How can i get the parameters in SICF gui config(or internet service)?

hey, budies,
the parameters of SICF gui config and internet service , both look the same.
but how can i get all ?
i just know these like:
~THEME
~TRANSACTION
~SOURCES
~ITSMOBILE
i mean i want to know the explanations for each parameter, then i can use it better,
thx

Hi,
This is a useful starting point re ITSMobile parameters
http://wiki.scn.sap.com/wiki/x/POk
Regards,
Oisin

Similar Messages

Shell script: How can i get the parameters of a command line?

Im a newbie. Help please!
For example my mini script test.sh
#!/bin/bash
echo all parameters: $*and now i run some test:
$ ./test.sh aa bb cc
all parameters: aa bb ccok!
$ ./test.sh aa bb $cc
all parameters: aa bbwhere is here $cc ?
$ ./test.sh aa $bb cc
all parameters: aa ccwhere is $bb ?
My question: How can i become 'aa $bb cc'? But without using of \ or ' or " like this:
./test.sh aa \$bb cc
or
./test.sh 'aa $bb cc'Many thanks!

This is exactly what i want! Why not?
It is possible to run a Linux command or bash script from SQLPlus.
It begin with "!" and the script can have parameter too!
You can say:
SQL>!ls
SQL> !ls -l /u01/app
It is possible, also i do it!
My script should have following functions:
- take the SQL statement from SQLPlus as paraameter,
- execute the SQL
- spool the result to a temp file.
- format the select result: elimnate unwanted the column spacing
- present again in SQLPlus
It look like this:
SQL>!do_select_format select * from v$logfile;do_select_format is the name of my script!
and i see somthing like this:
GROUP# STATUS TYPE   MEMBER                                     IS_
====== ====== ====== ========================================== ===
3             ONLINE +DATA/orcl/onlinelog/group_3.266.780357305 NO
3             ONLINE +DATA/orcl/onlinelog/group_3.267.780357305 YES
2             ONLINE +DATA/orcl/onlinelog/group_2.264.780357303 NO
2             ONLINE +DATA/orcl/onlinelog/group_2.265.780357303 YES
1             ONLINE +DATA/orcl/onlinelog/group_1.262.780357301 NO
1             ONLINE +DATA/orcl/onlinelog/group_1.263.780357303 YES
6 rows, 5 columns found!Note: i dont want to say: col format xxxx xxx ... before!
Edited by: DBA(t home) on May 8, 2012 4:44 AM
Edited by: DBA(t home) on May 8, 2012 4:46 AM

How can I get pubished parameters to display the available settings

how can I get pubished parameters to display the available settings?

according to the online help, I'm supposed to click on Title to get to the titles settings as follows
"Adjust a title’s settings
You can modify a title’s default settings in the Title inspector.
Select a title in the Timeline.
Choose Window > Show Inspector (or press Command-4), and click the Title button at the top of the pane that appears.
Adjust the available settings as needed.
Note: You can also keyframe many of the settings in both the Title and Text inspectors."
Gsoing to the Text inspector, there does not seem to be anything in the menu where I can change the color of the text. Based on the photo that appears with the above instructions --it appears the ability to change ink color is under the Published Parameters that is the menu I cannot get to 'drop'

How can i get the meta data from database?

Hi, all java and db experts,
I need to write a tool to generate java file which will be used to hold the resultset of a stored procedure of Oracle. Is there any API call or tools to connect to db and then get the meta data of the return cursor instead of reading stored procedure definition on my own?
Please help, thanks a lot.
Hanna

if i execute a Oracle stored procedure, the resultset of a cursor is returned. It's easy to know the meta data at the runtime.
However, could i get the meta data about the resultset of a cursor before runtime? Such as by connecting to the database and ask it about meta data of a specified stored procedure?
Is it feasible?
DatabaseMetaData dbmd = conn.getMetaData();
ResultSet rs = dbmd.getProcedureColumns("", "%", "SP_NAME", "%");
while (rs.next()) {
String colName = rs.getString(4);
int colType = rs.getInt(5);
int colDataType = rs.getInt(6);
int colPrecision = rs.getInt(8);
int colLen = rs.getInt(9);
int colScale = rs.getInt(10);
long defaultValue = rs.getLong(11);
But what i get is a list of stored procedure parameters. In oracle, cursor is IN OUT parameter . How can i get the meta data about the resultset of cursor?

How can I get the edited value from the editor in JTable

I have a JTextField added as an editor to a cell in JTable.
I value gets changed when I press enter.
but in actionPerformed of the JTextField when I say
String txtEditorValue = txtEditor.getText();
I am getting the old value. How can I get the edited value? Thanks.

Hi,
I guess, your understanding of how JTable works together with its models is not good enough - for example the method getTableCellEditorComponent(...) of the TableCellEditor interface is used to get the component, that should be used as editing component - its second parameter is a value that should be used to setup the editing component - it is normally not the editing component itself.
JTable uses an underlying TableModel to store the cell values - if you have edited a cell, JTable gets the value of the editing component by itself and stores it in the TableModel using its setValueAt(...) method. To retrieve this data you only need to query the TableModel using row and column of this cell as parameters
say jt is your JTable, and row and column are the row and column of the cell - so to get the value, simply use
Object obj = jt.getModel().getValueAt(row,column);
if you know, that there is a String in this cell use
String str = (String) jt.getModel().getValueAt(row,column);
The editor component is used for the view of the JTable - you only want the data, which is stored in the model - you don't have to deal with the GUI components in this case.
greetings Marsian

How can I get the XML structure from a flat structure?

Hi all,
in my XI SP 12 I use a JMS adapter to read information using the WebSphereMQ transport protocol.
The structure that I receive have this format:
<Name_A.KeyFieldValue><Name_A.fieldName_A1_Value>...<Name_A.fieldName_AN_Value>
<NumberRecordType_B><NumberRecordType_c>
<Name_B.KeyFieldValue><Name_B.fieldName_B1_Value>...<Name_B.fieldName_BN_Value>
<Name_B.KeyFieldValue><Name_B.fieldName_B1_Value>...<Name_B.fieldName_BN_Value>
<Name_C.KeyFieldValue><Name_C.fieldName_C1_Value>...<Name_C.fieldName_CN_Value>
<Name_C.KeyFieldValue><Name_C.fieldName_C1_Value>...<Name_C.fieldName_CN_Value>
the problem is that in this structure each line is not separated by a carriage return or a comma, I have all the information in a single line:
<Name_A.KeyFieldValue><Name_A.fieldName_A1_Value>...<Name_A.fieldName_AN_Value><NumberRecordType_B><NumberRecordType_c><Name_B.KeyFieldValue><Name_B.fieldName_B1_Value>...<Name_B.fieldName_BN_Value>...<Name_B.KeyFieldValue><Name_B.fieldName_B1_Value>...<Name_B.fieldName_BN_Value><Name_C.KeyFieldValue><Name_C.fieldName_C1_Value>...<Name_C.fieldName_CN_Value>...<Name_C.KeyFieldValue><Name_C.fieldName_C1_Value>...<Name_C.fieldName_CN_Value>
and the customer don't want to insert a line separator.
Then, the question is:
How can I get the XML structure from this structure?
If possible, I don't want to develop new Module and add it in the JMS Module Sequence.
PS I have already read the article "How to Use the Content Conversion Module with the XI 3 J2EE JMS Adapter.pdf" and it doesn't seem to help me.
Best Regards,
Paolo

To get context parameters from your web.xml file you can simply get the ActionServlet object from an implementing action object class. In the perform (or execute) method make the following call.
ServletContext context = getServlet().getServletContext();
String tempContextVar =
context.getInitParameter("<your context param >");

I would like to read a text file in which the decimal numbers are using dots instead of commas. Is there a way of converting this in labVIEW, or how can I get the program to enterpret the figures in the correct way?

The program doest enterpret my figures from the text file in the correct way since the numbers contain dots instead of commas. Is there a way to fix this in labVIEW, or do I have to change the files before reading them in the program? Thanks beforehend!

You must go in the labview option menu, you can select 'use the local
separator' in the front side submenu (LV6i).
If you use the "From Exponential/Fract/Eng" vi, you are able to select this
opton (with a boolean) without changing the labview parameters.
(sorry for my english)
Lange Jerome
FRANCE
"Nina" a ecrit dans le message news:
[email protected]..
> I would like to read a text file in which the decimal numbers are
> using dots instead of commas. Is there a way of converting this in
> labVIEW, or how can I get the program to enterpret the figures in the
> correct way?
>
> The program doest enterpret my figures from the text file in the
> correct way since the numbers contain dots instea
d of commas. Is there
> a way to fix this in labVIEW, or do I have to change the files before
> reading them in the program? Thanks beforehend!

How can I get the Task information..? Remedy for error "-200089"

Hello,
I am using PCI-6229 for the application, and VB6 for application development.
We have a policy to create the tasks and associated channels using Measurement and Automation Explorer.
I want to know can I retrieve the information of the tasks those are created ..
When my VB program starts, I use DAQmxLoadTask function to start executing the task, but for this I need to know the TASKNAME. On site if the service engineer accidentally renames the task name, the program stops execution. To avoid this problem, i would like to know how can I get the information about the tasks, such as the tasks those are created, their names, type of channels used (i/ps, o/ps, Analog channels), etc.
This would help my application to execute without hard coding the task names as well as I can close the tasks if they are running before exiting the application.
Also, while developing the application, it happens that the application crashes, and the tasks remain open and running. After I fix the error and execute the program, the application reports the error, "-200089 Task Name specified conflicts with an existing task name". To recover from this error, I need to restart the PC, which is most frustrating and time consuming. If I could know the tasks and task handles those are already created and running, I can safely delete them or continue using them.
I would appreciate if you could help me in resolving this problem.
Thank and regards,
Kunalb

Hi Kunalb,
To read the tasks currently configured on the system you can use this function: DAQmxGetSysTasks. This will return an array of the tasks on the system. In that same section of the DAQmx C Reference Help they talk about obtaining the other parameters you mention.
Another solution would be to add security to MAX such that only engineers with proper permissions could launch and/or modify the tasks. This can be done with Windows XP in the properties of a file.
I hope these suggestions help! Have a great weekend.
Best regards,
MatthewW
Applications Engineer
National Instruments
Message Edited by Matthew W on 08-10-2007 02:13 PM
Attachments:
DAQmxTasks.JPG ‏97 KB

How can i get the list of all tcode used by user of particular module

Hi,
How can i get the list of all tcode used by user of particular module (e.g FI , MM ,PP) within year .
Regards
Vikram

Login to your SAP System
Run TCode SE16
Type Table Name : TSTCT
Press F7 Key (Table Contents )
Go to Settings in menu bar
Select User Parameters
Under Keyword select Field Label and press green check mark
Select your criteria in Data Browser and execute
You will see all t codes in there
Regards,
Yogesh

How can I get the orclownerguid (unique user number) in Java Portlet?

Hi,
I find a unique number for each portal user in OID, it calls orclownerguid.
And I try to obtain this number in my portlet Java with the JPDK.
How can I get the orclownerguid in Java Portlet with JPDK?
thanks
regards
jerome laforge

Hello,
I just realized that I missunderstood your question.
We have several way to pass (and send) parameter to a portlet:
- OracleAS Portal page parameters that allow the browser user to define the way the parameter is send to the portlet
- generic URL parameter (public parameters)
- private paramter (a parameter that is targetted to a single portlet instance)
In you case, you can use public parameter, but you have to explicitly says that your portlet consume URL parameters, so set the passAllUrlParams tag to true in the provider.xml file.
Also I invite you to read the sample we have in the PDK that show how to use private parameter and page/portlet parameters, and the associated articles you can find on http://portalstudio.oracle.com
Regards
Tugdual Grall

I am having macbook air recently my iphotos did not open and was showing report apple and reopen but i came to know that by pressing alt and iphotos i open an new photo library and stored the pics but now how can i get the pics which i had in the earlier

i am having macbook air recently my iphotos did not open and was showing report apple and reopen but i came to know that by pressing alt and iphotos i open an new photo library and stored the pics but now how can i get the pics which i had in the earlier photo please help me to recover my photos

Well I'll guess you're using iPhoto 11:
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

How can i get the all values from the Property file to Hashtable?

how can i get the all values from the Property file to Hashtable?
ok,consider my property file name is pro.PROPERTIES
and it contain
8326=sun developer
4306=sun java developer
3943=java developer
how can i get the all keys & values from the pro.PROPERTIES to hashtable
plz help guys..............

The Properties class is already a subclass of Hashtable. So if you have a Properties object, you already have a Hashtable. So all you need to do is the first part of that:Properties props = new Properties();
InputStream is = new FileInputStream("tivoli.properties");
props.load(is);

I accidentally erased a music album that I purchased on iTunes. How can I get the iTunes store to recognize that it is no longer in my iTunes library and download it again?

I accidentally erased a music album that I purchased on iTunes. How can I get the iTunes store to recognize that it is no longer in my iTunes library and download it again?

Delete the broken links in iTunes then look at your purchased list to redownload.
If this happened because you were deleting files from the iTunes folder in Finder, don't. You have to let iTunes do all the deleting and moving or you will end up with broken links.

How can I get the iCloud/iTunes password for my (now) deceased Father-in-Law's Imac? I have a list of his passwords, but nothing works!

How can I get the iCloud/iTunes password for my (now) deceased Father-in-Law's iMac? I have a list of his passwords, but nothing works! I know his email, but that account has been cancelled for security purposes, so we can't just request a new one. I tried his security questions to no avail.
Thanks

Since that password is tied to his Apple ID, you will need to contact Apple; as far as I know, it will be a somewhat lengthy procedure and you will need to furnish necessary paperwork (including a death certificate as far as I know). Best to either stop at an Apple store or call them to find out exactly what it is you need to do.

I deleted a calendar tab. How can I get the data back?

I accidently deleted the calendar tab of my wife and deleted all her apoointments on her iphone and the iMac. I am in ****. How can I get the calendar data back=?

Sync is only oneway, from PC to your device. Unless you have the music on your PC, iTunes is going to wipe out what you have on your device if you are syncing to a new library.
You can only transfer Purchased music over to Itunes on your PC.
iTunes Store: Transferring purchases from your iOS device or iPod to a computer
http://support.apple.com/kb/HT1848
As for you own music, you may have to use a third party software. A good Free one is called Sharepod which you can download from Download.com here:
http://download.cnet.com/SharePod/3000-2141_4-10794489.html?tag=mncol;2

How can i get the parameters in SICF gui config(or internet service)?

Similar Messages

Maybe you are looking for