How can i shoulD use 'select' for ALV

Hello guys,Please Help
how can i summation as date   with alv.
how can i  use 'group by' in select statement.
Normally my alv table like this.
I want to this.

MY STANDART ALV QUERY IS THIS.
select  *  appending corresponding fields of table  itabon
  from ( lips
           inner join likp
           on LIKP~VBELN = LIPS~VBELN )
    where
         likp~WADAT_IST  between  s_WADAT-low and s_WADAT-high  AND
         likp~VKORG eq 'O001' AND  LIPS~LFIMG ne 0
I WANT TO QUERY FOR MY SECOND PICTURE.
Thank you

Similar Messages

  • How can I reduce the selection for the characteristics value in a BW query

    Good morning,
    I need to find out how I can reduce the selection for the characteristics values in a BW query.
    In a BW query I have a characteristic "Due month".
    The characteristic values shown in the query are from 01.2001->03.2007. I would like to reduce it to the last 2 years,in the query view,  without deleting the data for the other years in the cube.
    Do you know how this can be done?
    Thank you in advance for your feedback.
    Kind regards,
    Linda Verding
    Staff Consultant - CSC

    hi,
    First thing you have to do is check the report how the data is being restricted only to those months.
    1) one it can be variable in which the code is written for that to populate for last few years.
    or else it must have been hardcoded for these months.
    Go into your report and underneath the characteristicsCALMONTH there must be an variable or hardcoding.
    You need to change this here in the report.
    You dont have to delete anything there.
    Regards, Siva

  • How can I trigger a USER_COMMAND for alv grid "toolbar" ???

    Hi,
    i have the standard ALV Grid "toolbar" and if i click to the Button "&LOCAL&COPY_ROW" than i want try to make a Refresh to my ALV Table in the Event "afteruser_command"_!!!!
    Here is the implementation of my Event *"afteruser_command":*_
    METHOD on_after_user_command.
    ........DATA: ls_stable TYPE lvc_s_stbl.
    .....CASE e_ucomm.
    .....WHEN '&LOCAL&COPY_ROW'.
    ........MESSAGE 'LOCAL_COPY_ROW' TYPE 'S' DISPLAY LIKE 'E'.
    ........ls_stable-row = 'X'.
    ........ls_stable-col = 'X'.
    ........CALL METHOD gr_grid_d0100->refresh_table_display
    ..............EXPORTING
    .......................is_stable      = ls_stable
    ..............EXCEPTIONS
    .......................finished       = 1
    .......................OTHERS         = 2.
    ......ENDCASE.
      ENDMETHOD.   
    But it doesnt work.
    Is there another function code for the Copy Button????
    Thanks
    Ersin

    Hello Ersin,
    the events "after_user_command", "before_user_command" and "user_command" will not be fired when selecting this command!
    In my opinion, there is no solution, to fire these events, using this alv-function!
    But there is a trick:
    1. Register on the event "toolbar" with an own method:
          toolbar_own          for event toolbar of cl_gui_alv_grid
                                       importing e_object
                                              e_interactive,
    In this method change the function code of "&LOCAL&COPY_ROW", but don´t change the row of the entry, because the button should appear on the same place in the toolbar:
        field-symbols: <ls_toolbar>  type stb_button.
        read table e_object->mt_toolbar with key function = '&LOCAL&COPY_ROW'
                                        assigning <ls_toolbar>.
        if sy-subrc = 0.
          <ls_toolbar>-function = 'COPYROW_OWN'.
        endif.
    2. Register on the event "user_command" ( I think, that´s clear ):
          user_cmd_own           for event user_command
                                              of cl_gui_alv_grid
                                              importing e_ucomm,
    ( don´t forget the set handler-commands for both events:
      set handler po_alv_own->user_cmd_own              for po_alv_own.
      set handler po_alv_own->toolbar_own               for po_alv_own.     )
    3. Now you can react in the method "user_command" on your own function code:
        case e_ucomm.
          when 'COPYROW_OWN'.
            perform copy_row using    me
                             changing gt_bis_cf_out.
    Sample code for copying the current line:
    FORM COPY_ROW  using    po_alv_own          type ref to gcl_alv_own
                   changing pt_table_alv      type gt_table_alv_t.
      data: l_index         type i,
            ls_table_alv   type gs_table_alvt_t.
      call method po_alv_own->get_current_cell
         importing
           e_row     = l_index.
    *      e_value   =
    *      e_col     =
    *      es_row_id =
    *      es_col_id =
    *      es_row_no =
      "read the current line:
      read table pt_table_alv index l_index
                               into ls_table_alv_out.
      "some changes for the new row:
      clear: ls_table_alv-style,
             ls_table_alv-tabix.
      "insert the new line:
      add 1 to l_index.
      insert ls_table_alv into pt_table_alv index l_index.
      po_alv_own->refresh( ).
    ENDFORM.                    " COPY_ROW
    In this manner the events "after_user_command", "before_user_command" are fired, too!
    For information: My problem was, that the ALV-function copied the style-information too, so in the new line, some fields are not editable. At least his field must be cleared!
    Best regard
    Thomas Scheuermann

  • How can I register an EVENT for ALV-GRID?????

    Hi,
    i have create Events for my ALV-Grid Table (cl_gui_alv_grid).
    But there is one Problem!!!!
    Which Event must i create, if users write something in the ALV row and press to key "enter" ???
    With kind regards
    Ersin

    Did you set the handler for one of forementioned events? If no, please suplement your code with the following
    "create handler class
    CLASS lcl_gui_alv_event_receiver DEFINITION.
      PUBLIC SECTION.
        METHODS:
    "        Controlling data changes when ALV Grid is editable
              handle_data_changed FOR EVENT data_changed OF cl_gui_alv_grid
                                  IMPORTING er_data_changed e_onf4 e_onf4_before e_onf4_after,
    "       To be triggered after data changing is finished
              handle_data_changed_finished FOR EVENT data_changed_finished OF cl_gui_alv_grid
                                           IMPORTING e_modified ,
    ENDCLASS.                  
    "implement you handler methods
    CLASS lcl_gui_alv_event_receiver IMPLEMENTATION.
      METHOD handle_data_changed .
        MESSAGE 'Data changed' TYPE 'I'.
      ENDMETHOD.
      METHOD handle_data_changed_finished .
         MESSAGE 'Data changed finished' TYPE 'I'.
      ENDMETHOD .
    ENDCLASS.
    data:  g_alv_event_ref TYPE REF TO lcl_gui_alv_event_receiver.
    CREATE OBJECT g_alv_event_ref.
    "set handlers for these events
    SET HANDLER:
      g_alv_event_ref->handle_data_changed FOR g_alv_grid_ref,
      g_alv_event_ref->handle_data_changed_finished FOR g_alv_grid_ref,
    "register the events after pressing enter
    CALL METHOD g_alv_grid_ref->register_edit_event
          EXPORTING
            i_event_id = cl_gui_alv_grid=>mc_evt_enter.
    Regards
    Marcin

  • HT1349 how can I change an email for authorization, the email address we used years back, is no longer a valid email address

    how can I change an email for authorization, the email address we used years back, is no longer a valid email address

    SfromW wrote: ... how can I change an email for authorization, the email address we used years back, is no longer a valid email address
    How to change account here: http://support.apple.com/kb/PH1641
    If you need more help, start here: http://www.apple.com/support/itunes/
    SfromW wrote: ... we can't remember the password from the old email address (for authorization)...
    Help Retrieving and changing passwords here: http://support.apple.com/kb/HT1911
    If you need more help, from iTunes for Windows, click  iTunes > iTunes Store > Support
    SfromW wrote: ... apple should make it easier to transfer authorization authority....I would think anyways.
    You might want to rethink your thoughts about making transferring authority easier.  Making it too easy would certainly degrade your account's security.  If you still believe it should be easier, you can send feedback directly to Apple via http://www.apple.com/feedback/itunesapp.html
    You will not get a response, but you can be certain that the responsible Apple people will see your input for consideration in FaceTime product development.
    As a new user, please understand that you are NOT directly addressing Apple here.  For more info about Apple discussions, start here: http://discussions.apple.com/static/apple/tutorial/etiquette.html 
    Message was edited by: EZ Jim
    Mac OSX 10.7.4

  • I have used Airport Time Capsule with my iMac for several years. I recently purchased a MacBook Air and when it tried to backup to Time Capsule it couldn't because Time Capsule is full. How can I now use the 3TB Airport Time Capsule to back up both?

    I have used Airport Time Capsule with my iMac for a couple years. I recently purchased a MacBook Air and when it tried to backup to Time Capsule it couldn't because Time Capsule is full. How can I now use the 3TB Airport Time Capsule to back up both the iMac and MacBook Air? I don't mind losing earlier backups. I have excluded some items from backing up, but since the Airport Time Capsule is full, I can't even begin to back up the MacBook Air.

    On your Mac.......
    Open Finder > Applications > Utilities > AirPort Utility
    Click on the Time Capsule icon, then click Edit in the smaller window that appears
    Click on the Disks tab at the top of the window
    Click Erase Disk
    On the next window that appears, select the Quick Erase option, then click Erase
    The operation will only take a few minutes.
    Now you are ready to start new backups of both Macs.  Back up one Mac first, then back up the other.  Do not try to back up both Macs as the same time.

  • How can I get (using API) the current sort column for some report

    hello,
    How can I get (using API) the current sort column for some report ? For example something like "fsp_sort_1_desc" - if the user sorts by the first column ?
    I cannot use the :REQUEST for this, sometimes the current sort column is not in the :REQUEST, but it is still active.
    I thought it was posssible by using
    APEX_UTIL.GET_PREFERENCE (
    p_preference IN VARCHAR2 DEFAULT NULL,
    p_user IN VARCHAR2 DEFAULT V('USER'))
    RETURN VARCHAR2;
    function, but I don't really know which preference should I pass as parameter.
    looking in WWV_FLOW_PREFERENCES$, i saw preferences_names like FSP4000_P527_R6281510839654570_SORT , I'm not sure how this name is formed.
    I'm using generic columns for that complex report (which has a flexible number of columns shown), and the idea is that sometimes I have to overwrite that sort column, in case the user chose the version of the report with fewer columns than the previous one.
    Can I get (using API) a list of all preferences set for some user ?
    Thank you,

    seems that it is FSP<app_number>P<pagenumber>R<regionnumber>_SORT.
    is there anyplace where I can get these kind of things documented ?
    Thank you.

  • I'm using Premiere Elements 11, which automatically opens in a project window for HD. I want to reset the default for SD. How can I reset the defaul for opening a project?

    I'm using Premiere Elements 11, which automatically opens in a project window for HD. I want to reset the default for SD. How can I reset the default for opening a project?

    scottypet
    For Premiere Elements 11 and 12, you cannot change its default project preset from NTSC AVCHD Full HD1080i30 or its PAL counterpart PAL AVCHD Full HD1080i25 to something else.
    For each project, you can set the project preset manually if you do not want the program to take over setting the project preset based
    on the properties of the first drag to the Timeline.
    To set the project preset manually, open the project to the Expert workspace, go to File Menu/New/Project and Change Settings.
    In the Change Settings area, change the project preset. Before you exit that area, be sure to have a check mark next to "Force Selected Project Setting on This Project" in the new project dialog.
    Then you import your source media, using the appropriate Add Media choice.
    ATR Premiere Elements Troubleshooting: PE11: Accuracy of Automatic Project Preset (New Project Dialog) Setting
    If you want a version of Premiere Elements that uses the default project preset of NTSC DV Standard or its PAL counterpart PAL DV Standard, then you need to look to a version of Premiere Elements earlier than 11.
    Please let me know if you have any further questions on this or need clarification.
    Thank you.
    ATR

  • Can I purchase a Creative cloud license in Hong Kong and assign for our China staff use? if no how can I purchase / use the creative cloud in China?

    Can I purchase a Creative cloud license in Hong Kong and assign license for our China staff use? if no how can I purchase / use the creative cloud in China?
    thank you!

    You should be able to find some information : Other ways to buy | Resellers | Adobe Hong Kong
    View the latest list of countries where Creative Cloud is available for individuals, teams, and small businesses. Enterprise customers should request a consultation.
    We’re working to make Creative Cloud as widely available as possible and will share more details about country availability over time. While individual membership may not be available in your country, you may be able to purchase a team membership through a global Adobe reseller.
    Creative Suite 6 products are also available for purchase. Learn more ›
    Creative Cloud Help | Creative Cloud / Common Questions
    Regards
    Rajshree

  • Can 2 different users with 2 different Iphones use the same itunes to backup each phone separately? if not how can I have a backup for 2 different iphones on the same laptop?

    can 2 different users with 2 different Iphones use the same itune program to backup each phone separately? if not how can I have a backup for 2 different iphones on the same laptop?

    Here is your answer:
    http://support.apple.com/kb/HT1495

  • I have ad Apple ID on my iPad , when I use the apple on my iPhone for the first time, I put in my Apple ID for the iPad, didn't work. Need to create a new one. Why? How can I just use my iPad ID on my iPhone?

    I have ad Apple ID on my iPad , when I use the apple on my iPhone for the first time, I put in my Apple ID for the iPad, didn't work. Need to create a new one. Why? How can I just use my iPad ID on my iPhone?

    Hi kamfong,
    Went to Settings where?
    If you want to use your exisiting Apple ID on your iPad, you need to:
    1.     Go to Settings>iTunes & App Store and sign out the new ID, and then sign on the old one
    2.     Go to Settings>iCloud, scroll to the bottom and delete the iCloud account, and the sign back onto iCloud using the old ID
    You still have not indindated why you are saying that using your old ID originally "didn't work". What do you mean by that? Did you get some sort of error when you tried to sign on with your exisiting Apple ID?
    Cheers,
    GB

  • How can I change (or select) what is being being used when I share, as the file cover. When I Share lets say "Master File" i want to select a frame that is used as the file cover. So when its on my desktop I see this image as the file icon.

    How can I change (or select) what is being being used when I share, as the file cover. When I Share lets say "Master File" i want to select a frame that is used as the file cover. So when its on my desktop I see this image as the file icon.

    I don't think Finder does this (I've tried).
    iTunes does though. Where you can set artwork or the "poster frame"...
    This may not be what you want but if it helps, I know 2 ways  do this is
    Open the video in QuicktimePlayer7 | View | Set Poster Frame (even then, you might need to save it as .mov (ie in a 'mov container').
    Drag the file into iTunes and set the artwork (as in http://www.dummies.com/how-to/content/adding-album-cover-art-or-images-in-itunes .html)
    From there, iTunes will use that frame as the "poster frame" ie the photo/frame that shows when you browse your videos. Which is what you want, but limited to iTunes.
    When I do either of these above, the frame I set does not show when exploring files in "Finder" (or in the other Explorer tool I use called "Pathfinder").
    So it maybe, that exactly what you want, is not possible.

  • What are Parameters? How are they differenet from Variables? Why can't we use variables for passing data from one sequnece to another? What is the advantage of using Parameters instead of Variables?

    Hi All,
    I am new to TestStand. Still in the process of learning it.
    What are Parameters? How are they differenet from Variables? Why can't we use variables for passing data from one sequnece to another? What is the advantage of using Parameters instead of Variables?
    Thanks in advance,
    LaVIEWan
    Solved!
    Go to Solution.

    Hi,
    Using the Parameters is the correct method to pass data into and out of a sub sequence. You assign your data to be passed into or out of a Sequence when you are in the Edit Sequence Call dialog and in the Sequence Parameter list.
    Regards
    Ray Farmer

  • I'm trying to update iOS 7 and it says I need 3.4 GB of storage to update.. I currently have on my storage 797 MB and 12,6 GB used. How much storage should it write for me to be able to update?

    I'm trying to update iOS 7 and it says I need 3.4 GB of storage to update.. I currently have on my storage 797 MB and 12,6 GB used. How much storage should it write for me to be able to update?

    If your ipad has only 797 MB free and it tells you that you need 3.4 GB to update, then you need to begin deleing files, whatever it takes to free up space.
    Consider...
    Delete apps you don't use.
    Delete videos you don't want (these take up a lot of space).
    Do you have a lot of emails stored on the device?
    Are there apps that store data files, like a PDF reader?  If there are a lot of these, you need to delete some.
    The bottom line is that you need to remove data and/or apps on your device to make more storage available.
    But for videos and photos, always sync them to a computer first to archive them.

  • My phone was stolen, I have moved it in lost mode,but I can see that whoever has it,is changing phone name and can use it until I activate lost mode again.Can I do it permanently? How can I cancel ICloud back for the stolen phone,it blocks Cloud memory?

    My phone was stolen, I have moved it in lost mode,but I can see that whoever has it,is changing phone name and can use it until I activate lost mode again.Can I do it permanently? How can I cancel ICloud back for the stolen phone, as I cannot delete the stolen phone backup (says that backup is being in use) and this is keeping memory occupied in the Cloud and I cannot back-up the other devices.

    http://support.apple.com/kb/ht2526

Maybe you are looking for