How can I list all available variables inside a movieClip

I have a lot of movieclips in my file and each movieclip has
its own set of variables.
There is any way to trace all available variables inside any
movieclip? I mean, how can i know what variables and their values
are inside a movie clip!
Tks,

if your movieclip has instance name mm, you can use:

Similar Messages

How can I list all the domains configured for Weblogic Servers?

How can I list all the domains configured for Weblogic Servers?
I saw a note, which says the following:
"WebLogic Server does not support multi-domain interaction using either the Administration Console, the weblogic.Admin utility, or WebLogic Ant tasks. This restriction does not, however, explicitly preclude a user written Java application from accessing multiple domains simultaneously."
In my case, I just want to list all the domains, is that possible by using any scripts?
Thanks
AJ

If you use WLS Node Manager and the Config Wizard was used to create the domains, then the list of domains should be in a location like this:
<MIDDLEWARE_HOME>\wlserver_10.3\common\nodemanager\nodemanager.domains
Enterprise Manager Grid Control also has support for multi-domain management of WLS in a console.

How can I list all users and their DEFAULT tablespace?

How can I list all users and their DEFAULT tablespace?
Peter

Peter, the following short article that lists the most heavily used Oracle rdbms dictionay views might be of interest based on your question:
How do I find information about a database object: table, index, constraint, view, etc… in Oracle ? http://www.jlcomp.demon.co.uk/faq/object_info.html
HTH -- Mark D Powell --

Where can found lists all system variables of oracle?

Hi all,
Where can be found all systems variables of oracle (all version include)
Thanks in advance
g.

http://tahiti.oracle.com for the docs.
Demos showing how to use them in Morgan's Library at www.psoug.org

How can I list all users who have access to a particular TABLE or VIEW

Hi,
Can someone tell me how I can list all users who have access to a particular TABLE or VIEW.
Abhishek

Hi,
Take a look on this link: http://www.petefinnigan.com/tools.htm
Cheers

How can i find all global variable and parameters in a form?

I don't know name of global variables and parameters,but i want get their name and value .
how can i do? who can help me?
Thank you.
Daniel Liang
2007.1.19

no problem. As Francois said you can't do it programmatic in runtime.
But when you use the debug-mode you can see each global with name and value.
By the way: It's not good to not know all the globals in your application. This is one of the most important things you have to write down for your app. Create a wiki for such informations, so that all developer can share their information.

How can I list all files in a subdirectory in a jar

Hello.
I have wrote a program which lists all class files in given directory.
I used Class.getResource(""), and File.list().
Now I turned the program into single jar file.
It never works.
I know the reason but do not know how to fix the problem.
What can I do?
Thank you in advance.

If you are trying to list the files of jar file from java code you can use this code.
Try with the below code
=============================================
try {
// Open the JAR file
JarFile jarfile = new JarFile("filename.jar");
// Get the manifest
Manifest manifest = jarfile.getManifest();
// Get the manifest entries
Map map = manifest.getEntries();
// Enumerate each entry
for (Iterator it=map.keySet().iterator(); it.hasNext(); ) {
// Get entry name
String entryName = (String)it.next();
// Get all attributes for the entry
Attributes attrs = (Attributes)map.get(entryName);
// Enumerate each attribute
for (Iterator it2=attrs.keySet().iterator(); it2.hasNext(); ) {
// Get attribute name
Attributes.Name attrName = (Attributes.Name)it2.next();
// Get attribute value
String attrValue = attrs.getValue(attrName);
} catch (IOException e) {
=================================================
use import java.util.*;
and import java.io.*;

How can I list all the column names of a table by programming?

Hi,
Now I want to write an function which has the following features:
Firstly, The function was given a parameter as table name.
Then, it will lists all the columns names of the table.
e.g
table: person
---firstName------lastName----+
       Michale               Jackson
We can get the columns 'firstname' and 'lastName' by calling the function with table name 'person'.
And I also wonder that where I can get reference book or any other materials?
Thanks.
Edited by: wenjing wang on Feb 15, 2008 6:42 AM
Edited by: wenjing wang on Feb 15, 2008 6:57 AM

hi,
hope the below code helps u. Just take the headee which contains the field name and split it like below and compare it with the field name u want here 'last name'.
here,
'First name' will be in wt_filedata1 and remaining field names in wt_filedata2, so 'do' continues.
c_tab must be the separator, either , or + or tab etc..
CODE:
read table person into wl_header index 1.
do.
    split wl_header at c_tab into: wt_filedata1 wt_filedata2.
    if wt_filedata1 <> 'lastname'.
      cnt1 = cnt1 + 1.
      wl_header = wt_filedata2.
    else.
      exit.
    endif.
enddo.
Please reward if it is useful.
regards,
sri

How can I list all folders that contain files with a specific file extension? I want a list that shows the parent folders of all files with a .nef extension.

not the total path to the folder containing the files but rather just a parent folder one level up of the files.
So file.nef that's in folder 1 that's in folder 2 that's in folder 3... I just want to list folder 1, not 2 or 3 (unless they contain files themselves in their level)

find $HOME -iname '*.nef' 2>/dev/null | awk -F '/' 'seen[$(NF-1)]++ == 0 { print $(NF-1) }'
This will print just one occurrence of directory
The 'find' command files ALL *.nef files under your home directory (aka Folder)
The 2>/dev/null throws away any error messages from things like "permissions denied" on a protected file or directory
The 'awk' command extracts the parent directory and keeps track of whether it has displayed that directory before
-F '/' tells awk to split fields using the / character
NF is an awk variable that contains the number of fields in the current record
NF-1 specifies the parent directory field, as in the last field is the file name and minus one if the parent directory
$(NF-1) extracts the parent directory
seen[] is a context addressable array variable (I choose the name 'seen'). That means I can use text strings as lookup keys. The array is dynamic, so the first time I reference an element, if it doesn't exist, it is created with a nul value.
seen[$(NF-1)] accesses the array element associated with the parent directory.
seen[$(NF-1)]++ The ++ increments the element stored in the array associated with the parent directory key AFTER the value has been fetched for processing. That is to say the original value is preserved (short term) and the value in the array is incremented by 1 for the next time it is accessed.
the == 0 compares the fetched value (which occurred before it was incremented) against 0. The first time a unique parent directory is used to access the array, a new element will be created and its value will be returned as 0 for the seen[$(NF-1)] == 0 comparison.
On the first usage of a unique parent directory the comparison will be TRUE, so the { print $(NF-1) } action will be performed.
After the first use of a unique parent directory name, the seen[$(NF-1)] access will return a value greater than 0, so the comparison will be FALSE and thus the { print $(NF-1)] } action will NOT be performed.
Thus we get just one unique parent directory name no matter how many *.nef files are found. Of course you get only one unique name, even if there are several same named sub-directories but in different paths
You could put this into an Automator workflow using the "Run Shell Script" actions.

How can I permit all traffic from inside-dmz-outside on asa5505

Scenario :
Servers are in DMZ, Internal LAN Users should access ports Specified (5000 & 2048). Router 2801 is facing Leased line; from there it’s connected to firewall.
Router LAN IP: 83.111.X.X - 255.255.255.X
ASA Version 7.2(4)
hostname ciscoasa
domain-name default.domain.invalid
enable password 2KFQnbNIdI.2KYOU encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
names
interface Vlan1
nameif inside
security-level 100
ip address 192.168.X.X 255.255.255.0
interface Vlan2
nameif outside
security-level 0
ip address 83.111.X.X 255.255.255.240
interface Vlan3
nameif dmz
security-level 100
ip address 192.168.100.1 255.255.255.0
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
interface Ethernet0/2
switchport access vlan 3
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
interface Ethernet0/6
switchport access vlan 3
interface Ethernet0/7
ftp mode passive
dns server-group DefaultDNS
domain-name default.domain.invalid
same-security-traffic permit inter-interface
same-security-traffic permit intra-interface
pager lines 24
logging asdm informational
mtu inside 1500
mtu outside 1500
mtu dmz 1500
no failover
icmp unreachable rate-limit 1 burst-size 1
asdm image disk0:/asdm-524.bin
no asdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 1 0.0.0.0 0.0.0.0
route outside 0.0.0.0 0.0.0.0 83.111.x.x
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
http server enable
http 192.168.1.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
telnet timeout 5
ssh timeout 5
console timeout 0
dhcpd auto_config outside
dhcpd address 192.168.1.2-192.168.1.254 inside
dhcpd enable inside
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
service-policy global_policy global
prompt hostname context
Cryptochecksum:5663409d6ba3ad0bcd163e691f032f76
: end

Hi Ben,
Thank you for the response. I followed the link and tried reading everything you posted on AEs but I'm afraid that I didn't understand it all. It seems that each AE example had a single input and a single output (e.g. a double). Is this the case?
What I have is a couple of front panel clusters containing (approximately) 18 control doubles, 8 indicator doubles, 5 boolean radio button constructs and 26 boolean control discretes. I clusterized it to make it readable. In addition I'll eventually have a cluster of task references for hardware handles.
All I want to do is update the front panel values like I would do in a C, VB or any other language. I've tried referencing the cluster and using the reference from inside the loops. I've tied using local variables. Neither works. I'm experimenting with globals but it seems that I have to construct the front panel in the gloabal and then I wouldn't know how to repoduce that on the front panel of the main VI. Sometimes it seems that more time is spent getting around Labview constructs than benefitting from them.
I hope the 'Add Attachment' function actuals puts a copy of the VI here and not a link to it.
Thanks again for the suggestion,
Frank
Attachments:
Front Panel Reference.vi ‏33 KB

How can I list all recipients of an email I have sent?

Hi there,
I sent an email to 16 people today using Mac Mail v 7.1 (1827) - 1 group of 15 people and another person. I later found out that the single email may have been wrong and I wanted to check it... i.e. did I put gmail.com instead of hotmail.com?
When I clicked on the message in the sent folder, the email came up with the display showing the email address I used to send it (on the top left) and on the top right, the timestamp of when it was sent and just below that, a link with "Hide details".
Clicking on Hide Details DOESN'T actually hide the information !!! it expands with a list of email addresses which in this case was 4 email addresses and a link with 12 more people. Clicking on "12 more" people reverts back to my email address and timestamp.
So in effect, I can't display the email addresses I sent to and the logic of "Hide Details" seems to be working in reverse.
The only way I can check to see to whom I sent the email, is to reply to all recipients, view the TO/CC/BCC fields, and then cancel. But surely, clicking on the "12 more" or however more number of people, should display all the email addresses or am I missing something really obvious?
Thanks,
Maz

Hi Wayne,
Thanks for your reply.
I tried your suggestion and it still didn't work. I've just done a test email and I've attached the 2 images.
The first image lists a few of the email recipients and N people more and when I click on "N more", I get the second image.
So it's either one or the other I get and no full list of email recipients.
Thanks,
Maz

How can I use a public variable inside a CachedResultSet

The public variable that I declared cannot be called inside the CachedResultSet class....
Heres a part of the code:
     public String type;
     public String getType()
         return type;
     public void setType(String s)
         type = s;
     public CachedRowSet first_report(){
          try {
          String t=type;<<it cannot get the String type declared outside.....
          Statement stmt = con.createStatement();
          String query = "select stock_code, shares_prices, new_shares, trans_date, prev_close from allTrans where name_broker='"+type+"' order by stock_code";
          ResultSet rs = stmt.executeQuery(query);
            CachedRowSetImpl crset = new CachedRowSetImpl();
            crset.populate(rs);
          rs.close();
          stmt.close();
          con.close();
          return crset;
           catch (Exception e)
          {   System.out.println(e.getMessage());
              return null;
     }

I am not getting any error but the value of String type is null when entering the CachedRowSet...I don't know why it is null and yet the String type can be used by other classes...Like the getType...
Heres the code:
import java.sql.*;
import sun.jdbc.rowset.*;
import com.sun.rowset.*;
import javax.sql.rowset.CachedRowSet;
public class views
      String url, uname, pwd;
      Connection con;
     public String type;
      public String hstock;
      public String hbroker;
     public String getType()
     { System.out.println("get:"+type);
         return type;
          public void setType(String s)
         type = s;
     public views()
           try
           Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
           url = "jdbc:odbc:***";
           uname = "root";
           pwd = "yes";
           con = DriverManager.getConnection(url, uname, pwd);
           } catch (Exception e)
                System.out.println(e.getMessage());
public CachedRowSet first_report(){
          try {
          String t=type;
            System.out.println(t);
            System.out.println(type);
          Statement stmt = con.createStatement();
          String query = "select stock_code, shares_prices, new_shares, trans_date, prev_close from allTrans where name_broker='"+type+"' order by stock_code";
          ResultSet rs = stmt.executeQuery(query);
            CachedRowSetImpl crset = new CachedRowSetImpl();
            crset.populate(rs);
          rs.close();
          stmt.close();
          con.close();
          return crset;
           catch (Exception e)
          {   System.out.println(e.getMessage());
              return null;
     }

How can I view all available wireless networks?

So, I recently set up a new wireless network at home. Living in an apartment building means there are lots of other wireless networks floating around, none of which I have any interest in joining. Unfortunately, my phone will only list five or six available networks, with my new network not included. I can't "forget" any of the other networks, as I have never connected to them, and attempting to enter my network and password fails.
Thus, I need to either 1) view every single available network, or 2) find a way to get rid of the networks I'm not interested in

Please link to an example of a page you're having problems with. It should be accessible without a login.

In iTunes 11.2, how can I download all available episodes of a podcast?

I have switched to list view and there is no button next to the podcast titles and I have to download each episode manually from the store. Please help!

What, is it just a feature they removed?

How can a class access a variable on a MovieClip's time line?

in my class I declare a linked movie clip:
a_mc = new LinkedMC ();
trace(a_mc.testString);
and on the time line of LinkedMC:
var testString = "test string";
but I can't access testString.
any clues?
Thanks!

you're trying to access the variable before it's defined. have your LinkedMC dispatch an event letting your know the variable has been defined and assign a listener to a_mc to detect that event. in the listener function, use your trace() function.

How can I list all available variables inside a movieClip

Similar Messages

Maybe you are looking for