How can I make DAQ VIs visible when using NI-DAQ 4.9 with LabVIEW 6.0?

My operational system is Windows 98, I am using a AT-DSP2200 card and is configured. I have installed a NI-DAQ 4.9 (the last for this card) and I use Labview 6.0, but I can not find the DAQ VIs on the functions palette. How can I solve this?

Hello;
That version of the driver is too old to work with Labview 6i. The oldest version of NI-DAQ that one can combine with Labview 6i is version 6.1.
You will need either to use another version of Labview, or to investigate a replacement hardware that you can use with newer versions of NI-DAQ.
Regards
Filipe A.
Applications Engineer
National Instruments

Similar Messages

  • How can I make the data persistent when using plist ?

    I have a UITableView table1. And when I touch any cell in the table a new UIViewController appears and it have two UITextField's name and description. After entering the data in both the text fields I used the save button to save them. In save method I wrote the code for the data to be stored in plist.
    -(void)save:(id)sender
    indexOfDataArray = temp;
    NSString *string1 = [[NSString alloc]init];
    NSString *string2 = [[NSString alloc]init];
    string1 = nameField.text;
    string2 = descriptionField.text;
    NSDictionary *myDict = [[NSDictionary alloc] initWithObjectsAndKeys:string2, string1, nil];
    [myArray addObject:myDict];
    NSArray *paths = NSSearchPathForDirectoriesInDomains(NSDocumentDirectory, NSUserDomainMask, YES);
    NSString *documentsDirectory = [paths objectAtIndex:0];
    NSString *path = [documentsDirectory stringByAppendingPathComponent:@"VideoData.plist"];
    [myArray writeToFile:path atomically:YES];
    UIAlertView *alertMesage = [[UIAlertView alloc] initWithTitle: @"Save Alert" message:@"The data entered is saved" delegate:nil cancelButtonTitle:@"cancel" otherButtonTitles:nil] ;
    [alertMesage show];
    [alertMesage release];
    [myArray retain];
    But the problem is every time I restart my application the data in the plist is deleted. How can I retain the data in the plist name I specified ?

    I think yes, I am specifying only one file name to store in the path. I understood my where I am wrong.
    If I added data in plist for two items(item1 and item2). And again I need to add next two items(item3 and item4) . How can I make item3 and item 4 do not replace item1 and item2 ?
    Thank You.

  • When I am connected to my home wifi, it says I am connected but the 4G icon doesn't go away.  How can I make that go away when I am connected?

    When I am connected to my home wifi, it says I am connected but the 4G icon doesn't go away.  How can I make that go away when I am connected?

    When I'm at my home, and on my Wifi, my 4G icon on my LG G2 is still present. No big deal. If the bits can flow via WiFi, that's what they'll do.
    You might try (if you really MUST shut off the cellular radio):
    Settings, Network Connections and More networks. Select Mobile Networks and uncheck Mobile data and data roaming.
    Not sure if that will work - but give it a try.

  • How can I make it so that when Safari opens it takes me to the homepage?

    Say I am on youtube and I quit safari, when I reopen safari later, it goes to the page last open, in this case, youtube. How can I make it so that when Safari opens it always takes me to the homepage?

    Click on the red button (top left) to close the window before quitting.

  • I updated my iphone to ios 7.1.1 and after that my contact photo when i call or call others to me is a small cycle of that picture i choose ... How can i make a big picture when i call my contant and when others call me ?

    I updated my iphone to ios 7.1.1 and after that my contact photo when i call or call others to me is a small cycle of that picture i choose ... How can i make a big picture when i call my contant and when others call me ?

    It's not clear why Apple made this change; speculation (which is not really allowed in these forums) is that it was done to protect the privacy of the caller.

  • How can I make a backup listing of all of my Firefox bookmarks, with complete URLs, so I can print it out from a word processing document?

    == Issue
    ==
    I have a problem with my bookmarks, cookies, history or settings
    == Description
    ==
    How can I make a backup listing of all of my Firefox bookmarks, with completely written out URLs, so I can print it out from a word processing document? Please email me the answer-
    [email protected]
    <blockquote>duplicate. Locked. Please continue [https://support.mozilla.com/en-US/forum/1/727213 here] -MJB</blockquote>
    == Firefox version
    ==
    2.0.0.4
    == Operating system
    ==
    PPC Mac OS X Mach-O
    == User Agent
    ==
    Mozilla/5.0 (Macintosh; U; PPC Mac OS X Mach-O; en-US; rv:1.8.1.4) Gecko/20070515 Firefox/2.0.0.4
    == Plugins installed
    ==
    *-Netscape Navigator Default Plug-in
    *Runs Java applets using the latest installed versions of Java. For more information: Java Embedding Plugin. Run version test: Test Your JVM.
    *Plugin that plays RealMedia content
    *The QuickTime Plugin allows you to view a wide variety of multimedia content in web pages. For more information, visit the QuickTime Web site.
    *Shockwave Flash 9.0 r260
    *Provides support for Digital Rights Management
    *Provides support for Windows Media.
    *Java 1.3.1 Plug-in (CFM)
    *Macromedia Shockwave for Director Netscape plug-in, version 8.5.1
    *Java 1.3.1 Plug-in

    Hello.
    Although possibly not related to your problem, I have to remind you that the version of Firefox you are using at the moment has been discontinued and is no longer supported. On top of this, it has known unpatched bugs and security problems. I urge you to update to the latest version of Firefox, for maximum security, stability, performance and usability. You can get it for free, as always, at [http://www.getfirefox.com getfirefox.com].

  • How can i make calculation in two file using two parameter

    how can i make calculation in two file using two parameter
    Solved!
    Go to Solution.

    i am having two differnt file, both file having no and time , i want to make programme that when, number and tiome is same in both file give that index onle  in , i am going to attached the file
    Attachments:
    iisc11-jan2010extract.txt ‏1253 KB
    sp3.xlsx ‏12 KB

  • How can I show additional tab rows when using many open tabs?

    How can I show additional tab rows when using many open tabs?

    What method (code) did you use to get the Tab bar displaying in the space used for the Navigation Toolbar (location bar)?
    The Tab bar should be displayed above the Navigation Toolbar.
    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
    *Do NOT click the Reset button on the Safe Mode start window.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • My school wants to purchase three copies of one of my photo books. The school is tax exempt. How can we make a tax exempt purchase using a school credit card?

    My school wants to purchase three copies of one of my photo books. The school is tax exempt. How can we make a tax exempt purchase using a school credit card?

    I don't believe Apple is setup for tax exempt purchases.  It's strictly comsumer oriented.
    Are you making a profit on your book sale?  If so just up the price to cover the tax and you purchase it and deliver to the school. If not then reimburse the school for the tax and write it off as a deduction.
    OT

  • How can i make Distiller autoname file ( when exprting from other application?)

    hello everyone,
    i have been searching for a solution for a long time please help me >
    we have more than 100.000 docuents saved as pic on our network at work by using ( Laser Fiche). I wanted to save all files by using acrobat distiller but when i try to print a file i was prompted to enter a file name! but i don't want to... i want the distiller create a file name automatially.
    in the preferencesd i unchecked ( ask for PDF .. ) but the problem is that all files saved were overwritten because distiller was imporing the file name from Laser Fich!
    how can I make distiller ( autoname files like 0001 0002 0003 and so on) ?
    forgot to tell you that i am using acrobat version 5 ( and windows xp + laser fiche at work )
    thanks in advance

    thanks Bill@VT -
    it didn't work
    I opened the properiteis of the distiller and uncheck the ( prompt for the PDF file name) so that the distiller can save files automatically . it did but by overwriting the files because the original files in the LASER FICHE have same names so the distiller saved one file only by overwriting ....that's why i want to make distiller to name files when saving them ( the distiller are imorting the files from Laser fiche only but i want it to autoname them )
    i also opened distiller properites and unchecked the ( ask to replace existing PDF filename ) the distiller was always asking me to replace file ! and I can't do it this way because I have more than 100.000 docuents!
    sorry , I know this is a very difficult question
    but I would very happy if you can help me
    hank you
    Al

  • How can I make IPhone 4 "invisible" when Bluetooth is switched on?

    How can I make my Iphone 4 invisible when Bluetooth is switched on???
    Peter

    If your phone is not jailbroken, they will not be able to connect to it. It will not be discoverable unless you go into the bluetooth settings page on the phone, which makes it discoverable. If people are attempting to connect to it, I'll lay odds that FAST&FURIOUS is correct in his guess that your phone is jailbroken. If that's the case, all bets are off. Jailbreaking compromises the security of your device as well as rendering the warranty void.

  • How can I make the Thumpnail  visible in WIN Explorer?

    My OS is Windows8/64.
    My product is PSE11.
    How can I make the Thumpnail ( Preview ) visible in Explorer ?
    Mein OS ist Windows8/64.
    Mein Produkt ist PSE11.
    Wie kann ich die Thumpnail (Vorschau) im Explorer sichtbar machen?

    Right mouse on the graph and select common plots. Under there you can select how you want to display your information. After selecting the display with points, you can go further down the list to Point Style to choose circles,squares etc....

  • How can I make playlist changes on my iPhone 6 the default sync with iTunes?

    I'm far more often using my iPhone to make iTunes purchases and make changes to my playlists- how can I make *these* the default settings by which iTunes syncs? I have iTunes match, iCloud, etc. Mainly I'd like to easily have iTunes match my iPhone changes, and then when I sync my iPod nano via usb, have the iTunes (ergo iPhone) changes made to the iPod.
    Thanks in advance!

    I'm far more often using my iPhone to make iTunes purchases and make changes to my playlists- how can I make *these* the default settings by which iTunes syncs? I have iTunes match, iCloud, etc. Mainly I'd like to easily have iTunes match my iPhone changes, and then when I sync my iPod nano via usb, have the iTunes (ergo iPhone) changes made to the iPod.
    Thanks in advance!

  • How can I make sure my IPad is using the wirless internet inmy house and not the 3G?

    How can I make sure my IPad 2 is using the wireless internet in my house and not the 3G? I don't want to be charge for data usage by my carrier.

    Turn off the Celular Data option in your ipad setting. You will see the name of your 3g service provider gone from top left corner.

  • How can I make the points visible in Graph

    HI,
    I have a graph which plots certain points. I want the graph to also make the points visible - not just the lines between the points.
    How can I do that
    Thanks

    Right mouse on the graph and select common plots. Under there you can select how you want to display your information. After selecting the display with points, you can go further down the list to Point Style to choose circles,squares etc....

Maybe you are looking for