How can I find transactions using list of field names
Hi,
I do have some field names . I wanted to know how can I find the list of transactions that uses those fields in SAP?
Regards,
Aman
Aman,
It will be hard work, take the where-used list from SE11 for program, function groups and etc.
Take the object name and go to SE80 and check in the tree if it has any transaction assigned.
regards,
Alexandre
It
Similar Messages
-
How can I find out the list of users who has the access to IT 0008
All,
How can I find out the list of users who has the W R permission for IT 008
for others?
SUIM doe not look like giving me the correct results.
Please advise.
Thanks,
From
PT.combine tables AGR_1251 and table AGR_Users on keyfield AGR_USERS
in tabel AGR_1251 select on Field LOW values IT0008.OR W OR R,
noiw you get also other values
So better solution run the query twice over AGR1251 first on IT0008 and secondly on values W OR R and then the result over table AGR_USERS
Youu also might put an additional selection on object P* (only selecting HR objects)
output wll be UID in table AGR_USERS -
I lost my ipod touchm how can i find it using the serial number??
As the title, how can i find my ipod touch using it's serial numberm Becouse i did'nt install find my iphone and mostly it's out of charge!!
I'm sorry to say you have NO specific way of finding it under those specific circumstances, other than filing a police report.
Hope this helps
Message was edited by: Radiation Mac -
Lost my ipad how can i find it useing a kindle fire
How can I find my iPad that has been lost
Try this...
Open the browser then type: iCloud.com in the address bar then tap the Find My iPhone app. (Same applies to iPads).
What to do if your iOS device is lost or stolen
Reporting a lost or stolen Apple product -
How can I find packages using pacman?
Hi--
I browsed through pacman HOWTOs and doc and I still don't know how I can find available packages on all the ftp sites in my pacman.conf file.
For example, I want to install Gnome. When I do :
pacman -Sy gnome,
it doesn't work. Is it because I should do something like :
pacman -Sy Gnome, or
pacman -Sy Gn..
Do you see what I mean? HOW DO I FIND THE RIGHT SYNTHAX FOR A PACKAGE, OR THE EXISTING PACKAGES?
Is there some kind of a search tool for the ftp repositories? For example,
pacman <-search option> Gno* (for all packages beginning with Gno)
ThanksCarbono wrote:pacman -Sy gnome,
it doesn't work. Is it because I should do something like :
In general you need to know name of the package(s). In the case of Gnome, Xfce4 and KDE, simply call the name of group. What you did suppose to work.
[root@localhost ~]# pacman -Sy gnome
:: Synchronizing package databases...
:: current is up to date
:: extra is up to date
:: unstable is up to date
:: staging is up to date
:: group gnome:
control-center gnome-applets gnome-backgrounds gnome-common
gnome-desktop gnome-icon-theme gnome-media gnome-mime-data
gnome-panel gnome-session gnome-themes gnome2-user-docs metacity
nautilus rep-gtk vte yelp
Install whole content? [Y/n] -
How can i find duplicate rows in a field of a table
hi all,
how can i able to find duplicate values in a field of a table????
Regardstest@ORA92>
test@ORA92> with x as (
2 select 1 as p, 'a' as q from dual union all
3 select 1 as p, 'b' as q from dual union all
4 select 2 as p, 'c' as q from dual union all
5 select 3 as p, 'd' as q from dual union all
6 select 3 as p, 'e' as q from dual union all
7 select 3 as p, 'd' as q from dual
8 )
9 select p, q,
10 case row_number() over (partition by p order by q)
11 when 1 then null
12 else 'Duplicate value: '||p||' of column p'
13 end as msg
14 from x;
P Q MSG
1 a
1 b Duplicate value: 1 of column p
2 c
3 d
3 d Duplicate value: 3 of column p
3 e Duplicate value: 3 of column p
6 rows selected.
test@ORA92>
test@ORA92>
test@ORA92>cheers,
pratz -
How can i get the value when the field name is user defined
Hi,
I have a one java method:
public ResultSet countUserDb(String id) {
ResultSet rs = null;
con = dbcon.connect();
String queryString = ("select count(*) as count from
db_allocation where user_id='"+id+"'");
Statement stmt = con.createStatement();
rs = stmt.executeQuery(queryString);
When i call it in a jsp file.
ResultSet counter =db.countUserDb(request.getParameter("id"));
if(counter.next())
int x=rs.getInt("count");
Tomcat said incorrect column name.How can i get the result set when the field name is user's defined.
Best regards
RickyHi Ricky
To access pseudo columns you can specify an alias or use the index on the column (e.g. getInt(1)).
Chris
NB: you should use bind variables instead of concatenating the id to the SQL statement. -
How can we find a user list for particular Purchase order?
We are having a Release group, release strategy and release code for purchase order.
i want the list of users for the particular purchase order..
can any one hel me.Hi,
This is SAP business one system admin forum. Please find correct forum and repost above discussion to get quick assistance.
Please close this thread here with helpful answer.
Thanks & Regards,
Nagarajan -
How can i find and use a SAVE_MATERIAL Exit in MM02?
Sorry i dont have any idea where to start ?
Hi,
question is what do you want to do in the user exit? Change or check data, issue other actions, etc.
I start normally with SE81, search for the application component and select the entire subtree by pressing F9. Then go to Information System.
In your case it is LO-MD-MM i suppose.
In the repository browser you can find user exits and Badis in this area under enhancements.
In your case BADI_MATERIAL_CHECK might be possible.
Kind Regards
Michael -
How can i find the tablename for that field and suggest the report logic
Hi experts
The concept of BOM for finished components are defined in terms of semi finished goods. Hence, routing of a component from raw materials can not be seen directly in system through standard report.
But users need to have the details of a routing of a component from raw material in one report. To provide the details in single report, development is required.
With this report users can see the routing from raw material till component in one single report.
Assumption
BOM is maintained for a component with all related semi finished components till raw material properly.
Material Number: MARA MATNR - Multiple selection option should be there (Mandatory)
Plant: AFRU WERKS - Single selection parameter (Mandatory)
If procurement type is E or X, system has to check the routing through CA03.
If procurement type if F, leave this field as blank
1.operator
2.material
3.material description
4.workcenter
5.vendor
6.operation description
7.uom
8.qty
9.uom
10.setuptime
11.processingtime
12.deliverytime
using cs12,cs13
here i have seen the details of finished goods components like semifinished goods,rawmaterils,i tried se11 to find the the table for relevent field,
i cant get, if possible to suggest me the logic and how to find the relevent table for
that field
Regards
dsfor exploding the bom if you know header material use
CALL FUNCTION 'CS_BOM_EXPL_MAT_V2'
EXPORTING
CAPID = 'PP01'
DATUV = SY-DATUM
MEHRS = 'X'
MTNRV = P_MATNR
WERKS = P_WERKS
TABLES
STB = I_BOM
EXCEPTIONS
ALT_NOT_FOUND = 1
CALL_INVALID = 2
MATERIAL_NOT_FOUND = 3
MISSING_AUTHORIZATION = 4
NO_BOM_FOUND = 5
NO_PLANT_DATA = 6
NO_SUITABLE_BOM_FOUND = 7
CONVERSION_ERROR = 8
OTHERS = 9.
now check PLPO & PLKO table for routing or AFVC and AFVV for routing.
if production order created you have to check in afvc and afvv else check in plpo and plko.
for checking with plpo and plko you have to check MAPL table.
for bom and material link
MAST,STPO,STKO.
stlnr is the common field
regards
shiba dutta -
TS4006 How can i find my mac?
In case i losse my mac. How can i find it using the program "find my mac"?
No, unfortunately.
-
How can we find the list of user exits for a transaction
hi all
iam new in user exits please send the basic details
how can we find the list of user exit for a perticular transaction and how can we determine that a particulr user exit is used for a field
regards
jagadishhi,
check the below links for userexits
http://help.sap.com/saphelp_46c/helpdata/en/64/72369adc56d11195100060b03c6b76/frameset.htm
FAQ's
http://http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.ficoexpertonline.com/downloads/User%20ExitsWPedit.doc
http://www.easymarketplace.de/userexit.php
http://wiki.ittoolbox.com/index.php/HOWTO:Implement_a_screen_exit_to_a_standard_SAP_transaction
1. what is the defference between enhancement and user-exits?
http://www.sap-img.com/abap/difference-between-badi-and-user-exits.htm
Re: difference between user exits & customer exits
Some Questions ! Plz help...
http://searchsap.techtarget.com/expert/KnowledgebaseAnswer/0,289625,sid21_gci1190924_tax299358,00.html?bucket=ETA
2. Difference between CMOD and SMOD?
http://www.sap-img.com/abap/what-is-the-difference-between-smod-and-cmod.htm
http://www.sap-img.com/abap.htm
http://sap.ittoolbox.com/groups/technical-functional/sap-r3-dev/diff-between-cmod-and-smod-236095
http://sap.ittoolbox.com/groups/technical-functional/sap-r3-dev/diff-between-cmod-and-smod-236107
check these links..
http://www.sapgenie.com/abap/tips_and_tricks.htm
http://www.sap-img.com/abap/field-exits-smod-cmod-questions-and-answers.htm
http://www.sap-img.com/abap/what-is-user-exits.htm
passing selet-option variable to subrouine...
Finding the user-exits of a SAP transaction code
Finding the user-exits of a SAP transaction code
Enter the transaction code in which you are looking for the user-exit
and it will list you the list of user-exits in the transaction code.
Also a drill down is possible which will help you to branch to SMOD.
Written by : SAP Basis, ABAP Programming and Other IMG Stuff
http://www.sap-img.com/*
report zuserexit no standard page heading.
tables : tstc, tadir, modsapt, modact, trdir, tfdir, enlfdir.
tables : tstct.
data : jtab like tadir occurs 0 with header line.
data : field1(30).
data : v_devclass like tadir-devclass.
parameters : p_tcode like tstc-tcode obligatory.
select single * from tstc where tcode eq p_tcode.
if sy-subrc eq 0.
select single * from tadir where pgmid = 'R3TR'
and object = 'PROG'
and obj_name = tstc-pgmna.
move : tadir-devclass to v_devclass.
if sy-subrc ne 0.
select single * from trdir where name = tstc-pgmna.
if trdir-subc eq 'F'.
select single * from tfdir where pname = tstc-pgmna.
select single * from enlfdir where funcname =
tfdir-funcname.
select single * from tadir where pgmid = 'R3TR'
and object = 'FUGR'
and obj_name eq enlfdir-area.
move : tadir-devclass to v_devclass.
endif.
endif.
select * from tadir into table jtab
where pgmid = 'R3TR'
and object = 'SMOD'
and devclass = v_devclass.
select single * from tstct where sprsl eq sy-langu and
tcode eq p_tcode.
format color col_positive intensified off.
write:/(19) 'Transaction Code - ',
20(20) p_tcode,
45(50) tstct-ttext.
skip.
if not jtab[] is initial.
write:/(95) sy-uline.
format color col_heading intensified on.
write:/1 sy-vline,
2 'Exit Name',
21 sy-vline ,
22 'Description',
95 sy-vline.
write:/(95) sy-uline.
loop at jtab.
select single * from modsapt
where sprsl = sy-langu and
name = jtab-obj_name.
format color col_normal intensified off.
write:/1 sy-vline,
2 jtab-obj_name hotspot on,
21 sy-vline ,
22 modsapt-modtext,
95 sy-vline.
endloop.
write:/(95) sy-uline.
describe table jtab.
skip.
format color col_total intensified on.
write:/ 'No of Exits:' , sy-tfill.
else.
format color col_negative intensified on.
write:/(95) 'No User Exit exists'.
endif.
else.
format color col_negative intensified on.
write:/(95) 'Transaction Code Does Not Exist'.
endif.
at line-selection.
get cursor field field1.
check field1(4) eq 'JTAB'.
set parameter id 'MON' field sy-lisel+1(10).
call transaction 'SMOD' and skip first screen.
*---End of Program
if u want to find the function exit
then check the below code
REPORT ZV_FIND_EXIT NO STANDARD PAGE HEADING.
TABLES : TSTC, TADIR, MODSAPT, MODACT, TRDIR, TFDIR, ENLFDIR.
TABLES : TSTCT.
DATA : JTAB LIKE TADIR OCCURS 0 WITH HEADER LINE.
DATA : FIELD1(30).
DATA : V_DEVCLASS LIKE TADIR-DEVCLASS.
PARAMETERS : P_TCODE LIKE TSTC-TCODE OBLIGATORY.
SELECT SINGLE * FROM TSTC WHERE TCODE EQ P_TCODE.
IF SY-SUBRC EQ 0.
SELECT SINGLE * FROM TADIR WHERE PGMID = 'R3TR'
AND OBJECT = 'PROG'
AND OBJ_NAME = TSTC-PGMNA.
MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
IF SY-SUBRC NE 0.
SELECT SINGLE * FROM TRDIR WHERE NAME = TSTC-PGMNA.
IF TRDIR-SUBC EQ 'F'.
SELECT SINGLE * FROM TFDIR WHERE PNAME = TSTC-PGMNA.
SELECT SINGLE * FROM ENLFDIR WHERE FUNCNAME =
TFDIR-FUNCNAME.
SELECT SINGLE * FROM TADIR WHERE PGMID = 'R3TR'
AND OBJECT = 'FUGR'
AND OBJ_NAME EQ ENLFDIR-AREA.
MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
ENDIF.
ENDIF.
SELECT * FROM TADIR INTO TABLE JTAB
WHERE PGMID = 'R3TR'
AND OBJECT = 'SMOD'
AND DEVCLASS = V_DEVCLASS.
SELECT SINGLE * FROM TSTCT WHERE SPRSL EQ SY-LANGU AND
TCODE EQ P_TCODE.
FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
WRITE:/(19) 'Transaction Code - ',
20(20) P_TCODE,
45(50) TSTCT-TTEXT.
SKIP.
IF NOT JTAB[] IS INITIAL.
WRITE:/(95) SY-ULINE.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
WRITE:/1 SY-VLINE,
2 'Exit Name',
21 SY-VLINE ,
22 'Description',
95 SY-VLINE.
WRITE:/(95) SY-ULINE.
LOOP AT JTAB.
SELECT SINGLE * FROM MODSAPT
WHERE SPRSL = SY-LANGU AND
NAME = JTAB-OBJ_NAME.
FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
WRITE:/1 SY-VLINE,
2 JTAB-OBJ_NAME HOTSPOT ON,
21 SY-VLINE ,
22 MODSAPT-MODTEXT,
95 SY-VLINE.
ENDLOOP.
WRITE:/(95) SY-ULINE.
DESCRIBE TABLE JTAB.
SKIP.
FORMAT COLOR COL_TOTAL INTENSIFIED ON.
WRITE:/ 'No of Exits:' , SY-TFILL.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(95) 'No User Exit exists'.
ENDIF.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(95) 'Transaction Code Does Not Exist'.
ENDIF.
AT LINE-SELECTION.
GET CURSOR FIELD FIELD1.
CHECK FIELD1(4) EQ 'JTAB'.
SET PARAMETER ID 'MON' FIELD SY-LISEL+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
or
1. in se11, goto table MODSAP
View table contents
2. in Type field, enter 'E' (for function exit)
3. For that tcode, u should know the program name.
eg. SAPLLMOB
4. then type SAPLLMOB and execute
or
REPORT z34331_user_exit .
TABLES : tstc, "SAP Transaction Codes
tadir, "Directory of Repository Objects
modsapt, "SAP Enhancements - Short Texts
modact, "Modifications
trdir, "System table TRDIR
tfdir, "Function Module
enlfdir, "Additional Attributes for Function Modules
tstct. "Transaction Code Texts
DATA : jtab LIKE tadir OCCURS 0 WITH HEADER LINE.
DATA : field1(30).
DATA : v_devclass LIKE tadir-devclass.
SELECTION-SCREEN BEGIN OF BLOCK a01 WITH FRAME TITLE text-001.
SELECTION-SCREEN SKIP.
PARAMETERS : p_tcode LIKE tstc-tcode OBLIGATORY.
SELECTION-SCREEN SKIP.
SELECTION-SCREEN END OF BLOCK a01.
START-OF-SELECTION.
Validate Transaction Code
SELECT SINGLE * FROM tstc
WHERE tcode EQ p_tcode.
Find Repository Objects for transaction code
IF sy-subrc EQ 0.
SELECT SINGLE * FROM tadir
WHERE pgmid = 'R3TR'
AND object = 'PROG'
AND obj_name = tstc-pgmna.
MOVE : tadir-devclass TO v_devclass.
IF sy-subrc NE 0.
SELECT SINGLE * FROM trdir
WHERE name = tstc-pgmna.
IF trdir-subc EQ 'F'.
SELECT SINGLE * FROM tfdir
WHERE pname = tstc-pgmna.
SELECT SINGLE * FROM enlfdir
WHERE funcname = tfdir-funcname.
SELECT SINGLE * FROM tadir
WHERE pgmid = 'R3TR'
AND object = 'FUGR'
AND obj_name = enlfdir-area.
MOVE : tadir-devclass TO v_devclass.
ENDIF.
ENDIF.
Find SAP Modifactions
SELECT * FROM tadir
INTO TABLE jtab
WHERE pgmid = 'R3TR'
AND object = 'SMOD'
AND devclass = v_devclass.
SELECT SINGLE * FROM tstct
WHERE sprsl EQ sy-langu
AND tcode EQ p_tcode.
FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
WRITE:/(19) 'Transaction Code - ',
20(20) p_tcode,
45(50) tstct-ttext.
SKIP.
IF NOT jtab[] IS INITIAL.
WRITE:/(95) sy-uline.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
WRITE:/1 sy-vline,
2 'Exit Name',
21 sy-vline ,
22 'Description',
95 sy-vline.
WRITE:/(95) sy-uline.
LOOP AT jtab.
SELECT SINGLE * FROM modsapt
WHERE sprsl = sy-langu AND
name = jtab-obj_name.
FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
WRITE:/1 sy-vline,
2 jtab-obj_name HOTSPOT ON,
21 sy-vline ,
22 modsapt-modtext,
95 sy-vline.
ENDLOOP.
WRITE:/(95) sy-uline.
DESCRIBE TABLE jtab.
SKIP.
FORMAT COLOR COL_TOTAL INTENSIFIED ON.
WRITE:/ 'No of Exits:' , sy-tfill.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(95) 'No User Exit exists'.
ENDIF.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(95) 'Transaction Code Does Not Exist'.
ENDIF.
Take the user to SMOD for the Exit that was selected.
AT LINE-SELECTION.
GET CURSOR FIELD field1.
CHECK field1(4) EQ 'JTAB'.
SET PARAMETER ID 'MON' FIELD sy-lisel+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
Regards,
Naveen -
Since I updated to iPhoto 9.5.1, when I open the program, I am now asked what library i wish to use and none are listed. I can not find my photos. How can I find and restore my photos. Can I use the Time Machine to do this?
You may be launching an older version of iPhoto from your Dock. Try to launch iPhoto directly from the Applications folder. Does that find a library to open?
If not, search with Find Any File for traces of your iPhoto library, as described by Old Toad in this post:
Re: My iPhoto Library disappeared...how do I get it back?
Download and run Find Any File to search for a file with "ThumbJPGSegment" in the file name. These are files common to all versions of iPhoto libraries.
FAF can search areas that Spotlight can't like invisible folders, system folders and packages. If there's a library hiding somewhere on your hard drive FAF will find it.
If that does not work, try to restore from your backup:
The photos were stored on the iMac hard drive. I do have the Time machine with backup on my Airport WIFI.
To restore from Time Machine, you need to open the folder, where your iPhoto library should be, before you enter Time Machine. Then go back in time along the timeline to the right of the TimeTunnel window. -
How to find out the list of field exists for a particular transaction
Hi all,
Can u please help me find out the list of field exits available for a particular Tcode?
Is it similar to User exit or . . . . ?
Thanks,
C.Selvaraj
SAP-QMCreate a program and add this code to find user exit
tables : tstc, tadir, modsapt, modact, trdir, tfdir, enlfdir.
tables : tstct.
data : jtab like tadir occurs 0 with header line.
data : field1(30).
data : v_devclass like tadir-devclass.
parameters : p_tcode like tstc-tcode obligatory.
select single * from tstc where tcode eq p_tcode.
if sy-subrc eq 0.
select single * from tadir where pgmid = 'R3TR'
and object = 'PROG'
and obj_name = tstc-pgmna.
move : tadir-devclass to v_devclass.
if sy-subrc ne 0.
select single * from trdir where name = tstc-pgmna.
if trdir-subc eq 'F'.
select single * from tfdir where pname = tstc-pgmna.
select single * from enlfdir where funcname =
tfdir-funcname.
select single * from tadir where pgmid = 'R3TR'
and object = 'FUGR'
and obj_name eq enlfdir-area.
move : tadir-devclass to v_devclass.
endif.
endif.
select * from tadir into table jtab
where pgmid = 'R3TR'
and object = 'SMOD'
and devclass = v_devclass.
select single * from tstct where sprsl eq sy-langu and
tcode eq p_tcode.
format color col_positive intensified off.
write:/(19) 'Transaction Code - ', "#EC NOTEXT
20(20) p_tcode,
45(50) tstct-ttext.
skip.
if not jtab[] is initial.
write:/(95) sy-uline.
format color col_heading intensified on.
write:/1 sy-vline,
2 'Exit Name', "#EC NOTEXT
21 sy-vline ,
22 'Description', "#EC NOTEXT
95 sy-vline.
write:/(95) sy-uline.
loop at jtab.
select single * from modsapt
where sprsl = sy-langu and
name = jtab-obj_name.
format color col_normal intensified off.
write:/1 sy-vline,
2 jtab-obj_name hotspot on,
21 sy-vline ,
22 modsapt-modtext,
95 sy-vline.
endloop.
write:/(95) sy-uline.
describe table jtab.
skip.
format color col_total intensified on.
write:/ 'No of Exits:' , sy-tfill. "#EC NOTEXT
else.
format color col_negative intensified on.
write:/(95) 'No User Exit exists'. "#EC NOTEXT
endif.
else.
format color col_negative intensified on.
write:/(95) 'Transaction Code Does Not Exist'. "#EC NOTEXT
endif.
at line-selection.
get cursor field field1.
check field1(4) eq 'JTAB'.
set parameter id 'MON' field sy-lisel+1(10).
call transaction 'SMOD' and skip first screen.
Rewards if useful........................
Minal -
How can I find what apple ID I used to register my iMac when I first booted up? I am being told that by using this ID I will be able to go on to the App store and down load iPhoto at no cost. Is this true? My iMac does not have iPhoto resident on it now and I only purchased my new iMac in December 2012
Thanks....Launch Keychain Access and click on Login in the left hand pane and then on Passwords. Next do search for Apple in the search field at the top and click on Apple ID Authenicication in the list that comes up. That will give you the ID no. and password.
OT
Maybe you are looking for
-
I would like all my old files under the same account as all my news files so that I don't have to switch back and forth between user accounts
-
How can i send an error message at EXIT_SAPMM06E_013 ?
Hi I'm making some validations to Vendor and Partner Functions (table control in 'Partners' Strip) in Creting/Changing Purchase Orders (ME21N/ME22N). I know the suitable user exit is EXIT_SAPMM06E_012 for making validation before saving, but this ex
-
How to return the newly generated sequence id for an INSERT statement
A record is to be inserted into a table with a sequence for the primary key. The newly inserted sequence value is to returned on successful insertion. Is it possible to do all this in a single statement (say executeUpdate or any other) using java.sql
-
Assistance required to re-establish my wireless network!
Hi Everybody Newbie here! I hope one of you clever folks can assist me with this one. I live in Bulgaria and we have a home office with 1 x G5 iMac and 1 x G4 iBook both connected to the internet via a wireless router (both Mac's with built-in airpor
-
Adding different output formats to VF31
Hi I am trying to add multiple output options to the VF31, reprint billing Currently VF31 does ahtwver the previous format was Such as if the doc is sent to printer, it will only send to printer but not to anything else So users should be able to sen