How can i get the Batch Numbers & batch attributes at delivery transaction

Hi experts,
Let me know how user will select the specific batch number and attribute at delevery transaction level.
Thanks in advance
Hemkanya

Hi ,
Check the thread
No batch number appears while saving delivery
*Close the thread if issue solved.
Regards
Jambulingam.P

Similar Messages

How can I get the phone numbers in contacts to appear with dashes between the first 3 numbers, the next 3 numbers, and the last 4 numbers? Until very recently it did so. Contacts on my macbook pro does show up this way. I do have a mobile me account an

How can I get the phone numbers in contacts to appear with dashes between the first 3 numbers, the next 3 numbers, and the last 4 numbers? Until very recently
it did so. Contacts on my macbook pro does show up this way. I do have a mobile me account and in the past syncing was no problem. What setting has changed?

The phone number format as well as the date language and format and the time format are controlled by the Region Format setting. Go to Settings > General >International > Region Format. When you change a region format, you can go back one page (to International) and see an example of the date/time/phone number format that your selected region format will produce.

How can I get the chapter numbering in automatic directory

How can I get the new pages to take over the chapter numbering in automatic directory.

Hi Peter,
thank you for the quick answer.
I'm new in the community therefor I have a additional question is there somebody reading who will take this as an feature for further updates of pages?
I think this is a"must" for professionell work.
Marcus

How can i get the failed row numbers in batch insertion?

Afeter execution of batch insert operation into a table, i use OCIAttrGet() to get the error number of insertion, as expected, it returns the correct number. however, when i use OCIParamGet() to get an error handle and then to get the exact failed row numbers , OCIParamGet() returns -2 , means "INVALID_HANDLE". can anyboy tell me why ? how can i get the exact failed rows?
the snapshot of my code :
int errNum = 0;
int nRet = 0;
nRet = OCIAttrGet((dvoid *)m_pIIOdbc->m_pStmtAll,OCI_HTYPE_STMT,&errNum,
          0,OCI_ATTR_NUM_DML_ERRORS, m_pIIOdbc->m_pErrHandle);
if (errNum)
     OCIError* pErrHndl;
     int* pRow_off = new int[errNum];
     for (int i = 0; i < errNum; i++)
     nRet = OCIParamGet(m_pIIOdbc->m_pErrHandle,
OCI_HTYPE_ERROR, m_pIIOdbc->m_pErrHandle, &pErrHndl, i + 1);
     nRet = OCIAttrGet (pErrHndl, OCI_HTYPE_ERROR, &pRow_off, 0,
     OCI_ATTR_DML_ROW_OFFSET, m_pIIOdbc->m_pErrHandle);
          delete []pRow_off;

now the code is :
OCIEnv      *m_pEnvHandle;
OCIError      *m_pErrHandle;
OCIError     *m_pErrHandle2;
OCIServer *m_pSrvHandle;
OCISvcCtx *m_pSvcHandle;
OCIStmt *m_pStmtExec;
OCIStmt *m_pStmtAll;
OCIError** m_pErrorHndl;
int* m_pRowOff; //the array that will contain the failed row numbers
int     m_nArrayLength; //length of array in once batch operation
int m_nErrNum; //error number
int m_nSucCount; //successful record number
//initialization
//m_nArrayLength is a parameter passed in, so i can not tell the exact length of the array, dynamic space allocation is needed
m_pErrorHndl = new OCIError*[m_nArrayLength];
m_pRowOff = new int[m_nArrayLength];
//execution
OCIStmtExecute(
          m_pSvcHandle,
          m_pStmtAll,
          m_pErrHandle,
          (ub4)m_nArrayLength,
          (ub4)0, (OCISnapshot *)NULL, (OCISnapshot *)NULL,
          OCI_BATCH_ERRORS
//get successful records number
m_nSucCount = 0;
OCIAttrGet((dvoid *)m_pStmtAll,OCI_HTYPE_STMT,&m_nSucCount,
          0,OCI_ATTR_ROW_COUNT, m_pErrHandle);
//get error numbers
m_nErrNum = 0;
OCIAttrGet((dvoid *)m_pStmtAll,OCI_HTYPE_STMT,&m_nErrNum,
          0,OCI_ATTR_NUM_DML_ERRORS, m_pErrHandle2);
//get failed row numbers into the array
if (m_nErrNum)
          //get failed row numbers into the array
          for (int i = 0; i < m_nErrNum; i++)
               //initiallize error handles               OCIHandleAlloc((dvoid*)m_pEnvHandle, (dvoid**)&m_pErrorHndl,
                    OCI_HTYPE_ERROR, (size_t)0, (dvoid**)0);
               OCIParamGet(m_pErrHandle, OCI_HTYPE_ERROR, m_pErrHandle2, (void**)&m_pErrorHndl[i], i);
               OCIAttrGet (m_pErrorHndl[i], OCI_HTYPE_ERROR, &m_pRowOff[i], 0,
                                        OCI_ATTR_DML_ROW_OFFSET, m_pErrHandle2);
now, if batch insert is executed, eg, there are 10 records to be inserted, thus m_nArrayLength is set to be 10. There are 5 records of the 10 have exist in database, so some of insert operations will fail. After execution, m_nErrNum is 5, and i can get the failed row numbers.Everything seems go well.
However, if batch updata is excuted, eg, 10 records to be updated, m_nArrayLength is set to be 10, and also there are 5 records of the 10 have exist in database. After execution, the OCIStmtExecute() returns 1, m_nErrNum got by
OCIAttrGet((dvoid *)m_pStmtAll,OCI_HTYPE_STMT,&m_nErrNum,
          0,OCI_ATTR_NUM_DML_ERRORS, m_pErrHandle2)
is 0, and m_nSucNum is 5. Why?? how can I get the rows that fail? i have to know which rows do not exist in database??

I would like to read a text file in which the decimal numbers are using dots instead of commas. Is there a way of converting this in labVIEW, or how can I get the program to enterpret the figures in the correct way?

The program doest enterpret my figures from the text file in the correct way since the numbers contain dots instead of commas. Is there a way to fix this in labVIEW, or do I have to change the files before reading them in the program? Thanks beforehend!

You must go in the labview option menu, you can select 'use the local
separator' in the front side submenu (LV6i).
If you use the "From Exponential/Fract/Eng" vi, you are able to select this
opton (with a boolean) without changing the labview parameters.
(sorry for my english)
Lange Jerome
FRANCE
"Nina" a ecrit dans le message news:
[email protected]..
> I would like to read a text file in which the decimal numbers are
> using dots instead of commas. Is there a way of converting this in
> labVIEW, or how can I get the program to enterpret the figures in the
> correct way?
>
> The program doest enterpret my figures from the text file in the
> correct way since the numbers contain dots instea
d of commas. Is there
> a way to fix this in labVIEW, or do I have to change the files before
> reading them in the program? Thanks beforehend!

I have entered the wrong numbers to put my phone in pass code lock. However, I didn't set the autolock....how can I get the pass code lock reset?

I have entered the wrong numbers to put my phone in pass code lock. However, I didn't set the autolock....how can I get the pass code lock reset?

Your only choice is to place the phone in DFU mode (search Google for instructions) and restore as a new device. You will lose all your data.

How can I set the number of batch process for DTP globally?

Hi guys,
How can I set the number of batch process for DTP in system globally?
For eg. set the number to 1
Any hint is appriciated!
Regards,
Liying

Hi,
In DTP screen also you can view batch settings. Check the Settings menu, you will find Batch.
Reg
Pra

How can I get the value of "Warehose" column in a form

How can I get the value of "Warehouse" column in the form below (I mean what table that contain this value):
Production Supervisor >> Batches >> (Button) Material Details >> (Button) Line Allocations
Well, for more clearly! My problem is I must have the Unit Cost of Items, so I've got it in the cm_cmpt_dtl (table), but if I want to, I must create a relation that require 2 filed, they're Item_ID and Whse_Code.
There's no problem with Item_ID, but Whse_Code seem to be the Mission Impossible (hix, I hate that film!!!!)
I wonder if It was right to post this topic here. But anyway I just post my question here, hope I could get some help.

wow, many, many, many.... and many thanks!
Just add a tiny modify to check out the Batch_type
doc_id = (select batch_id from gme_batch_header where batch_no='&batch_number' and batch_type = 0)
Because the batch_no can be duplicated as we also create Batch and Filrm Planned Order.
Many thanks for your support!
P/S: Sorry for my terrible English :P

How can I get the return code of SQL*Plus under Win2000Pro

How can I get the return code of SQL*Plus under Win2000Pro ?

In a DOS batch script? Try ECHO %ERRORLEVEL%
-- CJ

How can I get the 23 July update to load onto my iPad. I haven't been able to access my documents or work for weeks and need to use it. Has anyone else had similar problems?

How can I get the 23 July update to load onto my iPad. I haven't been able to access my documents or work for weeks and need to use it. Has anyone else had similar problems?

Hello Arthur,
Thank you for the reply.
You were correct that deleting the app and reinstalling it was the only thing to make it work but unfortunately I lost all the documents I made, even though they were backed up to iCloud before i deleted the app. At the same time as deleting pages I had to delete keynote and numbers too, so I've lost all the documents in them too.
The mb of data which was assigned to each programme in iCloud has reduced, so. I guess they are gone for good. Is there any other way to reaccess them?
Not your fault but I am a bit fed up the the iPad. I have lost work that I've done and have no other copy apart from what was in iCloud, as I don't have a printer and couldn't email them too myself as I couldn't get into the programme and i've also got episodes of tv series I purchased that I can't download and albums that are half downloaded with songs missing, so I feel a bit swindled out of time and money and am going back to DVD , pen and paper and CDs .
Instead of using iCloud I guess the only way to make sure I don't loose any more documents it to email them to myself each time I save them on the iPad. Is there anything else you could suggest please?
I don't have any other apple products apart from iPods, so I can't access the iCloud on anything else can I?
Thanks
Amanda

How can i get the document full path in S_TieDocument?

I create a new S_TieDocument and override 2 methods:
extendedPreInsert and extendedPostInsert
how can i get the document full path in these 2 methods?
(e.g. if i use the system user to upload a new file named 'test.file' in system root path /home/system, and i want to get the document full path '/home/system/test.file', how to get it?
anybody know it, pls tell me, thanks a lot.
java source is as below
package oracle.ifs.server;
import oracle.ifs.beans.Document;
import oracle.ifs.beans.DocumentDefinition;
import oracle.ifs.beans.LibraryObjectDefinition;
import oracle.ifs.beans.LibrarySession;
import oracle.ifs.beans.PublicObject;
import oracle.ifs.common.AttributeValue;
import oracle.ifs.common.IfsException;
import oracle.ord.itech.cmsdk.ws.view.EmbeddedCMSDKWebServicesWSStub;
public class S_TieDocument extends S_Document
public S_TieDocument(S_LibrarySession session, S_LibraryObjectData data)
throws IfsException
super(session, data);
public S_TieDocument(S_LibrarySession session, java.lang.Long classID)
throws IfsException
super(session, classID);
// Overrides
public void extendedPreInsert(OperationState opState,
S_LibraryObjectDefinition def)
throws IfsException
// Always call super
super.extendedPreInsert(opState, def);
// Get the LibrarySession
S_LibrarySession session = getSession();
def.setUserSetAttribute("CUSTOMATTRIBUTE",
AttributeValue.newAttributeValue(""));
//how can i get the document file full path here?
public void extendedPostInsert(OperationState opState,
S_LibraryObjectDefinition def)
throws IfsException
// Get the LibrarySession
S_LibrarySession session = getSession();
//how can i get the document file full path here?
}

In the new version of Numbers this option is not available. You will have to type the file name into the header yourself. You can post feedback to Apple using the menu item "Numbers > Provide Numbers Feedback"
or use Numbers2.3 which should be in the folder "/Applications/iWork '09" if you previously had it installed

How can I get the attributes details like user name, mail , from sAMAccount csv or notepad file through powershell or any other command in AD?

How can I get the attributes details like user name, mail , from sAMAccount csv or notepad file through powershell or any other command in AD?

Ok what about If i need to get all important attributes by comparing Email addresses from excel file and get all required answers
currently I am trying to verify how many users Lines are missing , Emp numbers , Phones from AD with HR list available to me.
I am trying to Scan all the AD matching HR Excel sheet and want to search quickly how many accounts are active , Line Managers names , Phone numbers , locations , title , AD ID .
these are fields I am interested to get in output file after scanning Excel file and geting reply from AD in another Excel or CSV file
Name’tAccountName’tDescri ption’tEma I IAddress’tLastLogonoate’tManager’tTitle’tDepartmenttComp
any’twhenCreatedtAcctEnabled’tGroups
Name,SamAccountName,Description,EmailAddress,LastLogonDate,Manager,Title,Department,Company,whenCreated,Enabled,MemberOf | Sort-Object -Property Name
Can you modify this script to help me out :)
Hi,
Depending on what attributes you want.
Import-Module ActiveDirectory
#From a txt file
$USERS = Get-Content C:\Temp\USER-LIST.txt
$USERS|Foreach{Get-ADUser $_ -Properties * |Select SAMAccountName, mail, XXXXX}|Export-CSV -Path C:\Temp\USERS-ATTRIBUTES.csv
#or from a csv file
$USERS = Import-CSV C:\Temp\USER-LIST.csv
$USERS|Foreach{Get-ADUser $_.SAMAccountName -Properties * |Select SAMAccountName, mail, XXXXX}|Export-CSV -Path C:\Temp\USERS-ATTRIBUTES.csv
Regards,
Dear
Gautam Ji<abbr class="affil"></abbr>
Thanks for replying I tried both but it did not work for me instead this command which i extended generated nice results
Get-ADUser -Filter * -Property * | Select-Object Name,Created,createTimeStamp,DistinguishedName,DisplayName,
EmployeeID,EmployeeNumber,Enabled,HomeDirectory,LastBadPasswordAttempt,LastLogonDate,LogonWorkstations,City,Manager,MemberOf,MobilePhone,PasswordLastSet,BadLogonCount,pwdLastSet,SamAccountName,UserPrincipalName,whenCreated,whenChanged
| Export-CSV Allusers.csv -NoTypeInformation -Encoding UTF8
only one problem is that Manager column is generating this outcome rather showing exact name of the line Manager .
CN=Mr XYZ ,OU=Users,OU=IT,OU=Departments,OU=Company ,DC=organization,DC=com,DC=tk

My InDesign document has two page 1s and I can't get the page numbers to work. Help!

My InDesign document has two page 1s and I can't get the page numbers to work. Help! How do I fix this?

Do you mean the first section is starting at page one?
And the second one now is starting at page two?
So I would ask why you would need sections at all?
Did you set the controls for Automatic Page Numbering?
If you select the particular page where section two is starting in the Pages Panel, you could untick the Start Section option in the numbering and section dialog. That would remove the section. You cannot do that with the very first section, but you should set the first section to Automatic Page Numbering if you ever want to use your document with an inDesign book file.
Uwe

Pro: in RF Development how can i get the scaned barcode value to Tcode

Hi,
I need to develop a custom RF settings for Scaner. I have gone through the SAP Provided documentation. SAP Has given in report we need to call Screen.
Every thing is clear for me... creating report, screen, triggering messages, customization.. etc. <b>My question</b> is what are naming conventions i need to use. it's custom Transaction. When ever we scan the Barcode, how that value is passing to initial screen of my Program. how can i keep it in SAP Memory. once after getting the value it's anormal transaction. i can code for that. how can i get the scaned value.

Hi!
Most (of my) customers use their scanners in keyboard simulation mode. Than it's like typing the number (or character) of the barcode. -> You need an input (char) field. Most (all?) scanners can be programmed to add a constant at the end -> use 'enter' and you get your PAI triggered.
Then scanning is same as typing 11 (or 13 or whatever) numbers on keyboard.
Other option would be, using scanner in native mode. But then you need a kind of device driver, which calls SAP via RFC. Possible, but more complex (because of missing alternative 'keyboard' in case of trouble).
What happens, if scanner can't read barcode, but user can identify numbers below -> you need anyway char-input field reacting on keyboard, too.
Regards,
Christian

How can I get the photos from iPhoto copied to a disk in the order I want?

How can I get the photos from iPhoto copied to a disk in the order I want??

To ensure a custom ordering, sort the files in an album and rename the files with a sequentially numbered filename.
File > Export > Version/Originals
Then use "Filename > Sequential"
or "Filename > Album name with index"

How can I get rid of numbers that are covering my entire desktop, caused by right-clicking "Clean Up Selection" on an icon?

How can I get rid of numbers that are covering my entire desktop, caused by right-clicking "Clean Up Selection" on an icon? The Apple OS X Mavericks blue & green desktop is totally gone. HELP!

Here's a screenshot of my desktop, as of a few minutes ago: http://lewgoodman.com/desktop.tiff

How can i get the Batch Numbers & batch attributes at delivery transaction

Similar Messages

Maybe you are looking for