live in one of these event cases). They can be placed anywhere in the main vi.
4) For each of the references, right-click and select Create/Indicator
5) Moving to the front panel, Cut all the indicators and Paste them in the global variable (eg. User Interface References.vi)
6) Moving back to the block diagram, wire the global variable to each of the references and select the same named global variable.
All the hard work is now done (until you add another user interface terminal). You should now have something that look as shown below, [except the reference labels would be to the left (not sure why the snippet put them above)]. In my latest program I have 82 references!
Done. You can now access all your front panel controls and indicators anywhere in your program as shown below.
You can just select Value in most cases, but in this particular case I wanted to fire off an Event to do some things (log the alarm) as well as just update the value. So, this is another bonus with the method.
Hopefully this all makes sense. If not, let me know.

How can I display step info in User Interface with Tracing Disabled?

Similar Messages

Maybe you are looking for