How can I get the items gride of MIRO trx?

Hi everyone,
I have a requirement where I need to get the items grid of MIRO trx. Is there a function module to do this?
Thanks in advance!
Regards.
Leo.

Hi Leo,
try to use the BadI MRM_HEADER_CHECK.
The parameter TI_DRSEG contais the values of the grid.
FC

Similar Messages

I have the Watchtime app on my iPad (1) and after an iPad restore my purchased items in the watch time app will not restore, however the items appear for purchase. how can i get the items to restore.

Puchased items in my watchtime app will not restore to my ipad (1) after an ipad restore. The items appear ready for purchase. how can i restore the items.

Following ultimately helped me : Make sure that you are logged in at the App Store App or iTunes App with your apple ID and password with a US account. Turn your iPad off and on and than you should see the Radio button again. It won't work if you are logged on with a foreign account. If you are not logged in at all, it worked, too.

How can I get and change the items grid of MIRO trx

Hi everyone,
I have a requirement where I need to get and change the tax code field in MIRO's item grid. Is there a function module / Badi to do this? I used MRM_HEADER_CHECK, but the parameters related with this badi only allows read but not change them.
Do you have any idea?
Thanks in advance!
Regards.
Leo.

Hello,
You can change that table with help of the filed-symbol in the BADI MRM_HEADER_CHECK.
LOOP AT ti_drseg INTO ls_drseg.
lv_index = sy-tabix.
***... do your processing
MODIFY ti_drseg FROM ls_drseg INDEX lv_index.
ENDLOOP.
FIELD-SYMBOLS: <drseg> TYPE mmcr_tdrseg.
ASSIGN ('(SAPLMR1M)ydrseg[]') TO <drseg>.
<drseg> = ti_drseg[]. " this will modify the data in MIRO with your modified data
Regards,
Naimesh Patel

How can I get the items I was refunded for in iTunes?

Stedman1 maybe you can answer this question rather than remove it. Let me know how I can get my own account details. I need to find out the items I was refunded for. If mentioning your name is against Apple's rules of posting here, remove the post and I'll post again without your name. Thank you.

Everybody who posts on here, including Stedman1, are just fellow users, none of us have the ability to remove any posts - only the site moderators can do that. If you've had posts removed then I assume that they broke the forum's terms of use in some way (and you should have received an email explaining why).
If you've had refunds then did you not receive any email from Apple listing what they were for, or can you not tell based on what you asked for refunds for and the amount(s) that you received ? If not then probably only Apple can give you that information.

I somehow lost a large amount of my music downloads and albums that I had uploaded to iTunes. How can I get the items I downloaded from iTunes Store again?

I upgraded my Anti-Virus and it included a storage box which I tried to use but it filled up with my iTunes music so I deleted that but evidently it also removed a lot of my music from my iTunes libraries. I can re-upload all the music from CDs but how do I replace the music I bought from the iTunes Store? I really don't want to buy the music again, in fact I just can't do that. Any suggestions?

LindyLouToo wrote:
... how do I replace the music I bought from the iTunes Store?
Download Past Purchases
Sign in with the Apple ID that you used for the original purchase. See which Apple ID you used to download an item.
2 )See if the content is available for redownload. Previously purchased items might not be available if they're no longer on the iTunes Store

How can i get the item of combobox in javascript LCD?

Hi!
I have a question about javascript in LCD i want to get or assign the item value of a combobox because i need to mapping and i´ve tried using the option
form1.Page.Contenedor.RadioBtn.rbTipo[1].caption = "nuevotexto";
form1.Page.Contenedor.RadioBtn.rbTipo[1].rawValue = "nuevotexto";
and more... but i don´t know if that is possible, could someone help me?
thank's

Hi,
I think you are trying to set the value of a radio button group(???).
If so, then you first need to look in the Object > Binding palette to set the bound values.
Then you can set the value of the radio buttons by referencing the exclusion group and not an individual radio button.
If you have three radio buttons in an exclusion group 'RadioBtn' and they had bound values of '1', '2' and '3'. Then the following script would select the second button in the group:
form1.Page.Contenedor.RadioBtn.rawValue = "2";
If I have picked up your query wrong, then come back with some more info.
Niall

The bookmarks toolbar is there but has no item buttons on it. How do I get the items back for this toolbar? Also would like to know if the toolbars can be put on the same line to make more room on the page (drag & drop) ??

The bookmarks toolbar is there but has no item buttons on it. How do I get the items back for this toolbar?
Also would like to know if the toolbar can be put on the same line to make more room on the page (drag & drop) ?? Like the menu & bookmarks toolbar could/should fit on same line. This would add more page view...
Floyd Perry
Thanks

Check that you still have the "Bookmarks Toolbar items" placed on the Bookmarks Toolbar
* Make sure that you have the "Bookmarks Toolbar" visible: "View > Toolbars"
* Check in "View > Toolbars > Customize" that the "Bookmarks Toolbar items" is on the Bookmarks Toolbar
* If the "Bookmarks Toolbar items" is not on the Bookmarks Toolbar then drag it back from the Customize window onto the Bookmarks Toolbar
* If you do not see the "Bookmarks Toolbar items" then click the "Restore Default Set" button
You can only move the content from a toolbar onto other toolbars if all toolbars support that feature. You need to check that in the options of each toolbar.

How can I get an item that has the broadcast icon next to it into MP3 format so I can put it on my ipod nano?

Question: how can I get an item in my itunes library, on my mac os 10.6.7 that has a broadcast icon next to it into MP3 format so I can play it on my ipod? right now it won't let me, and it's very frustrating!!!! thanks

I might have misunderstood what you mean by the "broadcast icon," but if you are talking about an audio stream, then there is just no way you can convert a stream to MP3. What this would involve is either recording the stream, and then you would just be replaying the recorded audio on your iPod (is this what you are trying to achieve?), or reading the stream directly on your iPod, which an iPod nano does not support (it would need wireless connectivity).
Hope this helps

How can i get my items to stay in place and not cross over each other when readjusting the browser s

How can i get my items to stay in place and not cross over each other when readjusting the browser size.
Basically on my site when i go from a small screen to a big screen everything doesn't adjust to the screen size. I don't know what im missing
Here's the link to the page all the pages & they all do it
http://theatricalworkslive.com/
Thanks in advance

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, or by a peripheral device.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

CS3: Rotated page item: How can I get the top-right point

Hi
I have a rotated page item. Now I should have the top-right and the bottom left point. If I get the rectangle of this page item I only have the top-left and the bottom-right point. And I can read the rotation angle.
- How can I get the missing points?
Thanks
Hans

Algorithmically speaking (ie, this is NOT real code), isn't it just something like:
if page.rotationAngle == 90 then
origTopLeft = (newBottomRight.Y, newTopLeft.X);
else if page.rotationAngle == -90 then
origTopLeft = (newTopLeft.Y, newBottomRight.X);
else if page.rotationAngle == 180 then
origTopLeft = newBottomRight;
else
origTopLeft = newTopLeft;

HT3552 I am billed 3 times for a same item. How can I get the problem fixed? Thanks a lot for your help.

I am billed 3 times for a same item. How can I get the problem fixed? Thanks a lot for yur help. nhuttan448

Go here:
http://www.apple.com/support/itunes/contact/
and follow the instructions to report the issue to the iTunes Store.
Regards.

HT1766 I purchased an iPad air and chose a backup from my iPhone 5s. The only issue is only 30 of my photos downloaded to my iPad and none of the music. How can I get all items on the iPad?

I purchased an iPad air and chose a backup from my iPhone 5s. The only issue is only 30 of my photos downloaded to my iPad and none of the music. How can I get all items on the iPad?

you are using I tunes as the middle man for this back up, right?
When you plug in the pad to i tunes, give it a unique name, like my pad. I tune may be thinking it is talking to your phone. It will keep track of what you what on each device. Then plug your phone back in, and make sure your photos are uploaded to the computer - in i photo if you are using a mac, or in whatever photo program you are using on a windows device. You also want to make sure you have uploaded to the computer all of your music.
Once you get all that stuff there, plug the pad back in, and go through each of the tabs - selecting the music, photos etal that you want on the pad, then resync.

This is a silly question, but I cannot fix it! The icons that appear on my photos after I edit them, have gone away. The only way I can see them is in the Grid view. How can I get the icons back on the thumbnail photos of the full gallery that is loaded?

This is a silly question, but I cannot fix it! The icons that appear on my photos after I edit them, have gone away. The only way I can see them is in the Grid view.
How can I get the icons back on the thumbnail photos of the full gallery that is loaded? TIA =)

You have likely dragged the size of the filmstrip thumbnails to a small size that prevents Lightroom from displaying the badges. Using your mouse, mouse over the top line of the filmstrip and then drag it supports to increase the size.

HT1329 How can I get the songs on my iPod onto my new iTunes library?

I have an iPod that was synced to another iTunes library on another PC. The PC died and I replaced it with a MacBook Pro but it keeps saying the iPod is synced w/ another iTunes library. How can I get the songs on my iPod on the new iTunes library?

Some of the information below has subsequently appeared in a document by turingtest2: Recovering your iTunes library from your iPod or iOS device - https://discussions.apple.com/docs/DOC-3991
Your i-device was not designed for unique storage of your media. It is not a backup device and media transfer was planned with you maintaining a master copy of your media on a computer which is itself properly backed up against loss. Syncing is one way, computer to device, updating the device content to the content on the computer, not updating or restoring content on a computer. The exception is iTunes Store purchases which can be transferred to a computer.
iTunes Store: Transferring purchases from your iOS device or iPod to a computer - http://support.apple.com/kb/HT1848 - only purchases from iTunes Store
For transferring other items from an i-device to a computer you will have to use third party commercial software. Examples (check the web for others; this is not an exhaustive listing, nor do I have any idea if they are any good):
- Expod (free) - http://www.headlightsoft.com/expod/ - Mac, universal for 104.+ (newer machines try de-Tune)
- deTune (free) - http://www.headlightsoft.com/detune/ - Mac, 10.5+
- Senuti - http://www.fadingred.com/senuti/
- Phoneview - http://www.ecamm.com/mac/phoneview/
- MusicRescue - http://www.kennettnet.co.uk/products/musicrescue/
- Sharepod (free) - http://download.cnet.com/SharePod/3000-2141_4-10794489.html?tag=mncol;2 - Windows
- Snowfox/iMedia - http://www.mac-videoconverter.com/imedia-transfer-mac.html - Mac & PC
- iexplorer (free) - http://www.macroplant.com/iexplorer/ - Mac&PC
- Yamipod (free) - http://www.yamipod.com/main/modules/downloads/ - PC, Linux, Mac [Still updated for use on newer devices? No edits to site since 2010.]
- 2010 Post by Zevoneer: iPod media recovery options - https://discussions.apple.com/message/11624224 - this is an older post and many of the links are also for old posts, so bear this in mind when reading them.
Syncing to a "New" Computer or replacing a "crashed" Hard Drive - https://discussions.apple.com/docs/DOC-3141 - dates from 2008 and some outdated information now.
Copying Content from your iPod to your Computer - The Definitive Guide - http://www.ilounge.com/index.php/articles/comments/copying-music-from-ipod-to-co mputer/ - Information about use in disk mode pertains only to older model iPods.
Get Your Music Off of Your iPod - http://howto.wired.com/wiki/Get_Your_Music_Off_of_Your_iPod - I am not sure but this may only work with some models and not newer Touch, iPhone, or iPad.
Additional information here https://discussions.apple.com/message/18324797

How can I get the value of "Warehose" column in a form

How can I get the value of "Warehouse" column in the form below (I mean what table that contain this value):
Production Supervisor >> Batches >> (Button) Material Details >> (Button) Line Allocations
Well, for more clearly! My problem is I must have the Unit Cost of Items, so I've got it in the cm_cmpt_dtl (table), but if I want to, I must create a relation that require 2 filed, they're Item_ID and Whse_Code.
There's no problem with Item_ID, but Whse_Code seem to be the Mission Impossible (hix, I hate that film!!!!)
I wonder if It was right to post this topic here. But anyway I just post my question here, hope I could get some help.

wow, many, many, many.... and many thanks!
Just add a tiny modify to check out the Batch_type
doc_id = (select batch_id from gme_batch_header where batch_no='&batch_number' and batch_type = 0)
Because the batch_no can be duplicated as we also create Batch and Filrm Planned Order.
Many thanks for your support!
P/S: Sorry for my terrible English :P

How can I get the items gride of MIRO trx?

Similar Messages

Maybe you are looking for