How can i pass formatted text to PDF format

i have tried to pass text to a txt file, however, it is unformatted and the text are shifted. Can anyone help me?

you mean you want to create a PDF from your program? Take a look at this: http://xml.apache.org/fop/index.html

Similar Messages

How I can save report (graphics & text) in PDF format in LV6i?

I am new to LabView. I tried to save the report as HTML document, it works well using vi's from report generation pallet. But the problem is HTML stores graphic images and text as multiple files. My requirement is to have one single file (like PDF format) to store the results/report of the process.
Any help in this problem will be greatly appreciated.

MattI wrote in message news:<[email protected]>...
> Actually, this is really easy.
>
> Just open the .html file from within Word, and then save it as a Word
> file.
>
> After this, if you have Adobe Acrobat installed, you can create a pdf
> of the Word file.
You could write a batch file that prints to a PS file using a PS
Printer driver and then runs GhostScript to automate the PS -> PDF
conversion. There is no need to buy a MS or Adobe product.
A big of searchign and you'll probably find some ghostscript addon for
HTLM->PS->PDF conversion

How can I create sharp screenshots in PDF format?

I would like to create sharp screenshots in PDF format, but whenever I use Grab (Version 1.3(90)) for my screenshots the images turn out to be somewhat fuzzy. The shots that I want to take are of the whole screen, with the browser Safari open, showing webpages with significant detail. I use Grab, and then convert to PDF. I import those files into Latex using TexShop. The images turn out to be fuzzy. If projected on a large screen, I can't read the text in the webpage. It is as if someone with a trembling hand had held a camera at the screen. Is there any way of creating sharp screenshots in PDF? Many thanks for any help.

Hi tilmat,
first of all: WELCOME TO THE DISCUSSIONS!
The sharpness of screenshots is limited by the resolution of the screen. A normal CRT-display has a resolution of 72 dpi which is less than half the resolution of 150 dpi you would use for low quality print-outs. So, unless you make the screenshot smaller by a factor of at least 2 it will always be a little blurry.
You can change the format of the screenshots with utilities such as TinkerTool.
If this answered your question please consider granting some stars: Why reward points?

How can I convert a picture in PDF format to Excel?

How can I convert a picture (layout of floor plan) into Excel?

This article shows how to disable OCR during the conversion: https://forums.adobe.com/docs/DOC-3062 - do the opposite to enable it.

How can i pass second text value to the procedure.

Hi ,
I have used APEX_ITEM.TEXT(1,null) Item_name,APEX_ITEM.TEXT(2,null) file_name in a sql query and i should pass these two text value as a input parameter to the Procedure.
So in Process i have written code like
FOR i IN 1 .. APEX_Application.g_f01.COUNT
LOOP
generate_report_data(APEX_Application.g_f01(i)
,APEX_Application.g_f02(i)
END LOOP;
COMMIT;
if i enter values in two text columns then two values are passing to a procedure it's fine.
Here the issue is if i leave the first value as balnk and enter the 2 nd value like Xyz then click on a submit button
so 2 nd value also passing null to the procedure..
please anybody guide on this issue..
Thanks in advance..
Regards
Narender B

Hello Narender,
>
Here the issue is if i leave the first value as balnk and enter the 2 nd value like Xyz then click on a submit button
so 2 nd value also passing null to the procedure..
>
This is happening because of FOR i IN 1 .. APEX_Application.g_f01.COUNT in your procedure:
>
FOR i IN 1 .. APEX_Application.g_f01.COUNT
LOOP
generate_report_data(APEX_Application.g_f01(i)
,APEX_Application.g_f02(i)
END LOOP;
COMMIT;
>
FOR i IN 1 .. APEX_Application.g_f01.COUNT this loop will take only those values of apex_application.g_f01 into consideration whose value is not null.
Hope it helps!
Regards,
Kiran

How can I send my resume in PDF format, when a website asks to upload one, all the options I get are choose existing ie upload a picture, or take a picture... No options are available to upload a document I am using an IPad 4 to do this..

I am trying to send my resume, cv, up to recruitment agencies, I am using my iPad, and I have no options to upload when requested from my iPad... Can anyone offer any help... Why is the iPad so restrictive when used as a mobile office solution.

I am trying to send my resume, cv, up to recruitment agencies, I am using my iPad, and I have no options to upload when requested from my iPad... Can anyone offer any help... Why is the iPad so restrictive when used as a mobile office solution.

How can I cancel the text-link in pdf

Hello:
I want to knwon how can I cancel the text-link in pdf forever.
In a pdf , If there is a text like "http://www.adobe.com" ,even it's not a hyperlink,and there is not any action on the text,but it can be clicked.
I have read the "Document management — Portable document format — Part 1:PDF 1.7", I find nothing about this text-link, Is this a function of adobe reader ,or is it required by the PDF format.
I konw adobe reader could turn off the function of text url Identification, then it can not to be clicked ,but what I want to do is cancel the text-link in pdf ,so that whatever is the "text url identification " turned off or turned on , the text can never be clicked.
so,is anybody knwon ,if there is any way to cancel the text-link, to forbiden the text url to be cliecked forever ?
and I also want to knwon if is it required by the PDF format that the text url without any action (not a hyperlink )can be clicked?
grateful for any help
Best regards & Good luck

and I also want to knwon if is it required by the PDF format that the text url without any action (not a hyperlink )can be clicked?
No. It is a feature of Adobe Reader and Adobe Acrobat.

How can I copy and paste a pdf form onto my Mavericks Clipboard. I only see word-wrapped text.

How can I copy and paste a pdf onto my Mavericks Clipboard. I only see word-wrapped text.

Yes, Thank you for using the term Place. You moved my focus off the clipboard, and Place set me back on course. Somewhere, the terms Copy and Paste need to be tagged to Place and Export. I'm a database designer who only uses Illustrator for forms the database fills. My need isn't yet met, but the rest should come with reading the right references. Thanks Larry!

How can I pass a file refnum into and out of external c++ code? What type does it convert to in c++?

I am trying to write external c++ code that will read a file already opened by Labview and therefore assigned a refnum. (Unfortunately, I definately can't use the standard Labview vis.) However I am not sure what c++ type to use in order to manage the refnum.
All help and thoughts appreciated. Thanks,
Joanna

You could do ALL your file handling in C or C++ (MFC CFile for
example) and pass Microsoft file handles into and out of LabVIEW
instead of LabVIEW file references into and out of C. This may be an
easier way to attack the problem.
You could create a DLL in MSVC that exports a FileOpen function, a
FileClose function and a FileRead and/or FileWrite Function and then
call that DLL from place to place as required in your code.
It would help us if you would explain what kind of data you are trying
to read or write and what the application is. Is it binary data?
text files? Do you need some special Win32 file system feature like
file mapped memory? I guess what I am asking is what is your
motivation for doing file handling in C or C++?
Douglas De Clue
LabVIEW developer
[email protected]
"Rolf" wrote in message news:...
> A LabVIEW file refnum is an internal Magic Cookie to LabVIEW and there is no
> way to directly extract the actual information assigned to that Magic
> Cookie.
> However the CIN Reference Manual describes one function which allows to
> retrieve a lower level "File" handle and at least on Windows 32 bit and
> LabVIEW
> from version 5 up to and including 6.1 this "File" LabVIEW datatype directly
> maps
> to the Win32 API "FILE" Handle.
>
> The function to use is
>
> MgErr FRefNumToFD(LVRefNum refNum, File *fdp);
>
> It is declared in extcode.h or one of its dependant headers and exported
> from "labview.lib"
> all located in the cintools directory and you can link this lib also to a
> normal DLL project.
> However calling this DLL then from any other process than LabVIEW or a
> LabVIEW
> executable will not initialize the DLL anymore correctly.
>
> Your best option if you need to write in C(++) should be to use the LabVIEW
> file manager
> functions described on the External Code Manual (manual/lvexcode.pdf) on
> this File handle.
> If you need to use directly some Win32 API functions with it please note
> that although currently
> the "File" in the LabVIEW file manager functions matches the FILE in Windows
> 32 bit API
> functions this is an undocumented and hence unsupported feature. The next
> LabVIEW version
> may actually use a different datatype for its "File" parameter to the
> LabVIEW file manager calls
> and your use of assuming File == FILE may simply crash.
>
> Also operating on a file refnum in LabVIEW which has been accessed directly
> with Win API
> functions may result in strange behaviour such as the file read/write mark
> not being updated as
> you would maybe expect it.
>
> "Jo" wrote in message
> news:50650000000800000016520000-1023576873000@exchange.ni.com...
> > How can I pass a file refnum into and out of external c++ code? What
> > type does it convert to in c++?
> >
> > I am trying to write external c++ code that will read a file already
> > opened by Labview and therefore assigned a refnum. (Unfortunately, I
> > definately can't use the standard Labview vis.) However I am not sure
> > what c++ type to use in order to manage the refnum.
> > All help and thoughts appreciated. Thanks,
> > Joanna

How can I create a text pop up window in my Pages document? I want text to pop up when the reader hovers his/her cursor over a certain word.

How can I create a text pop up window in my Pages document? I want text to pop up when the reader hovers his/her cursor over a certain word in the document. I am teacher. So for example when a student came to word he/she did not know, if he/she hovered the cursor over the word, a defintion or other information would appear. You can do this in Word using bookmarks/hyperlinks but I can't figure this out in Pages. I can link it to another point in my Pages document but I just need the text to pop up - not take the reader to another location. THANK YOU!!!!!!

Have you tried Word for Mac?
You will need to test if links survive export or printing to .pdf
Peter

How can i pass more than 1 param to servlet to show blob image

Hi
my servlet expects 2 param to SELECt an image from a blob column
public class ImageBlobServlet extends HttpServlet {
private static final String CONTENT_TYPE = "text/html; charset=windows-1252";
public void init(ServletConfig config) throws ServletException {
super.init(config);
public void doGet(HttpServletRequest request,
HttpServletResponse response) throws ServletException,
IOException {
response.setContentType(CONTENT_TYPE);
String ImageId = request.getParameter("id");
String TipImg = request.getParameter("tip");
OutputStream os = response.getOutputStream();
Connection conn = null;
try {
Context ctx;
ctx = new InitialContext();
DataSource ds = (DataSource)ctx.lookup("java:/comp/env/jdbc/rhDS");
conn = ds.getConnection();
PreparedStatement statement = conn.prepareStatement("select FIT from " +
"RHH_FOTOS IMG " +
"where IMG.IDASSO = ? and IMG.TIM_COA = ?");
statement.setInt(1, new Integer(ImageId));
statement.setString(2, TipImg);
To display the image i tried to use:
<af:image id="ot1"
*source="/imageblobservlet?id=#{bindings.Con.inputValue}?tip=#{"EMP"}"*
shortDesc="Foto"/>
but i receive all content in the get of first param.
String ImageId = request.getParameter("id");
How can i pass one more then 1 param in EL.
Thanks in advance

Hello,
seems to me you're using wrong separator for the second param into your URL:
<af:image id="ot1" source="/imageblobservlet?id=#{bindings.Con.inputValue}
tip=#{"EMP"}" shortDesc="Foto"/>
I think it should be:
<af:image id="ot1" source="/imageblobservlet?id=#{bindings.Con.inputValue}
tip=#{"EMP"}" shortDesc="Foto"/>
Jack

How can I pass a value into a page fragment?

How can I pass a value into a page fragment?
I am implementing four search screens. And the only thing different about them will be their backing bean.
So I’d like to do something like have four pages, each which retrieves its appropriate backing bean, sets that bean to a variable, and then includes a page fragment which contains the generic search page code (which will make use of that variable).
The code in the four pages would be something like this:
<?xml version='1.0' encoding='windows-1252'?>
<jsp:root xmlns:jsp="http://java.sun.com/JSP/Page" version="2.0"
xmlns:c="http://java.sun.com/jsp/jstl/core">
<jsp:directive.page contentType="text/html;charset=windows-1252"/>
<c:set var="searchPageBackingBean"
value="#{pageFlowScope.employeeSearchPageBean}"
scope="page"/>
<jsp:include page="./SearchPageBody.jsff"/>
</jsp:root>
At this point, what I’m seeing is that the fragment page, SearchPageBody.jsff, has no visibility of the searchPageBackingBean variable, either referencing it as #{pageFlowScope.searchPageBackingBean} or just #{searchPageBackingBean}

The following will work, assuming you are needing to access a managed bean:
Put this in the parent page:
<c:set var="nameOfSearchPageBackingBean"
value="employeeSearchPageBean"
scope="request"/>
Put this in the child, SearchPageBody.jsff:
<c:set var="searchPageBean"
value="#{pageFlowScope[nameOfSearchPageBackingBean]}"
scope="page"/>

How can I create an accessible tagged PDF in Illustrator CS6?

I have put alt text on the slices but when I save the file as a PDF it isn't tagged. How can I use these alt tags to make the PDF accessible? How can I tag the text in the Illustrator file so it is tagged in the PDF?

I do wonder why there are instructions on how to add alt tags in Illustrator, and they only work if you create HTML. It sounds like Illustrator is going to be a legacy product in favour of InDesign, if it can't create tagged PDFs with Alt Tags for images. In this case, the Illustrator file is placed in InDesign, so even though InDesign can create tagged PDFs, the tagging doesn't work for placed Illustrator content. So it sounds like we either do the tagging from scratch in Acrobat, as you say, or we try to bring in the content directly into InDesign and tag it there.
If only Adobe wholeheartedly supported accessible documents so we could more easily use it to meet WCAG 2.0 Level AA standards which are mandatory for our organisation. We are looking at CommonLook software to make the process of creating accessible PDFs easier and quicker. It's just hard to believe the lack of support from Adobe on this. Acrobat doesn't even come close to checking against WCAG 2AA and the online help is very hit and miss and full of broken links. For such an expensive product it's very disappointing, so thank goodness for other companies who see this as an opportunity to provide a better service.

How Can I replace newScale Text Strings with Custom Values?

How Can I replace newScale Text Strings with Custom Values?
How can I replace newScale text strings with custom values?
All newScale text is customizable. Follow the procedure below to change the value of any text string that appears in RequestCenter online pages.
Procedure
1. Find out the String ID of the text string you would like to overwrite by turning on the String ID display:
a) Navigate to the RequestCenter.ear/config directory.
b) Open the newscale.properties file and add the following name-value pair at the end of the file:res.format=2
c) Save the file.
d) Repeat steps b and c for the RmiConfig.prop and RequestCenter.prop files.
e) Stop and restart the RequestCenter service.
f) Log in to RequestCenter and browse to the page that has the text you want to overwrite. In front of the text you will now see the String ID.
g) Note down the String ID's you want to change.
2. Navigate to the directory: /RequestCenter.ear/RequestCenter.war/WEB-INF/classes/com/newscale/bfw.
3. Create the following sub-directory: res/resources
4. Create the following empty text files in the directory you just created:
RequestCenter_0.properties
RequestCenter_1.properties
RequestCenter_2.properties
RequestCenter_3.properties
RequestCenter_4.properties
RequestCenter_5.properties
RequestCenter_6.properties
RequestCenter_7.properties
5. Add the custom text strings to the appropriate RequestCenter_<Number>.properties file in the following manner (name-value pair) StringID=YourCustomTextString
Example: The StringID for "Available Work" in ServiceManager is 699.
If you wanted to change "Available Work" to "General Inbox", you would add the following line to the RequestCenter_0.properties file
699=General Inbox
Strings are divided into the following files, based on their numeric ID:
Strings are divided into the following files, based on their numeric ID:
String ID File Name
0 to 999 -> RequestCenter_0.properties
1000 to 1999 -> RequestCenter_1.properties
2000 to 2999 -> RequestCenter_2.properties
3000 to 3999 -> RequestCenter_3.properties
4000 to 4999 -> RequestCenter_4.properties
5000 to 5999 -> RequestCenter_5.properties
6000 to 6999 -> RequestCenter_6.properties
7000 to 7999 -> RequestCenter_7.properties
6. Turn off the String ID display by removing (or commenting out) the line "res.format=2" from the newscale.properties, RequestCenter.prop and RmiConfig.prop files
7. Restart RequestCenter.
Your customized text should be displayed.

I've recently come across this information and it was very helpful in changing some of the inline text.
However, one place that seemed out of reach with this method was the three main buttons on an "Order" page. Specifically the "Add & Review Order" button was confusing some of our users.
Through the use of JavaScript we were able to modify the label of this button. We placed JS in the footer.html file that changes the value of the butt

How can I print a text message conversation from my iPhone? Not using screenshots.

How can I print a text message conversation from my iPhone? Not using screenshots. It's around 500 messages so screenshots is not a option.

Yes, you can delete from iphone:
http://manuals.info.apple.com/enUS/iPhone_iOS4_UserGuide.pdf
It is covered in the manual.
Page 172:
"Delete a podcast: In the Podcasts list in iPod, swipe left or right over the podcast, then
tap Delete. "

How can i pass formatted text to PDF format

Similar Messages

Maybe you are looking for