How can I know the service that start with oracle 8i in SUN

as subject!
Thank You
Ricky

Try looking in the bdump directory, the alert file. The actual path should be in your init.ora or config.ora parameter file.
John Taylor

Similar Messages

How can i know the data that labview takes when calls visa read?????????????

First sorry for my english!
I have a program in wich i read data trough USB(in bulk mode) from a FIFO(from a microprocesor) . I don´t know if when i do a visa read and the program that is running in my microprocessor is waiting for the FIFO full, what data catch the visa read?, because labview don´t wait, always take data when visa read is call!!
THANKS THANKS......

A read operation just retrieves the bytes that are available on the serial port. Means that these bytes are there because they have already been sent by the connected device. They may be remains from a previous communication.
Your protocol should ensure that
1/ the serial buffer is empty before your start your communication session.
2/ you read either a specified number of bytes, or all the incoming bytes, using a timeout in case of failure
3/ you leave things clean after communication (empty buffer, close port...).
Try to be e more specific if you need further help.
Chilly Charly (aka CC)
E-List Master - Kudos glutton - Press the yellow button on the left...

How can I use the remote that comes with MacBook?

I have a MacBook remote (old macbook, not the pro). I no longer have the macbook computer, but I hope I can still use the remote. I do not know how. Please help me.

Only if it has IR support. Otherwise, it cannot. You would need to connect an IR receiver to the USB port.

How can I change the name that goes with my email

When I set up my Apple account, I used my first name (John) and middle initial, so my email shows that is from John. However, everyone calls me by my middle name (Dave), so I would like to change my email to appear to come from 'Dave' rather than 'John'. Even though I sign emails, Dave, people who don't know me reply to 'John.'
I changed my account information (Apple ID Summary) to J. David, but the email was not effected. Within Mail preferences my full name is shown as John D. and is greyed out so that I can't change it.
Not the end of the world, but it's one of those things ...

Very clever, that worked! Thanks for your persistance.
I don't want to take advantage of your kindness, but I have another annoying problem involving a Thunderbolt Firware Update for my MacBook Pro,
https://discussions.apple.com/message/22358562?ac_cid=op123456#22358562
It's another one that's not a big deal, but annoying.
Thanks again.

I want to buy iPad Air online, how do I know the one that can work with Nigeria gsm network.

I want to buy iPad Air online, how do I know the one that can work with Nigeria gsm network.

Take a look at HeadRoom (headphone.com). It's a fabulous resource for all types of headphones, with great guides and useful reviews.
http://www.headphone.com/

Could any one tell me that How can i create the service User ie j2ee SID

hi all,
In the implementation of SPNego Authentication schem in my portal system.
i want to create the service user ie .j2ee-<SID>.
<b>could any one tell me that How can i create the service User ie j2ee-<SID> in my visual administrator??</b>.
any help will be highly Appretiated .
thanks and regards.
vinit soni.

Vineet,
the user management tab opens in Read Only mode - thats why the button is coming as disabled. There is a button for switching into Edit mode - it looks like a pen / pencil on the top bar. Click on that - your "Create User" button would be enabled.
Also regarding creation of Service User via code level you can see <a href="https://www.sdn.sap.com/irj/sdn/thread?messageID=1057074">THIS</a> thread. And <a href="http://HERE">http://help.sap.com/saphelp_nw04/helpdata/en/f9/e3162ec55f4df6922d161f3785012a/frameset.htm</a>HERE[/url] is the SAP Help documentation on required permission settings.
Regards,
Shubhadip
Message was edited by:
Shubhadip Ghosh
Message was edited by:
Shubhadip Ghosh

How can I know the name of the file that the user has currently open ?

Hello
I'm developing a module for x3dv.
http://hiperia3d.blogspot.com/search/label/X3DV%20Module%20For%20Netbeans
I am going to add a button to open the files when I click it.
I just need to know how can I know the name of the file that the user has currently open in the editor. What variable holds it in Netbeans?
Thank you
Jordi

If you are using the JFileChooser to open the document, I would create another class with this included:
//initiate class variables
private File f;
//create JFileChooser
JFileChooser fc = new JFileChooser();
fc.setMultiSelectionEnabled(false);
fc.setFileSelectionMode(JFileChooser.FILES_ONLY)
//set the chooser to initialise File f with the file selected
int status = fc.showOpenDialog(null);
if (status == JFileChooser.APPROVE_OPTION)
f = fc.getSelectedFile();
public File getFile()
return f;
}

Is there a limit for the apps that i purchased or i can purchase as much i want? and how can i know the capacity it's taking? Thank you

Is there a limit for the apps that i purchased or i can purchase as much i want? and how can i know the capacity it's taking? Thank you

Yes you can buy whatever you want if your credit card is in good standing.
Before you buy, read the size of the download in iTunes/App/iBook Store.
Rule of thumb, you need to reserve about 10% of your total space.

How can i know the port of my database?

hello,
how can i know the port of my database is working in?
ty

user11933068 wrote:
I don't know how to do this, sorry
:-(TNSNAMES.ORA is used by the client to resolve an alias to an actual server/listenr port/db service name.
TNSNAMES.ORA is found, by defualt, on the client machine at $ORACLE_HOME/network/admin
Here's how it works:
Suppose I have this in my tnsnames.ora:
fubar =
(DESCRIPTION =
    (ADDRESS_LIST =
      (ADDRESS = (PROTOCOL = TCP)(HOST = myhost)(PORT = 1521))
    (CONNECT_DATA =
      (SERVICE_NAME = btzlkfp)
)So, my connect string would look something like this:
$> sqlplus scott/tiger@fubarTNS will take the name 'fubar' and look it up in the tnsnames file. In my example, it will then route the connection request to 'myhost' (using other net services to resolve that to an actual IP address), and place the request on port 1521 at that server. The listener will pick that up and see that scott wants to log on to database 'btzlkpf'.
There's more, but at this stage I want you to understand the connection between what you enter for your connect string and the database itself.

How can i know the price for iphone s5 in Middle East in Oman

hi..
please help me
i want to buy an iphone 5s. how can i buy it from apple store?
how can i know the real price for my country, aware that i am in Middle East exactly in Oman?
and how many time it will take to reach in my country Oman?
please help as soon as you can..
thank you

As I said, if you want to buy it from the USA online Apple store, you will need to have a credit card issued by an American Bank or financial company, you will have to have a USA billing address associated with that card, and you will have to have it shipped to a USA street address.
Aramax is a shipping company - you do not have a credit card from them and they cannot pay for your purchase. Having an account with a shipping company doesn't provide you with a USA source of payment for your purchase.
As I understand it, the Oman government does not allow the iPhone to be sold in Oman, there are no official service providers for it, and thus there is no legitimate source to buy an iPhone from within Oman.
Online Apple stores do not allow payment by foreign means or in foreign currency, they do not do currency exchange, nor do they ship internationally.

If i Know the Interface name of the badi ,how can i know the badi definitio

Hi Experts,
1. If i Know the Interface name of the badi ,how can i know the badi definition name?
2. And also if i know the name of the implimentation class,how can i know the implimantation name and definitin name
Thanks&Regards
Ramakrishna L

Hi,
in order to find BAdI definition starting from the interface, you should perform a "Where used List" from SE24.
Type your interface name and then, in the where used dialog box, tick the 'Business Add-in" check box.
1.But is there any table which stores Implimentation name and Implimentation class name?
2.And also any table that stores BADI Definitiion name and Implimentation names.
1. SXC_CLASS table; Exit, implementation side: Class assignment (multiple)
2. SXC_EXIT table: Exit: Implementation side: Assignment: Exit - Implementation
Regards,
Andrea

How can i know the RPM of my HD?

I guys...
Simple question...
How can i know the RPM of my HD?
I have a Mac mini and i would like to know that.
Any ideas?.
Thanks so much!!!

Hi!!
It doesn't show...
Vendor:          NVidia
Product:          MCP79 AHCI
Link Speed:          3 Gigabit
Negotiated Link Speed:          1.5 Gigabit
Description:          AHCI Version 1.20 Supported
FUJITSU MHZ2120BH G1:
Capacity:          120.03 GB (120,034,123,776 bytes)
Model:          FUJITSU MHZ2120BH G1
Revision:          00810009
Serial Number:                  K64PT9427599
Native Command Queuing:          Yes
Queue Depth:          32
Removable Media:          No
Detachable Drive:          No
BSD Name:          disk0
Medium Type:          Rotational
Bay Name:          Lower
Partition Map Type:          GPT (GUID Partition Table)
S.M.A.R.T. status:          Verified
Volumes:
Capacity:          209.7 MB (209,715,200 bytes)
Writable:          Yes
BSD Name:          disk0s1
Macintosh HD:
Capacity:          119.69 GB (119,690,149,888 bytes)
Available:          21.38 GB (21,376,569,344 bytes)
Writable:          Yes
File System:          Journaled HFS+
BSD Name:          disk0s2
Mount Point:          /
FUJITSU MHZ2120BH G1:
Capacity:          120.03 GB (120,034,123,776 bytes)
Model:          FUJITSU MHZ2120BH G1
Revision:          00810009
Serial Number:                  K64PT9427599
Native Command Queuing:          Yes
Queue Depth:          32
Removable Media:          No
Detachable Drive:          No
BSD Name:          disk0
Medium Type:          Rotational
Bay Name:          Lower
Partition Map Type:          GPT (GUID Partition Table)
S.M.A.R.T. status:          Verified
Volumes:
Capacity:          209.7 MB (209,715,200 bytes)
Writable:          Yes
BSD Name:          disk0s1
Macintosh HD:
Capacity:          119.69 GB (119,690,149,888 bytes)
Available:          21.38 GB (21,376,569,344 bytes)
Writable:          Yes
File System:          Journaled HFS+
BSD Name:          disk0s2
Mount Point:          /
Those are the 2 texts...
Any idea?
Thanks!!

HT4796 How can I take the files that were migrated from my PC to my Mac and add all those files to my current user instead of having 2 users?

How can I take the files that were migrated from my PC to my Mac and add all those files to my current user instead of having 2 users? Having to log out just to sign in on a different user to access the files is absurd.
Do I make all the files sharable to all the NOW users on the mac then just delete the files? Or can i erase my account that I made when starting up my new mac and then just use the one with the transferred files?
I just dont want to have to og in and out of 2 different accounts .. Help please.
-Nina

Sorry. /Users is a folder path. It would be similar to C:\Users (if that exists on Windows).
So, in the Finder, select Computer from the Go menu.
You'll see Macintosh HD, double-click that to open it.
In there you'll see several folders. One is Users. That is where all the user Home folders exist. Select the other account's home folder and go to step 3.
If you have any more confusion, please stop and ask. We'll get there.
If you feel more comfortable, you can just log into that other account and move the files into /Users/Shared.
Then, log into the account you wish to use and copy the files from the Shared folder and paste them into your Home folder, wherever they belong, Documents, Music, Pictures, etc. That just takes a little more work. Transferring them into Shared, and then copying into your home sets the permissions on the files so that you won't have a problem accessing them later. The steps I provided just prevent you from having to do the double move, since you are not going to use the old account once you are done.
Quick unix shorthand. If someone gives you a file path that begins with a /, that means the root of the hard drive, ie Macintosh HD (if you haven't renamed it). The path separator in unix is /, not \.
A path that starts with ~/ means your Home folder, the one inside /Users named with your account name.

How can i Know the email linked to icloud

Please can anyone help me how to know teh email linked to my phone ??
it shows me h********@hotmail.com i tried to logged in with my account that belong to h********@hotmail.com and it says inocrrect password or email i tried to reset my id but no reset mail was sent to my email ..
so i tried to creat a new with the existing email addreess and it works and verified and finally i tried to activate it with h********@hotmail.com with the new passs and it says account cannot be activate with h********@hotmail.com it is linked to another account ..
so please how can i know the linked email to my phone
Thank you

Welcome to the Apple community jorjh.
If you mean that Find My Phone is asking for a password to a different Apple ID to your current Apple ID.
This feature has been introduced to make stolen phones useless to those that have stolen them.
However it can also arise when the user has changed their Apple ID details with Apple and not made the same changes to their iCloud account/Find My Phone on their device before upgrading to iOS 7, or if you restore from a previous back up made before you changed your details.
The only solution is to change your Apple ID back to its previous state with Apple at My Apple ID using your current password, you don’t need access to this address if it’s previously been used with your Apple ID, once you have saved these details enter the password as requested on your device and then turn off "find my phone" and delete the account from your device.
You should then change your Apple ID back to its current state, save it once again and then log back in using your current Apple ID. Finally, turn "find my phone" back on once again.
This article provides more information about Activation Lock.

How can we know the affected reports when i remove object from universe

Hi All,
If i remove any objects from the universe.
How can i know the list of affected reports.

Thanks for your update.
It shows what are all the reports has been created by using that particular universe.
But my question was, if i remove any object from the universe, Then what are all the reports affected(We may not use that deleted object in all the reports)

How can I know the service that start with oracle 8i in SUN

Similar Messages

Maybe you are looking for