How can I improve performance when scopes are open?

How can I improve performance when scopes are open?
When Color correcting, performance severely lags, stalls, freezes!
Nothing to complex...simple 3 way color corrector, occasional curves filters.
I am constantly waiting for the timeline to update as I move around....sometimes as long as a minute or so.
I'm on brand new 2.7 Ghz 12-Core MacPro with 64 GB of RAM
Thanks in advance.
Jay

http://forums.adobe.com/thread/1369260?tstart=0

Similar Messages

How can I improve performance for BC4J/JSP-application

Hi,
I have developed a JSP-Applikcation with the master-detail views. This Application has been implemented
as SSO enabled web portlet into portal. Whenn I click on a row retrieved from the master view (Master.jsp), it take 15 seconds
until the associated data in detail view will be displayed on the other window(Detail.jsp). The master table has about 2500 records and detail table about 7000. (Other case: it takes 2 seconds for 162 rows (master) and 228 rows (detail) respectively)
In Master.jsp I set rangesize = "10" to reduce data loading time.
======================== master.jsp =================================
<jbo:DataSource id="dsMaster appid=testAppId viewobject="MaterView" rangesize="10">
<a href="detail.jsp?RowKeyValue=<jbo:ShowValue datasource="dsMaster" dataitem="RowKey"/>">
Here Click
</a>
==================================================================
Because all records from master view have firstly to be retrieved to locate right row, I set rangesize="-1" in detail.jsp. Consequently this leads to a lower performance.
When rangesize="20" sets instead rangesize="-1", The performance is good, but the wanted Data from detail view are not displayed if the records of master view cliked on ist not in this range.
======================== detail.jsp ======================================
<jbo:DataSource id="dsMaster appid=testAppId viewobject="MaterView" rangesize="-1">
<jbo:RefreshDataSource datasource="dsMaster">
<jbo:Row id="msRow" datasource="dsMaster" action="Find" rowkeyparam="RowkeyValue">
<jbo:dataSource id="dsDetail" appid="testAppId viewobject="DetailView">
======================================================================
Is my programming logic not to be suited for the high performance?
How can I improve the performance, if it is so?
Many thanks for your help.
regards,
Yoo

http://forums.adobe.com/thread/1369260?tstart=0

How can we improve performance while selection production orders from resb

Dear all,
there is a performance issue in a report which compares sales order and production order.
Below is the code, in this while reading production order data from resb with the below select statement.
can any body tell me how can we improve the performance? should we use indexing, if yes how to use indexing.
*read sales order data
SELECT vbeln posnr arktx zz_cl zz_qty
INTO (itab-vbeln, itab-sposnr, itab-arktx, itab-zz_cl, itab-zz_qty)
FROM vbap
WHERE vbeln = p_vbeln
AND   uepos = p_posnr.
    itab-so_qty = itab-zz_cl * itab-zz_qty / 1000.
    CONCATENATE itab-vbeln itab-sposnr
       INTO itab-document SEPARATED BY '/'.
    CLEAR total_pro.
**read production order data*
    SELECT aufnr posnr roms1 roanz
    INTO (itab-aufnr, itab-pposnr, itab-roms1, itab-roanz)
    FROM resb
    WHERE kdauf = p_vbeln
    AND   ablad = itab-sposnr+2.

Himanshu,
Put a break point before these two select statements and execute in the production.This way you will come to know which select statement is taking much time to get executed.
In both the select statements the where clause is not having the primary keys.
Coming to the point of selecting the data from vbap do check the SAP note no:-185530 accordigly modify the select statement.
As far as the table RESB is concerened here also the where clause doesn't have the primary keys.Do check the SAP Note No:-187906.
I guess not using primary keys is maring the performance.
K.Kiran.

How to improve performance when there are many TextBlocks in ItemsControl items?

Hi,
I'm trying to find a way to improve performance for a situation when there is an ItemsControl using UI and Data virtualization and each item on that control has 36 TextBlocks. Basically the item is a single string. There are so many TextBlocks
to allow assigning different brushes to different parts of the string. Performance of this construction is terrible. I have 37 items visible on the screen and if I try to scroll up or down it scrolls into the black space and then it takes a second or two to
show the items.
I tried different things. For example, the most successful performance-wise was to replace TextBlocks with Borders and then draw bitmaps. In other words, I prepared 127 bitmaps for each character (I need ASCII only) and then I used those bitmaps
to set Border.Backgrounds. It improved performance about 1.5 - 2 times but it consumed much more memory (which is not surprising, of course). Required amount of memory is so big that it throws OutOfMemoryException on 512MB emulator but works on 1GB. As a result
I don't thing it is a good solution.
Another thing that worked perfect is to replace 36 TextBlocks with only 6 TextBlocks. In this case the performance improvement is about 5 - 10 times but I lose the ability to set different colors to different parts of the string. It seems that
the performance degrades dramatically with the increase of number of TextBlocks. Is there another technique to draw strings where literally each character can be of different color with decent performance?
Thank you
Alex

Using Runs inside TextBlocks gives approximately the same improvement as using bitmaps 1.5 - 2 times faster but it is not even close to the case with just a couple of TextBlocks in the ItemsControl item. Any other ideas?
Alex

Utl_raw.bit_and - how can I improve performance of this query?

Hi all
Hugely grateful for any light anyone can shed.
I need to do bit AND operations on 128 bit numbers and I'm stuck in Oracle 10g.
10g provides a very nice bitand() function that can be applied to numbers but it only works up to 64 bit numbers (actually only 62 I think because it needs a couple of bits)
So I've been looking at using the utl_raw.bit_and function. It works very well, except that I'm encountering a massive performance hit, which hopefully is in the way I'm using it, rather than intrinsic to the speed at which utl_raw.bit_and itself performs..
With numbers, I do a query like this:
select count(1) from offer_a where bitand(bit_column, 51432) = 51432
With utl_raw.bit_and (and 16-byte RAW column), I am passing in a hex value (may not be the best thing? Would passing in binary be better?) and doing my query like this:
select count(1) from offer_a where utl_raw.bit_and(bit_column,hextoraw('00000000000000000020008000002ca1')) = hextoraw('00000000000000000020008000002ca1');
One million rows using bitand takes about a second, using utl_raw.bit_and like this takes 25 seconds or so!!! Hopefully it's something in the way I'm calling it, and there's a faster way?
Thank you!
Jake

Hmm.. Actually it may not be that simple.
I had created an index on the number column that oracle seems to consistently use if I do a query like:
select count(1) from scott.offer_b where
current_price >= 0 and
bitand(current_price, 9008574719100165) = 9008574719100165
(without the >= oracle seems to do a full table scan. The reason I created the index is that there's other columns in the data table, making larger blocks. I figured that an index, even though most of needs to be scanned, would be faster because I can cram many more rows into each block..?).
But if I drop the index on the number column, it takes about 12 secs/1m rows, in other words about half the time of the utl_raw.bit_and().
So it's possible that bitand on 64 bits takes about half the time of utl_raw.bit_and on 128 bits, which is very reasonable..
So maybe the real problem I have is why oracle is not using the equivalent index that I placed on the RAW column when I do:
select count(1) from scott.offer_b where
hex_bit_sig >= '00000000000000000020008000002ca1' and
utl_raw.bit_and(hex_bit_sig,'00000000000000000020008000002ca1') = '00000000000000000020008000002ca1';
(By the way I realized that I don't need to use the hextoraw - seems like just putting a hex number in '' is the right way to specify a raw anyway?)
So yes, I think that's the real problem - how can I get oracle to use the index I created on the RAW value

How can I improve performance of macbook air

My MacBook Air seems ti be running slow: Slow to start up, slow to start new programs, slow when running multiple tasks at the same time.
Here's how my machine is set up:
Processor 1.86 GHz Intel Core 2 Duo
Memory 2 GB 1067 MHz DDR3
OSX 10.8.2
Any suggestions or is this what i can expect?
Thanks for any help.
-PR

Things You Can Do To Resolve Slow Downs
If your computer seems to be running slower here are some things you can do:
Start with a visit to: OS X Maintenance - MacAttorney.
Boot into Safe Mode then repair your hard drive and permissions:
Repair the Hard Drive and Permissions Pre-Lion
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
Repair the Hard Drive - Lion
Boot from your Lion Recovery HD. When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Restart your computer normally and see if this has helped any. Next do some maintenance:
Suggestions for OS X Maintenance
For situations Disk Utility cannot handle the best third-party utility is Disk Warrior; DW only fixes problems with the disk directory, but most disk problems are caused by directory corruption; Disk Warrior 4.x is now Intel Mac compatible.
OS X performs certain maintenance functions that are scheduled to occur on a daily, weekly, or monthly period. The maintenance scripts run in the early AM only if the computer is turned on 24/7 (no sleep.) If this isn't the case, then an excellent solution is to download and install a shareware utility such as Macaroni, JAW PseudoAnacron, or Anacron that will automate the maintenance activity regardless of whether the computer is turned off or asleep. Dependence upon third-party utilities to run the periodic maintenance scripts was significantly reduced since Tiger. These utilities have limited or no functionality with Snow Leopard or Lion and should not be installed.
OS X automatically defragments files less than 20 MBs in size, so unless you have a disk full of very large files there's little need for defragmenting the hard drive. As for virus protection there are few if any such animals affecting OS X. You can protect the computer easily using the freeware Open Source virus protection software ClamXAV. Personally I would avoid most commercial anti-virus software because of their potential for causing problems. For more about malware see Macintosh Virus Guide.
I would also recommend downloading a utility such as TinkerTool System, OnyX 2.4.3, or Cocktail 5.1.1 that you can use for periodic maintenance such as removing old log files and archives, clearing caches, etc.
For emergency repairs install the freeware utility Applejack. If you cannot start up in OS X, you may be able to start in single-user mode from which you can run Applejack to do a whole set of repair and maintenance routines from the command line. Note that AppleJack 1.5 is required for Leopard. AppleJack 1.6 is compatible with Snow Leopard. There is no confirmation that this version also works with Lion.
When you install any new system software or updates be sure to repair the hard drive and permissions beforehand.
Get an external Firewire drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
1. Carbon Copy Cloner
2. Data Backup
3. Deja Vu
4. SuperDuper!
5. SyncTwoFolders
6. Synk Pro
7. Synk Standard
8. Tri-Backup
Visit The XLab FAQs and read the FAQs on maintenance, optimization, virus protection, and backup and restore.
Additional suggestions will be found in Mac maintenance Quick Assist.
Referenced software can be found at CNet Downloads or MacUpdate.
Additional Hints
Be sure you have an adequate amount of RAM installed for the number of applications you run concurrently. Be sure you leave a minimum of 10% of the hard drive's capacity as free space.
Add more RAM. If your computer has less than 2 GBs of RAM and you are using OS X Leopard or later, then you can do with more RAM. Snow Leopard and Lion work much better with 4 GBs of RAM than their system minimums. The more concurrent applications you tend to use the more RAM you should have.
Always maintain at least 15 GBs or 10% of your hard drive's capacity as free space, whichever is greater. OS X is frequently accessing your hard drive, so providing adequate free space will keep things from slowing down.
Check for applications that may be hogging the CPU:
Open Activity Monitor in the Utilities folder. Select All Processes from the Processes dropdown menu. Click twice on the CPU% column header to display in descending order. If you find a process using a large amount of CPU time, then select the process and click on the Quit icon in the toolbar. Click on the Force Quit button to kill the process. See if that helps. Be sure to note the name of the runaway process so you can track down the cause of the problem.
Often this problem occurs because of a corrupted cache or preferences file or an attempt to write to a corrupted log file.

How can I improve performance over a Branch Office IPsec vpn tunnel between and SA540 and an SA520

Hello,
I just deployed one Cisco SA540 and three SA520s.
The SA540 is at the Main Site.
The three SA520s are the the spoke sites.
Main Site:
Downstream Speed: 32 Mbps
Upstream Speed: 9.4 Mbps
Spoke Site#1:
Downstream Speed: 3.6 Mbps
Upstream Speed: 7.2 Mbps (yes, the US is faster than the DS at the time the speed test was taken).
The SA tunnels are "Established"
I see packets being tranmsitted and received.
Pinging across the tunnel has an average speed of 32 ms (which is good).
DNS resolves names to ip addresses flawlessly and quickly across the Inter-network.
But it takes from 10 to 15 minutes to log on to the domain from the Spoke Site#1 to the Main Site across the vpn tunnel.
It takes about 15 minutes to print across the vpn tunnel.
The remedy this, we have implemented Terminal Services across the Internet.
Printing takes about 1 minute over the Terminal Service Connection, while it takes about 15 minutes over the VPN.
Logging on to the network takes about 10 minutes over the vpn tunnel.
Using an LOB application takes about 2 minutes per transaction across the vpn tunnel; it takes seconds using Terminal Services.
I have used ASAs before in other implementation without any issues at all.
I am wondering if I replaced the SAs with ASAs, that they may fix my problem.
I wanted to go Small Business Pro, to take advantage of the promotions and because I am a Select Certified Partner, but from my experience, these SA vpn tunnels are unuseable.
I opened a case with Small Business Support on Friday evening, but they couldnt even figure out how to rename an IKE Policy Name (I figured out that you had to delete the IKE Policy; you cannot rename them once they are created).
Maybe the night weekend shift has a skeleton crew, and the best engineers are available at that time or something....i dont know.
I just know that my experience with the Cisco TAC has been great for the last 10 years.
My short experience with the Cisco Small Business Support Center has not been as great at all.
Bottom Line:
I am going to open another case with the Day Shift tomorrow and see if they can find a way to speed things up.
Now this is not just happening between the Main Site and Spoke Site #1 above. It is also happeninng between the Main Site and Spoke #2 (I think Spoke#2 has a Download Speed of about 3Mbps and and Upload Speed of about 0.5 Mbps.
Please help.
I would hate to dismiss SA5xx series without making sure it is not just a simple configuration setting.

Hi Anthony,
I agree!. My partner wants to just replace the SA5xxs with ASAs, as we have never had problems with ASA vpn performance.
But I want to know WHY this is happening too.
I will definitely run a sniffer trace to see what is happening.
Here are some other things I have learned from the Cisco Small Business Support Center (except for Item 1 which I learned from you!)
1. Upgrade the SA540 at the Main Site to 2.1.45.
2a. For cable connections, use the standard MTU of 1500 bytes.
2.b For DSL, use the following command to determine the largets MTU that will be sent without packet fragmentation:
ping -f -l packetsize
Perform the items below to see if this increases performance:
I was told by the Cisco Small Business Support Center that setting up a Manual Policy is not recommended; I am not sure why they stated this.
3a. Lower the IKE encryption algorithm from "AES-128" to DES.
3b. Lower the IKE authentication algorithm to MD5
3c. Also do the above for the VPN Policy
Any input is welcome!

Join taking lot of time.? How can we improve performance?

Hi,
I am having tow sources SRC_A and SRC_B.
I am applying full outer join between the 2 sources.
Here SRC_A contains 2 fields. It contains 8 Crore records.
and SRC_B contains 2 fields. It contains 8 Crore records.
I am having temp table space is of 500 GB. and Undo Table space is of 250GB.
I am getting Roll back segment error.
It didn't insert a single recornd in the target table.
Could anyone please suggest me?
Am I missing anything? What all things I can do to improve the performance.
Thank you,
Regards,
Gowtham Sen.

you need to provide your oracle version, ora-xxxxx error code, formatted([ pre ] tags) source code and explain plan output at least to get more help here.
alter session set statistics_level = all ;
explain plan set statement_id = 'demo' into plan_table for SELECT ..
SELECT PLAN_TABLE_OUTPUT FROM TABLE(dbms_xplan.display_cursor(null, null, 'allstats last'));here are some examples.
http://psoug.org/reference/explain_plan.html
http://coskan.wordpress.com/2007/03/04/viewing-explain-plan/
Also autotrace option or sql trace+tkprof will provide the informations needed.
http://www.bhatipoglu.com/entry/17/oracle-performance-analysis-tracing-and-performance-evaluation
If this is a snapshot too old error please mention undo management settings.

How can i improve performance of a horizontal parallax on an mobile device?

I've created a Horizontal Parallax website using Adobe Muse, and it works perfectly on a desktop machine, but as you use it on a mobile device such as an iPad, the performance becomes jerky and jumpy.
I added navigation buttons to jump to set keypoints, which again, work smoothly on a desktop, but then jump on a mobile device.
Is there any way to prevent this jumpy motion and make it more smooth?
Thanks in advance!

Its just scrolling images. A Horizontal Parallax, (the pages are placed in the project vertically, as suggested by adobe). There are no animated images, no videos either. All are just transparent PNGs with scroll effect attached.
It seems jumpy if you use it on the ipad, both through scrolling, but even worse if you use the navigation i've implemented, which is supposed to scroll to the anchor point.

How can I improve performance (image searching)

Hello,
My program makes many calls to a method that compares two images. It does this by using nested for-loops (one for x-pixel and one for y-pixel) to search through a BufferedImage image and use getRGB() to compare pixel-by-pixel to see if the two images are the same.
I've added a little bit of "optimisation" that first compares the central 5-pixles (the 5 pixels in an "X" shape in the middle of each image), and will only continue to search pixel-by-pixel if those are shown to be the same.
Of course, both searches (the optimisation-pre-search and the pixel-by-pixel search) will quit out of the loops and return false as soon as one non-matching pixel is found.
The problem is that it has to do this millions of times. For every single pixel in the source image, it has to go through one-by-one and compare, starting with the "optimised" speedy-compare and then moving on.

Try this:
public static boolean areImagesIdentical(File file1, File file2) throws IOException {
          // Safe to do this?
          if(file1.getAbsolutePath().equals(file2.getAbsolutePath())) {
               System.out.println("files are same - same path");
               return true;
          if(file1.length() != file2.length()) {
               System.out.println("files are different, different file size");
               return false;
          BufferedImage image1 = ImageIO.read(file1);
          BufferedImage image2 = ImageIO.read(file2);
          if(image1.getHeight() != image2.getHeight() || image1.getWidth() != image2.getWidth()) {
               System.out.println("files are different, different height or width");
               return false;
          // Take 10 pixels from anywhere in each image
          for(int i=0; i<10; i++) {
               int x = (int) (Math.random() * image1.getWidth());
               int y = (int) (Math.random() * image1.getHeight());
               if(image1.getRGB(x, y) != image2.getRGB(x, y)) {
                    return false;
          int[] image1AllRGBs = image1.getRGB(0, 0, image1.getWidth(), image1.getHeight(), null, 0, image1.getWidth());
          int[] image2AllRGBs = image2.getRGB(0, 0, image2.getWidth(), image2.getHeight(), null, 0, image2.getWidth());
          return Arrays.equals(image1AllRGBs, image2AllRGBs);
     }

How can I improve performance on my iPad 1. I am having problems with apps closing unexpectedly and also with slow response.

My iPad 1 has become almost unusable apps crash without warning and the response time is very slow.

1. Close all inactive apps in the Task Bar. Double-click the Home button and hold apps down for a second or two. Tap the minus sign to close app.
2. Hold the Sleep and Home button down for about 10 seconds until you see the Apple Logo.

HT201365 How do you close your apps that are open

How can I close the apps that are open

Ive got a fix
Dubble click your home button and swipe the picture of the application up and not the icon
soo
Dubble click your home button ---> Find app you want to close --> Swipe up on picture of application
and it should be closed
Hows the batterylife like on your phone?

How can I flip my iphone videos on my PC? My videos from my iphone are horrible when I transfer them to my PC. How can I improve the video on my PC? Can I just convert the files to WMV? When the video plays the speed is off, it's half slow-motion

My videos from my iphone are horrible when I transfer them to my PC. How can I improve the video on my PC? Can I just convert the files to WMV? When the video plays the speed is off, it's half slow-motion and staggers into normal play. The clips are slightly cut as well, the clips do not roll continuously. I'm taling about videos that are no more than 2 minutes long. I'm frustrated and I could really use some advice-my kids basketball games is what I'm recording and I'm trying to send them to my family (they are not very tech savvy). Thanks

Not it's only function but one for which it was most admirably suited, which is why I really hope someone can find a work around. I am hoping my post to the Apple feedback may prompt a useful response from Apple and I live in hope that my post here will elicit a useful response from another user. I did not miss the the text at the top of the feedback form but you presumably missed my initial text, 'someone here can explain' or my subsequent 'work around from another user'
Just in case anyone reading this has a large collection of music videos, video podcasts or iTunes U then DO NOT upgrade your iPad to iOS 5. If you are considering purchasing the iPad as a useful mobile device to experience these media organised in your iTunes please don't as you will be wasting your money. (unless someone on this forum knows of a way to undo the mess created by those infallible folks at Apple)
Yes I know it does other things but the purpose I bought it for doesn't work anymore

How can I Improve the Performance using Global Temo Tables ??

Hi,
Can anyone tell me , How can i make use of Global Temporary Tables to improve the Performance.
I have few sample scripts ,
Say i have the View based on some Complex query like ,
CREATE OR REPLACE VIEW Profile_values_view AS
SELECT d.Profile_option_name, d.Profile_option_id, Profile_option_value,
u.User_name, Level_id, Level_code
FROM Profile_definitions d, Profile_values v, Profile_users u
WHERE d.Profile_option_id = v.Profile_option_id
AND ((Level_code = 'USER' AND Level_id = U.User_id) OR
(Level_code = 'DEPARTMENT' AND Level_id = U.Department_id) OR
(Level_code = 'SITE'))
AND NOT EXISTS (SELECT 1 FROM PROFILE_VALUES P
WHERE P.PROFILE_OPTION_ID = V.PROFILE_OPTION_ID
AND ((Level_code = 'USER' AND
level_id = u.User_id) OR
(Level_code = 'DEPARTMENT' AND
level_id = u.Department_id) OR
(Level_code = 'SITE'))
AND INSTR('USERDEPARTMENTSITE', v.Level_code) >
INSTR('USERDEPARTMENTSITE', p.Level_code));
Now i have created the Global temp Table as ,
CREATE GLOBAL TEMPORARY TABLE Profile_values_temp
Profile_option_name VARCHAR(60) NOT NULL,
Profile_option_id NUMBER(4) NOT NULL,
Profile_option_value VARCHAR2(20) NOT NULL,
Level_code VARCHAR2(10) ,
Level_id NUMBER(4) ,
CONSTRAINT Profile_values_temp_pk
PRIMARY KEY (Profile_option_id)
) ON COMMIT PRESERVE ROWS ORGANIZATION INDEX;
Now I am Inserting the Records into Temp table as
INSERT INTO Profile_values_temp
(Profile_option_name, Profile_option_id, Profile_option_value,
Level_code, Level_id)
SELECT Profile_option_name, Profile_option_id, Profile_option_value,
Level_code, Level_id
FROM Profile_values_view;
COMMIT;
Now what my doubt is, when do i need to execute the Insert Statement.
Say , if the View returns few millions of records , then loading such a data into Global Temporary table takes lot of time.
Then what is the use of Global Temporary tables and how can i improve the Performance using the same.
Raj

Thanks for the responce ,
There are 2 to 3 complex views in our database, and there always be more than 5000+ users will be workinf on the application and is OLTP application. Those complex views are killing the application performance.
I what i felt was, if i create the Global Temporary tables for thow views and will be able to load the one third million of records returned by the views in to cache and can improve the application performance.
I have created the Global Temporary tables for 2 views with the option On Commit Preserve , But after am inserting the records into the Temp table and when i Issue the commit statement, the Temp table is getting Cleared.
I really got surpised of this behaviour as i know that with the Option On Commit Preserve , the rows should retain in the Temp Table, Instead , it's getting cleared.
Pelase suggest , what to do ??
Raj

How can I improve below SQL performance.

Hi,
How can I improve below SQL performance. This SQL consumes CPU and occures wait events. It is running every 10 seconds. When I look at the session information from Enterprise Manager I can see that "Histogram for Wait Event: PX Deq Credit: send blkd"
I created some indexes. I heard that the indexes are not used when there is a NULL but when I checked the xecution plan It uses index.
SELECT i.ID
FROM EXPRESS.invoices i
WHERE i.nbr IS NOT NULL
AND i.EXTRACT_BATCH IS NULL
AND i.SUB_TYPE='COD'
Explain Plan from Toad
SELECT STATEMENT CHOOSECost: 77 Bytes: 6,98 Cardinality: 349
     4 PX COORDINATOR
          3 PX SEND QC (RANDOM) SYS.:TQ10000 Cost: 77 Bytes: 6,98 Cardinality: 349
               2 PX BLOCK ITERATOR Cost: 77 Bytes: 6,98 Cardinality: 349
                    1 INDEX FAST FULL SCAN INDEX EXPRESS.INVC_TRANS_INDX Cost: 77 Bytes: 6,98 Cardinality: 349
Execution Plan from Sqlplus
| Id | Operation | Name | Rows | Bytes | Cost | TQ |IN-OUT| PQ Distrib |
| 0 | SELECT STATEMENT | | 349 | 6980 | 77 | | | |
| 1 | PX COORDINATOR | | | | | | | |
| 2 | PX SEND QC (RANDOM) | :TQ10000 | 349 | 6980 | 77 | Q1,00 | P->S | QC (RAND) |
| 3 | PX BLOCK ITERATOR | | 349 | 6980 | 77 | Q1,00 | PCWC | |
|* 4 | INDEX FAST FULL SCAN| INVC_TRANS_INDX | 349 | 6980 | 77 | Q1,00 | PCWP | |
Predicate Information (identified by operation id):
4 - filter("I"."NBR" IS NOT NULL AND "I"."EXTRACT_BATCH" IS NULL AND "I"."SUB_TYPE"='COD')
Note
- 'PLAN_TABLE' is old version
- cpu costing is off (consider enabling it)
Statistics
141 recursive calls
0 db block gets
5568 consistent gets
0 physical reads
0 redo size
319 bytes sent via SQL*Net to client
458 bytes received via SQL*Net from client
1 SQL*Net roundtrips to/from client
1 sorts (memory)
0 sorts (disk)
0 rows processed
Instance Efficiency Percentages (Target 100%)
Buffer Nowait %: 100.00
Redo NoWait %: 100.00
Buffer Hit %: 99.70
In-memory Sort %: 100.00
Library Hit %: 99.81
Soft Parse %: 99.77
Execute to Parse %: 63.56
Latch Hit %: 90.07
Parse CPU to Parse Elapsd %: 0.81
% Non-Parse CPU: 98.88
Top 5 Timed Events
Event     Waits     Time(s)     Avg Wait(ms)     % Total Call Time     Wait Class
latch: library cache     12,626     16,757     1,327     62.6     Concurrency
CPU time          5,712          21.Mar
latch: session allocation     1,848,987     1,99     1     07.Nis     Other
PX Deq Credit: send blkd     1,242,265     981     1     03.Tem     Other
PX qref latch     1,405,819     726     1     02.Tem     Other
The database version is 10.2.0.1 but we haven't installed the patch 10.2.0.5. yet.
I am waiting your comments.
Thanks in advance

Welcome to the forum.
I created some indexes. I heard that the indexes are not used when there is a NULL but when I checked the xecution plan It uses index. What columns are indexed?
And what do:
select i.sub_type
,      count(*)
from   express.invoices i
where i.nbr is not null
and    i.extract_batch is null
group by i.sub_type; and
select i.sub_type
,      count(*)
from   express.invoices i
group by i.sub_type; return?
Also, try use the {noformat}{noformat} tag when posting examples/execution plans etc.
See: HOW TO: Post a SQL statement tuning request - template posting for more tuning instructions.
It'll make a big difference:
SELECT i.ID
FROM EXPRESS.invoices i
WHERE i.nbr IS NOT NULL
AND i.EXTRACT_BATCH IS NULL
AND i.SUB_TYPE='COD'
Explain Plan from Toad
SELECT STATEMENT CHOOSECost: 77 Bytes: 6,98 Cardinality: 349
     4 PX COORDINATOR
          3 PX SEND QC (RANDOM) SYS.:TQ10000 Cost: 77 Bytes: 6,98 Cardinality: 349
               2 PX BLOCK ITERATOR Cost: 77 Bytes: 6,98 Cardinality: 349
                    1 INDEX FAST FULL SCAN INDEX EXPRESS.INVC_TRANS_INDX Cost: 77 Bytes: 6,98 Cardinality: 349
Execution Plan from Sqlplus
| Id | Operation | Name | Rows | Bytes | Cost | TQ |IN-OUT| PQ Distrib |
| 0 | SELECT STATEMENT | | 349 | 6980 | 77 | | | |
| 1 | PX COORDINATOR | | | | | | | |
| 2 | PX SEND QC (RANDOM) | :TQ10000 | 349 | 6980 | 77 | Q1,00 | P->S | QC (RAND) |
| 3 | PX BLOCK ITERATOR | | 349 | 6980 | 77 | Q1,00 | PCWC | |
|* 4 | INDEX FAST FULL SCAN| INVC_TRANS_INDX | 349 | 6980 | 77 | Q1,00 | PCWP | |
Predicate Information (identified by operation id):
4 - filter("I"."NBR" IS NOT NULL AND "I"."EXTRACT_BATCH" IS NULL AND "I"."SUB_TYPE"='COD')
Note
- 'PLAN_TABLE' is old version
- cpu costing is off (consider enabling it)
Statistics
141 recursive calls
0 db block gets
5568 consistent gets
0 physical reads
0 redo size
319 bytes sent via SQL*Net to client
458 bytes received via SQL*Net from client
1 SQL*Net roundtrips to/from client
1 sorts (memory)
0 sorts (disk)
0 rows processed
Instance Efficiency Percentages (Target 100%)
Buffer Nowait %: 100.00
Redo NoWait %: 100.00
Buffer Hit %: 99.70
In-memory Sort %: 100.00
Library Hit %: 99.81
Soft Parse %: 99.77
Execute to Parse %: 63.56
Latch Hit %: 90.07
Parse CPU to Parse Elapsd %: 0.81
% Non-Parse CPU: 98.88
Top 5 Timed Events
Event     Waits     Time(s)     Avg Wait(ms)     % Total Call Time     Wait Class
latch: library cache     12,626     16,757     1,327     62.6     Concurrency
CPU time          5,712          21.Mar
latch: session allocation     1,848,987     1,99     1     07.Nis     Other
PX Deq Credit: send blkd     1,242,265     981     1     03.Tem     Other
PX qref latch     1,405,819     726     1     02.Tem     Other

How can I improve performance when scopes are open?

Similar Messages

Maybe you are looking for