How can I find 0YEA_QUA_MON_DAY hierarchy from 0CALDAY in RSA1?
Dear expert,
How can I find 0YEA_QUA_MON_DAY hierarchy from 0CALDAY in RSA1? or any t-code?
i've try RSH1, but not found.
Megan Wu
Dear expert,
How can I find 0YEA_QUA_MON_DAY hierarchy from 0CALDAY in RSA1? or any t-code?
i've try RSH1, but not found.
Megan Wu
Similar Messages
-
How can i find my iphone from my mac computer
how can I find my iphone from my mac
i lost my iphone..I had find my iphone installed on it prior...
how could i locate from my mac computer -
How can I find a photo from the backup file in my pc?
How can I find a photo from the backup file in my pc?
I have accidentally erased a photo. It happened after the backup.I am not aware you can extract a single photo or a single app's content from the backup, you can either restore the whole backup to your phone or not restore. If you restore your last backup to your phone then any content that is currently on your phone will be replaced with what was on it at the time that the backup was made - so if you do decide to restore, first copy off any purchases to your computer's iTunes via File > Transfer Purchases, and copy any documents/files that you've udpated on the phone since the backup.
-
How can I find the index from a specific container?
How can I find the index from a specific container?
For example, if I'm traversing through textframes like so (an example, not tested):
var doc = app.activeDocument;
var story = doc.pages[0].textFrames[0].parentStory;
for (var i=0, l=story.textContainers.length; i<l; i++) {
var textFrame = story.textContainers[i];
if (textFrame.constructor.name == "TextFrame") {
var lastPara = textFrame.paragraphs.lastItem(); //How can I find the index of this in relation to the story?
How can I find the index of "lastPara" in relation to the story rather than the current container?
I tried:
var newPara = story.paragraphs[lastPara.index];
but this results in an invalid object. . .
alert(newPara.isValid); //returns falseThe .index property is the character offset. So lastPara will begin at story.characters[lastPara.index].
-
HT4623 how can I find my iphone from my pc
how can I find my iphone from my pc?
Yes, the problem is NOT the iOS itself.
When you connect to iTunes, can you make a picture of the "summary" page bottom: the iPhone memory line and post that here? -
How can I find sent photos from IPHoto?
There doesn't seem to be a way to see what photos I sent to whom on IPhoto. I sent a photo today to someone but I can't find it anywhere. This is not a good thing. Does anyone know how to find these emails that were sent? Thanks.
iPhoto is not an email client and the mail feature is a handy way to send a snap to Grandma rather than a replacement for an email app. It does not have an outbox, for instance. You can opt to bcc yourself on photos though or simply use an email client.
Regards
TD -
How can we find the web from the url
Hi Team,
I just need inputs:
I have URL's as below:
https://sharepointwebapp.com/departments/service/Documents/test.docx
https://sharepointwebapp.com/departments/course/Documents/test.pdf
Here, test.docx is available in "service" subsite.
test.pdf is available in "course" subsite.
How can I get the current web based on the document in code.
Please let me know.
Sandeep
KrishnasandeepHi,
Refer to the below table.
SPSite Constructor
OpenWeb Method
Site Returned
http://Server/Folder/File
There is no parameter (OpenWebmethod overload)
http://Server
http://Server/Subsite1/Subsite2/Folder/File
There is no parameter (OpenWebmethod overload)
http://Server/Subsite1/Subsite2
http://Server/Subsite1/Subsite2/Folder/File
http://Server
http://Server/Subsite1/Subsite2/Folder/File
/Subsite1
http://Server/Subsite1
http://Server/Folder/File
Subsite1/Subsite2
http://Server/Subsite1/Subsite2
http://Server/Folder/File
/SiteCollection/Subsite3
Error: There is no site named/SiteCollection/Subsite3
http://Server/Folder/File
/Subsite4
Error: There is no site named /Subsite4
http://Server/sites/SiteCollection/Subsite3/Folder/File
No parameter (OpenWeb method overload)
http://Server/sites/SiteCollection/Subsite3
http://Server/sites/SiteCollection/Folder/File
/sites/SiteCollection/Subsite3
http://Server/sites/SiteCollection/Subsite3
http://Server/sites/SiteCollection/Folder/File
Subsite3
http://Server/sites/SiteCollection/Subsite3
http://Server/sites/SiteCollection/Folder/File
Error: Invalid URL
http://Server/sites/SiteCollection/Subsite3/Folder/File
/sites/SiteCollection
http://Server/sites/SiteCollection
http://msdn.microsoft.com/en-us/library/ms474633.aspx -
How can i find contact information from phone?
While I was attempting to update the OS to 4.3.5 on the Iphone and error occurred that prevented me from completing the update. I ejected my phone from iTunes and immediately got a message on the phone telling me to connect to iTunes. When re-connected to iTunes I got a message saying my phone was in restore mode and that I needed to restore it. I did so and when prompted to sync with my existing phone profile / back up I did so. However, I got nothing restored and instead got my wife's contacts, etc copied to my phone. Is there a way that I can find the contact informaiton manually???
Please help!!!!ADOBE already took the payment they needed, they don't need my credit card anymore
please remove this private information from Adobe's data base. I can see that several
customers are angry with Adobe. I feel controlled by this company. I regret to have rented
this software as it did not even did a good job. HOW COME WE ARE BEING CONTROLLED ?
How come we cannot reach anyone and get a smart answer. Awaiting for a phone call or an
official confirmation that the private information about my credit card has being removed.
This is my order: Your Adobe Order number: AD014990712
Lucie who reached the several frustrated customers -
HT4436 How can I Find My iPhone from my iPad?
With only my iPad with me when I noticed I'd left my iPhone somewhere, I couldn't figure out how to log in to my iCloud account to Find my iPhone. Finally borrowed a computer, but there must be a way to log in with a browser on my iDevice. What am I missing (iCloud kept telling me to set up the account, no login page showed up)?
You cannot use iCloud.com from a mobile device. You need to download the "find my phone" app from the App Store. You can use this app on both your iPad on your iPhone.
-
We need to find where the files for the other user on the computer are now located. There were two other users on the old machine, which was taken into the store and ALL files were suppose to be transferred over to this computer. HELP!
It appears what happened is the installer though it was looking at a empty drive and just went ahead and installed.
I of course am assuming here you didn't use Disk Utility to format the drive first before installing, that would wipe out your files and programs for sure.
So what to do, what to do.
Well there is hope for you as long as the drive wasn't Filevaulted.
I'll explain. When a hard drive writes data for the first time to a drive, it starts at the very top and works it's way down.
When OS X was installed the first time, it was at the top of the drive, unless you upgraded then the upgraded OS X could have been written elsewhere.
Now when you just reinstalled OS X, the new OS went on the top of the drive, overwriting any data that was there previously, so what was there you have lost forever which is about 8GB or so. If it was the previous OS there, then your more in luck because only the old OS X was overwritten.
The remaining space on the drive still can have a copy of your files, provided it's not overwritten yet.
It's because when a hard drive deletes data or reformats, it doesn't remove the data off the drive or overwrites it immediately, it's just made so it's SPACE is available for new files to be written there.
So technically one can recover the deleted data off a non-encrypted/scrubbed hard drive with special software.
The way it does this is it reads the 1's and 0's of the files themselves, and through a lot of figuring out, can tell what that file is and what it belongs too.
So what you will have to do is this:
Create a data recovery/undelete external boot drive
or if you don't have the skills, then take it to a local PC/Mac tech and they can do a direct image of the drive and then you can run Data Rescue on it to rebuild your files. -
How can i find my iphone from my itunes
I lost my iphone and all i own is itunes, is there anyway i can use it to find it
Welcome to the Apple Community.
You can only locate your device when it is logged into iCloud and 'Find My Phone' is enabled, additionally the device will need to be switched on and connected to a wifi or cellular network.
Unfortunately, you cannot activate iCloud or 'Find My Phone' remotely.
If the device is wiped by you or another, you may not be able to locate the device (although some have reported they can) -
How can I find old recipes from eprint Entree?
I rwecll getting a recipe from eprints sometime in July of this year. I cannot find the recipe but wondered is there an archive section for eprint's Entree app?
I am afraid that there is not an archive to my knowlege. Those apps are generally run by third party creators and their contents are controlled by them. Have you tried looking up similar recipies online?
-Spencer -
TS3989 how can i find my pics on icloud on my computer
how can i find my photos from my ipone on icloud.com
I assume you are talking about PhotoStream? This is purely a conduit for moving pictures taken on one device onto all your others: the photos are not visible online.
iCloud offers a basic photo gallery in 'Photo Journal', though it is populated only from iPhoto for iOS, not from a Mac. Details here:
iPhoto and Photo Journal
and there is a sample album here:
Sample Photo Journal album -
How can i find out the table hierarchy
Hi experts,
I have one doubt. how can i find out the table hierarchy in the particular schema.
Let me explain my requirement in detail.. In my Database i have nearly 250 table each table have it's own temporary table(for authorization purpose we are maintaining the temporary tables) for each day i have to clear the temporary table data.
All temporary table connected with each other. i mean all the table having foreign key relationship.. while i attempt the delete the data from the temporary table it showed ORA-02292: integrity constraint violated - child record found.
So can any one please tell how can i delete the child table record first and then parent record table record.
Thanks in advance
ArunCREATE OR REPLACE FUNCTION get_child_tables (
ptable VARCHAR2,
powner VARCHAR2 DEFAULT 'SCOTT',
plevel NUMBER DEFAULT 10
RETURN stringarray
-- -- create this ON SQL*PLUS "CREATE OR REPLACE TYPE STRINGARRAY AS TABLE OF VARCHAR2(50);"
-- AUTHID CURRENT_USER
PIPELINED
AUTHOR DATE VERSION COMMENTS
======================================================================================
[email protected] 26-OCT-2009 1.0 Developed to ease developers effort to find Nth level of Referential integrity
======================================================================================
-- PURPOSE -> To find PARENT=> CHILD relational TABLE(S) in Oracle upto a depth max N Level.
--SYNTAX TO USE
SELECT * FROM TABLE( get_child_tables('DEPT','SCOTT',3)); Store this query in a file for your use
SELECT * FROM TABLE( get_child_tables('EMPLOYEE')); Store this query in a file for your use
-- RESULTS looks as below
--1 => DEPT
--2 => EMP
--2 => EMP2
--3 => EMP_CHILD
--3 => EMP2_CHILD
-- and so on
--This can be leveraged to use in any oracle database REGION 10g having and above.
--This FUNCTION gives formatted result of the Oracle 10g Hierarchical query result coded in the cursor
--to find MASTER => CHILD relational TABLE(S) upto a depth max 10 Level.
--The result of the PIPELINED function can be retrieved using Oracle new operator
--TABLE(array name) in SQL query.
--Due to the AUTHID CURRENT_USER compiler directive any user can use based on his/her access privileges on the database.
--GRANT EXECUTE ON SCOTT.get_child_tables TO PUBLIC;
--CREATE OR REPLACE PUBLIC SYNONYM get_child_tables FOR SCOTT.get_child_tables;
IS
atname stringarray := stringarray ();
-- create this ON SQL*PLUS CREATE OR REPLACE TYPE STRINGARRAY AS TABLE OF VARCHAR2(50);
vlevel NUMBER;
vtname VARCHAR2 (50);
nindex NUMBER := 0;
bprocessed BOOLEAN := FALSE;
CURSOR c1 (powner_in IN VARCHAR2, ptable_in VARCHAR2, plevel_in NUMBER)
IS
SELECT LEVEL, LPAD (' ', (LEVEL - 1) * 2, ' ') || pt AS "TNAME"
FROM (SELECT a.owner w1, a.table_name pt, a.constraint_name c1,
a.r_constraint_name r1, b.owner w2, b.table_name ct,
b.constraint_name c2, b.r_constraint_name r2
FROM all_constraints a, all_constraints b
WHERE a.constraint_name = b.r_constraint_name(+)
AND a.owner = b.owner(+)
AND a.owner =
UPPER (powner)
-- Change Owner here while testing
--AND A.r_constraint_name IS NULL
AND a.constraint_type IN ('P', 'R')) v1
START WITH pt =
UPPER
(ptable)
-- Change your master table here while testing the QUERY
CONNECT BY PRIOR ct = pt AND LEVEL <= plevel;
-- Change lavel here while testing
BEGIN
atname.EXTEND;
atname (1) := 'NOTHING';
OPEN c1 (powner, ptable, plevel);
LOOP
bprocessed := FALSE;
FETCH c1
INTO vlevel, vtname;
IF nindex > 1 AND atname (atname.LAST - 1) = vtname
THEN
--DBMS_OUTPUT.PUT_LINE('2 ==== vtname ' ||vtname || ' '|| atname.count|| ' '||atname.last || ' '||atname( atname.last-1));
bprocessed := TRUE;
END IF;
IF NOT bprocessed
THEN
nindex := nindex + 1;
atname.EXTEND;
atname (nindex) := vtname;
PIPE ROW (vlevel || ' => ' || vtname);
DBMS_OUTPUT.put_line ( ' **** nindex - atname( nindex) '
|| nindex
|| ' - '
|| atname (nindex)
DLOG('ADDING ',vTname); A LOGGING ATONOMUS PROCEDURE FOR DEBUG PURPOSE
END IF;
EXIT WHEN c1%NOTFOUND;
END LOOP;
CLOSE c1;
FOR i IN 1 .. atname.COUNT
LOOP
DBMS_OUTPUT.PUT_LINE('atname (i) ' ||atname (i));
END LOOP;
RETURN;
EXCEPTION
WHEN no_data_needed
THEN -- THIS EXCEPTION HAS TO BE THERE TO GET THE FUCTION WORKABLE
DBMS_OUTPUT.put_line (SQLERRM);
RETURN;
--SELECT * FROM TABLE( get_child_tables('TB_XOP_LETR_TEMPLATE','OPS$CMS',5));
END get_child_tables;
Edited by: user3066657 on Jul 21, 2011 8:42 AM
Edited by: user3066657 on Jul 21, 2011 11:26 AM -
I am trying to download xfinity tv go app. I can not find it in my App Store and can not download it from the comcast website. All I get is a blank screen in the App Store. My Apple ID is associated with a Canadian address. How can I find the app?
Its possible the App is not available in the Canadian store if the link doesn't work for you.
https://itunes.apple.com/us/app/xfinity-connect/id320788270?mt=8
Maybe you are looking for
-
How to attach a WebDynpro Adobe form to backend Business Object?
Hello, I would like to know if anyone has created an Interactive Adobe Form, and then after the user has filled it out (online, via WebDynpro view), attach the pdf form to an SAP Document, for example, Order, Purchase Order or Contract? I know how to
-
Critical SMS_Executive SQL Login failed for user 'NT AUTHORITY\SYSTEM'.
I am getting sql login errors on my sms executive log that i believe is stopping me from pxe booting. I have tried finding where to enter the credentials but i cannot find it. SMS_EXECUTIVE 4/10/2014 3:13:12 PM 2412 (0x096C) Starting SMS_EXECUTIVE...
-
Hi All, We are working on BW 3.5 version. We have installed BI Content for Procurement module. Now the client have come up with requirements where we need the below mentioned Key figures in various report. Please suggest whether I can find the below
-
Record Options in View menu is not visible / available
Hi, I've installed Labview 2.5 many times on my computer and I can't reach "Record Options" in the menu "View". What can I do to have "Record Options" ? Best regards, Nicolas
-
Hi The scenario is like this Suppose we take HUL(Hindustan Unilever) as one client. He want to have a Inter company Stock transfer between two plants in different company codes, but he dont want billing for this. My question is what are the accountin