How can I implement form version control?

Hello.
Is there any way to monitor and control the different versions of a form? Any suggestions?

Each time you save a form into the repository, it automatically creates a new version. If you right click on the form, it will provide a UI for seeing and manipulating those versions.
Howard
http://www.avoka.com

Similar Messages

We have a requirement to print the w2 forms for employees using java application, how can i implement this. Please give some suggestion.

We have a requirement to print the w2 forms for employees using java application, how can i implement this. Please give some suggestion.

Anyone any ideas to help please?

How can I implement recipe control concept in SAPME?

Dears,
How can I implement recipe control concept in SAPME?
For example,
We can config the standard temperature setting needs to be between 100~120 degree C for Operation OP1 and Material MA1
So, before user start the SFC of MA1 at OP1, system can display the config values(100~120) for user reference, then, user need to input the real temperature when process the SFC, if it's out of spec, system can warning. System will collect the input data for analysis in future.
Thank you.

Thank you for your information.
Since customer prefer to use a custom UI which can communicate with SAPME by web service.
So I can not use SAPME default data collection or work instruction user interface.
I'm considering by using data collection and work instruction config data to develop a web service in MII and poblish to custom UI in which it can display the spec data and reject user's input if out of spec.
Please feel free to inform me if any other good idea, thanks!

How can I create multiple versions of a video within the same project?

OK...this is a probably a very basic question but I'm not sure how to word it clearly.
How can I create multiple versions of a video within the same project? What I mean is that I have a bout 50 minutes of video and I want to make two DVDs using different clips from this original 50 minutes of footage. It would be a real pain to have to re-import the video AGAIN for the second DVD. I suppose I could drop anything I don't want to burn to DVD back into the clips pane but that would wipe out all my transitions wouldn't it? I want to save each project in their “raw” form so I can burn additional DVDs later otherwise I would just do them one at a time and not care about one of them being destroyed.
Wow...that was a mess. Does anyone understand what the heck I’m asking? I hope so.

How can I create multiple versions of a video within the same project?
You can't. You make separate projects using the same or different clips, segments, transitions, titles, etc. You can even duplicate the first project and then modify/make the desired changes in the duplicated project. Each project can then be burned as a different DVD or as different titles on the same DVD if there is enough room.

How can I use the versionning tool to make a coherent solution to export

how can I use the versionning tool to make a coherent solution to export all objects used in my project to other db schema for testing as well as for implementation .
I want to know proper steps to Import/export objects.
while I am exporting my Master repository and work repository then again importing the all , no problem comes all the physical logical schema mapping and mapping between interfaces retains but
while I am trying to export and import one or two packages on the ease of testing then I am getting so many mismatches manually I am setting all why so?
required ur suggestion
Palash Chatterjee

kelly-bot wrote:
Thanks for the tip, but like I said, I dont want to always have to use the arrow keys. Is it not possible to actually DRAG one pixel at a time? I recently upgraded to CC from CS3 and I keep running into things that feel like a downgrade. Super disappointed.
Our posts overlapped there. Are you saying you could reliably drag one pixel with CS3?
What other issues are you having? Things like the Crop tool can feel strange at first, but I promise you you'll never want to use Classic mode once you get used to it.

How can I implement a comfirmation window when closing javafx application?

hi,guys
I'd like to add a confirmation window when user is closing my javafx application,if user click yes, I will close the application,if no ,I wouldn't close it ,how can I implement this function?
primaryStage.setOnCloseRequest(new EventHandler<WindowEvent>(){
               @Override
               public void handle(WindowEvent arg0) {
                    try
                         //todo
                    catch(Exception ex)
                         System.out.print(ex.getMessage()+"\r\n");
        });

Hi. Here is an example:
import javafx.event.ActionEvent;
import javafx.event.EventHandler;
import javafx.geometry.Pos;
import javafx.stage.*;
import javafx.scene.*;
import javafx.scene.paint.Color;
import javafx.scene.layout.*;
import javafx.scene.control.*;
public class ModalDialog {
    public ModalDialog(final Stage stg) {
     final Stage stage = new Stage();
        //Initialize the Stage with type of modal
        stage.initModality(Modality.APPLICATION_MODAL);
        //Set the owner of the Stage
        stage.initOwner(stg);
        Group group = new Group();
        HBox hb = new HBox();
         hb.setSpacing(20);
        hb.setAlignment(Pos.CENTER);
        Label label = new Label("You are about to close \n your application: ");
        Button no = new Button("No");
        no.setOnAction(new EventHandler<ActionEvent>() {
            public void handle(ActionEvent event) {
                   stage.hide();
        Button yes = new Button("Yes");
        yes.setOnAction(new EventHandler<ActionEvent>() {
            public void handle(ActionEvent event) {
                   stg.close();
         hb.getChildren().addAll(yes, no);
         VBox vb = new VBox();
         vb.setSpacing(20);
         vb.setAlignment(Pos.CENTER);
         vb.getChildren().addAll(label,hb);
        stage.setTitle("Closing ...");
        stage.setScene(new Scene( vb, 260, 110, Color.LIGHTCYAN));
        stage.show();
}Test:
   import javafx.application.Application;
import javafx.event.ActionEvent;
import javafx.event.EventHandler;
import javafx.scene.Group;
import javafx.scene.Scene;
import javafx.scene.control.Button;
import javafx.scene.paint.Color;
import javafx.stage.Stage;
import javafx.stage.*;
* @author Shakir
public class ModalTest extends Application {
     * @param args the command line arguments
    public static void main(String[] args) {
        Application.launch(ModalTest.class, args);
    @Override
    public void start(final Stage primaryStage) {
        primaryStage.setTitle("Hello World");
        Group root = new Group();
        Scene scene = new Scene(root, 300, 250, Color.LIGHTGREEN);
       primaryStage.setOnCloseRequest(new EventHandler<WindowEvent>(){
               @Override
               public void handle(WindowEvent arg0) {
                                arg0.consume();
                    try
                     ModalDialog md = new ModalDialog(primaryStage);
                    catch(Exception ex)
                         System.out.print(ex.getMessage()+"\r\n");
        primaryStage.setScene(scene);
        primaryStage.show();
}

How can I implement a Digital I/O counter with a maximum source frequency of 80 MHz (like 6602 board) using CompactRIO?

How can I implement a Digital I/O counter with a maximum source frequency of 80 MHz (like 6602 board) using CompactRIO? It appears as if the Digital I/O modules for CompactRIO are much slower than this.
Thank you,
--Ray

Hi Ray,
The highest frequency input we offer for C Series modules is 20 MHz if you are doing LVTTL and 10 MHz for 5 V TTL. These modules are the 9402 and 9401, respectively. Unfortunately, there is no 80 MHz input on this form-factor.
Regards,
Chris E.
Applications Engineer
National Instruments
http://www.ni.com/support

How can I obtain a version of Print Studio Pro that works with Photoshop Elements 13 (64 bit)?

How can I obtain a version of Print Studio Pro that works with Photoshop Elements 13 (64 bit)? The advertising refers to Print Studio Pro 2 but all I find available to download is version 1.35.

Thanks - I did notice that the 2 was a superscript on one site but on another (I think the one for the Pro-10 printer) it was definitely a 2 in line with the rest of the text and separated by a space (at least on my browser). At any rate, I suspected something of the kind and will simply use Photoshop Elements 11 when I want a pattern print until the change is made.
If you have an inside line to Canon you might also suggest some changes to their Image Garden program, specifically its handling of DVD label projects. It has several themes and within each theme several layouts. As far as they go these are fine but they do not give nearly enough flexibility. The boxes for insertion of images are useful as is the simple procedure for rescaling the image so it is cropped in varying ways while staying within the fixed box. However, it should be possible (a) to relocate the boxes on the page and (b) to resize and reshape the boxes - probably by a control which would become available by right-clicking on the box. For example, there are times when the user might want to include a full 16 x 9 frame shot as one of the images, and in general the aspect ratios of the provided boxes do not permit this.
I have over the years preferred to use Word for this purpose after setting up masks to expose just the printable area of the DVD or Blu-ray disc, setting up the margins so that the center of the disc is in the horizontal center of the page, and finally introducing text and pictures and adjusting the font size of blank lines above the disc to line everything up properly in the vertical direction. A typical layout might involve one large picture, located so the center hole and the curved outer edge do not block anything important, or two pictures side by side, or four pictures centered vertically (to minimize the effect of the outer edge of the disc) but possibly of different widths (so as to make both close-ups and wide scenes optimal on the same disc label). The text then goes above and below the pictures. All of this works perfectly so I probably wouldn't use Image Garden very often for this purpose, but the inability to resize and relocate the boxes must be very limiting for others as well.
Some of the layouts have image locations severely reduced by the edge of the disc.
As I said ... if you have an inside line to Canon .. but if not, please excuse the length of this post!

How can i submit form-data with acrobat pocket pc

how can i submit form-data (http-post) on a PPC?
how can i store the data offline?
which submit-functions are availabe for the pocket pc reader?
do i need ARES?
where can i find a documentation of of the available functions for the ppc version?
where can i fond form-samples for ppc?
from the docu on my pocket pc:
Submit form data using handheld devices over a wireless connection. If you are working offline, the data is temporarily stored, then submitted once a connection is established. Send forms by e-mail or directly to the destination server using a cradle or cable

To your question regarding the Pocket PC version of Reader, I downloaded Adobe Reader for Pocket Pc 2 and installed it on my HP iPAQ . I then loaded my test PDF file onto the iPAQ. The Reader for Pocket PC preformed an email submission fine. However, I received no indication that anything happened when I tried an HTTP Post. So I think you can only do an email submission.
In general, I have been testing to see how much I can do without the Live Cycle Reader Extensions, since for sure I will never be able to purchase them. What I have found is that for Acrobat Reader 7, the email submission works for all of the people I have asked to test it, but the HTTP Post has worked for only one of the two people who have tested it so far with Reader 7 (the one for which it worked claims that he only has Reader 7 on his computernot Acrobat).

How can I check the version of Oracle in Linux?

Dear all :
How can I check the version of Oracle in Linux ?
Regards
Terry

Hi terry;
How can I check the version of Oracle in Linux ?You mean your db version or something else? If you mean you want to control your version issue is:
source env file as oramgr
sqlplus "/as sysdba"
when u login sqlplus it will give u something as below:
SQL*Plus: Release 10.2.0.4.0 - Production on
Regard
Helios

How can i add form of my own to "SAPM07DR"

i been asked to add form develop by me to the standart program "SAPM07DR" .
this task came from the need of the implementation
of the "material management" , assign forms and program.
now i get the output "ZWE4" ,
and i want to assign form of my own ,
i tried to add smart form but i get message
"Errors occurred while processing output"
so I want to try layout with standard program "SAPM07DR" .
how can i add form of my own to this program

First, you must copy this program to your own program with "ZSAPM07DR" then copy the include program where the routine pass through the program
example: entry_we03 -> from include M07DRENT and M07DRAUS
         change this include to ZM07DRENT and ZM07DRAUS
The next step is binding your form in the program.
what forms do you use ? Sapscript or Smartforms ?
in this Program already used Sapscript. You can See there is Open_Form Function in that Program.
I suggest you to Bind Smartforms.
IF you use smartforms, Remark All Statement from
"PERFORM open_form_sammel." to "PERFORM close_form." before endform
that perform including in M07DRAUS -> FORM lesen_wes USING objky lgortsplit.
after that put this program to replace the remark :
data : FMNAME type RS38L_FNAM.
DATA: ls_control_param      TYPE ssfctrlop.
set preview parameters
      MOVE 'X' TO ls_control_param-no_dialog.
      MOVE 'X' TO ls_control_param-preview.
      MOVE 'PRINTER' TO ls_control_param-device.
*break-point.
*****Print SmartForms
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
        EXPORTING
          FORMNAME           = TNAPR-SFORM
        IMPORTING
          FM_NAME            = FMNAME
        EXCEPTIONS
          NO_FORM            = 1
          NO_FUNCTION_MODULE = 2
          OTHERS             = 3.
     CALL FUNCTION FMNAME
     EXPORTING
         control_parameters   = ls_control_param
     TABLES
         traptab           = traptab
     EXCEPTIONS
         formatting_error = 1
         internal_error   = 2
         send_error       = 3.
     if sy-subrc NE 0.
*******message 'Error' type 'S'.
     endif.
*******End Smartforms
Hope This Help...

How can I implement this database?

Okay, so if you are working with a company who owns more than 10 apartment complexes and they have asked you to build a database.
So if I want to implement this database.
What database software package should I use (SQL Enterprise or SQL Data Center) (do not know the difference between the two) or is there any other SQL version that can be used/considered
Also what else would I have to build or buy? What combination of things do I need?
What hardware is needed at each apartment complex?
I was told that something off the shelf will not give me everything I need.

Please do not duplicate posts. You already posted it here
https://social.msdn.microsoft.com/Forums/sqlserver/en-US/5dfc3897-3ffb-490b-8e60-e775b43d3303/how-can-i-implement-this-database?forum=sqlgetstarted
Andy Tauber
Data Architect
The Vancouver Clinic
Website | LinkedIn
This posting is provided "AS IS" with no warranties, and confers no rights. Please remember to click
"Mark as Answer" and
"Vote as Helpful" on posts that help you. This can be beneficial to other community members reading the thread.

How can I implement data type map?

The getString() method of java.sql.ResultSet interface is not efficient enough.
I want to map any data type to VARCHAR type,then use the getBytes() method to get the value.
How can I implement it.
I know proc can implement it, simply set selda->T[sli] with 1 for any field.

Hello,
What's your LabVIEW version ? Do you have a simple example program which demonstrates this behavior ?
I found another discussions related to your issues with Xcontrols:
updating type defs in Xcontrol Facade
No Data Change event generated for a XControl in a Type Def
XControl facede.vi
Hope this helps.
Regards,
Steve M.
National Instruments France
#adMrkt{text-align: center;font-size:11px; font-weight: bold;} #adMrkt a {text-decoration: none;} #adMrkt a:hover{font-size: 9px;} #adMrkt a span{display: none;} #adMrkt a:hover span{display: block;}
>> Vidéo-t'chats de l'été : présentations techniques et ingénieurs pour répondre à vos questions

How can be implemented a Timer?

Hi,
I have this simple question:
- How can I implement a timer?
The current SOA palette in JDeveloper doesn't provide any Timer action.
This would be very useful to have. Is the Oracle SOA team planning to implement a timer control in JDeveloper?
Thanks
Alexandru

Alexandru,
I think that in this release you need to implement a timer by yourself. You can use Quartz, the EJB Timer, or the OC4?J scheduler, or an external scheduler.
I think that in future releases there is a plan to add such a feature, but I'm not sure.
~ronen

How can I have 2 versions of Numbers but only 1 app? Read

This is the weirdest thing I ever saw. It's driving me crazy and making me look like fool.
In an earlier post I mentioned that something happened to my numbers. The window looked very different from this afternoon when I created 2 new spread-sheets. I must have sounded crazy to qinn below in my answer.
Now I clicked the Numbers icon in the dock and it opened to my original Numbers 09 (2.3). So I tried to open a sheet I created a few hours ago and it says I can't open that file, I need a later version of Numbers. OMG
Just a though so I opened the finder, went to the applications folder and I only have ONE Numbers.app. So I clicked on that and low-and-behold the new 3.2.2 opened!!!!!!!
How can I have 2 versions of numbers but only one app???? I thought I was going crazy. Now I know something isn't right.
HELP PLEASE!!!
Allen

Hi Allen,
Look in your Applications folder for an other folder "iWork '09".
Breathe.
Know that you are not alone. Wayne made a user tip and it is not just for you.
Need newer version of Numbers to open file
quinn

How can I implement form version control?

Similar Messages

Maybe you are looking for