How can I save a value in PO cache?

Hi to everyone, My problem is:
I have an integration SOAP to SOAP on PO 7.4, the first step is obtain a TOKEN, then I want to save this token in cache or PO database, beacuse later I'll can use this token in other operation from other integration. So I need verify first if a TOKEN exists and if is the case use this TOKEN.
Any idea?
thanks a lot.

Hi Carlos,
Global variable can be use across mapping but only in one scenario. In your case you need to create BPM
refer the below blog
Sharing data between message mapping in PI 7.1

Similar Messages

How can i save the values of output waveform in array ?

hi
how can i save the values of output waveform in array ?

how can i save the values of output waveform in array ?
the program is attachment bellow
Attachments:
closed loop transfer fn+fuzzy.vi ‏28 KB

Re:How can we save the values in drafts

Hi all,
I am using jdev 11.1.2.3.0
My requirement is I have one table as jobsheet.In jobsheet table some fields are mandatory.In this jspx page I have 2 buttons as save and draft.if i entered some data without entering mandatory fields and click the draft button it will saved in draft.if i modified the draft data and then clicks save it will save into the database.so how can i implement the logic.can anyone help me please.
Thanks,
G.Shilpa

This is not that easy.
First you have to think about where to save the data when the user clicks on draft. Then you have to think about how the data is saved. Finally you have to find out how to get to the data.
If you have constraints on your DB (which I recommend), that you can't store the data in the table you later want to store the real data as the constraints will not allow this. As we are talking about a multi user environment you have to store multiple sets of data which you need to assign the user who stores the data.
You can add another table to the db which look the same as the real one but does not have constraints like mandatory applied to it. When the user hits draft you store the data in this table. For the UI you then have to look into the too tables to find out if the user has saved a draft and read it from there if yes.
Timo

How can I save visited internet pages in cache for off-line reading?

Hi,
is there any way to save visited internet pages in cache for off-line reading until I delete them manually or cache is filled completely?
Thanks,
Wilfried

Hello
you can use this Add-on : https://addons.mozilla.org/en-US/mobile/addon/reading-list
Enjoy brorowsing!

How can I save the value of a variable in a database?

Do I need to save the number of times that I click in the animation to know how many times it has been seen
I go to the databases msql through php, javascript, ajax and jquery, but I don't know how to save the variable that contes the clicks from adobe edge animate
I appreciate your help about how I can go to the database from adobe edge animate, Thank you very much.
Luis Felipe Garcia
[email protected]

Can you clarify something? You want to know how many times someone has clicked a particular animation. Are you wanting to store the click as soon as they click it? So for example:
User sees animation.
They click to continue and go to some other page.
You want to know how many times they've done that.
Is that what you mean?

How can i save the output array of the invoke node "commands values" into a specific file

I must save the setup of vi commands'. I use an invoke node called "command value" wich give me an array with the name of the specific command and his value. How can i save this array into a specific file to load it later if o need. Must i change the array format?
Thank you

Hi,
I have attached two VIs.
The first one "Ecriture fichier tableau" (writer) permits to collect all control's values in an array (dbl) and to save it as .bin file. You had to convert variant type into dbl type. (You can do the same with string type if you wish. You will save datas as .txt file for example)
The second VI "Lecture tableau fichier" (reader) permits to retrieve all the datas you saved in the file.
I think this responds to your question.
Regards,
Attachments:
Control values.zip ‏26 KB

How can I pass the value to another frame?

Hi all,
The following is part of my coding of a frame. Once i click on the jButton2, the selected value will be stored into a variable named NAME and the value will be displayed by a label in same frame. At the same time, a new frame named TESTING3 will be set to visible.
private void jButton2ActionPerformed(java.awt.event.ActionEvent evt)
// TODO add your handling code here:
    String name = (String)jList1.getSelectedValue();
    jLabel1.setText(name);       //display the value in a label in same frame
    new testing3().setVisible(true);     //a new frame set to visible
}      Question: How can I pass the value to TESTING3 frame and display it on that frame?
Thanks,
ning.

just make an archive that save that variable and them get them from de clase were you save it
public class sav {
String n;
public sav {
n="";
public void addn(String x){
n=x;
public String shown(){
return n;
and them save it from the frame
sav sun = new sav();
sav.addn(f);
them call it from the other frame
sav sin = new sav();
String s = sin.shown();
label.setText(s);
and i think thats you want to do if its not please explain me better
bye

How can I pass a value to the command prompt?

I was wondering how can I pass a value to the command prompt with Windows and Linux? I'm more interested in Linux's system than Windows though. Is there a way to return info from the command prompt?

Here is a snippet from http://mindprod.com/jglossexec.html that explains how in detail.
Runtime.getRuntime().exec("myprog.exe") will spawn an external process that runs in parallel with the Java execution. In Windows 95/98/ME/NT/2000/XP, you must use an explicit *.exe or *.com extension on the parameter. It is also best to fully qualify those names so that the system executable search path is irrelevant, and so you don't pick up some stray program off the path with the same name.
To run a *.BAT, *.CMD, *.html *.BTM or URL you must invoke the command processor with these as a parameter. These extensions are not first class executables in Windows. They are input data for the command processor. You must also invoke the command processor when you want to use the < > | piping options, Here's how, presuming you are not interested in looking at the output:
Runtime.getRuntime( ).exec ("command.com /E:1900 /C MyBat.bat" );
Runtime.getRuntime( ).exec ("cmd.exe /E:1900 /C MyCmd.cmd" );
Runtime.getRuntime( ).exec ("C:\\4DOS601\\4DOS.COM /E:1900 /C MyBtm.btm" );
Runtime.getRuntime( ).exec ("D:\\4NT301\\4NT.EXE /E:1900 /C MyBtm.btm" );
There are also overloaded forms of exec(),
Runtime.getRuntime( ).exec ("command.com /E:1900 /C MyBat.bat", null);
Runtime.getRuntime( ).exec ("command.com /E:1900 /C MyBat.bat", null, "C:\\SomeDirectory");
The second argument can be a String [], and can be used to set environment variables. In the second case, "C:\\SomeDirectory" specifies a directory for the process to start in. If, for instance, your process saves files to disk, then this form allows you to specify which directory they will be saved in.
Windows and NT will let you feed a URL string to the command processor and it will find a browser, launch the browser, and render the page, e.g.
Runtime.getRuntime( ).exec ("command.com http://mindprod.com/projects.html" );
Another lower level approach that does not require extension associations to be quite as well set up is:
Runtime.getRuntime( ).exec ("rundll32 url.dll,FileProtocolHandler http://mindprod.com/projects.html" );
Note that a URL is not the same thing as a file name. You can point your browser at a local file with something like this: file://localhost/E:/mindprod/jgloss.html or file:///E|/mindprod/jgloss.html.
Composing just the right platform-specific command to launch browser and feed it a URL to display can be frustrating. You can use the BrowserLauncher package to do that for you.
Note that
rundll32.exe url.dll,FileProtocolHandler file:///E|/mindprod/jgloss.html
won't work on the command line because | is reserved as the piping operator, though it will work as an exec parameter passed directly to the rundll32.exe executable.
With explicit extensions and appropriately set up associations in Windows 95/98/ME/NT/2000/XP you can often bypass the command processor and invoke the file directly, even *.bat.
Similarly, for Unix/Linux you must spawn the program that can process the script, e.g. bash. However, you can run scripts directly with exec if you do two things:
Start the script with #!bash or whatever the interpreter's name is.
Mark the script file itself with the executable attribute.
Alternatively start the script interpreter, e.g.
Runtime.getRuntime( ).exec (new String[]{"/bin/sh", "-c", "echo $SHELL"}";

How can I save a jpeg? Cntrl-click on does not work as it did in version 2

In Firefox 2 I could hold down the Control key and click on an image to open a window with a "Save as" choice. Then I could name the image and chose a location to save it to. In Firefox 3, the window opens as before but the "Save as" choice does nothing. So how can I save website images as jpegs in a specified location such as a folder on my hard drive or on a memory stick?

Hi ddt333,
Base on my test again, I found that if the value of relative position is less than 1, it will uses the absolute position, you could change its position to relative position with the value less than 1 (e.g. 0), after save and re-check its position, you will
find that it still uses absolute position. By default it uses the absolute position, so when we add the new textbox to the document, its position is at left-top of document (left=0, top=0).
The RelativeHorizontalPostion property is used to specify its
relative to type (e.g. page, marging)
There are LeftRelative and TopRelative properties of shape, so please specify these properties’ value, then change
relative to type of shape.
Regards
Starain
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How can I change the value used in a Criteria Rule in a Subscription agent

Dear mobile heroes.... How can I change the value used in a Criteria Rule in a Subscription agent in a quality environment? (CRM 70 SP04).
I have built a subscription agent in dev, which uses a static where clause to filter activity_object on VKORG. I need to filter on a different VKORG value in the quality environment, but when I change the value of the sales org, the change is not saved. I have tried this even non 'activated' subscription agents, but it still does not appear possible to change and save the changes.
This poses a big problem because the VKORG value I want to use does not even exist in the dev environment, so I could not even rebuild in dev and transport the new agent to quality. Can anyone help me?

Too old to care now.

How can I save the Personal Settings done in the SAP standard viewer

Dear All,
I am facing the problem that I am not able to save changes made in the personal settings of the SAP standard viewer. I want to change the Colors to monochrome and I also want to change the background. Unfortunatelly these changes are not saved and I have to do that every time I am starting the viewer.
How can I save these changes?
Thank you very much for your help.
Best regards,
Markus

Dear Markus,
normally the personal settings for the ECL Viewer are stored in the registry. Here the value for background color is for example stored in the following directory:
HKEY_CURRENT_USER/Software/SAP/VCT_Retained/6.1/Common/de/ImageViewUtils
Depending in the language of the operating system the key has weither the value 'en' (english) or 'de' german.
So here the personal settings should be stored or can be modified directly.
Best regards,
Christoph

How can we make the value of pricing condition flow to the sales invoice?

At an intercompany process, we have the condition type PBXX at the purchase order. On the other hand, at the sales invoice (which is created by VF01) of the sames process, there exists the condition type PR00. The calue of the condition types PBXX and PR00 should be the same. How can we make the value of PBXX flow to the sales invoice? I can create new pricing procedures if needed. I can change the types of the pricing conditions (such as PBXX or PR00) included at the procedures (by customization) if needed. All I need is to have the value of the price at the purchase order the same with the sales invoice at the same process. The transaction codes used at this process are:
ME21N - Create purchase order
VL10D - Create delivery
VF01 - Create invoice
Thanks in advance for the answers...

Yes, i verified that the config item id in the pricing table and the cz_config_items table are the same (once we save the configuration).
The reason we have to do this is coz I have to pass additional parameters, which are item speciific (captured at confiugurator runtime session) while making a call to the pricing engine.
Hence, we are capturing some additional pricing parameters (during a runtime configurator session) in a custom table, and plan to link those to the corresponding items in the 'CZ_Pricing_Structure' table thru the config_item_id.

How can I save the 12-bits gray scale image ?

Software & Hardware
NI-IMAQ Vision 6.0
NI-IMAQ for 1394 2.0.0
Hamamatsu C4742-95
I acqured the 12-bits gray scale image (Format7 , 640X512 size , 12bits) successfully.
And CWIMAQViewer display the correct image of which the range is from 0(black) to 4096(white).
But, I don't find the way to save this image with 12-bits format T.T
Always, CWIMAQVision object save this image to 8-bit format.
I tested all formats - tiff, bmp, aip, png.
I think there are two possible problems.
1. I dont't know the way to save the 12bits gray scale image. :{
2. I dont't know the way to read the 12bits gray scale image that saved correctly.
How can I save and load the 12-bits gray scale image ?
What is the solution for this problem T.T ?

Hello,
I would recommend taking a look at the "ReadImage" Visual Basic project for more information on setting the image type and saving the image to file. When you run the program, make sure you select 16 bit for your image. You can also add another button to this example for saving the image. Within the click subroutine for the button, you can add the line:
CWIMAQVision1.WritePNGFile CWIMAQViewer1.Image, "C://image.png"
This method will save the image in the viewer as a png file. As long as it was loaded as a 16 bit image, it should save all of the 12 bit information into the file. You could then test the new image by loading it using the example (you can see the pixel values by right-clicking on the viewer and selecting Settings>>Show Image Info. The pixel value displayed in the info bar corresponds to the mouse position.
Best Regards,
Jesse D.
Applications Engineering
National Instruments

How can i save some image- profiles in the memory (RAM) of a system?

How can i save some image- profiles in the memory (RAM) of a system?
(and then I want to read out the memory and save the profiles in a HDD, but first it has to write in a memory, because the write-speed is better by the memory )

There must be an underlying premise for this question that I'm missing... When you run code everything is in memory... Programming 101. Create a variable, set a value to it, and it's in memory. Create a front panel control set a value to it and it's in memory. Data carried by the wires you use to connect your code is in memory. Or are you asking about controlling how that memory is managed - physical vs swap file?

How can i get all values from jtable with out selecting?

i have one input table and two output tables (name it as output1, output2). Selected rows from input table are displayed in output1 table. The data in output1 table is temporary(means the dat wont store in database just for display purpose).
Actually what i want is how can i get all values from output1 table to output2 table with out selecting the data in output1 table?
thanks in advance.
raja

You could set the table's data model to be the same:
output2.setModel( output1.getModel() );

How can I save a value in PO cache?

Similar Messages

Maybe you are looking for