How can I extend the range of my WESTELL 7500? Please help.

I installed a security camera outsite of my house and unfortunately the modem/router is on the opposite end. The camera would connect on and off as opposed to on all the time when it was mounted inside.
I am researching around and it looks like I can get an extender? Are there certain ones to look for in terms of compatibility issues?
Or can I upgrade the modem/router? The Westell 7500 was provided by Verizon at start of service.
Thanks in advance.

If you want a wireless extender, it must support 802.11b and 802.11g.
If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

Similar Messages

I get a neighbor's wifi on my MacBook in my bedroom. How can I extend the range to the MacMini in my living room?

I get a neighbor's wifi on my MacBook in my bedroom. How can I extend the range to the MacMini in my living room?

You can't. It's not your network.

How can I extend the range of my chart?

I've asked this question before on here, and found that shift-clicking for more cells has usually worked, but I have now run into a new problem...
My chart used to cover the range B5:P50. However, since moving a column it now only covers the cell range H5:P50. My chart is on a separate sheet. Usually if I want to add more to the range it will be downwards, so I just click on the chart, then click on the Main Sheet and shift-click to add more cells. Unfortunately, because the range I want is to the left of the highlighted area this time, I can't use shift-click.
How can I extend the range of my chart so it includes cells to the left of the currently selected range? In Excel I'd be able to just type the range in a box somewhere, rather than all this GUI-based clicking and dragging which is actually more difficult! Is there somewhere I can just type the range in that I want?
Thanks!

"I want to add some series that are missing from the chart. How do I do that?"
Here's a two step process to do that:
Select the chart to show the the data selection on the associated chart.
Click in the leftmost column of the data, and drag left to change (move) the selection (blue arrow) for the result below:
Grab the control handle (small circle) at the bottom right corner of the selection, and drag right, as indicated by the blue arrow.
Result shown below.
Reassign colours and do other formatting as desired.
Regards,
Barry

How can I adjust the length of a note? Please help.

How can I adjust the length (the sustain time) of a note after I have selected the note? Many thanks.

Just drag the right end back and forth (mouse over the end of the note - a ] appears) - by holding down ctrlshiftdragging you can change the subdivision into ticks. In the Midi event editor you can do it numerically - just change the numbers displayed in the length section.

URGENT!! How can I change the key of a song? Please help

I have written a song in C major but I wanna change it to D major in order to match my vocal range better, how can I do that? I used garageband before and I just have to adjust the key and then it will change the frequency of the song automatically and hence the key of the song. How does it work in Logic? Many thanks.

Hold down CMD (apple key) - A (to select all).
If it's easier and you only want to select say all regions on one track, click on the track header to select all regions on that track.
Now, if you want to select all the regions on two or more tracks:
1. Click on the track header
2. Shift click on another track header
By the way, turn off the cycle area before doing this, as otherwise only regions within the cycle area will be selected.
Cheers
Rounik

How Can I Change the Language of my Itunes? PLEASE HELP!

Alright, I'm in a bit of a dillemna here. My itunes is in Korean, but I can't read the language at all. I don't know what buttons to press to change it to English.
If someone could tell me exactly what buttons to click, it would help SO MUCH.
(For example, "go to files and click the third button down")

Ok press Ctrl+ that gets u into prefrences then the last topic or the one above the ok and cancel is the languages hope this helps

How can I uninstall the ios 7.1 update? Please help. I hate it

Please help... I want to uninstall the ios 7.1

When battery isues exist, it's almost always the way we use the software.
Have you tried the things recommended here: http://www.apple.com/batteries/iphone.html
Pay special attention to the Wi-Fi vs Celluar thing. And the background app refresh. And location services.
Also, try a reset of your network settings in Settings > General > Reset > Reset Network Settings. Reconnect to your Wi-Fi network and go from there.
Instead of blaming the software, it's wisest to work on the issues that present themselves.
And killhippie is 60000% correct. Downgrading is very, very not good. Luckly, Apple doesn't support that.

How can I extend the range of an Extreme network with Express when my mac won't find the Express???

Cable modem. Properly working Apt Extreme router (g), but inadequate range to upstairs home office. I want to entend with an Apt Express and have a networked USB printer working off the Express unit placed in my office. Mac mini running Lion can't/won't find the Express.
Can you help me? Thanks in advance.
SULLOQUY

If you were able to access the AX using the AirPort Utility but your PC is still not able to connect. I would try performing a "factory default" reset on the AX to see if that helps before going to the store. This type of reset will put the AX back to its "out-of-the-box" configuration which would broadcast an unsecured wireless network with a network name of something like: Apple Network NNNNNN. If your PC still cannot "see" or connect to this network, then a visit to the store would be in order.

How can I extend the range of a WRT54GX4 V1 or replace it with something with a larger range?

I have a WRT54GX4 that acts as a wireless router for several PCs and a couple of Tivos. The Tivos are using the Tivo branded USB wireless-g adaptors. One of them appears to be at the outer limit of the WRT54G4 due to the presence of a number of nearby networks and wireless phones and keeps losing it's connection to the WRT54GX4.
I looked at the WRE54G but the latest version -- with the RJ45 port -- is not listed as being comptible with the WRT54GX4.
Do any of the other wireless routers have a stronger signal than the WRT54GX4? I don't need SRS as the Tivos don't support it and neither do the notebooks' built in adaptors.

There are many routers that are capable of giving a stronger or better signal than the WRT54GX4 router...
Example : WRT310N, WRT320N, WRT350N, WRT400N, WRT600N, WRT610N...

My computer died. I do not want to loose one video on my iPod, how can I use the iPod on another computer? Please help!

please advise how I can put my iPod on another computer, my old one died a slow death. There is one short video on my iPod that can't be replaced.

- What is the source of the videos? If taken by the iPod you can transfer them to the new computer by:
Copying personal photos and videos from iPhone, iPad, or iPod touch to your computer
- If they were iTunes purchases by:
iTunes Store: Transferring purchases from your iPhone, iPad, or iPod to a computer
- If they were synced to the iPod and not iTunes purchases then you need a third-party program like TouchCopy or PhoneView.

How can i fill the JTree form database?? please help

Dear all
my database is MS Access
I have two tables
-Countries table contain country_id and country_desc
- cities table contain city_id,city_desc,country_id
i need to make a tree with countries and cities
my class as follow:
public class SystemFrame extends JFrame {
private JPanel panelCenter = new JPanel();
private JLabel statusBar = new JLabel();
private JTree systemTree = new JTree();
// constructor
public SystemFrame() {
try {
jbInit();
} catch (Exception e) {
e.printStackTrace();
private void jbInit() throws Exception {
this.getContentPane().setLayout( layoutMain );
panelCenter.setLayout( null );
this.setSize( new Dimension(400, 300) );
this.setTitle( "Country Menu" );
statusBar.setText( "staus bar" );
systemTree.setAutoscrolls(true);
systemTree.setBorder(BorderFactory.createTitledBorder("Country Menue"));
systemTree.setForeground(Color.red);
systemTree.setToolTipText("Select desired city");
this.getContentPane().add( statusBar, BorderLayout.SOUTH );
this.getContentPane().add( panelCenter, BorderLayout.NORTH);
this.getContentPane().add(systemTree, BorderLayout.CENTER);
this.setVisible(true);
public static void main(String args[]) {
SystemFrame frm = new SystemFrame() ;
i need to fill my JTree with data in tables. I do not know how
Please help

You need to implement a tree model to describe your data structure.
Start from reading the java doc about javax.swing.tree.TreeModel

How can I extend the wireless range on my BT Hub 3

I currently have the BT hub 3 and find that as I have quite a rambling house and the broadband is located at one side rather than in the middle of the house I cannot get a signal in all areas. This is massively frustration for the children when they wish to do their homework in the peace of their own rooms - how can I extend the range, without having to pay through the nose, but easy enough for someone who is not massively technical? - Thanks in advance

There are a number of options on my website.
Wireless connection problems
and
Network connection problems and possible solutions
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

Can somebody help how can I extend the carpet sample to fill out the hallway?

I would need to extend the piece of capret sample to replace the old plane carpet. I'm pretty new to PS and have trouble with the crazy carpet patter plus the room is getting narrower.
Can somebody give me some tips or any kind of help? I really appreciate it. Thank you!

Ok, the question is how can i extend the range with
my airport extreme base,
With an Airport Express or another Airport Extreme
I have A netgear WNP802, it
has a repeating feature.
Which won't work with your Airport Extreme
< But i am wanting to have the
netgear and the apple airport extreme talk to each
other so that i can put the net gear in a seperate
room to extend the range of signal. </div>
This is not possible.
How can i do this?
You can't.
Netgear and Apple use different chips which means they won't and can't talk to each other when it comes to extending networks.

How can I extend the 2-year search window of Calendar search

How can I extend the 2-year search window of Calendar search in iPhone 5s ? I basically want 'Search' to search everything in the phone, not just restricted to a 2-year window.

See my link above... it's a documented limitation...
Calendar and Reminder search
Spotlight searches for the title of calendar events and reminders in a two-year window—it will reveal results from one year in the past and one year in the future. If an event has recurrences that fall in this range, it will find the event that is closest to the current date.
If multiple events have similar details (title, notes, location, and so on) and you search for these details, Spotlight will show the most recent event. To see more results, use search in Calendar or Reminders.

How can i extend the Apple TV storage to get an 1 TB? apple has any external hard disk or similar?

how can i extend the Apple TV storage to get an 1 TB? apple has any external hard disk or similar?

Only AppleTV1 has an internal PATA drive. The largest PATA drive available is 250gb.
Hacks are available to use the USB port on AppleTV1 to access more storage.
AppleTV2 does not have an internal drive.
Why do you need more storage in your AppleTV? iTunes streams video to AppleTV so no need to store it locally.

How can I extend the range of my WESTELL 7500? Please help.

Similar Messages

Maybe you are looking for