How can i use multi group view criteria in jdeveloper10g?

Hi.
i'm using jdeveloper10g.1.3.50,i want add multi group viewcriteria,but can't found ViewCriteriaItem.
eg.select x from x WHERE ( (( (a = 1) ) OR ( (a = 2) ))
AND ( (b =1) or (b = 2)))
how can i use multi group view criteria in jdeveloper10g?

Hi,
Did you try with viewcriteriarow.setConjunction?
http://download.oracle.com/docs/cd/B13597_05/web.904/b10391/oracle/jbo/ViewCriteriaRow.html
-Arun

Similar Messages

  • How can i use multi threading in labview?

    i want to run a Digital storage oscilloscope and an energ ratio meter simultaneously using labview. i am using GPIB interfacing and windows XP. how can i do this using multi threading. Bot the instruments shd run and give data at the same time.

    You can't do this - at least not with a single GPIB board. It has nothing to do with threading or LabVIEW. There can only be one talker at a time over the bus. Depending on the instruments, you could probably set them up to take measurements simultaneously but you have to sequentially poll them to get the data.

  • How can I use Firefox to view a pdf in a local file? On the web pdf's open in Acrobat but in a local file (file:///C:/T10/drafts/adc3/adc3r04.pdf) Firefox displays raw text instead of launching Acrobat

    I am configured to open pdf's in Acrobat instead of Firefox. This works great on the web. I have a local mirror of a website on my local disk as well as a network disk. When I use my html file to attempt to open the pdf on the local disk (file:///C:/T10/drafts/adc3/adc3r04.pdf) it opens as text in Firefox - appears to be ASCII view of the binary contents of the pdf. When I use my html file on my network disk (http://tucgsa.ibm.com/~kdbutt/T10/drafts/adc3/adc3r04.pdf) everything works as it should.

    You can set the pdfjs.disabled pref to true on the <b>about:config</b> page to disable the build-in PDF viewer and use the Adobe Reader instead.
    *http://kb.mozillazine.org/about:config
    See also:
    *https://support.mozilla.org/kb/view-pdf-files-firefox-without-downloading-them
    *https://support.mozilla.org/kb/change-firefox-behavior-when-open-file

  • How can I use Ipad to view and delete photos from SD card without importing?

    Importantly I would like to view the photos from the SD card in full screen (vs. just a thumbnail) before deciding whether to delete.
    It seem's that with the camera connection kit you can only view them as thumbnails before importing. 
    Any other apps or hardware I could consider?
    Basically I would like to use the Ipad as my travel photo editing tool - specifically I want to be able to delete unwanted photos from my SD card without having to actually import them into the Ipad (but would like to be able to benefit from quality of ipad screen to actually review the photos before deleting).
    Thanks in advance for any tips you can share .....

    You must import if you want the iPad to have a file to display on the screen. 

  • How can i use multi-windows technology in JAVA

    I am developing a java application with JBuilder4, and now i want to make a multi-window application,which can be created dynamically, also the window can contain the button and line drawing i need.
    Please reply in detail because of my first learning java, thanks.

    You can try JInternalFrame, here is the tutorial:
    http://java.sun.com/docs/books/tutorial/uiswing/components/internalframe.html
    Good Luck!

  • How can l use my face view to open or unlock my iPad mini , rather than using passcodes?

    Pl help how to use your face to unlock your iPad mini ?

    You don't.
    Facial recognition is not supported.
    My understanding is it does not work very well.
    http://www.androidpolice.com/2012/08/03/android-jelly-beans-face-unlock-liveness -check-circumvented-with-simple-photo-editing/
    http://www.dailymail.co.uk/sciencetech/article-2522605/Unlock-phone-FACE-Hidden- software-lets-Android-owners-use-head-PIN-people-similar-looks-able-hack-it.html

  • How can I use "Free Selection" in Dunning?

    Hi,
    I am trying to generate the Dunning notice for only Customers that have the Dunning Area Code as 01. For that I am using the 'Free Selection". I have selected the Customer master and then the dunning area and didn't checked the Exclude box and then in  "Values" I have mentioned the Dunning Area Code as 01. But, System is not picking it up so what shall I do. Also, I have some questions in mind:
    1) Why there are two sections of 'Values" field?
    2) What is the process or steps to 'Exclude' the data?
    3) How can I use Dunning groups?
    Please Help.
    Thanks in advance...
    Regards
    Nitin

    Thanks done...
    Regards
    Nitin

  • How can I force a group of checkboxes using imported PDF forms

    how can I force a group of checkboxes when using imported PDF forms,
    My checkboxes are single fields rather than a group, the form is design using indesign?

    The PDF file format doesn't support grouping check-boxes into a multi-choice field. Because of that, FormsCentral just represents them as check boxes.
    Randy

  • How can I use sysnonym to hide two different views?

    hi,
    My question is how can I use 2 different users to login and they point to different views. However, in the program level, the view name always stand for "Test_View".
    I try to meet the requirements and do the followings:
    Step 1: In user A account, it creates two different views and also grant select to User B and User C respectively.
    Step 2: Login User B and create public synonym called "Test_View".
    Step 3: Login User C and create public synonym called "Test_View".
    I encounter the problem in Step 3 which is public synonym called "Test_View" is already exist. So, anyone can tell me once login and it will depend on which view you can see on program level.
    Thanks
    Amy

    As 399811 told you, you have to create private synonyms.
    "CREATE SYNONYM ...." instead of "CREATE PUBLIC SYNONYM ...."
    the private synonym has to created in each user.
    Joel Pérez

  • How can I use the NI PXI-6508 with Lab View 7? what are the first steps to get started??How can I use the channels with lab view 7????

    I have a 8 slot PXI system with 2 NI PXI 6508 and 1 DMM 4070 in it. I want to get started with programming the digital I/O cards (6508)! How can I use this cards with LabView 7?what is the best way to get started, or where can I get examples showing how to use the several channels?
    Thanks!
    Philipp

    Philipp,
    The best way to get started is to decide if you want to use traditional NI-DAQ or NI-DAQmx. Recently we released NI-DAQ 7.1 which provides NI-DAQmx support for the PXI-6508. In my opinion, NI-DAQmx is more efficient and much easier to use.
    To get started with examples, simply launch LabVIEW and go to Help>>Find Examples. Then expand Hardware Input and Output>>DAQmx and select the appropriate digital group for your application. This should help get you started.
    Please repost if you need addition assistance. Good luck with your application!

  • How can I use MS Access in Lab View

    how can I use MS Access in Lab View
    Its urgent

    There are a couple of routes you can take to communicate with MS Access in LabVIEW. The preferred method is our Database Connectivity Toolset. This allows you to use VIs to communicate with your database. Here is a link to the product for more information.
    http://sine.ni.com/apps/we/nioc.vp?cid=6429〈=US
    Your other choice would be to use ActiveX. I believe there are a couple of examples on our web site using it. Overall you will probably spend a lot more time taking this route.
    Matt Kisler
    Applications Engineer
    National Instruments

  • How can i use %OperatorId in Normal View

    Sample code
    SELECT oprid
    , version
    , emplid
    FROM psoprdefn
    WHERE oprid=%OperatorId
    Greeting, i would like to design a view, where every login user only can see a list of "version" and "emplid" based on their operator id
    But when i put it into a grid, it list out all rows without filtering on operator id
    May i know how can i use view filtering based on %operatorId?
    Thanks

    If you want a static, compiled view that exists in the database, then take a look at: [http://jjmpsj.blogspot.com/2006/09/peoplesoft-on-oracle-whoami.html|http://jjmpsj.blogspot.com/2006/09/peoplesoft-on-oracle-whoami.html]. This shows how to parse the operator ID from the CLIENT_INFO.

  • How can I use Notes in Yosemite on my Mac Book Pro?  I used Notes on Lion but cannot view Notes on Yosemite?

    How can I use Notes in Yosemite on my Mac Book Pro?  I used Notes on Lion but cannot view Notes on Yosemite?  Many thanks, Rick

    Hello rick0809,
    Thank you for visiting Apple Support Communities.
    Are you getting an error message when trying to use Notes?
    Notes Help: Write and share notes
    (Applications > Notes)
    Regards,
    Nubz

  • How can i use capacity reservation group

    I have a set of slow moving SKU which i want to plan in a specific week every month , I know i can use PPC calendars for that but how can i use capacity reservation group in SCM 7.0 to achive this through wave heuristic
    Please advise
    Prasanna NBaware

    Hi Ambrish,
    PPDS capacity reservation functionality available from version  SCM 5.1 onwards. for your requirement you can reserve the capacity  at resource level  for product.
    To archive this requirement, you need to do
    u2022Create Planning Object Structure (POS) with the required characteristics (Product & Location mandatory)
    u2022Create a planning area assigning the planning object structure
    u2022Create Characteristics Value Combination (CVC) in the POS
    u2022Maintain Capacity Reservation Group (resource)
    u2022In Product Master > Demand Tab> assign the consumption group
    Result: .     Planned order gets created for the demand based on the allocated quantity for the particular period
    please let me know if you have any further question
    bye
    Dhaiva

  • How can i use my LAN Blu-ray player and tv to view screens on my macbookpro

    how can i use my LAN Blu-ray player and tv to view screens on my macbookpro

    in short - no.

Maybe you are looking for

  • What is new in 2004s BEx ?

    Hello team, Can any explain me  the following .. What is new in 2004s BEx query designer ?? Major differences between old BEx and 2004s BEx. What is report designer and why is it used ? ...... Also  material links if possible ... Thanx in Advance ...

  • Ai read in while loop

    I am acquiring data from a DAQ e series card. i intialized the daq by using AI config out side while loop . i used AI start and AI read in while loop . iam acquiring data from 5 channels. the buffer size ia 1000 and so is the scan rate in AI start.I

  • E66 - set calendar alarm date and time

    Hi, in previous phone - E60, a was able to set both date&time for calendar alarm. In E66 I can only set value from limited list - 0-30 min, 1-8, 12 hours, 1-2 days, one week. But for older events, which I've moved from e60, two fields are displayed w

  • Calling Sub screen

    Hi all,       Iam getting a problem in calling a sub screen. Iam getting error as below: <b>"." or "ID .....FIELD..." expected after "SUBSCREEN".</b> Please go through this code and suggest me *& Module pool       Y_MP_SUB_03 PROGRAM  Y_MP_SUB_03. ta

  • Keyboard Lag in Safari

    Ever since upgrading to OS X 10.8 and Safari 6, I have had issues with (sometimes severe) keyboard lag in Safari; I have not had this issue in other applications. I have used other browsers (Chrome & Firefox) and not had this issue. It happens in any