How can I keep my restrictions on my ipad will still restoring it. I ask this because you can easily restore the ipad which disables restrictions. Is there a way to always have restrictions on even in restoring it?
How can I keep restrictions on my ipad. I know that if you restore the ipad as new then the password and restrictions gets disabled. Is there a way to constantly keep restrictions on the ipad even with someone restores it as new or restores it in general
If it's restored to a backup, and the restrictions were in place when the backup was made, then they will be kept (they will effectively be copied back on from the backup). Restoring to factory defaults/as new will remove them and all other settings and content from the iPad, and you can't change that behaviour - one reason is that if you forget the restrictions code (and there are fairly regular postings on here from people who have) then the factory default reset then allows you to remove it.
Similar Messages
-
I want that line---file,edit,view,bookmarks,etc. to appear as soon as I begin. Thanks!!!
Press Alt+V
From the View menu select Toolbars
From there check the Menu Bar option.
Done! -
Is there a way to always have apple maps oriented northwards?
I don't like it when I use the map app that when its navagating it orients it forward as up. I like my maps and gps's to be northward up. I don't know how to change it or if its even possible.
On my iPhone 5 when I follow wjosten's recommendation, the arrow turns into a spotlight and in the upper right corner there is a compass needle (red for north). This may provide the directional information that you desire.
-
Is there a way not to have to chose an available server in the console when deploying an ejb?
Is there a way not to have to chose an available server in the console when deploying
an ejb? Everytime we deploy our beans we have to logon to the console select the
ejb and then chose a server under the tab targets? Can this be automated?You could try to select the target in the config.xml file, but this is
not recommended by BEA.
Nils
Fred Bloggs wrote:
>
Is there a way not to have to chose an available server in the console when deploying
an ejb? Everytime we deploy our beans we have to logon to the console select the
ejb and then chose a server under the tab targets? Can this be automated?--
============================
[email protected] -
my iphone 4 regularly gets stuck on the apple logo screen and stays there until it runs out of battery, and even during charging. what can i do? I have restored it, still it gets stuck on apple logo, anyone pls help.
Jai141 wrote:
... and im not sure as i brought the phone of someone else.. i will have to ask them
Good Luck.
Jai141 wrote:
Thanks
You're Welcome. -
I've been working on a newsletter and have the final version. But I wanted to check something in a verssion I did last week. If I choose the day in Time Machine, is there any way I can view that document without "restoring" it to replace the final version?
You can drag and drop a file from TM to the desktop.
Let's say your newsletter is on the desktop. First thing to do is to add something to the file name, say Newsletter_1.
Next open TM as if it is just another external drive by double clicking the icon. (This is not the same as "Enter Time Machine" which you do when you want to restore.) The file hierachy in TM follows the same logic as on your hard drive. Navigate to the date you want, find the file you want, and drag and drop it where you want it to be. Because you changed the name of the most recent version you can both files in the same space.
I do this often.
But remember if you make a back up now you will end up with both versions in TM. -
How can I keep my audio track, delete a short segment of video, and reinsert a new video clip, without changing the audio with the way it lines up with the original video?
If you have either iMovie 09 or iMovie 11 you can do this easily using the Cutaway feature.
Go to iMovie/Preferences and make sure that the Advanced Tools are enabled.
Now you jut drag and drop the 2nd clip onto hte first clip at the frame where you want the Cutaway to start. A popup menu will appear. Choose Cutaway.
Here is a good Tutorial.
If you have iMovie 08, let me know. There is a way to do it, but it is more complex. -
Tried updating my iPad wirelessly today. Process seemed to have gotten stuck and later wi fi crashed (in that order, I believe). Restarted iPad and got a picture of a wire leading to iTunes icon on the iPad screen. Nothing happens even when connected it to my Windows 8.1 PC, and iTunes doesn't seem to recognize the iPad.
Hello there, uromr.
The following Knowledge Base article provides some great troubleshooting steps for the issue you're having:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
If once the iPad is recognized, you still see the Connect to iTunes Screen, then this article provides some additional steps for updating your device:
If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
I have removed the passcode from my ipad but still it is getting locked after sometime what can be reason for this?
Can you pls guide that when I am restoring my ipad from itunes do i need to restore as new or from backup?????
Also is this problem realted to using same apple id for two ipad..... Pls help and regarding ur suggesting of messing with my ipad , I will keep a check .. -
i shifted from a windows to a mac.. I want to add songs to my ipod tpuch 4th gen.. but if i try to sync with itunes it says my songs will be replaced by the new songs.. Is there any way that i can have my previous data safe??
Your iPod can only be synced with one computer at a time. If you try to sync it with a new computer/iTunes library, it will replace the contents of the iPod with whatever is in the new library. You should probably disable the autosync functionality first by going to Edit -> Preferences, clicking the Devices tab, and enabling the prevent iPods,iPhones, and iPads from automatically syncing option.
Before doing anything else, authorize the new computer with your iTunes Account. In iTunes, choose Store -> Authorize This Computer and enter in the correct credentials. Either copy a backup file from your old computer to your new one or create a new backup of your iPod in iTunes before letting it sync.
Then right->click on your iPod Touch from under the Devices section in the left hand pane of iTunes and choose Backup. You might also want to take a look at this article to see what it all included in the backup.
iOS: How to back up
Now onto synced content such as music, videos, photos, etc. For iTunes purchases you can copy them back into iTunes by choosing File -> Transfer Purchases. For all other nonpurchased iTunes content, see this excellent user tip from another forum member turingtest2 outlining the different methods and software available to help you copy content from your iPod back to your PC and into iTunes.
Recovering your iTunes library from your iPod or iOS device
Once the backup has been made and all other synced content such as music, videos, and photos are back in your iTunes library, restore your iPod from that backup you made earlier. Here is more on backing up and restoring your iPod.
iTunes: Backing up, updating, and restoring iOS software
If you do happen to lose any purchased content, you can always redownload it from the iTunes Store again at no cost via iCloud. See this article for information.
Downloading past purchases from the App Store, iBookstore, and iTunes Store
B-rock -
i have to restore my phone from back up but in order to do it i had to update my software. now that my software is updated there isnt enough room on the phone to back up. is there a way to only restore certain things from the backup like contacts?
Because it says it's incompatible when it can't be, I got hope. I get error messages all the time with my iPod and iPhone that it cannot sync and that 'this device is not capapble of connecting to iTunes' stuff. I literally forget that happened, plug it in again and it works, I later realize that iTunes made a mistake, they do that.
-
I need to retrieve files from my iPad but I forgot my password. I tried to restore it but then it said I had to turn off Find my iPad on my iPad. I can't do this because I can't get into it. What do I do?
If the iPad was running iOS 7, iCloud: Find My iPhone Activation Lock in iOS 7
http://support.apple.com/kb/HT5818
How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
Cheers, Tom -
iPhoto has somehow uninstalled itself, or I've done something wrong. If I try to open iPhoto, it gives me this message: "You can't open the application "iPhoto" because it may be damaged or incomplete". I have an iMac OS X. How do I reinstall iPhoto please?
What is your iPhoto version and how did you install it originally?
If it came with a new mac and Lion or Mt. Lion installed, you can delete iPhoto from the Applications folder (don't empty the Trash) and download it again from the "Purchased" tab of the App Store.
If you have bought the iLife CD, reinstall iPhoto from the installation media, after deleting it from the Application folder.
Or if your Mac came with an older MacOS X, but iLIfe preinstalled, use the system Install CDs, see Terence Devlin's post here: Re: My iPhoto isn't working. Error message says "you can't open the app "iPhoto" because it may be damaged or incomplete.
Regards
Léonie
P.S: This may not only be a problem of a broken iPhoto. What did you do, directly before this happened? Did you run a program, that will clean the Mac to save space, like "Clean My Mac" or "Mac Keeper"? These little helpers can be risky and overdo it and remove too much. Then it might be safer to reinstall your system, because other essential files might be missing now. -
My IPad will not turn on despite charging all night and all day. The Apple pops on but then shuts off again. It does this over and over. How can I fix this and get it up and running again?
Hey bellabeanbag,
Thanks for the question. The following resource outlines troubleshooting steps if your iPad is not responding:
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
If iPad won't turn on, or the display stops responding
Follow these steps, testing after each:
1. Turn the iPad off and turn it on again. Press and hold the Sleep/Wake button on top of iPad for a few seconds, until a red slider appears. Then slide the slider. Then press and hold the Sleep/Wake button until the Apple logo appears.
2. Reset iPad. Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears.
If iPad still won't respond after you restore it
Follow these steps, testing after each:
1. If you receive an alert in iTunes while restoring your iPad, refer to this article for instructions on how to resolve common issues with updating and restoring.
2. If you cannot restore your iPad in iTunes, or if iTunes does not recognize the device, refer to this article for instructions on restoring using recovery mode.
Thanks,
Matt M. -
Okay, I keep getting this prompt That says "To view this context, you need to install the Java Runtime Environment...I believe I have clicked on the More Info link days ago..I believe this is malware..what do I do to get rid of this annoying pop-up? https://www.dropbox.com/s/gtm3khm6ngo0d26/Screenshot%202014-12-10%2019.56.56.png ?dl=0
jackallday wrote:
Kappy, got a page when I clicked saying it can't find the page and it looks like THIS https://www.dropbox.com/s/ldjyssatbmy53u0/Screenshot%202014-12-10%2021.28.24.png ?dl=0
Try http://support.apple.com/kb/DL1572
27" i7 iMac (Mid 2011) refurb, OS X Yo (10.10.1), Mavs, ML & SL, G4 450 MP w/10.5 & 9.2.2
Maybe you are looking for
-
Font profile doesn't work after updating to ios 7.1
Before updating to ios 7.1 I can see text written in unicode zawgyi font in applications by installing the font profile. But after 7.1, text written in zawgyi unicode font appears as ?????. Some said removing and reinstalling the profile may help b
-
Can somebody please tell me what Database is used in DMS? I understand that this is an appliance so please don't flame me. I have to answer this for a compliance issue with a hospital. Telling them that it is an appliance with a hardened database wil
-
Buttons have ceased to respond on Adobe Presenter 9
Having previously worked fine one of my colleagues is experiencing an issue with Presenter 9. He is using PowerPoint 2010. The buttons are showing on the ribbon but when selected nothing happens. For example he will click on the manage button on the
-
Drill in place concatenates multiple levels on x-axis label
Hi: OBIEE 11.1.1.6 I have a line view that shows product by month. When I drill down on a data point, the x-axis on the view repeats the month for each data point. For example, if I drill down on Oct-11, the x-axis will show Oct-11 1-Oct-2011, Oct-11
-
I downloaded an upgraded version and now my contacts are gone. How can I restore them?
I donwloaded an upgrade and now my contacts are gone. How do I restore them?