How can I pull the BUKRS (company code) value, for a X_USER (sy-uname) inpu

HI Experts,
Pls. clarify that, How can I pull the BUKRS (company code) value, for a X_USER (sy-uname) as input?
ThanQ.

Check with USRM1 Table
give user name (Uname ) and you get company code (BUKRS)
also check with other tables : USRM* in SE11
Thanks
Seshu

Similar Messages

How can i pull the

Hi folks
iam developing report for following requirement.
want to disply the vendor transaction file for all company codes Fiscal year,of 2004,2005,2006, and 2007 (to date).
The purpose of oureport is to analyze our company invoices and investigate potential overpayment opportunities. In order to effectively accomplish this, we need a single invoice record for each invoice that was received by compnay from their vendors. The single invoice record would contain at least the following columns: Vendor Number, Vendor Invoice Number, Invoice Date, Invoice Amount, SAP Document Number, Check/Wire Number, Check/Wire Date, Check/Wire Amount. SAP would have multiple rows in a table for any one invoice, whereas we would only want to see ONE row for every vendor invoice.
if you know that company pays (for example) 75,000 invoices/year - then the transaction file you would have about 300,000 records in it. 75,000 Invoices * 4 years.
inodrer to develop this report iam using table PAYR -payee
BSIK ( closed items) BSAK ( open items).
my question is any one tell me how can i pull the payment transactions for each invoice?
regards
neeru

try to use function module GET_CHECK_INFORMATION
hope that helps
Andreas

How can I decode the phone company closed on the At

How can I decode the phone company closed on the At

If you're asking how to get a carrier locked phone unlocked, contact the carrier it's locked to and find out what their policy is.
If that's not what you meant, then post in your native language, because you're not making sense.

How can i request the actual time code of digital video recorder, i am using RS232 interface for asking actual time code of digital video recording

how can i request the actual time code of digital video recorder, i am using RS232 interface for asking actual time code of digital video recording

If you have an RS-232 interface to the digital video recorder, it may be that you can send a command to the video recorder in order to get the time code sent back to your application - you would then read this as a string and then incorporate this data into your program.
The best source of help will be any documentation you have relating to the serial (RS-232) interface with the digital video recorder. This documentation should have commands that you can send to the recorder and expected response strings that you should get back from the device. This task should be straightforward but can often be frustrating without documentation about the video recorder. This will not be something that you can "guess" - past experience in writing serial communication ap
plications has shown that a good manual is your best friend.
Failing this if you have any source code for example programs that have already been written to communicate with the recorder, you might be able to extract the relevant ASCII strings and use them within your application. This is true whether you are using LabVIEW or a text-based language.
Jeremy

How can I download the full source code for the Java 3D package

how can I download the full source code for javax.media.j3d
especially I need the Transform3D.java class.
thanks a lot
Meir

thank you guys I'll try to do so, I suggest you to
join me.From the one of the (ex-!)Java3D team:
"I'm glad to see that Sun has decided to officially support an
open source Java/OpenGL binding, JOGL. Perhaps they will
eventually decide to make Java 3D open source. However, be
careful what you wish for. The Java 3D source is huge and
complex. There are native sections for Solaris, Windows/OpenGL,
and Windows/Direct3D, plus common code. I don't know how you'd
open source a build process that requires different pieces of
the code be built on different machines running different
operating systems."
Sounds scary - I hope we're ready for it :)

How can I get the XSLT source code?

How can I get the XSLT source code?

Actually, I want to parse customer reviews for academic purpose.
I'm trying to follow the links in the customer reviews zone.
For example:
In the following page
http://www.amazon.com/gp/product/customer-reviews/B000LU8A7E/sr=1-1/qid=1180473311/ref=cm_cr_dp_all_helpful/102-2890495-8864146?ie=UTF8&n=1065836&qid=1180473311&sr=1-1#customerReviews
in the "customer reviews" section, there is a link "next" that gets the next 10 reviews.
The thing is that I don't know how to imitate its action using java and actually, I'm not sure if it is possible to do that using software.
I tried to look at the source code that I got using the previous java code I posted and I see that the next link always has the following href attributes "http://www.amazon.com/gp/product/customer-reviews/B000LU8A7E"
I tried to see if there is any javascript that tells the page which 10 reviews to get but with no success.
So if anyone knows how to imitate the next link action using software that will sure help me a lot.
Thanks in advance

How can we find the list of user exits for a transaction

hi all
iam new in user exits please send the basic details
how can we find the list of user exit for a perticular transaction and how can we determine that a particulr user exit is used for a field
regards
jagadish

hi,
check the below links for userexits
http://help.sap.com/saphelp_46c/helpdata/en/64/72369adc56d11195100060b03c6b76/frameset.htm
FAQ's
http://http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.ficoexpertonline.com/downloads/User%20ExitsWPedit.doc
http://www.easymarketplace.de/userexit.php
http://wiki.ittoolbox.com/index.php/HOWTO:Implement_a_screen_exit_to_a_standard_SAP_transaction
1. what is the defference between enhancement and user-exits?
http://www.sap-img.com/abap/difference-between-badi-and-user-exits.htm
Re: difference between user exits & customer exits
Some Questions ! Plz help...
http://searchsap.techtarget.com/expert/KnowledgebaseAnswer/0,289625,sid21_gci1190924_tax299358,00.html?bucket=ETA
2. Difference between CMOD and SMOD?
http://www.sap-img.com/abap/what-is-the-difference-between-smod-and-cmod.htm
http://www.sap-img.com/abap.htm
http://sap.ittoolbox.com/groups/technical-functional/sap-r3-dev/diff-between-cmod-and-smod-236095
http://sap.ittoolbox.com/groups/technical-functional/sap-r3-dev/diff-between-cmod-and-smod-236107
check these links..
http://www.sapgenie.com/abap/tips_and_tricks.htm
http://www.sap-img.com/abap/field-exits-smod-cmod-questions-and-answers.htm
http://www.sap-img.com/abap/what-is-user-exits.htm
passing selet-option variable to subrouine...
Finding the user-exits of a SAP transaction code
Finding the user-exits of a SAP transaction code
Enter the transaction code in which you are looking for the user-exit
and it will list you the list of user-exits in the transaction code.
Also a drill down is possible which will help you to branch to SMOD.
Written by : SAP Basis, ABAP Programming and Other IMG Stuff
             http://www.sap-img.com/*
report zuserexit no standard page heading.
tables : tstc, tadir, modsapt, modact, trdir, tfdir, enlfdir.
         tables : tstct.
data : jtab like tadir occurs 0 with header line.
data : field1(30).
data : v_devclass like tadir-devclass.
parameters : p_tcode like tstc-tcode obligatory.
select single * from tstc where tcode eq p_tcode.
if sy-subrc eq 0.
   select single * from tadir where pgmid = 'R3TR'
                    and object = 'PROG'
                    and obj_name = tstc-pgmna.
   move : tadir-devclass to v_devclass.
      if sy-subrc ne 0.
         select single * from trdir where name = tstc-pgmna.
         if trdir-subc eq 'F'.
            select single * from tfdir where pname = tstc-pgmna.
            select single * from enlfdir where funcname =
            tfdir-funcname.
            select single * from tadir where pgmid = 'R3TR'
                               and object = 'FUGR'
                               and obj_name eq enlfdir-area.
            move : tadir-devclass to v_devclass.
          endif.
       endif.
       select * from tadir into table jtab
                     where pgmid = 'R3TR'
                       and object = 'SMOD'
                       and devclass = v_devclass.
        select single * from tstct where sprsl eq sy-langu and
                                         tcode eq p_tcode.
        format color col_positive intensified off.
        write:/(19) 'Transaction Code - ',
             20(20) p_tcode,
             45(50) tstct-ttext.
                    skip.
        if not jtab[] is initial.
           write:/(95) sy-uline.
           format color col_heading intensified on.
           write:/1 sy-vline,
                  2 'Exit Name',
                 21 sy-vline ,
                 22 'Description',
                 95 sy-vline.
           write:/(95) sy-uline.
           loop at jtab.
              select single * from modsapt
                     where sprsl = sy-langu and
                            name = jtab-obj_name.
                   format color col_normal intensified off.
                   write:/1 sy-vline,
                          2 jtab-obj_name hotspot on,
                         21 sy-vline ,
                         22 modsapt-modtext,
                         95 sy-vline.
           endloop.
           write:/(95) sy-uline.
           describe table jtab.
           skip.
           format color col_total intensified on.
           write:/ 'No of Exits:' , sy-tfill.
        else.
           format color col_negative intensified on.
           write:/(95) 'No User Exit exists'.
        endif.
      else.
          format color col_negative intensified on.
          write:/(95) 'Transaction Code Does Not Exist'.
      endif.
at line-selection.
   get cursor field field1.
   check field1(4) eq 'JTAB'.
   set parameter id 'MON' field sy-lisel+1(10).
   call transaction 'SMOD' and skip first   screen.
*---End of Program
if u want to find the function exit
then check the below code
REPORT ZV_FIND_EXIT NO STANDARD PAGE HEADING.
TABLES : TSTC, TADIR, MODSAPT, MODACT, TRDIR, TFDIR, ENLFDIR.
TABLES : TSTCT.
DATA : JTAB LIKE TADIR OCCURS 0 WITH HEADER LINE.
DATA : FIELD1(30).
DATA : V_DEVCLASS LIKE TADIR-DEVCLASS.
PARAMETERS : P_TCODE LIKE TSTC-TCODE OBLIGATORY.
SELECT SINGLE * FROM TSTC WHERE TCODE EQ P_TCODE.
IF SY-SUBRC EQ 0.
SELECT SINGLE * FROM TADIR WHERE PGMID = 'R3TR'
AND OBJECT = 'PROG'
AND OBJ_NAME = TSTC-PGMNA.
MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
IF SY-SUBRC NE 0.
SELECT SINGLE * FROM TRDIR WHERE NAME = TSTC-PGMNA.
IF TRDIR-SUBC EQ 'F'.
SELECT SINGLE * FROM TFDIR WHERE PNAME = TSTC-PGMNA.
SELECT SINGLE * FROM ENLFDIR WHERE FUNCNAME =
TFDIR-FUNCNAME.
SELECT SINGLE * FROM TADIR WHERE PGMID = 'R3TR'
AND OBJECT = 'FUGR'
AND OBJ_NAME EQ ENLFDIR-AREA.
MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
ENDIF.
ENDIF.
SELECT * FROM TADIR INTO TABLE JTAB
WHERE PGMID = 'R3TR'
AND OBJECT = 'SMOD'
AND DEVCLASS = V_DEVCLASS.
SELECT SINGLE * FROM TSTCT WHERE SPRSL EQ SY-LANGU AND
TCODE EQ P_TCODE.
FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
WRITE:/(19) 'Transaction Code - ',
20(20) P_TCODE,
45(50) TSTCT-TTEXT.
SKIP.
IF NOT JTAB[] IS INITIAL.
WRITE:/(95) SY-ULINE.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
WRITE:/1 SY-VLINE,
2 'Exit Name',
21 SY-VLINE ,
22 'Description',
95 SY-VLINE.
WRITE:/(95) SY-ULINE.
LOOP AT JTAB.
SELECT SINGLE * FROM MODSAPT
WHERE SPRSL = SY-LANGU AND
NAME = JTAB-OBJ_NAME.
FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
WRITE:/1 SY-VLINE,
2 JTAB-OBJ_NAME HOTSPOT ON,
21 SY-VLINE ,
22 MODSAPT-MODTEXT,
95 SY-VLINE.
ENDLOOP.
WRITE:/(95) SY-ULINE.
DESCRIBE TABLE JTAB.
SKIP.
FORMAT COLOR COL_TOTAL INTENSIFIED ON.
WRITE:/ 'No of Exits:' , SY-TFILL.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(95) 'No User Exit exists'.
ENDIF.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(95) 'Transaction Code Does Not Exist'.
ENDIF.
AT LINE-SELECTION.
GET CURSOR FIELD FIELD1.
CHECK FIELD1(4) EQ 'JTAB'.
SET PARAMETER ID 'MON' FIELD SY-LISEL+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
or
1. in se11, goto table MODSAP
View table contents
2. in Type field, enter 'E' (for function exit)
3. For that tcode, u should know the program name.
eg. SAPLLMOB
4. then type SAPLLMOB and execute
or
REPORT z34331_user_exit .
TABLES : tstc, "SAP Transaction Codes
tadir, "Directory of Repository Objects
modsapt, "SAP Enhancements - Short Texts
modact, "Modifications
trdir, "System table TRDIR
tfdir, "Function Module
enlfdir, "Additional Attributes for Function Modules
tstct. "Transaction Code Texts
DATA : jtab LIKE tadir OCCURS 0 WITH HEADER LINE.
DATA : field1(30).
DATA : v_devclass LIKE tadir-devclass.
SELECTION-SCREEN BEGIN OF BLOCK a01 WITH FRAME TITLE text-001.
SELECTION-SCREEN SKIP.
PARAMETERS : p_tcode LIKE tstc-tcode OBLIGATORY.
SELECTION-SCREEN SKIP.
SELECTION-SCREEN END OF BLOCK a01.
START-OF-SELECTION.
Validate Transaction Code
SELECT SINGLE * FROM tstc
WHERE tcode EQ p_tcode.
Find Repository Objects for transaction code
IF sy-subrc EQ 0.
SELECT SINGLE * FROM tadir
WHERE pgmid = 'R3TR'
AND object = 'PROG'
AND obj_name = tstc-pgmna.
MOVE : tadir-devclass TO v_devclass.
IF sy-subrc NE 0.
SELECT SINGLE * FROM trdir
WHERE name = tstc-pgmna.
IF trdir-subc EQ 'F'.
SELECT SINGLE * FROM tfdir
WHERE pname = tstc-pgmna.
SELECT SINGLE * FROM enlfdir
WHERE funcname = tfdir-funcname.
SELECT SINGLE * FROM tadir
WHERE pgmid = 'R3TR'
AND object = 'FUGR'
AND obj_name = enlfdir-area.
MOVE : tadir-devclass TO v_devclass.
ENDIF.
ENDIF.
Find SAP Modifactions
SELECT * FROM tadir
INTO TABLE jtab
WHERE pgmid = 'R3TR'
AND object = 'SMOD'
AND devclass = v_devclass.
SELECT SINGLE * FROM tstct
WHERE sprsl EQ sy-langu
AND tcode EQ p_tcode.
FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
WRITE:/(19) 'Transaction Code - ',
20(20) p_tcode,
45(50) tstct-ttext.
SKIP.
IF NOT jtab[] IS INITIAL.
WRITE:/(95) sy-uline.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
WRITE:/1 sy-vline,
2 'Exit Name',
21 sy-vline ,
22 'Description',
95 sy-vline.
WRITE:/(95) sy-uline.
LOOP AT jtab.
SELECT SINGLE * FROM modsapt
WHERE sprsl = sy-langu AND
name = jtab-obj_name.
FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
WRITE:/1 sy-vline,
2 jtab-obj_name HOTSPOT ON,
21 sy-vline ,
22 modsapt-modtext,
95 sy-vline.
ENDLOOP.
WRITE:/(95) sy-uline.
DESCRIBE TABLE jtab.
SKIP.
FORMAT COLOR COL_TOTAL INTENSIFIED ON.
WRITE:/ 'No of Exits:' , sy-tfill.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(95) 'No User Exit exists'.
ENDIF.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(95) 'Transaction Code Does Not Exist'.
ENDIF.
Take the user to SMOD for the Exit that was selected.
AT LINE-SELECTION.
GET CURSOR FIELD field1.
CHECK field1(4) EQ 'JTAB'.
SET PARAMETER ID 'MON' FIELD sy-lisel+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
Regards,
Naveen

How can I fetch the element's attribute value by AS in a mxml file?

Sample code:
<mx:MenuBar id="myMenuBar" labelField="@label"
width="100%">
<mx:XMLList>
<menuitem label="MenuItem A">
<menuitem label="SubMenuItem A-1" enabled="false"/>
<menuitem label="SubMenuItem A-2"/>
</menuitem>
</mx:XMLList>
</mx:MenuBar>
How can I fetch the myMenuBar's width value by AS in a mxml
file. I can't find any API about it!

quote:
Originally posted by:
atta707
myMenuBar.width
assuming your AS file/class has access to this component
under the same id, myMenuBar.
Yes,you are right. Width is a existed property in myMenuBar
object in AS. I ignore this case.
But now, I want to fectch attribute "label"'s value in
<menuitem label="MenuItem A">.
How can I get attribute "label"'s value if "label" is
additional attribute for the element.

How can you use the same e-mail address for multiple ipads?

I have two iPads.. an iPad and an ipad 2. I registared my new ipad 2 and now my old ipad is will not let me log on and is telling me that my e-mail address is already in use. how can you use the same e-mail address for multiple ipads?

And by using the same Apple ID you can also share purchases. If you have a different Apple ID for each iPhone then you can't share purchases.

How can I download the trial version of indesign for mac?

how can I download the trial version of indesign for mac

Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 12 | 11, 10 | 9, 8, 7
Photoshop Elements: 12 | 11, 10 | 9,8,7
Lightroom: 5.5 (win), 5.5 (mac) | 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

How can i remove the bar (where i search for websites) when i full screen for my macbook pro

how can i remove the bar (where i search for websites) when i full screen

ohhh k i got it but thats not what i am looking for, so when i full screen i want it to be like fully full screen like when i watch a movie i want nothing but the movie on the screen and when i bring the mouse up then the tab shows again thats what exactly I'm asking about.

How can I get the CODEC DVCPRO HD 100 for Premiere CS5?

how can I get the CODEC DVCPRO HD 100 for Premiere CS5?

I did...not good luck so far, any suggestions?
¡Mucha Luz!
Tao Mijares
CEO
Mucha Luz! Productions LLC
310 994 7154
Sent from my Samsung G5 4G LTE smartphone

How can i get the 6.1.3 ipsw for iphone 4 sprint (cdma)

how can i get the 6.1.3 ipsw for iphone 4 sprint (cdma)

The ONLY legit way to update is to do so through itunes.

How can I set the maximum number of restarts for my PDF files?

I want sent my PDF to a friend,but I just allow him see it only twice.
How can I set the maximum number of restarts for my PDF files?
My software edition is Acrobat X

In the old days when PDFs were only opened on desktops and only in Acrobat or Reader, scripting could fake security features and people were generally convinced. As there are so many ways to open a PDF without scripts ever being run (from mobile devices to in-browser display, or simply opening the file in Illustrator), none of that works anymore.

How can I set the number of batch process for DTP globally?

Hi guys,
How can I set the number of batch process for DTP in system globally?
For eg. set the number to 1
Any hint is appriciated!
Regards,
Liying

Hi,
In DTP screen also you can view batch settings. Check the Settings menu, you will find Batch.
Reg
Pra

How can I pull the BUKRS (company code) value, for a X_USER (sy-uname) inpu

Similar Messages

Maybe you are looking for