How can I isolate individual noise sources in a noise analysis simulation?

When I do an noise analysis simulation I can get a total RMS value for the band simulated, or I can get a spectral plot.
Is there any way to identify each noise source in the simulation and it's contribution to the overall output noise?
I tried a sensitivity simulation and selected all variables for output and that may have given some of the info I am looking for.  Is that correct?  Or does it not include any of the noise sources that are present in the noise analysis?
Thanks.

Noise at the specified output node is the RMS sum of the contribution of all the noise sources multiplied by their respective gains between the sources and output.  To zero in on the most significant noise contributing sources you need to be able to see that summation before it just becomes one RMS number.  This could be done by turning on/off each noise source and re-running the simulation.  This would actually be a very easy thing to provide for the developers who have access to the source code that runs this simulation.
I don't see a way to do that as it is, or to get any other form of a report of the various noise source contributions to the output.  -Unless selecting each noise source for output does that, but I would like to confirm if this is true or not.  What I don't want is to get the total noise at each of those source nodes as if they were the output instead of at the actual output node desired.  Is that a correct understanding of how this is implemented?
I'm hoping I am wrong and the output will be as seen at the actual circuit output rather than at each source.  That would be the useful way to have it work.
Now that I think about it I suppose I could create a simulation to test this, if there is no answer from other sources.
Thanks.

Similar Messages

  • If I have two email accounts, one personal hotmail account and one MS Exchange work account, how can I setup individual notifications for each account. Right now, any email from any account has the same notification. I want work to be different than perso

    If I have two email accounts, one personal hotmail account and one MS Exchange work account on my iPhone 4s, How can I setup individual notifications for each account? Fore example, if I get a work email, I want to hear a DING, DING....If I get a personal email, I want to hear a BEEP, BEEP. Right now, any email from any account has the same notification. I want work incoming email notification to be different than personal incoming notification. The only semi-workaround I've seen is just disable any notification for the Hotmail account, so only work emails would notify. But then I don't know when I get a personal email. Even the lowely Blackberry Torch 9800 has this feature..not iPhone 4s??
    Thanks

    Sorry you get only one notification sound for all email accounts.  you can send a suggestion to apple here http://www.apple.com/feedback/

  • How can I share a *.java source file across multiple projects in NetBeans?

    I'm sure this simple and a pretty common operation but how can I share a *.java source file across multiple projects in NetBeans? Right now I keep cut, coping and pasting the same source file between multiple projects to re-use the same code. But I could I make this source file a library file or something like that so that I could access it from any project. I assume this would be a generic operation but I mentioned NetBeans for clarity. Thanks.

    fiebigc wrote:
    I know I mentioned NetBeans but I'm most interested in the generic method for creating a library of source files that I can call into whatever program I am developing. I've done such a thing in C using header files and such but I'm trying to get a direction on how this is accomplished in Java. I'm sorry if I could edit the title I would. If anyone wants to be specific about NetBeans I welcome that too.
    Edited by: fiebigc on Jun 20, 2008 5:57 PM
    >I know I mentioned NetBeans but I'm most interested in the generic method for creating a library of source files that I can call into whatever program I am developing. I've done such a thing in C using header files and such but I'm trying to get a direction on how this is accomplished in Java. I'm sorry if I could edit the title I would. If anyone wants to be specific about NetBeans I welcome that too.
    Edited by: fiebigc on Jun 20, 2008 5:57 PM
    Create a class library.
    Write your code, compile it to .class files, put those class files in a .jar file and include the jar file in the classpath whenever you want to compile a project against it.

  • How can i lookup a data source v5 in WSAD 5.1?

    Hi all,
    I'm using WSAD 5.1 to developer a web application based on J2EE 1.3 that have a simple java classes. My application uses a data source version 5 to have access the database. I?m using service locator pattern to lookup a JNDI but it dont work properly on stand alone java classes, only on EJB components.
    How can i lookup a data source version 5 from my java class on WSAD 5.1?
    Can anyone help?
    Thanks,

    Oh I did not realize that you were talking about a stand-alone application. You cannot use the server datasources in your stand-alone application.
    You can use the Oracle helper classes to construct a DataSource on the client side.
    http://java.sun.com/j2se/1.4.2/docs/api/javax/sql/DataSource.html and driver specific documentation to achieve this. I will try to send a few links, if I find any.
    In a stand-alone application, you can use some connection pooling mechanism on your own.
    The ideal thing to do is to keep your data access in your middle tier (EJBs) and call the EJB's. This way you can reuse things in multiple client tiers and use the container provided datasource and connection pooling mechanisms.
    Hope this helps.
    Vijay

  • How can I convert my Open Source document files into Word document files? I cannot download Pages since my Macbook Air does not have the most recent software.

    How can I convert my Open Source document files into Word document files? I cannot download Pages since my Macbook Air does not have the most recent software. I downloaded open office to my mac to try and save money. It worked well for a while. Now I get this pop-up message that asks me to "Reopen" and when I select the option, nothing happens. I cannot save my documents anymore and I cannot convert them to word. Help!

    dwb wrote:
    Does OpenOffice output Word documents by default or do you have to select it manually?
    You have 17 options to save as in Open Office, one of which is .doc  files,  yes it needs to be saved manually.
    You may be able to default to DOC, but have not tried same.
    Since Open Office is 99% same as Word, I use it, or Word, either one.  Open Office is a bit less buggy than Word 11'

  • How can I remove individual songs from my iphone 5?

    How can I remove individual songs from my iphone 5? Right now, all 2013 songs are syncing. I thought that unchecking the songs in the main itunes playlist would remove them form all devices. Apparently this does not work. Under the uphone 5 sync menu there are no selections for individual songs... only groups of songs. Am I missing something?

    I just create a playlist and sync only this playlist.
    Then just add/remove from this playlist and sync.
    Unchecking songs does other thing such as not playing them in iTunes, not syncing them to other devices and not applying changes

  • How can we create a data source on structures

    Hi,
       How can we create a data source on structures.
    Regs,
    abdul

    Abdul,
        Welcome to SDN!
        We can't create Datasource using Strcutres. We need to have base tables.
        For Function Module Extractors, we will create strctures. We will use these strctures as Extract Structures. But, we will get the data from Base tables only not from Strcutures.
    Strctures won't contain data.
    all the best.
    Regards,
    Nagesh Ganisetti.

  • How can we call java control source methods within jsp

    Hi guys!
              How can we access java control source methods that are defined in java control projects within jsp.I am getting error when I tried to call java control source's methods in scriptlet of JSP page.Any help/suggestion is appreciated.
              Thanks
              -Chandu

    Uh, what?
    (And you are sure that it's not a Weblogic-specific question?)

  • How can we prevent viewing the source code  of JSP by the user

    Dear sirs,
    how can we prevent viewing the source code by the user ( from the browser for the Viwe Sorce option) for a JSP file that use struts frame work.
    infact i don't wan the user to view the javascript that in incorporated in the JSP for various purpose...
    thanks and regards...
    Sudheesh K S
    INDIA

    Dear sirs,
    how can we prevent viewing the source code by the
    user ( from the browser for the Viwe Sorce option)
    for a JSP file that use struts frame work.
    infact i don't wan the user to view the javascript
    that in incorporated in the JSP for various
    purpose...
    thanks and regards...
    Sudheesh K S
    INDIAJSP and Servlets are programs/scripts that run on the server. The user/clients only sees the HTML output generated by the server. If you want to hide JavaScript from casual users then you can put the JavaScript code in a seperate file. This file can however be read from the Cache.

  • How can I isolate iPad apps so only the ones I want people to use are visible to them?

    Hello. How can I isolate iPad apps so only the ones I want people to use are visible to them?

    At the moment it's not possible, but you could try providing feedback to Apple here http://www.apple.com/feedback/ipad.html (this has come up a few times so you won't be the first person to request it).
    An alternative if you only want your customers to have access to only one app, is to look for cases that prevent access to the home button so that they can't get access to the home screen and therefore other apps. e.g. http://www.staypad.com/photos.html is a mounted case for use on walls/tables etc (there are probably others available, that is just the first one that my search found).

  • TabbedPanels Tab - How can we put individual images on each tab button?

    Hi,
    How can we put individual propeties (like size, background images etc) in each tab button of TabbedPanels Tab?
    Thanks

    Wow ! Itz amazing !! .... This is what 'm exactly looking for
    Thanks a lot Gramps
    Alin

  • How can I get the NotePad source..

    Hi. there.
    I am thinking about printing with java web start.
    There is A Simple NotePad demo in Java Webstart demo page.(http://java.sun.com/products/javawebstart/demos.html)
    It present how a sandboxed application can save and load files, print, and access the clipboard in a safe and secure manner using the JNLP API.
    I can't find the source at this site.
    How can I get the NotePad source..
    Please help me...

    I have not seen any demo source.
    However under the developer's section on http://java.sun.com/products/javawebstart there is a developers guide, which contains some snippets about how to use the clipboard and printing services.
    If you plan to sign your jar, you won't have to use these
    services.
    Regards,
    Marc

  • How can I download the full source code for the Java 3D package

    how can I download the full source code for javax.media.j3d
    especially I need the Transform3D.java class.
    thanks a lot
    Meir

    thank you guys I'll try to do so, I suggest you to
    join me.From the one of the (ex-!)Java3D team:
    "I'm glad to see that Sun has decided to officially support an
    open source Java/OpenGL binding, JOGL. Perhaps they will
    eventually decide to make Java 3D open source. However, be
    careful what you wish for. The Java 3D source is huge and
    complex. There are native sections for Solaris, Windows/OpenGL,
    and Windows/Direct3D, plus common code. I don't know how you'd
    open source a build process that requires different pieces of
    the code be built on different machines running different
    operating systems."
    Sounds scary - I hope we're ready for it :)

  • How can I get the XSLT source code?

    How can I get the XSLT source code?

    Actually, I want to parse customer reviews for academic purpose.
    I'm trying to follow the links in the customer reviews zone.
    For example:
    In the following page
    http://www.amazon.com/gp/product/customer-reviews/B000LU8A7E/sr=1-1/qid=1180473311/ref=cm_cr_dp_all_helpful/102-2890495-8864146?ie=UTF8&n=1065836&qid=1180473311&sr=1-1#customerReviews
    in the "customer reviews" section, there is a link "next" that gets the next 10 reviews.
    The thing is that I don't know how to imitate its action using java and actually, I'm not sure if it is possible to do that using software.
    I tried to look at the source code that I got using the previous java code I posted and I see that the next link always has the following href attributes "http://www.amazon.com/gp/product/customer-reviews/B000LU8A7E"
    I tried to see if there is any javascript that tells the page which 10 reviews to get but with no success.
    So if anyone knows how to imitate the next link action using software that will sure help me a lot.
    Thanks in advance

  • CSS SSL Proxy - how can I write the original source address in http header

    I'm replacing some BigIP's with CSS11500's that are configured to do front/backend ssl proxying in a one-armed configuration. The BigIP's write the original source IP address as a http header value when the traffic is sent to the application, and the application uses the IP to match against an application ACL. How can I do the same in the CSS.
    thanks,
    Brian

    here is what you can insert with the SSL module :
    http://www.cisco.com/en/US/products/hw/contnetw/ps792/products_configuration_guide_chapter09186a0080292a76.html#wp1027619
    Gilles.

Maybe you are looking for