How can I paint a line to the XY-plane specified??

How can I get XY-plane that is specified before???
because I want add a line to the XY-plane!!
thanks in advance!

If you want to draw a line in the xy plane, make two points with z=0, add them to a LineArray, set the geometry of a shape3d to the lineArray and put the shape3d into the branchgroup of a simpleUniverse.
Good luck
:-)

Similar Messages

How can we delete a line from the table control .

hi all
how can we delete a line from the table control .
situation is.
created table control in se51 which will display the data of a table.
how could i select a line from the table control ?
how could i delete the selected lines form the table.
thanks in advance

Change the Table Control attributes such that user can only select a single record(row).
<u>Tip to delete a selected record</u>
1) write a module 'Mark' in the PAI as below
PROCESS AFTER INPUT.
MODULE cancel AT EXIT-COMMAND.
LOOP WITH CONTROL table_view.
MODULE read_table_control.
FIELD flag MODULE mark ON INPUT.
ENDLOOP.
MODULE user_command_0100.
2) Module Mark is below.
MODULE mark INPUT.
CHECK flag = 'X'.
x = table_view-top_line + sy-stepl - 1.
Delete itab INDEX x.
ENDMODULE. " mark INPUT
Table_view is the TableControl Name.
'flag' is of type char(1) available in the Internal table which was assigned to the select option in the table control.
<u>award if uesful</u>
Regards,
Sudheer

How can I know which line contains the error in JSP

Hello, I got following compiling error:
ava.lang.NullPointerException
at org.apache.jsp.temp1Public_jsp._jspService(temp1Public_jsp.java:252)"
Is there a way I can know in which line of the jsp page the null pointer exception occurs.
"line 252 " doesn't seem to help a lot, since it refers to the rendered java file.
Thanks so much.
Oriental Spirit.

Hello, I got following compiling error:
ava.lang.NullPointerException
at
org.apache.jsp.temp1Public_jsp._jspService(temp1Public
jsp.java:252)"
Is there a way I can know in which line of the jsp
page the null pointer exception occurs.
"line 252 " doesn't seem to help a lot, since it
refers to the rendered java file.As far as I know, no. If you are using an IDE that supports JSP compilation, then it may let you click on the error and take you directly to the JSP (e.g. Forte/Netbeans or Jbuilder will do this).

How can I cancel my subscription if the "Cancel Plan" link does not appear in the screen?

From your manual, you instruct the users to cancel the plan by accessing the manage plan screen and then click on the Cancel Plan button.
However, how can the user cancel the plan if the Cancel link does not appear in the membership details screen?

You need Adobe support to cancel a subscription
-cancel http://helpx.adobe.com/x-productkb/policy-pricing/return-cancel-or-change-order.html
-or http://helpx.adobe.com/x-productkb/policy-pricing/cancel-membership-subscription.html
-or by telephone http://helpx.adobe.com/x-productkb/global/phone-support-orders.html

How can I remove telephone lines and the like, on PS CC?

Hi,
I have done this already but for the life of me I just cant remember how I did it (it was just so easy!!!) and i cant find it in answers either.
Please how do you do it?
Thanks
Serge

Yes those can be used but with CC there is a neater way by simply clicking at the two extremities and pouf it goes away...
But I dont remember how to do it
Thanks
Serge

How can we delete a dimension from the classic planning applications

Hi Friends,
I am trying to delete a dimension from the planning classic application but i am unable to find out the delete option to delete a dimension. I created the dimension from the Administration -->dimensions --> Add dimension.
If we want to delete a dimension how we can delete that dimension, I heard meta data is stored in the RDBMS so that why if we want delete dimension we need to delete in RDBMS so please tell me the location in RDBMS to delete dimension. i am using sql is RDBMS.
Thanks in advance......

As John mentioned, it is not supported and advisiable to delete a dimension from Planning application. but yes you can take a chance with some risk if you need to do so.. this opertaion is tested in 9.2 but i never tried in EPM V11.
You will need to delete all the children first, then the dimension.
BE SURE YOU HAVE A BACKUP OF YOUR APPLICATION BEFOREATTEMPTING THIS PROCEDURE.
You will need to delete all the children first, then the dimension.
If you have the dimension in forms, you may also need to (after step 5) go into the hsp_formobj_def_mbr table and delete all references of that object ID. Then delete the dim id in thehsp_form_layout table. Recycle services of Planning.
Procedure: If you create a custom dimension in planning and wish to delete it, here is how you might remove it from SQL manually.
it is recommended that only someone familiar with relational databases attempt this.The following assumptions are being made about the dimension: No forms have any references to thedimension. Any and all attribute dimensions have been removed from the dimension. Any and all members have been removed from the dimension. All security access has been removed from dimension. Any Alias associated with the dimension has been removed.
1. Open the Enterprise Manager for SQL server
2. Open the database that has your planning application
3. Open the table HSP_OBJECT
4. You need to find the row that has the dimension name you want to delete:
5. Take note of the OBJECT_ID in my example it is50051, don't delete it yet.
6. Open the table HSP_MEMBER
7. Find and delete any rows that have a MEMBER_ID equal to the OBJECT_ID from step 5.
8. Close the Table HSP_MEMBER
9. Open the table HSP_MRU_MEMBERS.
10. Find and delete any rows that have a DIM_ID equal to the OBJECT_ID from step 5.
11. Close the table HSP_MRU_MEMBERS.
12. Open the table HSP_DIMENSION
13. Find and delete any rows that have a DIM_ID equal to the OBJECT_ID from step 5.
14. Close the table HSP_DIMENSION
15. Also delete it's reference from the HSP_UNIQUE_NAMES table.
16. Delete the row in the HSP_OBJECT table that you found in step 4.
17. Close the HSP_OBJECT table.
18. Open Essbase Application Manager for the application and remove the dimension from the necessary Essbase outlines
19. Restart the application server.
good luck!!!
-KP

How can you change your line access selection? I have found where you can change your plan selection, but can you change the line access fee or is that a set amount?

How can you change your line access selection? I have found where you can change your plan selection, but can you change the line access fee or is that a set amount?

DIVAB71,
Great question. The line access fees for the account are a set amount and can not be changed unless you are going from a basic to a smartphone or vice versa. If you are wondering about adding the month to month discount if you are out of contract Ann154 has provided great information on how to access and add the feature.
LindseyT_VZW
Follow us on Twitter @VZWSupport

I accidentally hit the REMOVE FROM LINE button on my Premium Voice Mail. How can I get it back? The only options I found was visual voice mails.

I accidentally hit the REMOVE FROM LINE button on my Premium Voice Mail. How can I get it back? The only options I found was visual voice mails.

TheAshburns,
No worries, we can get you back on the road with the correct voicemail service. Just to be clear, did you want to readd Premium Visual Voicemail? If so, click the link and select question #7 for steps http://www.verizonwireless.com/support/visual-voice-mail-faqs/?lid=sayt&sayt=visual%20voic*
SandyS_VZW
Follow us on Twitter @VZWSupport
If my response answered your question please click the �Correct Answer� button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

How can I add a line but keep the number I have from tmobile

How can I add a line but keep the number I have from Tmobile

Hi, Janice!
I'm just guessing, but I imagine you'd get your question answered faster in the AE forum.

CS4: How can I copy named potions of the time line to the projects panel?

I am trying to copy named portion of my time line to the project panel & I can't past the segment.
I copied a large AVI file to the time line, split it up into sections, & am trying to place the individual rename section into the Projects Panel. I can Copy the segment, but when I try to Paste it into the Projects Panel the Paste command is not "lighted up".
How can I copy named potions of the time line to the projects panel?

I found a way albeit a tedious method:
positioned the render bar( I do not know the proper name) to encompass each segment separately.
Exported that segment to Media.
Media in turn transferred the segment to the Media Encoder program.
The Media Encoder, after processing the segments, deposited the files in a temporary folder.
Lastly, imported the content of the folder to the Project Panel,
Thank you for all your suggestions.

How can I get "IMAQ Line Fit" stable (with the same points)

How can I get "IMAQ Line Fit" stable (with the same points)
I my vision applications I use a lot off times "IMAQ Line Fit"
some times the results are not Stable.
See vi and word document attached.
When I take the same points but in a other order (sort)
then suddenly all points are used.
In this case I was looking for a edge in vertical direction (Y).
I found the points but "IMAQ Line Fit" did not function well.
I tried changing all settings like pixel radius and minimum score and
also threshold and so on. But no result.
Then I sorted the points reversed and that worked. See vi.
I use labview Labview 8.6.0 and IMAQ machine vision.
Maybe this problem is solved in a newer version.
Please let me know.
Thanks
Attachments:
TEST-imaq-line-fit-86.vi ‏169 KB
IMAQ-Fit-Line-Problem-86.doc ‏230 KB

Thank You for your reaction Hossein,
This "one application" uses "Line fit" about 20 000 000 times a day.
about 200 will go wrong. With your setting the the "Line fit" for this occasion will work but others will go wrong.
A algorithm should be:
1e Stable, when using the same points and settings the result MUST be the same. How the points are sorted should not matter.
2e Accuracy
3e Speed
4e Testing. Is very difficult but al least close points and the same points and sorting ... should be done
NI now as made a " IMAQ Line Fit" Problem CAR (Corrective Action request) 298016.
so in the future there will be a update.
In the mean while a made a line fit which uses Bisquare option from Linear Fit.vi :
from C:\Program Files\National Instruments\LabVIEW 8.6\vi.lib\analysis\6fits.llb
This is a temporary fix because "IMAQ Fit Line VI" is not so stable.
Because outliers should be rejected only Bisquare does this reasonable.
This program does NOT USE "Minimum Score" and "Pixel Radius"
Valid fit = When there are enough points within Outlier_Distance.
Algorithm steps:
- Determine if line is more horizontal then vertical, Compare DeltaX with DeltaY
- If DeltaX <= DeltaY then SWAP X Y and later Swap back
- Sort Points at on X value
- First : Bisquare Linear Fit
- Calculate distances to the found line for all points
- Inliers: Points within Outlier_distance
- Outliers: Points outside Outlier_Distance
- Only use Inlier Points
- Check again if DeltaX < DeltaY then SWAP X Y later SWAP back again
- Second : Bisquare Linear Fit only with the Inlier Points
- Results are from the second fit
Warning : This Program is Not so accurate and Not so fast
See attachments it is in labview 8.6
If some has a improvement please let me know.
Thanks
Attachments:
svi_fit_line_Bsquare_and_draw.vi ‏18 KB
Fit_Line_Bisquare_Linear.vi ‏40 KB

How can I draw a line in Preview without the arrow head

Hello all!
How can I draw a line in Preview without the arrow head at the end of the line?

Yes. Once you select the line bar a new entry will appear where you can select what type of line. Based on my experience whether or not it will change is iffy.

How can I get someone to answer the phone? I'm ready to give VERIZON my business. I sat on the phone for over 20 minutes only to be transferred to "Sales." I then sat on the phone for another 15 minutes!!!! I finally hung up.

How can I get someone to answer the phone? I'm ready to give VERIZON my business. I sat on the phone for over 20 minutes only to be transferred to "Sales." I then sat on the phone for another 15 minutes!!!! I finally hung up.

It takes an enormous amount of patience and time to get through to a qualified person.
My Samsung S5 was locked out and needed a factory reset. Including attempts to achieve this locally, it took over an hour before my problem was even addressed.
You may be interested in my journey to a very good technical support person.
First I called the local sales person who had given me his personal business card with the friendly advice to call me with any questions. No answer at about 8:30 am when the business was open. His voice mailbox was full.
Then I called the local store where I had purchased the phone. The person who answered the phone had learned all the proper stock phrases, but was not familiar with the issue, stated that there were no customers in the store, and I should go there in about an hour when there would be more staff. He suggested dialing *411 from my phone (which was locked). Then he gave me a number to call Verizon, which he had to look up, and it took a minute or so. The number was (removed). That is an internal number for employees and contractors and requires a code to access, obviously not designed for customers' use. He finally cut me off by stating that there were a number of customers in line waiting for his attention!
After researching all my papers I found 800-922-0204 on my bill. The automated message suggested a hold time of 5 minutes, it took 20 minutes for a Customer Service Representative to pick up, and then I was referred to technical assistance. The hold time was announced to take 5 minutes, after 12 minutes I finally was connected.
Fortunately I had my computer set up for Skype on a loudspeaker, and was able to do some other paperwork while waiting.
Persistence was rewarded by having the good fortune to be connected to a very experienced, qualified and patient technical support staff with the name of Thomas (removed). He solved my problem, answered my questions during the process of resetting the phone, and gave an example of courteous and kind customer service that I had never experienced before when dealing with any major internet company.
>> Edited to comply with the Verizon Wireless Terms of Service <<
Edited by: Verizon Moderator

How can I import data in to the digital word generator in Multisim?

How can I import data in to the digital word generator in Multisim?
I just received this comment from a friend, a RADAR engineer, who has just down loaded Multisim. He has been using HP/Agilent software. He has a work around using a piecewise linear voltage waveform with data imported from Excel but this is not really a good solution. It would also be helpful to import data from Mathcad or equivalent.
"I thought I was about to be impressed with MultiSim but it ended only in disappointment. There is a word generator in the simulation instrument panel which can drive the DAC with a waveform and it can have thousands of lines of values. I opened Excel, wrote the formula to generate the time and voltage points for a chirp, converted to DAC values in Hex and then went back to the word generator in MultiSim to load the values only to find that you have to enter each value manually. It doesn’t even allow you to paste in a list of values from a text file. I’m not going to type 5000 values by hand. If you get the chance to give feedback to National Instruments please ask them if the paste option can be added to the word generator. MultiSim is useful in many regards, but in this case, it left me with the impression that it is considerably limited in capability compared to what I’m used to."

Hi,
You can load your data automatically in the Multisim word generator. Follow these steps:
- Save your data file (in excel .xslx ir .csv format) on your computer
- Change the extension of the file to ".dp"
- Double-click the word generator in Multisim and click on Set...
- In the Settings dialog box, click on Load and then Accept
- This will prompt you to select the .dp file you have on your computer, select it and you're good to go
However, in Multisim you have the option of creating your own custom simulation analysis and instrument.
I will try creating the instrument and send it back to you but it might take some time.
Multisim and LabVIEW are very powerful in test automation, with the custom instruments you create for Multisim you don't need to export your data file into excel from LabVIEW (or MathCAD or other tools) and then reload it into Multisim. The test procedure is automated instead.
Please check this reference design about automated simulation
http://zone.ni.com/devzone/cda/tut/p/id/7825
Here is how you can create your own custom measurement tool in Multisim and LabVIEW, but as I mentioned, I will create the word generator and come back to you anyways
http://zone.ni.com/devzone/cda/tut/p/id/5635
Let me know if you have any questions.
Mahmoud W
National Instruments

How can I use more lines to show a field of a row in a report?

How can I use more lines to show a field of a row in a report? Table A have two columns: (c1 number(5),c2 varchar2(1000)).When I show the table on a report,the column c2 show itself in one row.So the width of html page is very wide.How can I split the field c2 to many lines?
Thanks for any help.

I was wondering if an answer was found for this one.
I have the same problem using the default "Look 4" template for the region. I have found in the CSS file where it is defined and it specifies "nowrap" in the style, which is why the long value is not being split over multiple lines.
So, my question is, without modifying or creating templates, is there a way to override the "nowrap" attribute from within the item definition? e.g. in the Column Attributes.Column Formatting.CSS Style field. I had some success changing the display properties, such as background colour and font size but I can't seen to override the nowrap attribute!

How can I paint a line to the XY-plane specified??

Similar Messages

Maybe you are looking for