How can I programmatically hide a column in OAHGridBean

Dear all,
I face a problem while I need to hide a column for an OAHgridbean in runtime. Could anyone please help?
Thanks,
Desmond

Do you have solution for this?
Please share it ..It is urgent..
thanks
Pradeep

Similar Messages

  • How can I programmatically change a label?

    Hi everyone,
    I have a 2-D array that I wish to populate with different sorts of data.  Depending upon the data, the names of the rows and columns may change.  Arrays have to have identical labels and I suppose I could simply populate a string indicator, but frankly, that looks like trash.
    How can I programmatically change a label of a column or a row in a 2-D array?  Should I consider using a table?  I want it to look nice.
    Thanks,
    Jason

    Hi
    I do not think you are able to change the label programatically.
    But you might consider to use Captions instead of labels. You can hide labels and make captions visible programatically, and you can change the text of the caption and size (see enclosed vi).
    take care
    Pawel
    Attachments:
    caption.vi ‏20 KB

  • How can I display all the columns on the screen without scrolling from side to side?

    My clinic software has many columns. How can I display all the columns without having to scroll from left to right all the time?

    If the software you are using doesn't offer the ability to increase or decrease document size, as many do, then the only way is to increase your screen resolution. If that's not possible, maybe you can decrease your font size?  If you can't do any of these, I think you're out of luck!

  • How can I remove the Location column from the search results in a .chm file?

    How can I remove the Location column from the search results in a .chm file?
    I generated the file in Robohelp HTML 9.
    As far as I know it's used when you've combined more than one source into the final help file. It is possible (though I don't remember doing it) that I did that once a couple of years ago but now I'm only using one source - the project that's generating the .chm.
    Can anyone tell me how I can remove it?
    Thanks
    Tom

    In Project Setup look at the Window properties. I think you will find Advanced Search is ticked.
    See www.grainge.org for RoboHelp and Authoring tips
    @petergrainge

  • How can I add a new column in compress partition table.

    I have a compress partition table when I add a new column in that table it give me an error "ORA-22856: CANNOT ADD COLUMNS TO OBJECT TABLES". I had cretaed a table in this clause. How can I add a new column in compress partition table.
    CREATE TABLE Employee
    Empno Number,
    Tr_Date Date
    COMPRESS PARTITION BY RANGE (Tr_Date)
    PARTITION FIRST Values LESS THAN (To_Date('01-JUL-2006','DD-MON-YYYY')),
    PARTITION JUNK Values LESS THAN (MAXVALUE));
    Note :
    When I create table with this clause it will allow me to add a column.
    CREATE TABLE Employee
    Empno Number,
    Tr_Date Date
    PARTITION BY RANGE (Tr_Date)
    PARTITION FIRST Values LESS THAN (To_Date('01-JUL-2006','DD-MON-YYYY')),
    PARTITION JUNK Values LESS THAN (MAXVALUE));
    But for this I have to drop and recreate the table and I dont want this becaue my table is in online state i cannot take a risk. Please give me best solution.

    Hi Fahed,
    I guess, you are using Oracle 9i Database Release 9.2.0.2 and the Table which you need to alter is in OLTP environment where data is usually inserted using regular inserts. As a result, these tables generally do not get much benefit from using table compression. Table compression works best on read-only tables that are loaded once but read many times. Tables used in data warehousing applications, for example, are great candidates for table compression.
    Reference : http://www.oracle.com/technology/oramag/oracle/04-mar/o24tech_data.html
    Topic : When to Use Table Compression
    Bug
    Reference : http://dba.ipbhost.com/lofiversion/index.php/t147.html
    BUG:<2421054>
    Affects: RDBMS (9-A0)
    NB: FIXED
    Abstract: ENH: Allow ALTER TABLE to ADD/DROP columns for tables using COMPRESS feature
    Details:
    This is an enhancement to allow "ALTER TABLE" to ADD/DROP
    columns for tables using the COMPRESS feature.
    In 9i errors are reported for ADD/DROP but the text may
    be misleading:
    eg:
    ADD column fails with "ORA-22856: cannot add columns to object tables"
    DROP column fails with "ORA-12996: cannot drop system-generated virtual column"
    Note that a table which was previously marked as compress which has
    now been altered to NOCOMPRESS also signals such errors as the
    underlying table could still contain COMPRESS format datablocks.
    As of 10i ADD/SET UNUSED is allowed provided the ADD has no default value.
    Best Regards,
    Muhammad Waseem Haroon
    [email protected]

  • How can I add a new column to Grid view under Tests tab

    I understand in "ORACLE Test manager for web Applications", the Grid view under Tests tab should be customised.
    How can I add a new column to Grid view under Tests tab? Thanks Katherine

    I don't think this is possible.
    Regards,
    Jamie

  • How can I add a new column to an Attachments Table

    How can I add a new column to an Attachments Table??
    And I want to remove the usage column also!
    Thanks!

    I tried to remove the usage column doing this:
    OAAttachmentTableBean attachTable = (OAAttachmentTableBean)webBean.findChildRecursive("attachTable");
    if (attachTable != null)
    attachTable.findChildRecursive("UsageTypeColumn").setRendered(false);
    but I'm getting null pointer exception on "UsageTypeColumn"...
    :(

  • How can i select the next column instead of next row when press enter key

    I need to know how can i select the next column instead of next row when i press the enter key.By default ,when i press enter key the next row is selected and the column remain unchanged but I wants opposite that is the row should remain unchanged but column index will changed.
    Thanks to all.

    Well, the right arrow key will already move you to the next column, so the easiest way to do this is to modify the InputMap to have the Enter key invoke the same Action as the right arrow key.
    You can search the forum for my "Table Actions" (without the space) example that will show you how to do this.

  • How can I preserve row and column addresses on multiple cells at once in Numbers?

    How can I preserve row and column addresses on multiple cells at once in Numbers 3.2.2? I do a lot of rearranging and sorting and want to reference cells in other sheets. After entering the formulas (example: '=Sheet1::Table 1::H126') I will sort the table and the formulas will not move with the sort.  I think I can fix this by going cell by cell checking the 'preserve row' and 'preserve column' boxes when editing the formula.  I want to avoid having to go one by one.  I know that checking the boxes creates a formula like this: '=Sheet1::Table 1::$H$126'  I have also tried entering this manually and filling down but it doesn't include the preservations (the $$) in the autofill.  If there is another way to remedy my sorting problem that would also be welcomed!
    THANKS!!

    The title of the post is this
    How can I preserve row and column addresses on multiple cells at once in Numbers?
    I restated the Question as follows
    Can "Preserve Row" an / or "Preserve Column" be set on multiple cells at the same time.
    In both cases it is not asked if multiple cells can be set to....
    That is a given.
    Step back a second...  It is like selecting multiple cells and setting the text color of the currently selected cells to red. This can be done. More than one cell at a time modified because they are currently selected.
    Whats is being asked is:  if more than one cell is selected at the same time can the settings "Preserve Row" an / or "Preserve Column" be applied. No table I put up will help with that question.
    YES or NO
    If YES how?

  • How can i delete One Blank Column in my report

    Hi guru's,
    can any one tell me .........
    i'm getting one Blank column in Query output.How can i delete that Blank Column ?
    in the same way Row  Also....
    Thanking  u advancely
    Chandra

    Here is a site with some nice sample code on deleting rows / columns : [http://www.java2s.com/Code/JavaScript/HTML/ModifyingTableColumns.htm|http://www.java2s.com/Code/JavaScript/HTML/ModifyingTableColumns.htm]
    As to where to put the code, edit your web template, then put the code in there. There are script web items that you can use, but be aware that editing javascript in the script item is not too pleasant. I have found the best approach is to rather create the javascript file on my machine, then upload it to the MIME repository, then reference that in the web template.
    Here is how I have referenced the javascript file sitting in our MIME repository:
    < script src="bwmimerep:///sap/bw/mime/Customer/javascript/CustomCalculations.js" />
    I hope this helps you out.
    Cheers,
    Andrew
    Edited by: Andrew Lewis on Jul 18, 2008 9:26 AM

  • How can you modify the displayed columns on a Related Information List?

    How can you modify the displayed columns on a Related Information List? For example, how could you add the "Type" column to the List of columns displayed for Service Requests when you are viewing the Contacts Detail page?
    Thanks

    I'd have to say I think this is one of the biggest flaws in the OnDemand system currently. The solution I have come up with is to create reports and put them in webapplets showing the data I want to show. I have then removed the standard Related Info List Objects and added weblinks to create new records as the button on the List object is also gone.
    Keep in mind that doing this does slow things down a little, so it may not work if you have a big user base.
    RWB.

  • Webdynpro ABAP - ALV how can i display Total of Column

    Hi friends,
    Webdynpro ABAP - ALV how can i display Total of Columns.
    Please tell me any metod is there or any solution.
    Thanks,
    Kumar.

    Hi
    You can take help of following code snippet to create totals for a particular column
    Data: lr_function_settings TYPE REF TO CL_SALV_WD_CONFIG_TABLE.
      DATA: lr_column_settings TYPE REF TO if_salv_wd_column_settings,
            lr_column          TYPE REF TO cl_salv_wd_column,
            lt_column type salv_wd_t_column_ref,
            ls_column type salv_wd_s_column_ref.
    Data:  lr_field_amnt type REF TO CL_SALV_WD_FIELD.
    * get reference of ALV component
      lr_salv_wd_table = wd_this->wd_cpifc_OVERVIEW_EARNED_ALV( ).
      wd_this->alv_config_table = lr_salv_wd_table->get_model( ).
    *  get function settings
      lr_function_settings ?= wd_this->alv_config_table.
    * display columns in correct order
      lr_column_settings ?= wd_this->alv_config_table.
      lt_column = lr_column_settings->get_columns( ).
      loop at lt_column into ls_column.
    CASE ls_column-id.
    when 'AMOUNT'
    * aggregate field
            CALL METHOD LR_FUNCTION_SETTINGS->IF_SALV_WD_FIELD_SETTINGS~GET_FIELD
              EXPORTING
                FIELDNAME = 'AMOUNT'
              RECEIVING
                VALUE     = lr_field_amnt.
    * create aggregate rule as total
            CALL METHOD LR_FIELD_AMNT->IF_SALV_WD_AGGR~CREATE_AGGR_RULE
              EXPORTING
                AGGREGATION_TYPE = IF_SALV_WD_C_AGGREGATION=>AGGRTYPE_TOTAL
              RECEIVING
                VALUE            = lv_aggr_rule.
    endcase.
    Regards
    Manas DUa

  • How can I add new row/column into existing jTable?

    Hi add!
    Can you help me how can I add new row/column into existing jTable?
    Tnx in adv!

    e.g
    Create two buttons inside the Table ( "Add New Row" ) and ("Add new Column")
    their handlers are:
    add new row:
    //i supose u already have
    DefaultTabelModel tablemodel = new DefaultTableModel(rowdata, columnNames);
    //and   
       JTabel jtable = new JTable(tablemodel);
    // Handler (row)
    jbtAddRow.addActionListener(new ActionListener(){
       public void actionPerformed(ActionEvent e) {
          if(jtable.getSelectedRow() >= 0 )
              tablemodel.insertRow(jtable.getSelectedRow(), new java.util.Vector());  
           else  
                tablemodel.addRow(new java.util.Vector());
        });to add new columns its the same but inside actionPerformed method:
    ask for e.g "Whats the name for the new column"
    then,
       tablemodel.addColumn(nameOfColumn, new java.util.Vector());   Joao
    Message was edited by:
    Java__Estudante

  • How can i programmatically add a text in a combobox drop down menu ?

    How can i programmatically add a text in a combobox drop down menu ? Can it be possible using any property node?

    You've posted to the wrong forum. Please post to the LabVIEW board.

  • How can I programmatically clear a chart?

    Hi,
    Could you please let me know how can I programmatically clear a chart? I would like to run a code multiple times and everytime I run it , the chart should be cleared . I tried to find a History property node but seems like there is no such properfy node for chart

    If I have conceived your problem clearly, there is of course history data property node for charts. You may get one by right clicking on chart 
    create>>Property node>>History data(which is last on list)  
    CLAD
    Passionate for LabVIEW

Maybe you are looking for