How can I print from my ipad2 to my hp6210 all in one using printopia...I can see the list on my ipad2, I select the printer and say print but nothing happens.
How can I print from my ipad2 to my hp 6210 all in one using printopia? I see my printer on my iPad, I select it and say print and nothing happens. The printer is connected to an older Mac with OS X 10.4.11 but I do have an imac in another room. I have trouble printing from the iMac to this printer also even tho share is on but the printer works fine with the old Mac it's connected to. My iPad has the latest iOS.
A few things to consider.
The computer Printopia is loaded on must be powered on and must be able to print on the printer that is being shared. If the iMac is having problems printing to the printer it could indicate a problem with the share setup.
Similar Messages
-
I can't reach recovery system when I reboot- I press 'command' and 'r' quickly, but nothing happens, the progress bar begins to load... Any thoughts? It gets about halfway through loading and then stops, no mouse, no nothing. I think I'll be able to move past it if I can reach the Recovery options.
Thanks!If you are really sure that it's impossible to click in Recovery mode, then something is wrong with the machine.
Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.
Back up all data on the internal drive(s) before you hand over your computer to anyone. There are ways to back up a computer that isn't fully functional — ask if you need guidance.
If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to an empty drive from any of them.) Don’t erase the recovery partition, if present.
Keeping your confidential data secure during hardware repair
Apple also recommends that you deauthorize a device in the iTunes Store before having it serviced.
*An SSD doesn't need to be zeroed. -
Got my ipad mini. It works perfectly fine until I updated to ios 6.0.2. Now I can't connect to wifi. I've tried every solutions offered in every forums and internet sites but nothing happened. Still ipad cannot connect to wifi. HELP!!!
Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
• Launch Settings app
• Tap on Wi-Fi
• Tap on the blue arrow of the Wi-Fi network that you connect to from the list
• In the window that opens, tap on the Renew Lease button
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
The game "horn" does'nt open and shows installing but nothing happens. it was transferred from the computer to the ipad. help!, The game horn does'nt open and shows installing but nothing happens. it was transferred from the computer to the ipad. help!
Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430
iOS 7: Help with how to fix a crashing app on iPhone, iPad (Mini), and iPod Touch
http://teachmeios.com/help-with-how-to-fix-a-crashing-app-on-iphone-ipad-mini-an d-ipod-touch/
Troubleshooting apps purchased from the App Store
http://support.apple.com/kb/TS1702
Delete the app and redownload.
Downloading Past Purchases from the iTunes Store, App Store and iBooks Store
http://support.apple.com/kb/ht2519
Cheers, Tom -
my i tunes software can not detect my i pod, I check the cable, I close my i pod and I relight, but nothing happens.
What should I do?Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
Hello I am trying to download the latest itunes and it keeps asking me to restart the mac and I do but nothing happens. Can someone help? Thankyou
Hi Chris, I know where to check for updates but after I agree to terms conditions etc it asks to restart the computer before it can start downloading. I do that and it keeps repeating the process?
-
if you can help me please alguin
Adobe Creative Cloud because I do not get After Effects among others but I try to install software from the page but I give After Effects download shareware and says downloading but nothing comes give him retrying but nothing even leave the application of Adobe Creative but nothing helpWithout proper system info and otehr technical details nobody can tell you anything.
Mylenium -
I have a few problems...
I wanted to make a partition to install windows, I tried to use bootcamp 5 where it wanted to partition and install windows at the same time. I do not have a cd of windows but instead had it on a flash drive. Bootcamp couldn't find it. Instead I was reading forums and found that there was another way to install windows by partioning your harddrive using the disk utility, downloading the bootcamp drivers, and installing rEFIt (an app that when starting the compouter a menu would come up to boot windows from the flashdrive). I try that and the windows install screen gets me to the point where I pick a partition. I attempt to pick the partitioned drive but a message comes up telling me that "this is of the GPT partition style" and windows cannot be installed on the drive.
So now I went back to disk utility and deleted the partition but there is still blank space. I wanted to retry and install windows through bootcamp (somehow) but a message comes up that there cannot be any partitions or that a partition must be created using bootcamp. SO i keep trying to drag the partition over the blank space and hit apply but nothing happens.
By the way I was trying to install windows 8 pro, some forums would say that you cant install win8 however I found others that said you could. How do I fix my partition and how do I use bootcamp to install windows (preferrably 8)?Csound1 What Ive been trying to explain is that I have been running bootcamp, I open the app where the first screen is the introduction, i hit continue, the first time I select "download the latest windows support software fromm Apple" then I return and instead select "Install Windows 7." Then hit continue. The third screen is where I "Create a Partition for Windows" I set Windows to 80 gigs then hit INSTALL. As stated before Bootcamp cannot find the install drivers saying "The installer disc could not be found." My windows software is on a USB drive not a disc, I tried using a virtual disc reader to make it appear that the windows software was running on a disc, still no luck. What I would like to know is how to install windows on bootcamp.
-
Need camera raw plugin 8.5 to switch between Lightroom and PS CC. Tried to update CC. It say installing but nothing happens.
You may need to do a manual install:
http://helpx.adobe.com/x-productkb/multi/camera-raw-applictions-cannot-updated.html -
I have OS X 10.7.5 and am trying to download mavericks v 10.9.1 but nothing happens. I log in and download shows but nothing happens when I click it. Any help? Ta
Its a 5.3 GB file. It might takle a while to download.
When done, it may open automatically, but the file will be in your apps folder
Grant -
I go to file and click transfer but nothing happens. I am trying to update my iphone but it says you need to transfer purchase apps. So i am now stuck. i need help!!!
Click here, follow the instructions, and choose Transfer Purchases in the File menu.
(79456) -
I have problem opening this file. It just take hours and hours incircle but nothing happen. Please help ! I would like this app to be reinstall
What file? Does this involve iPhoto somehow?
-
I am trying to finish downloading a free app.
I already agrred to the terms.
the next says Download Now but nothing happens when I press the OK buttonHi helpcmo,
Thanks for visiting Apple Support Communities.
If your free app isn't downloading, first try restarting the iPhone:
iOS: Turning off and on (restarting) and resetting
http://support.apple.com/kb/ht1430
Next, you may want to verify whether the issue is due to the iTunes Store connection:
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
If the behavior persists, try the remaining steps in our iPhone assistant:
http://www.apple.com/support/iphone/assistant/phone/
All the best,
Jeremy -
My nano has boxes around its icons, even the around the time. When I tap into my Songs or Now Playing, I can't get out because I can't slide either to the left or to the right. It appeared after I transferred some songs from my iPod to iTunes. I've tried resetting and restoring it but nothing seems to work. HELP.
And the voice over's activated and it tells me to double tap things to select them.
-
I am trying to connect a WD Mybook for Mac to my airport/time machine device. On the AirPort Utility it listed under Disks at 0 Mb. I enabled file sharing. And also followed all the steps - "secured disk access: with a disk passord", "Airport disk guest access: read and write", "Share disks over WAN". But nothing happens. If I plug it directly into my MacBook it works fine. How do I fix it? Also, its connected via a powered usb hub.
I assume that you are using Mac operating system 10.4.11, as your profile indicates.
The instructions that you referenced are for use with AirPort Utility....not AirPort Admin Utility.
Suggest that you download and install AirPort Utility 5.4.2 for Mac , which will run on 10.4.11.
Also noticed that the instructions do not tell you that the hard drive should be formatted in Mac OS Extended (Journaled) to work with the AirPort Extreme, but they should.
Maybe you are looking for
-
I've been trying to update my iPad and its giving me an error window about having an invalid signatures
-
Cannot hear imported wav files in the output
Hi, I am using Macromedia Captivate. Version 1.01.1447 I have imported a wav file and when I am playing the slide containing the audio file everything is fine, in particular I hear my audio file. However, when going to the preview of the entire slide
-
Unable to create a webi report and 3 times it prompting for logon credentai
Hi, We have a issue, 1.We are unable to create a webi report and 3 times it is prompting for logon credentials. 3.After giving the logon credentials 3 times then it is working fine. 4.We are using IIS Jakarta redirector . 5.We are able to view the
-
Need to restrict view of DIRs assigned to material, vendor, and customer
Hello, SAP standard, version ECC 6.0. Different plants in use with requirement for differnt authorizations. I know that DIRs can be assigned to material master. However, the problem is that it's client level data. Now there is a need to implement DMS
-
HttpsURLConnection class cast exception problem
Hy everyone, I have next java code to send xml file over https. // Create a trust manager that does not validate certificate chains TrustManager[] trustAllCerts = new TrustManager[] { new X509TrustManager() {