How can I output a digital value (0 or 1) directly with a VI on the RTSI-bus?

The Device is a PCI-MIO-16XE10.
Thanks.

The RTSI bus is designed for sharing timing and control signals between boards. By timing and control we mean clock signals, digital triggers, etc. RTSI is not meant to pass I/O signals, even digital I/O signals. Thus, it is not possible to connect one of the digital I/O lines on your board to a RTSI line. A way to accomplish what you would like to do might be to toggle GPCTR0's Output and connect that signal to the RTSI bus. You would do this by configuring the counter to perform event counting and counting down from a specified number of pulses on the source pin and configuring the counter's output to toggle on terminal count. You could also configure the counter to perform pulse train generation or single pulse generation. To connect the output to the RTSI bus, yo
u will need to call the Route Signal VI from the DAQ Calibration & Configuration Function Pallette with Signal Name set to RTSIn and Signal Source set to GPCTR0 Output.
Regards,
Erin

Similar Messages

How can I share a guitar track from garageband ipad DIRECTLY with another iPad with garageband?!

How can I share a guitar track from garageband iPad DIRECTLY to another iPad with garageband...it would be so easy to just email the track!!!

Use 3rd party apps to transfer video from one iPad to the other.
http://i1224.photobucket.com/albums/ee374/Diavonex/Album%205/79b3173fda7b6a6e148 5b463198f6acf.jpg

How can I sync my iPhone music to my new Mac with out loosing my the music I already have in the phone?

Bought a new Mac and iTunes won't let me sync new music to my phone because I used to sync it in my old Mac. How can I sync with the new PC with out loosing the music I already have in my phone?

Copy everything from your old computer to your new one then sync.
Iphone will sync with one library/computer at a time. Syncing to another will indeed erase the current content.

How can I sync my ipod 6g. to a new computer with out losing all the info

My computer is starting to fail so I bought a new one. How do I sync my ipods they are 6 gen to the new computer with out losing all the data that is on the ipod?

Was your iPod previously set up to Manually Manage (where you dragged/dropped the music) or was it set to auto sync (where it started sycning as soon as you plugged it in.)?
If it was set to Manual, you have no worries. Just continue on your way.
If it was set to Auto, you will have to transfer your purchases or redownload them from the iTunes store.
You're either going to have to get the other music back from the websites/CDs you got them from before or find an iPod ripping software program that will do it for you.

How can i select other column values('-' separated) in group by function

CREATE TABLE EMP (
     EMPNO NUMBER(4) NOT NULL,
     ENAME VARCHAR2(10),
     JOB VARCHAR2(9),
     SAL NUMBER(7)
INSERT INTO EMP(EMPNO, ENAME, JOB, SAL) VALUES (7369, 'SMITH', 'CLERK', 800);
INSERT INTO EMP(EMPNO, ENAME, JOB, SAL) VALUES (7499, 'SMITH', 'SALESMAN', 1600);
INSERT INTO EMP(EMPNO, ENAME, JOB, SAL) VALUES (7521, 'ALLEN', 'SALESMAN', 2400);
In Output I want 3 columns : EMP,SUM(SAL),JOB(hyphenSeparated)
Means i want my output like
First row : SMITH,2400,CLERK-SALESMAN
Second row : ALLEN,2400,SALESMAN
I tried to write following sql : select ename,sum(sal) from emp group by ename
But i want other colummn value in '-' separated. but group by is only allowing agreegated function.
How can i select other column value using group by function.

SQL> select ename,sum(sal), listagg(job, '-') within group (order by job) as job from emp group by ename;
ENAME        SUM(SAL) JOB
ALLEN            2400 SALESMAN
SMITH            2400 CLERK-SALESMANnote: LISTAGG is a feature of 11.2

How can I limit a double value to two decimal place?

How can I limit a double value to two decimal place?
Java keeps on adding zero's to a simple double subtraction:
1497 - 179.64 = 1317.3600000000001The answer must have been simply: 1317.36

If the trouble is with output ...
If the trouble is with value accuracy ...The trouble is with OPs understanding of and/or expectations of IEEE 754 floating point numbers. o_O
[And it's probably a view (output) issue.]
how can i actually use numberformat to cut those
unwanted decimal places?Read the API - Puce already provided the link.

How can i get all these values in single row with comma separated?

I have a table "abxx" with column "absg" Number(3)
which is having following rows
absg
1
3
56
232
43
436
23
677
545
367
xxxxxx No of rows
How can i get all these values in single row with comma separated?
Like
output_absg
1,3,56,232,43,436,23,677,545,367,..,..,...............
Can you send the query Plz!

These all will do the same
create or replace type string_agg_type as object
2 (
3 total varchar2(4000),
4
5 static function
6 ODCIAggregateInitialize(sctx IN OUT string_agg_type )
7 return number,
8
9 member function
10 ODCIAggregateIterate(self IN OUT string_agg_type ,
11 value IN varchar2 )
12 return number,
13
14 member function
15 ODCIAggregateTerminate(self IN string_agg_type,
16 returnValue OUT varchar2,
17 flags IN number)
18 return number,
19
20 member function
21 ODCIAggregateMerge(self IN OUT string_agg_type,
22 ctx2 IN string_agg_type)
23 return number
24 );
25 /
create or replace type body string_agg_type
2 is
3
4 static function ODCIAggregateInitialize(sctx IN OUT string_agg_type)
5 return number
6 is
7 begin
8 sctx := string_agg_type( null );
9 return ODCIConst.Success;
10 end;
11
12 member function ODCIAggregateIterate(self IN OUT string_agg_type,
13 value IN varchar2 )
14 return number
15 is
16 begin
17 self.total := self.total || ',' || value;
18 return ODCIConst.Success;
19 end;
20
21 member function ODCIAggregateTerminate(self IN string_agg_type,
22 returnValue OUT varchar2,
23 flags IN number)
24 return number
25 is
26 begin
27 returnValue := ltrim(self.total,',');
28 return ODCIConst.Success;
29 end;
30
31 member function ODCIAggregateMerge(self IN OUT string_agg_type,
32 ctx2 IN string_agg_type)
33 return number
34 is
35 begin
36 self.total := self.total || ctx2.total;
37 return ODCIConst.Success;
38 end;
39
40
41 end;
42 /
Type body created.
[email protected]>
[email protected]> CREATE or replace
2 FUNCTION stragg(input varchar2 )
3 RETURN varchar2
4 PARALLEL_ENABLE AGGREGATE USING string_agg_type;
5 /
CREATE OR REPLACE FUNCTION get_employees (p_deptno in emp.deptno%TYPE)
RETURN VARCHAR2
IS
l_text VARCHAR2(32767) := NULL;
BEGIN
FOR cur_rec IN (SELECT ename FROM emp WHERE deptno = p_deptno) LOOP
l_text := l_text || ',' || cur_rec.ename;
END LOOP;
RETURN LTRIM(l_text, ',');
END;
SHOW ERRORS
The function can then be incorporated into a query as follows.
COLUMN employees FORMAT A50
SELECT deptno,
get_employees(deptno) AS employees
FROM emp
GROUP by deptno;
###########################################3
SELECT SUBSTR(STR,2) FROM
(SELECT SYS_CONNECT_BY_PATH(n,',')
STR ,LENGTH(SYS_CONNECT_BY_PATH(n,',')) LN
FROM
SELECT N,rownum rn from t )
CONNECT BY rn = PRIOR RN+1
ORDER BY LN desc )
WHERE ROWNUM=1
declare
str varchar2(32767);
begin
for i in (select sal from emp) loop
str:= str || i.sal ||',' ;
end loop;
dbms_output.put_line(str);
end;
COLUMN employees FORMAT A50
SELECT e.deptno,
get_employees(e.deptno) AS employees
FROM (SELECT DISTINCT deptno
FROM emp) e;
DEPTNO EMPLOYEES
10 CLARK,KING,MILLER
20 SMITH,JONES,SCOTT,ADAMS,FORD
30 ALLEN,WARD,MARTIN,BLAKE,TURNER,JAMES
CREATE OR REPLACE FUNCTION concatenate_list (p_cursor IN SYS_REFCURSOR)
RETURN VARCHAR2
IS
l_return VARCHAR2(32767);
l_temp VARCHAR2(32767);
BEGIN
LOOP
FETCH p_cursor
INTO l_temp;
EXIT WHEN p_cursor%NOTFOUND;
l_return := l_return || ',' || l_temp;
END LOOP;
RETURN LTRIM(l_return, ',');
END;
COLUMN employees FORMAT A50
SELECT e1.deptno,
concatenate_list(CURSOR(SELECT e2.ename FROM emp e2 WHERE e2.deptno = e1.deptno)) employees
FROM emp e1
GROUP BY e1.deptno;
DEPTNO EMPLOYEES
10 CLARK,KING,MILLER
20 SMITH,JONES,SCOTT,ADAMS,FORD
30 ALLEN,WARD,MARTIN,BLAKE,TURNER,JAMES
CREATE OR REPLACE TYPE t_string_agg AS OBJECT
g_string VARCHAR2(32767),
STATIC FUNCTION ODCIAggregateInitialize(sctx IN OUT t_string_agg)
RETURN NUMBER,
MEMBER FUNCTION ODCIAggregateIterate(self IN OUT t_string_agg,
value IN VARCHAR2 )
RETURN NUMBER,
MEMBER FUNCTION ODCIAggregateTerminate(self IN t_string_agg,
returnValue OUT VARCHAR2,
flags IN NUMBER)
RETURN NUMBER,
MEMBER FUNCTION ODCIAggregateMerge(self IN OUT t_string_agg,
ctx2 IN t_string_agg)
RETURN NUMBER
SHOW ERRORS
CREATE OR REPLACE TYPE BODY t_string_agg IS
STATIC FUNCTION ODCIAggregateInitialize(sctx IN OUT t_string_agg)
RETURN NUMBER IS
BEGIN
sctx := t_string_agg(NULL);
RETURN ODCIConst.Success;
END;
MEMBER FUNCTION ODCIAggregateIterate(self IN OUT t_string_agg,
value IN VARCHAR2 )
RETURN NUMBER IS
BEGIN
SELF.g_string := self.g_string || ',' || value;
RETURN ODCIConst.Success;
END;
MEMBER FUNCTION ODCIAggregateTerminate(self IN t_string_agg,
returnValue OUT VARCHAR2,
flags IN NUMBER)
RETURN NUMBER IS
BEGIN
returnValue := RTRIM(LTRIM(SELF.g_string, ','), ',');
RETURN ODCIConst.Success;
END;
MEMBER FUNCTION ODCIAggregateMerge(self IN OUT t_string_agg,
ctx2 IN t_string_agg)
RETURN NUMBER IS
BEGIN
SELF.g_string := SELF.g_string || ',' || ctx2.g_string;
RETURN ODCIConst.Success;
END;
END;
SHOW ERRORS
CREATE OR REPLACE FUNCTION string_agg (p_input VARCHAR2)
RETURN VARCHAR2
PARALLEL_ENABLE AGGREGATE USING t_string_agg;
/

How Can I get multi column values from dynamic search help?

Hi Gurus;
I'm using dynamic search help in my program.
I want to get multi column values from search help. But I dont know solution for this issue.
I'm using F4IF_INT_TABLE_VALUE_REQUEST FM.
How Can I get multi column values from dynamic search help?
Thanks.

Believe it or not, the same FM worked for me in a dynpro. I will try to explain here how it works in custom screen and then you can do your work for other screens or program types. I am not going to write my actual work but will explain in general.
I have 4 fields (FLD1, FLD2, FLD3, FLD4) and i made the search based on FLD2 and when user click on a line (could be any field), then this would bring the line on to the screens.
There are like 3 steps.
You have your value_tab for my fields FLD1, FLD2, FLD3 and FLD4. This is just the data that we pass into the FM. (data: IT_VALTAB type table of ZVAL_TABLE)
Next map the screen fields into an internal table (data: It_dynpfld type table of dselc ). I also have other internal tables defined (just to keep it straight, i will be putting here) data: It_return type standard table of ddshretval.
Next step is to call the function module. Make sure you have values in IT_VALTAB.
call function 'F4IF_INT_TABLE_VALUE_REQUEST'
exporting
 retfield = 'FLD2'
 value_org = 'S'
 tables
 value_tab = It_VALTAB
 return_tab = It_return
 dynpfld_mapping = It_dynpfld
 exceptions
 parameter_error = 1
 no_values_found = 2
 others = 3.
 if sy-subrc <> 0.
 message id sy-msgid type sy-msgty number sy-msgno
 with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
 else.
 perform get_selected_fields tables It_return.
 endif.
The code within the perform GET_SELECTED_FIELDS - We need to map the result fields after user selects it. The code goes like this. This is step is to update the dynpro fields.
I need a internal table as well as a work area here. like,
data: lt_fields type table of dynpread,
 la_fields type dynpread.
field-symbols: <fs_return> type ddshretval.
so fill out LT_FIELDS from the IT_RETURN table
loop at lt_return assigning <fs_return>.
 la_fields-fieldname = <fs_return>-retfield.
 la_fields-fieldvalue = <fs_return>-fieldval.
 append la_fields to lt_fields.
 clear: la_fields.
endloop.
Call the FM to update the dynpro
call function 'DYNP_VALUES_UPDATE'
 exporting
 dyname = sy-repid
 dynumb = '1002' "This is my screen number. You could use 1000 for selection screen (hope so)
 tables
 dynpfields = lt_fields
 exceptions
 invalid_abapworkarea = 1
 invalid_dynprofield = 2
 invalid_dynproname = 3
 invalid_dynpronummer = 4
 invalid_request = 5
 no_fielddescription = 6
 undefind_error = 7
 others = 8.
if sy-subrc <> 0.
 message id sy-msgid type sy-msgty number sy-msgno
 with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
good luck

How can I output text in a browser window in JAVA?

How can I output text in a browser window in JAVA?

"response.getWriter().print()" is the most common method when using servlets

How can i transfer a digital movie from one apple id to another apple id?

how can i transfer a digital movie from one apple id to another apple id?

You buy it from that ID or ask the iTunes Store staff for assistance.
(80985)

HOW CAN I PASS A DEFAULT VALUE IN INTERNAL TABLE

HOW CAN I PASS A DEFAULT VALUE IN INTERNAL TABLE.
DATA : BEGIN OF ITAB OCCURS 0,
           FIELD1(2) TYPC C DEFAULT   '12',
           FIELD2     TYPE C ,
           END OF ITAB1.
IT'S GIVING ERROR MESSAGE.
PLZ LOOK INTO THIS AND GIVE ME CORRECT SOLUTION.
THANKS
SURI

DATA : BEGIN OF ITAB OCCURS 0,
FIELD1(2) TYPC C,
FIELD2 TYPE C ,
END OF ITAB1.
itab-field1 = '12'.
itab-field2 = 'A'.
append itab.
clear itab-field2.
itab-field1 = '12'.
itab-field2 = 'B'.
append itab.
clear itab-field2.
Now everytime u'll have the value for field1 = '12'.
Regards
Vasu

How can I implement a Digital I/O counter with a maximum source frequency of 80 MHz (like 6602 board) using CompactRIO?

How can I implement a Digital I/O counter with a maximum source frequency of 80 MHz (like 6602 board) using CompactRIO? It appears as if the Digital I/O modules for CompactRIO are much slower than this.
Thank you,
--Ray

Hi Ray,
The highest frequency input we offer for C Series modules is 20 MHz if you are doing LVTTL and 10 MHz for 5 V TTL. These modules are the 9402 and 9401, respectively. Unfortunately, there is no 80 MHz input on this form-factor.
Regards,
Chris E.
Applications Engineer
National Instruments
http://www.ni.com/support

How Can I Set a Javascript Value into an Attribute of BSP PAGE

Hi
Can anyone tell me.
How Can I Set a Javascript Value into an Attribute of BSP PAGE

Hi Mithlesh,
javascript runs on client side and you cannot assign the value to a Page attribute directly.
As a workaround,you can use an Inputfield,hidden if required,and set the value using javascript.Then the form will have to be submit to be able to read the value in onInputProcessing and then can be assigned to any variable.
In Layout
<head>
<script language="javascript">
function pass()
 txt1 = document.getElementById("ip_mrf");
 txt.value = "hello" ;
</script>
</head>
<htmlb:inputField id="ip_mrf"
 value="<%=mrf_number%>"
 visible="FALSE"/>
in onInputProcessing
cha1 = request->get_form_field( 'ip_mrf' ).
where cha1 is the page attribute
hope this helps,
Regards,
Siddhartha
Message was edited by: Siddhartha Jain

How can i transfer a field value in the main report to its sub-report?

How can i transfer a field value in the main report to its sub-report?Please eloberate with example if possible!Thanks... 

You can do a couple of things - one would be to pass the information using the data linking expert. Right click on the subreport, choose 'Change Subreport Links' and select the field(s) you are wanting to pass to the subreport. CRW will build parameters and a record selection formula for you in the subreport, and if that's what you want, then great. But you can also remove the selection formula from the subreport and work with the parameter fields in the subreport however you would like.Alternatively, you can look to passing Shared variables back and forth from the main and subreport. this link talks about the method to do this: http://diamond.businessobjects.com/node/251

Using action script 2 how can i send a variable value to a dynamic textbox on a different keyframe?

using action script 2 how can i send a variable value to a dynamic textbox on a different keyframe?

Thanks for your swift response.
That sounds like a good solution, but the code I have on frame 2 is this
timer = 0;
countup = function(){
timer++;
countupInterval = setInterval(countup,100);
If I added the same actionscript to frame 3 which has a dynamic textbox with a variable timer attached wouldn't it just put the timer back to 0? What I want is the last known value that was given when it was in frame 2.
I am thinking of temple run here, I am trying to caculate the total distance(set in the timer variable) from the previous try.
Hope this makes sense.
Chazwick

How can I output a digital value (0 or 1) directly with a VI on the RTSI-bus?

Similar Messages

Maybe you are looking for