How can I set a radio button to a be checked using an action script?

Acobat X: I have two radio buttons called EnrollmentType with different values. "New Student" and "Returning Student". I need to set 160 forms to returning student, Please
will this work?
getField("EnrollmentType").value = "Returning Student"

This is Adobe X Pro:
Ok when I click the properties of the radio button. Both have the same
"Enrollment type".
But each has a different "Radio Button Choice" under the  Options TAB.
It does work when I process the forms and save the data.
The field "Enrollment type" contains either "New Student" or "Returning
Student" depending on which option they picked.
I am sending these forms back to the parents to edit any new/changed info
and want it to have "Returning Student" checked since they are in fact
returning and not new anymore.

Similar Messages

  • How can I set a value of column in SSIS by using Replace

    How can I set a value of a column in SSIS using a Replace in Derive columns. I have here NameCode and I need to Set = 1 Where NameCode like LIKE '____99____'
    eg. 1006993010... if 5th and 6th characters are 99
    Else 0
    Hope to hear from someone soon and I appreciate great help here.

    If NameCode column is integer then you have to cast it correctly to String.
    I am adding that to the expression provided by Rajen.
    SUBSTRING((DT_WSTR,20)ProductCode,5,2) == "99" ? 1 : 0
    -Vaibhav Chaudhari

  • How can I select a radio button in a table regarding the data in the cells?

    Hi everyone
    This is the issue: I need to select the RadioButton which is in a table with data related to transfers in the cells next to it, so I need to select the correct radio regarding the data next to it.
    This is the whole process: First I go to the Add Recurring Transfer section and select the parameters of the transfer (Accounts, date, amount, months etc), then with VB code I capture those parameters from the page and store them into Global variables for further usage on my E-tester script.
    Right after that I need to select the radiobutton regarding the data of the transfer that I already created in order to delete it or modify it (Please see Attachment selectradio1.jpg)
    So How can I move along the table and compare each cell with the variables that I created with the transfer information, so when I finish comparing a row cell by cell and if all the comparison match well in that row, I could select the radiobutton of the row.
    Note: Second Attachment selectradio2.jpg shows the source code of the table...If you need more info please let me know
    Could you please help me with this problem?? I'm Kind of frustrated with this issue jejeje

    Here is an example. I uploaded mock html so that you can actually try this code. I think this does exactly what you are asking.
    Private Sub RSWVBAPage_afterPlay()
    Dim tbl As HTMLTable
    Dim tblRow As HTMLTableRow
    Dim tblCell As HTMLTableCell
    Dim strValue As String
    Dim rButton As HTMLInputElement
    ' ******** This would be your global variable. I put this so that values are seperated by a semicolin you can use what ever format works for you.
    strValue = "03/22/2008;03/22/2008;*************1977;*************1977;$25.25;Jan, Jun, Jul, Dec"
    ' Strip out the ; for inner text comparison
    strValue = Replace(strValue, ";", "")
    ' This will get the table but can be modifoed to be more specific
    Set tbl = RSWApp.om.FindElement(, "TABLE")
    ' This loops through all the rows in the table until a match to the strValue is found
    ' then clicks the radio button. Findelements allows you to specify a root element
    ' once the correct root row is found, FindElemets can get the correct radio button
    For Each tblRow In tbl.rows
      If tblRow.innerText = strValue Then
        Set rButton = RSWApp.om.FindElement("account", "INPUT", "NAME", , , tblRow)
         rButton.click
       End If
    Next
    End Sub
    I also uploaded the script I created. You should be able to run it and see how it works.
    This should get you going.

  • How can i set a long String to a xmltype field use PHP?

    i can set xml String to xmltype field with:
    $sql_insert_sql = "insert into g_province (p_id,p_regionid,p_provincenameobj,solt)
         values (g_province_q.nextval,'".$_GET['region_id']."',sys.XMLTYPE.createXML('".$xml_con."'),0)";
    but if $xml_con too long,i can not set this content into xmltype fields.
    then , i use :
    <?
    //(tabel_name:articles)DDL; //just for test;
    //create table articles (id number(11),content sys.xmltype);
    //----------This is insert test----------------------------------
    $conn = @OCILogon("in_user","user_in","bigfish");
    $stmt = @OCIParse($conn,"insert into articles (id,content) values(1,xmltype(EMPTY_CLOB())) RETURNING content INTO:CONTENT");
    $clob = @OCINewDescriptor($conn,OCI_D_LOB);
    OCIBindByName($stmt,':CONTENT',&$clob,"1",OCI_B_CLOB);
    OCIExecute($stmt,OCI_DEFAULT);
    if ($clob->save("<root><a>JUST TEST</a></root>")){
    OCICommit($conn);
    echo "Insert succes!";
    else{
    echo "Insert default!";
    //---------------Insert end-----------------------------------------
    //---------------Select start---------------------------------------
    $sql = "select content from articles order by id desc";
    $stmt = @OCIParse($conn,$sql);
    @OCIExecute($stmt,OCI_DEFAULT);
    @OCIFetchInto($stmt,&$rows,OCI_RETURN_LOBS);
    echo "<br>Content is:\"".$rows[0]."\"";
    //---------------Select end-----------------------------------------
    ?>
    run it ,display these errors:
    Warning: ociexecute(): OCIStmtExecute: ORA-22816: unsupported feature with RETURNING clause in /home/www/bigfish/sgtest/testclob.php on line 12
    Warning: save(): OCILobWrite: OCI_INVALID_HANDLE in /home/www/bigfish/sgtest/testclob.php on line 13
    Insert default!
    Content is:""
    Warning: Unknown(): ociclose_session: OCISessionEnd: ORA-00600: internal error code, arguments: [729], [28], [space leak], [], [], [], [], [] in Unknown on line 0
    how can i set long content to xmltype fields??

    geng sun,
    Ora-00600 is an internal Oracle error. You will need to open a tar with Oracle.

  • How can I set the highlighted button according to the last chapter viewed?

    I have a main menu with four buttons, each one of which takes me to a different chapter of track 1. When I press the MENU button on the remote and return to the main menu, I would like for the highlighted button to be the one corresponding to the last chapter viewed. How can I do this?
    Page 247 of the DVDSP manual says the following:
    Highlight Condition: Provides an alternative method to the Default Button setting for determining which button to highlight. When Highlight Condition is set to Default, the Default Button setting supplies the button highlight setting. When Highlight Condition is set to one of its stream settings (audio, subtitle, camera angle), the number of the stream last played determines the button to highlight. This setting can be overridden by any element that jumps to this menu, based on its jump setting.
    I know that SPRM 7 contains the value of the current chapter, so when returning to the main menu I would like to use SPRM 7 to set the Highlight Condition, but I don't see a way to do that, since the only options for Highlight Condition are audio stream, subtitle stream, and camera angle.

    Ah. Pre-scripts.
    I would do this by tracking the menu, certainly, but I'd do that by using a set of scripts not as prescripts. So, if your main menu is the start up item for the disc, create a script that reads:
    mov GPRM0, 1
    Jump main menu
    and set that as the start up item instead. Now create a second script:
    mov GPRM0, 2
    Jump Menu2
    and use both of these scripts on any button that goes to a menu. For example, on the Main Menu you'll have a button that links to menu2... point that button to script 2 instead of the menu itself. Similarly, on the chapter menu if you've got a button that takes you back to the main menu, point that button to the first script.
    For your menu call script you can now do this:
    mov GPRM1, SPRM8
    div GPRM1, 1024
    Jump Main menu \[GPRM1\] if (GPRM0 = 1)
    Jump Menu2 \[GPRM1\] if (GPRM0 = 2)
    This could also be the end jump script for both tracks, too.
    Now, Main menu will have three buttons, one for track 1, one for track 2 and one to go to the second script. Track 1 menu call and end jump goes to the last script, track 2 does the same. On the chapter select menu you point each button to the relevant chapter in track 1 and let the scripts do their job whenever a menu call is made or the track ends. The script will see you were on Menu2 and send you there, and SPRM8 will get you back to the button you last selected.
    If, instead of this, you want to go to the button that represents the last chapter played on the chapter menu, and not the last button pressed, but still be able to get to the last button on the main menu then the script changes a bit:
    Goto 5 if (GPRM0 = 2)
    mov GPRM1, SPRM8
    div GPRM1, 1024
    Jump Main menu \[GPRM1\]
    mov GPRM1, SPRM7
    Jump Menu2 \[GPRM1\]
    This sends you to the button relevant to the last chapter played if you came from the chapter menu, by jumping through the script to the bit that deals with Menu2, else it will work out the last button selected (and we assume this must have been on the Main menu because GPRM0 !=2 in that case), and send you to the main menu with that button highlighted.
    If you've got any more scripts than that running, you've got too many... and get rid of the pre-scripts - they are more trouble than not, and don't work if you are using GPRM based button jumps anyway.

  • How can I get my radio buttons on one line?

    I have tried to put two radio buttons in one text cell in a table, but I can´t get them side by side. They stack on top on each other, in a vertical list, no matter what I do.
    Sorry for the stupid qustion, but this is my first attempt in LiveCycle Designer.

    Thanks for your time. I found the soloution. I changed the flow direction in the suborm from "top to bottom" to "Western text"

  • How can i set my old ipod touch up to be used by someone else ie wipe all my details etc off and set it up for new user

    Hi i need help i have got a second hand ipod touch generation 4 how can i delete all of the previous owners stuff and set it up for myself to use for facetime etc

    Just restore it. When it gets to the point that asks you if you want to restore from back up or set up as new, select new.
    Basic troubleshooting steps  
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
    Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
     In Memory of Steve Jobs 

  • How can I set the submit button to email only certain pages of the pdf not the entire pdf?

    We have a pdf that is a hundred pages or so where each page is an individual product that the customer can select for purchase. At the end of the pdf is an order form. We want to be able to email just the few pages which are the form as a pdf. The default function of the submit button is to email back the entire pdf. As there any way to just select whcih pages would be submitted?

    The problem is for people not using an email client like Outlook. In the version of Reader my boss was using, you had to save the FDF file to your hard disk and then open your browser to go to your web based email and write an email and attach the file. In the newest version of Reader it will open a browser window and create a draft for you, but he thought it was to much work if people were using older versions of Reader. He was really looking for something straightforward where all they had to do is push a button and it was submitted.

  • How can i disable checkbox/radio button/popup/butt...

    In Xhtml, to disable a form element we use disabled="disabled". but how to disable form elements in mobile?.

    It actually does work. What you have to do is drag another icon down to the bottom left where the radio is defaulted. It will automatically kick up one of the other icons that is highlighted. For example, I dragged the Songs icon down and the Genius icon popped up to the top. Then I dragged the genius back down to the second spot and the Radio one goes to the right until it pops up. You just have to do it four times.
    It's kind of a pain, but it does work. Give it a try. This is what it ends up looking like.

  • How can i set up to see large web screen without using Ctrl++ on every website i open?

    IE can set simply chossing zoom size and I can see big enough to make my eyes relaxed for a person who has eyesight problem. Is there a way to make it to see large on every website i opened? I'm sure there is a way. Please let me know.

    The Firefox [https://support.mozilla.com/en-US/kb/Page+Zoom Page Zoom] feature does a domain by domain level of saving the users preferred zoom level settings, there is no default Page Zoom level setting in Firefox, as with some other browsers.
    Try the Default FullZoom Level extension: <br />
    https://addons.mozilla.org/en-US/firefox/addon/6965
    Or the NoSquint extension: <br />
    https://addons.mozilla.org/en-US/firefox/addon/2592/

  • How can you set up ECCN in Material Master if not using Foreign Trade

    After many years, we now have the need to store ECCN codes on our Material Masters.  Although I see on the Foreign Trade view of the Material Master under Legal Control what appears to be a way to set this up, the fields are grayed out and do not seem to have an option to add?  We use Commodity Codes, and we need to just store the ECCN like we do the Commodity Code.  Any ideas?

    Hi,
    Please check this path.
    SPROSales and distribution-Foreign trade/customs---legal control .
    Here yiu can define the ECCNS and Legal requirements and license types and their groupings, asign to depature countries etc to see that they get defaulted at MM01 screen salesgeneral plant data.
    Regards,

  • How can I set up my other emails on my pc using icloud?

    Hi, I am new to the iphone and icloud.  I was able to setup my other email accounts in my iphone 4s, however, when I use my pc, I only see the icloud account.   I am unable to set up any other email accounts.  Please help.
    Thanks, V. Zak

    The first message that AirPort Utility will display during the auto setup will be that the Express will be confgured to "extend" the network. When AirPort Utility analyzes the network further, and sees that the Express cannot "extend" the 3rd party network, the next message will indicate that the Express is being configured to "join" the wireless network.
    Once the Express is configured, if you later go into AirPort Utility to check the settings under the Wireless tab, you will see that the Wireless Mode is indeed "Join a wireless network".

  • How can I set up personal hotspot on iPad 3

    How can I set up personal hotspot on iPad 3, I use 3G services from Etisalat  SIM

    If your carrier supports the personal hotspot on the iPad (and some carriers only support it on the iPhone) then it should appear in Settings > General > Cellular Data > Personal Hotspot - if it doesn't appear then contact your carrier in case they don't support it or it might be an extra fee/subscription with them
    Personal hotspot : http://support.apple.com/kb/HT4517

  • How can I set a value in a field before create when a New button is clicked

    Hi,
    I am using
    JDeveloper 10.1.3.1.0.3984 and
    JHeadstart 10.1.3.1 release 10.1.3.1.26
    I have one group and there is a detail group under that group.
    From main group to detail group there are 3 field relating those groups.
    field1
    field2
    fieldSEQ (auto-generated by database trigger)
    These 3 fields are PK.
    In the detail group, there is a New button. So, when the New button is clicked, it tries to create the record with those 3 fields value as those are coming from main group. As a result it's giving the duplicate error as that record already exists in the table.
    But I don't want to create the record with that SEQ as that will be created in the trigger.
    How can I set the SEQ temporarily any no. (-1) before create when the New button is clicked?
    Can anybody help?
    Thanks
    Syed Jabbar
    University of Windsor
    Windsor, ON, Canada

    Hello Syad,
    What I would suggest is setting the sequence number at the creation of the entity object (so in the create() method) by using the database sequence. This way it will always be unique.
    So something like:
    protected void create(AttributeList AttributeList) {
    super.create(AttributeList);
    SequenceImpl sequence =
    new SequenceImpl("KCP_SEQ", getDBTransaction());
    setFieldSeq( sequence.getSequenceNumber());
    If this still does not solve it: please go to the ADF Forum since this problem is an ADF problem, not a JHeadstart problem.
    Regards,
    Evert-Jan de Bruin
    JHeadstart Team.

  • How can we set two events in a single button ???

    HI
    I created a button named bold , when i click it first time the textarea texts will became as bold..
    I created another button bold cancel when i click at that button textarea texts will became plain...
    But how can i set that controls in a single button (in button bold) ???
    Would anybody please tell me ...

    I would have one event listener that is aware of a boolean variable that has scope outside of the event listener, isBold for instance?
    When you click on the button, have the event listener toggle the boolean variable and then if true, set the text to bold, if false set the text to plain.

Maybe you are looking for