How can I tell if my Logic 7 is academic

I purchased Logic 6 academic version years ago (still emagic). I purchased Logic 7 upgrade back in 04. No problems. The box sticker just says "logic 5/6 gold upgrade". I checked splash screen, the XS key...nothing refers to academic. I want to purchase Logic 8 upgrade...but I know academic versions are not upgradable...but...I don't think my Logic 7 upgrade is an academic upgrade...isthere anyway to tell?

There are no academic upgrades. But the easiest way of telling is starting the program, if it is academic, the Logic logo will read Academic.

Similar Messages

How can I tell if the logic board is bad?

My mom has a flat-panel iMac (20") that has been refusing to boot since this past weekend. My sister and I tried every trick we could come up with to get it to boot, but the only thing that resulted in anything other than a blinking question mark was powering up while holding the eject button. This caused the computer to boot up from the external firewire hard drive. We were not able to get the disc tray to open, so we couldn't start up from the Hardware Test CD. I have two questions:
Is there a way to physically force the tray to open? (We've tried all the suggestions offered by Apple Support, to no avail, and the iMac has no hole for the old paper-clip trick.)
Is there a way to tell whether the hard drive is dead or the logic board is bad? We strongly suspect it's one or the other.
Flat-panel G4 iMac (20") Mac OS X (10.3.9)

Hello! You have one or two problems and both are likely related. The fact that the cd/dvd drive isn't responding indicates problems with it however it could be related to the hard drive problem. The fact that it will boot from another source indicates that the logic board is ok. If you like to tinker then you might want to consider buying a new computer and using the one with problems to learn more about working on one. I've never been a fan of all-in-one type computers because when component goes out you either in for a difficult job in repairing it yourself or you forfeit the value on the component (s) that are still good. That's why I personally think towers are better long term values. Sure they're not quite as "cool" as the iMac but I'd rather pay for computing power and long term useability. Tom

How can I tell the difference between Academic and non-academic version

I would like to purchase Logic Express on Ebay. The Apple part number is
MA338Z/A
How can I tell if this is the Academic or non-academic version?
THanks

ok, but there is no way to tell from the Apple part #?
I thought that the /A might mean Academic but it seems this same part number applies to the non-academic version:
MA338Z/A
Thanks

How can I tell if replacement LCD is "good"?

Hi everyone
I bought a used 20" Intel iMac that supposedly only needed a hard drive and a new LCD panel in order to work. The hard drive was easily installed. I ordered a replacement panel off eBay and installed it, but I'm seeing a grey screen with lots of tiny black rectangles on it. I figured that maybe there's a problem with the video card, so I scrounged up a Mini-DVI to DVI adapter, and connected an external monitor. However, nothing ever displays on that external monitor. If there is truly a problem with the video card (the logic board?), I'm going to stop buying parts and sell the carcass....
Anyway, how can I tell if the replacement LCD is good? Does the weird pattern I'm seeing on the display indicate a problem with the panel or with the video card? And shouldnt the iMac automatically output to the external display when I connect it via the adapter?
Thanks!

Hello, does it sound like it's booting up at all?
If we could get it to boot, we could take a screen grab & that would tell us, if the screen capture was indentical to wahat you're seeing then it'd be the graphic card, since it captures it from the card/VRAM, not the screen actually.
As far as the adapter I think you have to have it at least booted up part way for a second monitor to even light up, not positive though.

How can I tell what control the modulation wheel is assigned to?

Hello,
I understand how to reassign the Mod Wheel and other controls with Command-L. However, once I deleted my learned assignments I realized that the modulation wheel had not been working as it should with the thousands of other presets. Apparently, when I assigned it to the EVP88's Tremolo, it became deactivated from controlling all sorts of fun stuff on the synths.
My questions is in a two parts:
1. If I open up some presets in the ES E (for example), I hear the mod wheel tweaking the sound, but I don't see the control it's manipulating when I'm looking at the instrument window on the screen. How can I find out what control the mod wheel is linked to in each instrument?
2. If I want to reassign the mod wheel on a particular instrument preset, how can I tell logic that this assignment should only be aplicable in a particular preset, and to forget that reassignment when swiching instruments or presets?
Thanks in advance,
I'm proudly 10.6.8 and staying there
Logic 9.1.8
MacBook pro early 2011 refurbished

I don't recall there being a way that I've seen to find out if the Hotspot is connected to Band 4 or Band 13. The diagnostic pages are very basic.
A good rule of thumb with Band 4 is to consider the following. If you have 3 bars or less, you're likely not on Band 4. The device will head to Band 13 as it will usually provide better signal reliability. If you're indoors, you're more likely to be on Band 13.
Also take note that Wi-Fi is a common limiter on the speeds you'll get. You'll usually see nothing more than 30Mbps on most Wireless N devices. Connect to the Hotspot using USB Tethered mode and speeds should be a bit better.

Imac back from repair - how can I tell what tech did?

Got my imac out of repair today from CompUSA. The Apple tech wasn't there when I picked it up so I could't talk to him. Anyway, I am not sure what the tech did to my computer. Another worker said something about a "logic board" but that's it. Is there a way, in the logs somewhere for me to examine exactly what the tech replaced/repaired? If it was the logic board that was replaced then how can I tell? TIA

If your logicboard was replaced, your serial number will not appear when you go to "about this Mac" and then to System Profiler.
My serial number still appeared after each time I got the logic board replaced.
If the logic board was replaced, the number reported via software won't match the one stamped on the bottom of the iMac's leg.

How can I tell what table(s) have the most transactions against them

Hello, in Oracle 11.2.0.3, RHEL 6 x86-64, how can I tell what tables have the highest transaction activity?
Picked "Objects" because I could not find a space related to performance tuning
Humbly,

What version of Oracle are you running (standard or enterprise)?
Easist system is to run an AWR or statspack report. If you run either of these you will see sections on segments (so segments by logical reads, physical reads) which is easily digestible.
v$segment_statistics will also give you a breakdown on segment access.

IPhone 5 is fried, how can I tell amount of GB?

My phone is pretty much a brick, doesn't boot up past crazy screens of code or the plug/itunes screen. How can I tell its storage capacity? Or what its storage capacity would be if it was functional?

Actually, the logic board wasn't toast. I brought my phone and the replacement a friend sent me to a local apple repair shop with the goal of swapping my pristine screen and decent battery into my friend's. I'd have a near perfect 16 GB phone to get me through until whenever and a backup (if less than optimal) screen and battery handy in case I did damage to the one I was using.
When I picked up the phones, I was surprised to find that for $50 total I had two perfectly functioning black and white Frankensteins. Turns out my fried phone just needed the contacts cleaned with alcohol and a wipe. I'm very happy that I rejected the $249 replacement option at the apple store.
And using the menus as Steve Jobs intended, I confirmed that my formerly fried phone is 64GB.

My macbook pro no longer connects to my TV with the mini dvi to hdmi adapter. A while ago the computer fell down and hit the cable. How can I tell if the computer is working ok. Doesn't show mirroring any more.

My macbook pro no longer connects to my TV with the mini dvi to hdmi adapter. A while ago the computer fell down and hit the cable. How can I tell if the computer is working ok. Doesn't show mirroring any more. Was working while watching a movie but when I pulled it out from the computer and put it back in the system would no longer mirrorr the screen on the TV.

The best option is an appointment at an Apple store genius bar. The evaluation will be for FREE!
Ciao.

My ipad does not have the amount of GB on the back and in the settings it says 56gb! Also there is no setting called regulatory. It is an ipad 4 retina w wifi that i got as a Christmas present. Could it be a fake? How can i tell?

My ipad does not have the amount of GB on the back and in the settings it says 56gb! Also there is no setting called regulatory. It is an ipad 4 retina w wifi that i got as a Christmas present. Could it be a fake? How can i tell?

The amount of storage that is shown on the box and in Settings are calculated differently - the package uses 1 billion bytes as a gig (i.e. decimal), whereas in Settings it's shown as the binary definition : http://support.apple.com/kb/TS2419
Also some space has been used for iOS, the built-in app and some space is lost due to formatting.

How can I tell what is "Auto Launching"

User's (me) tech background:
Fairly technical user here, but getting pretty rusty. In a past life (late '90s) I was a network administrator as well as server admins for NT 4, Novell (up to 4.11), AIX, and HP-UX servers. Used to be really good at a command prompt ($ or #) in AIX and HP-UX as well as MS DOS. I do have ROOT enabled on my Macs and I am not afraid to use it. However, I know how severe the consequences can be (trashed a customer's AIX server once using a -R switch in the root directory), so I am extremely cautious and must be confident of the instruction. Can probably fix most anything with some guidance........
Here is the problem........ I have recently developed an error on boot, say within the last couple of weeks, where it tells me that some Vista application won't run because VM Ware will not initialize. The problem is VM Ware is not loaded on this computer (15" MBP model 8.2, i7 processor, 16MB of RAM, OS 10.7.4........ bought as a "refurb", never had a problem, have used this workstation for several months now). Boot Camp is not configured on this machine either. Nothing is in the Dock that would knowingly trigger this. When I go into System Information, I find nothing set as a "Startup Item" (screen shot attached) , making me think that I am looking in the wrong place. Where should I be looking?
Interesting enough, when I go to System Information, and look under "Applications", I do see a lot of Vista items, including apps from an older MBP that I do not connect to (on same network, they have "rights" to connect, I just never do as there is nothing on there I need). I have attached a screen shot of this as well.
Please, someone, can you give me some advice here?
How can I tell where this auto loading of this Vista app is coming from
How do I get rid of it
Why did it happen "suddenly"?
Can I go into System Info/Applications and delete any Vista or VM Ware apps?
If I cannot do this via "System Info" can I remove (rm OR mv) the files from whichever system directory stores this data?
This is puzzling and quite concerning. I would be deeply grateful if there is a "Yoda" out there that knows how to fix this.......
Thanks in advance,
Bill

Managing your data usage is very important Bag02231958. I would like to thank ttipgem for the great suggestion to see what is using data on your phone. However, when you access the internet, social media apps, stream data, videos, music, etc. that uses data on your phone. Unfortunately, we do not have a list of what specifically is being accessed on the device to incur data. You do have the ability to view data records and time frames online via My Verizon http://bit.ly/xB4iTc
Thank You,
MichelleL_VZW
VZW Support
Follow us on Twitter @VZWSUPPORT

"Volume not found" I have 3 iphoto_libraries stored in a external disk, while the actual files are in other external disk. Ive moved together iphotolibraries and files but: HOW CAN I TELL THE LIBRARIES WHERE TO FIND THEM NOW?

I have three iphoto_libraries stored in a external disk PASSPORT (one for each trip imovie Im making -Ive managed this way the libraries so to not confuse the trips) while the actual files are in OTHER external disk LACIE. And everything was fine: imovie find each library, could work with it, or iphoto could edit the files.
But one day everything crashed at the same time: i opened iphoto to find 3 different scenarios:
1) iphoto_library GREECE was there, but not the albums i prepared. no events. when double click in any of them: "Volume not found"
2) iphoto_library ITALY was there, and the albums i prepared too, but empty.
in both cases I can only see the photos in 'photos' because 'events' shows some events with photo preview and some with no preview, just some kind of preset clipart palm tree, but if i enter the event, photos are there but again: when double click in any item: "Volume not found"
3) iphoto_library ISRAEL was there, the albums too, when double click in any of them: all OK
The 3 libraries was managed the same way. Meaning: Ive imported photos to iphoto from external disk LACIE in a iphotolibrary stored in another external disk PASSPORT. Also: I don't have unchecked the option "copy to file" or something like that. photos where moved, not copied. Also i have all the movie_libraries in the PASSPORT as well. What happened??
Solution? Nothing yet. Ive moved now all the photo folders from LACIE together in PASSPORT with the iphotolibraries but problem persist:
HOW CAN I TELL THE LIBRARIES WHERE TO LOOK FOR THE VOLUMES NOW?
"Volumes" are the original files aren't them?
Please help. this is so annoying to try and find in the forum, to tricky to explain
I have a Macbook pro retina Yosemite 10.10.1 / iphoto 9.6 (910-29)/ iMovie 10.0.6
THANK YOU
Vicky

The 3 libraries was managed the same way. Meaning: Ive imported photos to iphoto from external disk LACIE in a iphotolibrary stored in another external disk PASSPORT.
This is not clear, especially when you say
I don't have unchecked the option "copy to file" or something like that. photos where moved, not copied.
Especially as the message you're getting is typical of a library where the ' option "copy to file" or something like that' is unchecked.
So it's a simple question:
Are you these Managed or Referenced Libraries?
A Managed Library, is the default setting, and iPhoto copies files into the iPhoto Library when Importing. The files are then stored in the Library package
A Referenced Library is when iPhoto is NOT copying the files into the iPhoto Library when importing because you made a change at iPhoto -> Preferences -> Advanced. (You unchecked the option to copy files into the Library on import) The files are then stored where ever you put them and not in the Library package. In this scenario you are responsible for the File Management.

How can i tell what computers are authorized with my itunes account?

My iTunes app tells me that I have 5 computers currently authorized with my account. How can I tell which ones they are??? I've checked all of my old desktops and laptops to deauthorize them but they indicate that they were never authorized. Confusing. Why go to the trouble managing how many are authorized if you don't provide a means to list them??? I realize that I can deauthorize them all (the only choice!) but, in doing so and reauthorizing the ones I need, does this mean that I lose the ability to access previously purchased music on them?? I must say that, for the ease of use of the Apple apps, I expected more. Thanks:-) !

You cannot. You can see the number of authorised machines.
Go to itunes Store, Select Account from Quick Links on the right.
If you already have 5 authorised but can't remember which the machines are you have the option of once every 90 days to deauthorize all comuters and then individually reauthorising the ones you want.
On each machine in iTunes Click Store > Authorise this computer

How can you tell if a pic hasnt been tagged by iPhoto, and do you then...

How can you tell if a pic hasnt been tagged by iPhoto, and do you then do you then have to draw "missing box" around them
What I mean is tagged a few faces, imported some more pics, checked a few and they dont show as named faces, but are faces that are in my Faces source list (ie identified and named)
So do I then have to draw a box around known faces to me, and name them again (I think iPhoto will pop up as Im typing the names I already have)
It just means that even when i import and it doesnt name, I may have lots of pics that are of faces but not tagged and so not in my faces source list
please help
cheers
ps when are Apple going to upload the Getting Started manuals for iLife 09? its been a while since released now, ad they give a bit more insight than the video tutorials alone

No-one? It'll be nice to know how many pics of faces that arent yet tagged
cheers

How can I tell which apps were purchased on my account?

I did search for answers but couldn't find one that fit.
I have an iPhone and so does our son.
Early on my son purchased apps on my account and downloaded them on HIS iphone. Eventually, I got him his own iPhone account and so he has also purchsed apps on his own account and downloaded them on his phone.
When we open iTunes and connect his phone, there is a list of apps that are on his phone.
QUESTION
How can we tell which apps were purchased on HIS iTunes acct and which were purchased on MY iTunes acct?
I don't want to DO anything with the apps, I just want to know one from another.
Thanks in advance!!

List of authorized computers - https://discussions.apple.com/thread/4090165 - there isn't one.

How can I tell if my Logic 7 is academic

Similar Messages

Maybe you are looking for