How can I know records is committed or un-committed

Hi Guys
Insert one record into DB without issue commit immediately, At same session,Another segment program,Using SQL or PL/SQL, How can I know records is committed or un-committed
Thanks
Pan
Edited by: Pan.Tian on May 31, 2012 8:45 PM

A session can never see another session's uncommitted rows. Oracle provides read consistency. This basically means that when your session starts to read data, at time1, Oracle provides you with "the truth" (committed rows) as it exists, at time1. Let's call this version 20 of the data.
Another session can change data. Commit. It can create new versions of the data. However, this does not impact what your session reads. It sees the rows as they were at time1 when your session started to read them. Your session reads version 20, irrespective if whether version 25 is currently the latest version of the data.
So there are no dirty reads in Oracle - and no way for your session to see the dirty and uncommitted data of another session. Or vice versa.
Of course, if you make changes in your session, then your session will see those uncommitted changes.
Read up on Multi-Version Concurrency Control (MVCC) and Multiversion Read Consistency (Oracle® Database Concepts guide).

Similar Messages

How Can I Know All History Record For Any Form ??

How Can I Know All History Record And Updates About Any Form By User Names And Times Or What About Log Files ??

Duplicate post.
How Can I Know All History Record For Any Form ??
Re: How Can I Know All History Record For Any Form ??

How can we know the return code of BDC Program ?

Hi All,
Please tell me : How can we know the return code of BDC Program when being exceuted in Session or in Transaction mode.
In my program, we are uploading data from Excel sheet to SAP via BDC
The records that are not updated we want to create a log file.
Now to know whether a record is updated ot not, wat syst field shloud be used?
Its urgent....
Reward Point will be there ....
Thanks,
Harish

Hi harish,
try the logic in this code ...
i had attached input file in the end.
TYPES: begin of errmess,
 msgnr type t100-msgnr,
 text type t100-text,
 end of errmess.
TABLES : t100.
DATA: BEGIN OF DD_VA01,
 AUART TYPE VBAK-AUART,
 KUNNR TYPE RV45A-KUNNR,
 BSTKD TYPE VBKD-BSTKD,
 MABNR TYPE RV45A-MABNR,
 KWMENG(2) type C,
 KBETR(2) type C,
 END OF DD_VA01.
DATA:IT_VA01 Like TABLE OF DD_VA01,
 WA_VA01 Like LINE OF IT_VA01,
 WA_VA01_F Like LINE OF IT_VA01,
 IT_BDCDATA TYPE TABLE OF BDCDATA,
 WA_BDCDATA Like Line OF IT_BDCDATA,
 W_FNAME TYPE STRING,
 messtab like bdcmsgcoll occurs 0 with header line,
 it_errmess type table of errmess,
 wa_errmess like line of it_errmess,
 err_message type string.
data: zf1 type i,
 zc1 type c value '2',
 fn(20) type c.
Main Code ************************************************************
PERFORM get_input using 'C:\Documents and Settings\ic881592\Desktop\Daran_bdc_VA01-e.txt'.
SORT IT_VA01 BY AUART KUNNR BSTKD.
LOOP AT IT_VA01 INTO WA_VA01.
if WA_VA01_F-AUART <> WA_VA01-AUART OR
 WA_VA01_F-KUNNR <> WA_VA01-KUNNR OR
 WA_VA01_F-BSTKD <> WA_VA01-BSTKD.
 PERFORM set_header_flag.
 PERFORM create_bdc_header_data.
endif.
PERFORM create_bdc_item_data.
ENDLOOP.
PERFORM call_transaction.
PERFORM errorlog.
Procedures ***********************************************************
form get_input using w_fname.
CALL FUNCTION 'GUI_UPLOAD'
 EXPORTING
 FILENAME = W_FNAME
 HAS_FIELD_SEPARATOR = '#'
 TABLES
 DATA_TAB = IT_VA01.
endform.
form call_transaction.
 PERFORM bdc_field using 'BDC_OKCODE' '/11'.
 CALL TRANSACTION 'VA01' USING IT_BDCDATA MODE 'A' messages into messtab.
 refresh it_bdcdata.
endform.
FORM set_header_flag.
 WA_VA01_F-AUART = WA_VA01-AUART.
 WA_VA01_F-KUNNR = WA_VA01-KUNNR.
 WA_VA01_F-BSTKD = WA_VA01-BSTKD.
 if zf1 = 1.
 PERFORM call_transaction.
 endif.
 zf1 = 1.
endform. "set_header_flag.
form create_bdc_header_data.
 perform bdc_dynpro using 'SAPMV45A' '0101'.
 perform bdc_field using 'VBAK-AUART' WA_VA01-AUART.
 perform bdc_field using 'BDC_OKCODE' '/00'.
 perform bdc_dynpro using 'SAPMV45A' '4001'.
 perform bdc_field using 'KUAGV-KUNNR' WA_VA01-KUNNR.
 perform bdc_field using 'VBKD-BSTKD' WA_VA01-BSTKD.
 perform bdc_field using 'BDC_OKCODE' '/00'.
 perform bdc_dynpro using 'SAPMSSY0' '0120'.
 perform bdc_field using 'BDC_CURSOR' '04/06'.
 perform bdc_field using 'BDC_OKCODE' '=CHOO'.
 perform bdc_dynpro using 'SAPMV45A' '4001'.
 PERFORM bdc_field USING 'BDC_OKCODE' '=POAN'.
endform. "create_bdcdata
FORM create_bdc_item_data.
 CONCATENATE 'RV45A-KWMENG(' zc1 ')' INTO FN.
 perform bdc_field using 'BDC_CURSOR' FN.
 perform bdc_field using FN WA_VA01-KWMENG.
 CONCATENATE 'KOMV-KBETR(' zc1 ')' INTO FN.
 perform bdc_field using FN WA_VA01-KBETR.
 CONCATENATE 'RV45A-MABNR(' zc1 ')' INTO FN.
 perform bdc_field using FN WA_VA01-MABNR.
 perform bdc_dynpro using 'SAPMV45A' '4001'.
 PERFORM bdc_field USING 'BDC_OKCODE' '=POAN'.
ENDFORM.
form errorlog.
LOOP AT MESSTAB .
 if MESSTAB-MSGNR = '311' or MESSTAB-MSGTYP = 'E'.
 SELECT SINGLE msgnr text FROM T100
 into wa_errmess
 WHERE SPRSL = MESSTAB-MSGSPRA
 AND ARBGB = MESSTAB-MSGID
 AND MSGNR = MESSTAB-MSGNR.
 IF SY-SUBRC = 0.
 err_message = wa_errmess-TEXT.
 IF err_message CS '&1'.
 REPLACE '&1' WITH MESSTAB-MSGV1 INTO err_message.
 REPLACE '&2' WITH MESSTAB-MSGV2 INTO err_message.
 REPLACE '&3' WITH MESSTAB-MSGV3 INTO err_message.
 REPLACE '&4' WITH MESSTAB-MSGV4 INTO err_message.
 ELSE.
 REPLACE '&' WITH MESSTAB-MSGV1 INTO err_message.
 REPLACE '&' WITH MESSTAB-MSGV2 INTO err_message.
 REPLACE '&' WITH MESSTAB-MSGV3 INTO err_message.
 REPLACE '&' WITH MESSTAB-MSGV4 INTO err_message.
 ENDIF.
 CONDENSE err_message.
 WRITE: / MESSTAB-MSGTYP, err_message .
 ELSE.
 WRITE: / MESSTAB.
 ENDIF.
 endif.
ENDLOOP.
endform. "errorlog
FORM BDC_DYNPRO USING PROGRAM DYNPRO.
WA_BDCDATA-PROGRAM = PROGRAM.
WA_BDCDATA-DYNPRO = DYNPRO.
WA_BDCDATA-DYNBEGIN = 'X'.
APPEND WA_BDCDATA TO IT_BDCDATA.
CLEAR WA_BDCDATA.
ENDFORM.
FORM BDC_FIELD USING FNAM FVAL.
WA_BDCDATA-FNAM = FNAM.
WA_BDCDATA-FVAL = FVAL.
APPEND WA_BDCDATA TO IT_BDCDATA.
CLEAR WA_BDCDATA.
ENDFORM.
input file :
OR 2148 0001235 R-1162 8 17
OR 2148 0001235 R-1161 2 30
OR 2148 0001235 100-400 6 25
OR 2148 0001235 R-1162 4 12
OR 2148 0001236 R-1162 3 12
OR 2148 0001236 R-1161 2 30
OR 2148 0001236 100-400 1 25
OR 2148 0001236 R-1162 7 12
OR 2148 0001236 R-1161 8 30
OR 2148 0001236 100-400 10 25
OR 2148 0001235 R-1161 5 30
OR 2148 0001235 100-400 2 25
OR 2148 0001235 R-11621 3 12
OR 2148 0001235 R-1161 2 30
OR 2148 0001235 100-400 1 25
OR 2148 0001235 R-1162 7 12
OR 2148 0001235 R-1161 8 30
OR 2148 0001235 100-400 10 25
OR 2148 0001236 R-1162 8 17
OR 2148 0001236 R-1161 2 30
OR 2148 0001236 100-400 6 25
OR 2148 0001236 R-1162 4 12
OR 2148 0001236 R-1161 5 30
OR 2148 0001236 100-400 2 25

How can i delete Record when i click on Delete Link in a report

hi,
i have to create report
select S_NO,BILL_NO,LED_NAME,PUR_LED,VAT,BILL_DATE,ST_GRP_UND,GODOWN_NAME,
ITEM_NAME,UNIT,QTY,RATE,PER,DIS,AMOUNT,'Delete' from DUMY_AC_LED_PURASEI want to delete corressponding record when i click on Delete Link.
Here S_NO is P.k.
How can i delete Record when i click on Delete Link.

Manoj,
If something does not work then you should report back on the same thread so that there is continuity to the whole episode. Be as lucid as you can be so that people know whats the scenario. E.g. is not working is not enough. What happens? Does is show error , go blank, goes to another page... all that is important.
Its for posterity, down the line others will also visit the thread (may be).
Regards,

How can I know the size of DB Table

Hi, Guys,
1. How can I know the size of the DB Table in terms of kb
2. If I delete some records from the Table, does the actual size of the Table remains same or will it be reduced.
3. If size remains same after deletion, how to reduce the size ( i.e. occupied space).
thanks
Mahesh

Hi
1. How can I know the size of the DB Table in terms of kb
There is no precise method/tcode/program to know the Table size of a tables.
Just based on the record size of a table(say for example 2kb), and if 200 records are there then, we roughly assume that it occupied 400 kb.
All the tables are stored in Table spaces.
2. If I delete some records from the Table, does the actual size of the Table remains same or will it be reduced.
Time being it remains same. it won't get reduced immediately
during some next DB reorganisation it gets reorganised by reducing it.
3. If size remains same after deletion, how to reduce the size ( i.e. occupied space).
during next DB reorganisation it gets reorganised by reducing it.
Reward points if useful
Regards
Anji

How can i fetch records from 3 tables in a single query without using join

Hi.
Can any body please tell me How can i fetch records from 3 tables with a single query without using joins
Thanx
prabhudutta

Hi Prabgudutta,
We can fetch the data by using the views concept.
Go throuth this info we can know the how to create view and same like database table only we can fetch the data.
Views conatin the data at runtime only.
Four different view types are supported. These differ in the
way in which the view is implemented and in the methods
permitted for accessing the view data.
Database views are implemented with an equivalent view on
the database.
Projection views are used to hide fields of a table (only
projection).
Help views can be used as selection method in search helps.
Maintenance views permit you to maintain the data
distributed
on several tables for one application object at one time.
step by step creation of Maintenance view:
With the help of the table maintenance generator, you are able to maintain the ENTRIES of the table in SM30 transaction.
It can be set in transaction SE11 - Tools - Table maintenance generator.
Table maintanance Generator is used to manually input values using transaction sm30
follow below steps
1) go to se11 check table maintanance check box under attributes tab
2) utilities-table maintanance Generator-> create function group and assign it under
function group input box. Also assign authorization group default &NC& .
3) select standard recording routine radio in table table mainitainence generator to move table
contents to quality and production by assigning it to request.
4) select maintaience type as single step.
5) maintainence screen as system generated numbers this dialog box appears when you click on create button
6) save and activate table
One step, two step in Table Maintenance Generator
Single step: Only overview screen is created i.e. the Table Maintenance Program will have only one screen where you can add, delete or edit records.
Two step: Two screens namely the overview screen and Single screen are created. The user can see the key fields in the first screen and can further go on to edit further details.
SM30 is used for table maintenance(addition or deletion of records),
For all the tables in SE11 for which Table maintenance is selected , they can be maintained in SM30
Sm30 is used to maintain the table ,i.e to delete ,insert or modify the field values and all..
It creates the maintenance screen for u for the aprticular table as the maintenance is not allowed for the table..
In the SE11 delivery and maintenance tab, keep the maintenance allowed..
Then come to the SM30 and then enter the table name and press maintain..,
Give the authorization group if necessary and give the function group and then select maintenance type as one step and give the screen numbers as system specified..
Then create,,,
Then u will able to see the maintenance view for the table in which u can able to insert and delete the table values...
We use SM30 transaction for entering values into any DB table.
First we create a table in SE11 and create the table maintenance generator for that Table using (utilities-> table maintenance generator) and create it.
Then it will create a View.
After that from SM30, enter the table name and Maintain, create new entries, change the existing entries for that table.
Hope this resolves your query.
Reward all the helpful answers.
Rgds,
P.Naganjana Reddy

How can we know the size of the dimension(in Line item Dim)?

Hi to all experts,
We use Line item dimension if the size of dimension is 20% or more of the fact table. My doubt is that how can v know that the size of the dimesion is 20% or more of FT?. But we never store MD in dimension tables......So please help me to understand this scenario? Thanks in advance.

Hi
Normally before modelling you will assume the number of entries in your master data and transactional data..
If your dimension is having 3 characteristics
say A,B .....and these characteristic values are say
A---10,000( Total number of master data records)
B----7,000( Total number of master data records)
then your dimenstion would be 10,000 * 7,000 =700000000
in this case you better keep A in a dimension and B in another dimension.
Normally SAP recommends your dimension table shouldnot exceed 100,000...
so whenever you expect a characteristic is having more values then you should make it as line item...
If you want to add a new characteristic to the existing model then you can decide by comparing the ratio of dimension table to the fact table..
Please have a look at the below url for sizes
dimension size
Hope it helps
Thanks,
Teja
Edited by: Teja badugu on Apr 24, 2008 12:19 PM

How can I know when I reached space limitations

Hi, I want to know what happens when an enviorment reachs its space limitation.
I know that space available is 30mb per user and the only way to know how much space you've consumed is by calculations about the number of registers.
But I'd like to know how can I know when I reached that limit and what is the procediment to buy more space (overall how much time it takes).
Every comment will be appreciated.
Thank you.
Edited by: linkln on 13/08/2010 10:29 AM

We recently instituted a new CRM On Demand storage policy and we realize it hasn’t been disseminated as broadly as it should be. This new policy is significantly more generous than the former policy at no additional charge. We used to offer 30MB pooled storage for Multi-tenant, 45MB for Single-Tenant Standard Edition, and 60MB for Single-Tenant Enterprise Edition (this space covered standard records and attachments).
Customers often think in terms of records and not MB, especially when they are considering importing x million contacts or other records. An average record uses 2KB. We have made the following changes:
1)     Multi-tenant. Converted the 30MB to 15,000 records. Added 100MB per user for attachments;
2)     Single-Tenant Standard edition. Converted the 45MB to 22,500 records. Added 150MB per user for attachments;
3)     Single-Tenant Enterprise edition. More than doubled the 60MB to 70,000 records. Added 200MB per user for attachments;
In summary the new limits are:
Storage Allotment by CRM OD Offering______     Records per User_____Megabytes for Attachments to Records per User
Multi-Tenant___________________________15,000 ____________100
Single-Tenant Standard Edition_____________22,500 ____________150
Single-Tenant Enterprise Edition____________70,000 ____________200
A couple of additional notes:
•     When counting records we are only counting primary data records. Meta-data and configuration records don’t count against the limit.
•     Usage is pooled as before (i.e. a customer receives the amount of storage per subscriber as listed above multiplied by number of subscribers).
Edited by: bobb on Aug 13, 2010 10:57 AM
Edited by: bobb on Aug 13, 2010 11:03 AM

How Can I know about any change happened in the page??

........... I Use JDev 11g ........
How Can I know if any change happened in the page???
for example:
I have a page and I press a creation button that create a new row in view object I want when I press any button that will call another page the page ask a user Are you want to save changes? before leaving a page.
Or
I edit the value in a view object but not committed ( I didn't commit the data in database ) . When I want to leave the page I want to display a message say : Are you want to save changes?
How can I do that?
Thank You...
Sameh Nassar

Check out http://radio.weblogs.com/0118231/stories/2004/09/23/notYetDocumentedAdfSampleApplications.html Example 60. Do not go by the 'on page load' name... This approach will allow you to plug in your custom code at any 'phase' of your adf life cycle. You can capture any request coming from your page, and check for pending transaction states and act accordingly.. I realize that the reply is a little abstruse, but this is not a drag-drop-smile requirement.. :-)
http://download.oracle.com/docs/html/B25947_01/bcdcpal005.htm#sm0271
Julian

Hi experts . how can we know the stock details for a perticular plant?

hi experts . how can we know the stock details for a perticular plant

check this code
REPORT YSG_MATSTK_REP LINE-SIZE 220
 LINE-COUNT 50(5).
*& DATA DECLARATION *
TABLES: MARA, "GENERAL MASTER DATA
 MARC, "PLANT DATA FOR MATERIAL
 MARD, "STORAGE LOCATION DATA FOR MATERIAL
 MBEW, "MATERIAL VALUATION
 MVKE, "SALES DATA FOR MATERIAL
 MAKT. "MATERIAL DESCRIPTION
DATA: BEGIN OF I_MARA OCCURS 0,
 MATNR LIKE MARA-MATNR,"MATERIAL NUMBER
 MBRSH LIKE MARA-MBRSH,"INDUSTRY SECTOR
 MEINS LIKE MARA-MEINS,"BASE UNIT OF MEASURE
 END OF I_MARA.
DATA: BEGIN OF I_MARC OCCURS 0,
 MATNR LIKE MARC-MATNR,"MATERIAL NUMBER
 WERKS LIKE MARC-WERKS,"PLANT
 LVORM LIKE MARC-LVORM,"FLAG MATERIAL FOR DELETION AT PLANT
 "LEVEL
 PSTAT LIKE MARC-PSTAT,"MAINTENANCE STATUS
 DISPO LIKE MARC-DISPO,"MRP CONTROLLER
 END OF I_MARC.
DATA: BEGIN OF I_MAKT OCCURS 0,
 MATNR LIKE MAKT-MATNR,"MATERIAL NUMBER
 MAKTX LIKE MAKT-MAKTX,"MATERIAL DESCRIPTION
 END OF I_MAKT.
DATA: BEGIN OF I_MVKE OCCURS 0,
 MATNR LIKE MVKE-MATNR,"MATERIAL NUMBER
 VKORG LIKE MVKE-VKORG,"SALES ORGANIZATION
 VTWEG LIKE MVKE-VTWEG,"DISTRIBUTION CHANNEL
 END OF I_MVKE.
DATA: BEGIN OF I_MARD OCCURS 0,
 MATNR LIKE MARD-MATNR,"MATERIAL NUMBER
 LGORT LIKE MARD-LGORT,"STORAGE LOCATION
 LABST LIKE MARD-LABST,"VALUATED STOCK WITH UNRESTRICTED USE
 END OF I_MARD.
DATA: BEGIN OF I_OUT OCCURS 0,
 MATNR LIKE MARC-MATNR,
 WERKS LIKE MARC-WERKS,
 LVORM LIKE MARC-LVORM,
 PSTAT LIKE MARC-PSTAT,
 DISPO LIKE MARC-DISPO,
 MBRSH LIKE MARA-MBRSH,
 MEINS LIKE MARA-MEINS,
 MAKTX LIKE MAKT-MAKTX,
 VKORG LIKE MVKE-VKORG,
 VTWEG LIKE MVKE-VTWEG,
 LGORT LIKE MARD-LGORT,
 LABST LIKE MARD-LABST,
 END OF I_OUT.
DATA : TOT TYPE I. " TOT - TOTAL TO PRINT STOCK
*& S E L E C T I O N - S C R E E N *
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-100.
SELECT-OPTIONS: S_MATNR FOR MARA-MATNR OBLIGATORY.
PARAMETERS: P_WERKS LIKE MARC-WERKS OBLIGATORY.
SELECT-OPTIONS: S_LGORT FOR MARD-LGORT,
 S_DISPO FOR MARC-DISPO.
SELECTION-SCREEN END OF BLOCK B1.
*& I N I T I A L I Z A T I O N *
INITIALIZATION.
S_MATNR-SIGN = 'I'.
S_MATNR-OPTION = 'EQ'.
S_MATNR-LOW = 'M-14'.
S_MATNR-HIGH = 'M-18'.
P_WERKS = '3000'.
S_LGORT-SIGN = 'I'.
S_LGORT-OPTION = 'EQ'.
S_LGORT-LOW = '0001'.
S_LGORT-HIGH = '0004'.
S_DISPO-SIGN = 'I'.
S_DISPO-OPTION = 'EQ'.
S_DISPO-LOW = '001'.
S_DISPO-HIGH = '002'.
APPEND S_DISPO.
APPEND S_LGORT.
APPEND S_MATNR.
CLEAR S_DISPO.
CLEAR S_LGORT.
CLEAR S_MATNR.
*& S T A R T - O F - S E L E C T I O N *
START-OF-SELECTION.
SELECT MATNR WERKS LVORM DISPO FROM MARC
INTO CORRESPONDING FIELDS OF TABLE I_MARC
 WHERE WERKS EQ P_WERKS
 AND MATNR IN S_MATNR
 AND DISPO IN S_DISPO
 AND WERKS = P_WERKS.
IF I_MARC[] IS INITIAL.
 WRITE:/ 'NO MATCHING DATA AVAILABLE FROM MARC'.
 EXIT.
ENDIF.
SELECT MATNR LGORT LABST FROM MARD INTO TABLE I_MARD
 FOR ALL ENTRIES IN I_MARC
 WHERE MATNR = I_MARC-MATNR
 AND WERKS EQ P_WERKS
 AND LGORT IN S_LGORT.
IF I_MARD[] IS INITIAL.
 WRITE:/ 'NO MATCHING DATA AVAILABLE FROM MARD'.
 EXIT.
ENDIF.
SELECT MATNR VKORG VTWEG FROM MVKE INTO TABLE I_MVKE
 FOR ALL ENTRIES IN I_MARC
 WHERE MATNR = I_MARC-MATNR.
IF I_MVKE[] IS INITIAL.
 WRITE:/ 'NO MATCHING DATA AVAILABLE FROM MVKE'.
 EXIT.
ENDIF.
LOOP AT I_MARC.
 MOVE-CORRESPONDING I_MARC TO I_OUT.
 CLEAR MARC.
 SELECT SINGLE MATNR MBRSH MEINS FROM MARA
 INTO CORRESPONDING FIELDS OF MARA
 WHERE MATNR = I_OUT-MATNR.
 IF SY-SUBRC = 0.
 MOVE: MARA-MBRSH TO I_OUT-MBRSH,
 MARA-MEINS TO I_OUT-MEINS.
 ELSE.
 CONTINUE.
 ENDIF.
 SELECT SINGLE MATNR MAKTX FROM MAKT
 INTO CORRESPONDING FIELDS OF MAKT
 WHERE MATNR = I_OUT-MATNR.
 IF SY-SUBRC = 0.
 MOVE: MAKT-MAKTX TO I_OUT-MAKTX.
 ELSE.
 CONTINUE.
 ENDIF.
 LOOP AT I_MARD WHERE MATNR = I_MARC-MATNR.
 MOVE: I_MARD-LABST TO I_OUT-LABST,
 I_MARD-LGORT TO I_OUT-LGORT.
 APPEND I_OUT.
 ENDLOOP.
 LOOP AT I_MVKE WHERE MATNR = I_MARC-MATNR.
 MOVE: I_MVKE-VKORG TO I_OUT-VKORG,
 I_MVKE-VTWEG TO I_OUT-VTWEG.
 APPEND I_OUT.
 ENDLOOP.
 CLEAR I_OUT.
ENDLOOP.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
 FILENAME = 'C:\matstk.TXT'
 FILETYPE = 'ASC'
TABLES
 DATA_TAB = I_OUT.
*& T O P - O F - P A G E *
TOP-OF-PAGE.
WRITE:/ 'DATE:' ,SY-DATUM.
*& E N D - O F - P A G E *
END-OF-PAGE.
WRITE: / SY-ULINE,
 /100 'PAGNO: ',SY-PAGNO,
 SY-ULINE.
*& E N D -- O F -- S E L E C T I O N *
END-OF-SELECTION.
LOOP AT I_OUT.
 AT FIRST.
 WRITE :/ 'MATERIAL EXTRACTION REPORT',
 SY-ULINE.
 ENDAT.
 WRITE:/ SY-VLINE,
 I_OUT-MATNR,SY-VLINE,
 I_OUT-MEINS,SY-VLINE,
 I_OUT-WERKS,SY-VLINE,
 I_OUT-LVORM,SY-VLINE,
 I_OUT-PSTAT,SY-VLINE,
 I_OUT-DISPO,SY-VLINE,
 I_OUT-MBRSH,SY-VLINE,
 I_OUT-MAKTX,SY-VLINE,
 I_OUT-VKORG,SY-VLINE,
 I_OUT-VTWEG,SY-VLINE,
 I_OUT-LGORT,SY-VLINE,
 I_OUT-LABST,SY-VLINE.
 TOT = TOT + I_OUT-LABST.
 AT NEW MATNR.
 WRITE : 'NEW RECORD',
 SY-VLINE.
 ENDAT.
 AT END OF LABST.
 WRITE : 'STOCK = ',
 TOT,
 SY-VLINE,
 SY-ULINE.
 ENDAT.
 AT LAST.
 FORMAT COLOR 7 INTENSIFIED OFF.
 WRITE : /159 'TOTAL STOCK = ',
 TOT.
 ENDAT.
ENDLOOP.
 WRITE : /159 'TOTAL STOCK = ',
 TOT.
regards,
srinivas
*reward for useful answers*

How can I know if a manually created Journal Entries has not been paid yet?

Hi There.
I'm passing through the following situation: I need to find out which Journal Entries that have been manually created ( TransType = 30 ) don't have an Outgoing Payment record associated
Lets suppose that I manually created a Journal Entry. Let's call it OJDT_MAN
Then, I went to the Outgoing Payments Form ( Modules -> Banking -> Outgoing Payments -> Outgoing Payments ) and paid OJDT_MAN.
This process will create another Journal Entry. Let's call it OJDT_AUTO.
I can't find in the database anything that indicates that OJDT_MAN has already been paid. I tried looking for a Status field; Checking if OJDT_AUTO had some code that could get me to OJDT_MAN ( I found BaseRef and TransType = 46, that can guide me to the new OVPM record ); Tried looking at the new OVPM record for some field that could lead me to OJDT_MAN, but I had no success at all...
So, in resume, and again, how can I know if a manually created Journal Entry hasn't been paid?
(When I go to the Outgoing Payments Form and select a Business Partner, it B1 shows me only the not paid ones... How does he knows it? )

Just to make it more clear, the SQL we were looking for is this:
Select
From
OJDT
Where
OJDT.TransId Not In ( Select VPM2.DocEntry From VPM2 Where VPM2.InvType = 30 )
And
OJDT.TransType = 30

How can we know AR invoice is opended or closed?

Hi All,
I have a invoices(Receivables) data in 11.5.5. Now i would like to migrate open invoice or partially paid invoice to R12. How can we know that invoices(Receivables) is opened or closed.
Suggestions will be highly appreciated.
Thanks.
Edited by: user627525 on Feb 24, 2009 11:13 PM

Can't an invoice have more than 1 payment schedule id?
Yes, an invoice can have more than 1 Payment schedule ID
If so, would they all have to be zero or closed?
We have to check by Payment schedule ID
Regards,
Sridhar

How can I know which model of K9A2VM I have?

I have a K9A2VM motherboard with an Athlon 64 x2 3600+ AM2 CPU. I would now like to upgrade to an AM3 Phenom II CPU with lots and lots of cores.
However, I have a problem. I don't know if I have K9A2VM-FD or K9A2VM-FIH and I don't know how to find out. I've opened my box and looked at the card, but it only says K9A2VM. By reading the specs and looking at pictures, I know it has to be one of them, or at least that it is not K9A2VM-F V2 since it only has two RAM slots and I have four of them installed. There are other obvious differences too, which I can easily spot by looking at the picture.
Now, looking at the CPU support page for -FD and -FIH, they seem to have differences in what CPUs they support:
-FD at least supports an X6: http://www.msi.com/product/mb/K9A2VM-FD.html#/?div=CPUSupport
Phenom II X6 Thuban HDT90ZFBK6DGR 1090T 200 3.20 3M 6M E0 125 7501v1B.zip
But the -FIH CPU support page is different: http://www.msi.com/product/mb/K9A2VM-FIH.html#/?div=CPUSupport
If I can use that processor, I'm really happy. But -FIH doesn't seem to support Phenom II at all. So provided that the information in the CPU support page is correct, it's fairly important to me to know which model I have. But in case nobody knows how I can distinguish between them; if I buy a Phenom II X6 CPU and it turns out that my motherboard doesn't support it; what is the worst thing that can happen? Will I break the CPU or motherboard, or will it simply not work, but the hardware will still be fine?
Thanks.

So this is a MS-7501 Version 1.0 card, in addition to being a K9A2VM. The entire web refers to it as "K9A2VM-FD / FHI". One will work, and the other will go up in smoke. And there is no easy way to know which is which. So how can I know? The reason I bought this card was so I could upgrade the CPU at a later time. Now it seems that's not possible, because the available information is so very poor. I've never had to gamble when purchasing hardware from other vendors. Is this common for MSI?

Hi anybody there who can help me ha..? My phone 5s was stolen 1 month ago..Find my phone is no a big deal, How can i know whether my phone is in use??

Hi anybody there who can help me ha..? My phone 5s was stolen 1 month ago..Find my phone is no a big deal bcz it seems to be wiped out all data including settings. it might be in use somewhere turning new fresh Gadget. How can i know whether my phone is in use??

You would know for a fact if the device is in use, but if you go back to the find my iPhone app in iCloud.com, you can either select to erase it, or place it in lost mode, in which case, once the device makes a connection to the internet, it will automatically go into that mode.

How can i know the RPM of my HD?

I guys...
Simple question...
How can i know the RPM of my HD?
I have a Mac mini and i would like to know that.
Any ideas?.
Thanks so much!!!

Hi!!
It doesn't show...
Vendor:          NVidia
Product:          MCP79 AHCI
Link Speed:          3 Gigabit
Negotiated Link Speed:          1.5 Gigabit
Description:          AHCI Version 1.20 Supported
FUJITSU MHZ2120BH G1:
Capacity:          120.03 GB (120,034,123,776 bytes)
Model:          FUJITSU MHZ2120BH G1
Revision:          00810009
Serial Number:                  K64PT9427599
Native Command Queuing:          Yes
Queue Depth:          32
Removable Media:          No
Detachable Drive:          No
BSD Name:          disk0
Medium Type:          Rotational
Bay Name:          Lower
Partition Map Type:          GPT (GUID Partition Table)
S.M.A.R.T. status:          Verified
Volumes:
Capacity:          209.7 MB (209,715,200 bytes)
Writable:          Yes
BSD Name:          disk0s1
Macintosh HD:
Capacity:          119.69 GB (119,690,149,888 bytes)
Available:          21.38 GB (21,376,569,344 bytes)
Writable:          Yes
File System:          Journaled HFS+
BSD Name:          disk0s2
Mount Point:          /
FUJITSU MHZ2120BH G1:
Capacity:          120.03 GB (120,034,123,776 bytes)
Model:          FUJITSU MHZ2120BH G1
Revision:          00810009
Serial Number:                  K64PT9427599
Native Command Queuing:          Yes
Queue Depth:          32
Removable Media:          No
Detachable Drive:          No
BSD Name:          disk0
Medium Type:          Rotational
Bay Name:          Lower
Partition Map Type:          GPT (GUID Partition Table)
S.M.A.R.T. status:          Verified
Volumes:
Capacity:          209.7 MB (209,715,200 bytes)
Writable:          Yes
BSD Name:          disk0s1
Macintosh HD:
Capacity:          119.69 GB (119,690,149,888 bytes)
Available:          21.38 GB (21,376,569,344 bytes)
Writable:          Yes
File System:          Journaled HFS+
BSD Name:          disk0s2
Mount Point:          /
Those are the 2 texts...
Any idea?
Thanks!!

How can I know records is committed or un-committed

Similar Messages

Maybe you are looking for