How can labview communicat​e with barcode scanner of USB interface

I have no idea that USB barcode scanner is within USBTMC or not
and there is no information available from the BCR supplier about the communication.
Is there anyone give me suggestions?

All that you need to read the scanner is a string control - just like you were entering the code from the keyboard. Could not get any simpler.
Attachments:
bar code read.png ‏8 KB

Similar Messages

  • How can I Communicat​e With Mitsubishi plc Q series

    hey, i want to communicate with mitsubishi plc q series. Do i want to use any driver for this, or i can use VISA? what is the format to communicate with that.. pls help

    Do you get any error code/message back? Sounds like the Java wrappers that you made for the C dll's need to be recompiled? If the application runs in a weird way using the bus monitor.exe (\NI-CAN) would help.

  • How can I communicat​e with my PCMCIA-CAN​/2 card using Java?

    I need to write a Java program to send messages via CAN. The program I used with the Win NT driver of the PCMCIA-CAN/2 card worked. But I have to use Win 2000 now and the new driver nican V 1.6 doesn't work (can't send messages via CAN from my Java program). Thanks in anticipation.

    Do you get any error code/message back? Sounds like the Java wrappers that you made for the C dll's need to be recompiled? If the application runs in a weird way using the bus monitor.exe (\NI-CAN) would help.

  • How can I control media with ipad on xtreme usb hard drive

    Trying to use usb hard drive off extreme via ipad and iphone as a media server to go on my boat. My aim is to have the express with hard drive to have all my movies and music on it and use ipad, powerbook and iphone to control this through apple tv to my 42 inch LCD tv.
    I am pulling my hair out here. Have purchase new Xtreme and plugged in a usb hard drive and think I have set it up properly as I can see and mount the hard drive on my powerbook and play videos etc via wifi (also conected to the internet) . Also when I have  the xtreme and drive mounted on my mac I can access and play the media on the xrpess server on ipad via app called quick explorer.
    Problem is that it seems to be picking up the xpress usb drive via the powerbook as when I shut down my powerbook I can see the usb drive but it keeps on deniying me the permission even though the passwords are correct.
    Does anyone know if there is a correct way of setting this up to work or if there is an app or does apple have a way for their standard players to pickup the usb drive and control the media via iphone or ipad.
    VERY FRUSTRATING
    TIM

    Trying to use usb hard drive off extreme via ipad and iphone as a media server to go on my boat. My aim is to have the express with hard drive to have all my movies and music on it and use ipad, powerbook and iphone to control this through apple tv to my 42 inch LCD tv.
    I am pulling my hair out here. Have purchase new Xtreme and plugged in a usb hard drive and think I have set it up properly as I can see and mount the hard drive on my powerbook and play videos etc via wifi (also conected to the internet) . Also when I have  the xtreme and drive mounted on my mac I can access and play the media on the xrpess server on ipad via app called quick explorer.
    Problem is that it seems to be picking up the xpress usb drive via the powerbook as when I shut down my powerbook I can see the usb drive but it keeps on deniying me the permission even though the passwords are correct.
    Does anyone know if there is a correct way of setting this up to work or if there is an app or does apple have a way for their standard players to pickup the usb drive and control the media via iphone or ipad.
    VERY FRUSTRATING
    TIM

  • How can I communicate with other applications from my Java application?

    Hello,
    I need help about how can i communicate with other application(say textpad.exe/wordpad.exe/MS word.exe) from my Java program.
    More precisely, I need to know how i can get the current position of the cursor whether it is in any .txt/.doc files, then I may write some text in my java application and click a button and then my program will append the line(string) in that position of the file which is running under another appliction(Notepade.exe/MSword.exe).
    Please provide me some help.

    I may be wrong (and anyone, please correct me if so), but Java may not be the best tool for something such as this. I envision that you'd have to make some OS calls such as calls to the user32.dll, and while this can be done through the JNI, you'd still have to have a C or C++ program doing the dirty work.

  • Hi..I really don't understand how can labview can be a server, can you explain and give me some examples with steps on how to make the labview as a server? Please......

    nn
    Solved!
    Go to Solution.

    erm ok i will explain...
    actually..i know that labview can be a client or server. when the labview be a client, it can access other enable activeX application such as excel or word. i manage to do that a little such as to open excel file and save it at another location by using activeX functions or using the report generation toolkit. yes, i already know and understand the flow or concept of how the labview can be a client. But by using others activeX application especially excel, how can we make the labview be a server? i just need a very easy example and few steps for me to understand how can labview be a server or how excel can control the labview properties?
    really desperate to increase new knowledge.....:-)
    thank you very much for helping me....

  • How can i create messenger with java tv API on STB

    deal all.
    how can i create messenger with java tv API on STB.
    how can Xlets communicate each other?
    how?
    i am interested in xlet communications with java tv.
    is it impossible or not?
    help all..

    You can create a messenger-style application using JavaTV fairly easily. JavaTV supports standard java.net, and so any IP-based connection is pretty easy to do. The hard part of the application will be text input, but people have been using cellphone keypads to send SMS messages for long enough that they're familiar with doing this. This doesn't work well for long messages, where you really need a decent keyboard, but for short SMS-type messages it's acceptable.
    The biggest problem that you need to work around is the return channel. Many receivers only have a dial-up connection, ties up the phone line and potentially costs people money if they don't get free local calls. Always-on return channels (e.g. ADSL or cable modem) are still pretty uncommon, so it's something that you nee to think about. Of course, if you do have an always-on connection then this problem just goes away.
    This is really one of those cases that's technically do-able, but the infrastructure may not be there to give users a good experience.
    Steve.

  • How can I count time with labview7?

    Hi
    How can I count time with labview 7 and NI-DAQmx like I did with labview 6.1 and "count time-easy.vi" (count event or Time.vi).
    I have a 6025E and labview 7.0
    Thanks

    I am not sure what you want to do or why..
    ... but here goes (some suggestions)
    If you want to count the time between two events, you have a choice, you may use the Tick Count. Inisitalize it first by getting a timestamp and then do a difference within a loop. The difference will give you the time elapsed in ms.
    You can also use the Get Date/Time String or Get Date / Time in seconds and once again take a snapshot when a first even occurs and another snapshot at the next even (at a point where you want to measure elasped time). This method is particularly useful if you want to timestamp an event.
    If I didn't answer your question, can you elaborate what you mean by "How can I count time".
    Best of luck..
    JLV

  • How can I communicate between two simulated software

    Hallo,
    I have confusion regarding this topic "How can I communicate between two simulated software".
    1: PC with CAN simulation
    2:  PC with AFDX Simulation
    Now i have to communicated these two pc with each other.
    How can i communicated? which module from ni is best for it.
    thanks in advance
    BR

    I recommend looking at the Simple Messaging Reference Library that NI has released.  Use the TCP/IP version of it.
    FYI, TCP/IP is a communication protocol that is used to communicate between two computers.  It is what the internet uses.  So you just need a network switch or router between your computers and you can talk to each other with their IP address.
    There are only two ways to tell somebody thanks: Kudos and Marked Solutions
    Unofficial Forum Rules and Guidelines

  • How can form communicate through RS232 (serial) link?

    How can form communicate through RS232 (serial) link?
    What I have to use/install/setup/copy?
    Thanks

    You can also create a dll library and use the procedures in this library with the Forms ORA_FFI package. See the Forms online help.

  • My iTunes library is missing since upgrade Lion 7.2.  I have it all backed up so that's not the issue. How can I reinstall it with all my hundreds of playlists intact or do I have to recreate each one upon reinstalling the backup copy? Thank you for help

    Almost my iTunes library is missing since upgrade Lion 7.2. (the last 2.5 weeks worth of added music has transferred post-upgrade, none of whcih was bought from iTunes)
    I have it all backed up so that's not the issue. How can I reinstall it with all my hundreds of playlists intact or do I have to recreate each playlist upon reinstalling the backup copy? This would save a HUGE amount of time and efforts. Thank you for your help!

    hi Limnos,
    I do not mean the entire ITunes folder but, rather, the contents of the ITunes folder prior to September 29th.  (90% of the media is missing, along with all playlists)  The media that remains says it was added on 9/29 although I know most of it was added many months or even years earlier. There are no playlists listed at all, before or after 9/29.  (I know for certain that I added non-iTunes purchased songs on 10/6 although I had not created playlists for them)
    I have my iTunes folder backed up on both an external drive as well as Time Machine.
    I run iTunes off of an ITunes folder on my computer rather than from the external, if that's what you mean about how I have it set up. 
    Is it OK to drag the entire iTunes folder from the external drive onto my laptop's drive and see if that fixes it?
    Thank you for your help!
    Deb

  • How can I start anew with Photos and clear the (minimal) stuff it has uploaded

    I've about had it up to here with this new Photos scheme. I reorganised my Aperture libraries on both my iMac and MBA in preparation for this, delayed turning Photos on for a couple of days until I thought everything was ready based upon the limited advice that was out there, and then got stuck in an endless loop of "uploading" and "preparing" every time I opened Photos. There are 19,975 images in my Aperture library on the iMac. I was stuck at Uploading at anywhere between that number and 19,000 with no progress after hours of waiting. I tried all the tricks mentioned here including re booting, restarting the app, repairing/rebuilding the database, killing the "cloudd" process, etc.today Today when I restarted Photos, it now said I had 23,775 images to upload- 4000
    more than I have-and of course it got stuck there, like it has for the last week.
    I copied the previous Aperture library (pre Photos migration)back to my iMac and opened it in Aperture. Thankfully, all the photos I had taken on my iPhone this week during this Photos clusterphuck transition were in the Aperture Stream so I didn't lose any of those. I'm willing to give this whole thing one more shot. So  i need some advice. How can I start anew with Photos and clear the (minimal) stuff it has uploaded (about 6000 of 19,000 images in the last 7 days) ? If I simply delete the Photos.photolibrary file will that do the trick and lt me start a new fresh library using?
    <Re-Titled By Host>

    How can I start anew with Photos and clear the (minimal) stuff it has uploaded (about 6000 of 19,000 images in the last 7 days) ? If I simply delete the Photos.photolibrary file will that do the trick and lt me start a new fresh library using?
    It is hard to say from your post, why the migration did not succeed in your case.
    by "stuck on upload" do you mean, you opened the Aperture library in Photos, and Photos converted it to a Photo Library, and then the upload to iCloud Photo Library did hang?  Or did already the upgrade to the Photo Library fail?
    If you want the Aperture library to upload to iCloud Photo Library, it needs to be on a disk formatted MacOS Extended (Journaled) and the original image files must not be referenced. Referenced originals will not upload.
    Also, the upload may hang, if you do not have enough free iCloud storage, orr if one of the videos or photos in your library is in an unsupported format or corrupted.
    To start over, try to repair and rebuild the Aperture library before opening it in Photos. Try all Aperture Library First Aid options - starting with repairing the permissions.  (Repairing and Rebuilding Your Aperture Library: Aperture 3 User Manual)
    If I simply delete the Photos.photolibrary file will that do the trick and lt me start a new fresh library using?
    You will have to delete the photos that are already in icloud too; otherwise you are risking duplicates.
    Can you launch Photos at all?  If yes, delete all photos in Photos and empty the Recently Deleted album. Wait for the deletion to sync to iCloud. Then delete the Photos.photolibrary.

  • I cant remember my password to logon to my mac, how can i change it with out needing the old one?

    i cant remember my password to logon to my mac, how can i change it with out needing the old one?

    http://support.apple.com/kb/HT1274

  • How can I copy songs with metadata (added in iTunes) from my PC to my new iMac?

    I have iTunes 12.0.1 on my Windows PC. I'm about to get a new iMac (hooray!) and I'm beginning the process of transferring everything on my PC to my Mac. I've got all the documents, pictures, files, etc. covered, but now I have to make a copy of all of my music.
    Most of the music in my iTunes library is not bought through the iTunes Store (I download most of my songs from the Internet). Then, after saving the downloaded song to my computer, I go into iTunes on my computer and add the song. I also add metadata like artist, album, genre, album artwork, etc. to the song in iTunes. What concerns me is that only the songs in iTunes have this metadata: the original downloaded files I saved onto my computer don't have any metadata.
    I really don't want to have to go through the long and tedious process of adding artist/album names, genre, etc. to every single song in my iTunes library on my new iMac. How can I copy songs with metadata (added in iTunes) from my PC to my new iMac?
    Thank you so much for any help!

    Hello! I'd like to learn more about Home Sharing. To do this, would both my PC (which I hope to get rid of) and my new iMac need to be plugged in?
    Also, after Home Sharing with the old PC is initiated, I understand that all my songs would appear on my iMac. Is there a way to copy all of these (with album artwork, name, artist, etc.) directly to the iMac's hard drive and then disconnect home sharing so I can get rid of my PC?
    Thank you!

  • I bought an iPad and an iTunes card, I want to buy an application from the Apps store but it only gives me the option of credit card.  How can I buy Pages with my iTunes card to my iPad? thank you

    I bought an iPad and an iTunes card, I want to buy an application from the Apps store but it only gives me the option of credit card.  How can I buy Pages with my iTunes card to my iPad? thank you

    Have you redeemed your iTunes card to an account associated with an Apple ID?
    Once you have your iPad associated with an Apple ID AND you have an account with a credit card associated with the same Apple ID AND you have some 'store credit' (from redeeming your iTunes card) then purchases use the store credit before they charge the credit card, so you should be ok!
    Personally, I use 'store credit' as a way to monitor whether or not there have been any 'unauthorised' purchases because as soon as the store credit is zero, the security code from the credit card is needed for further purchases!  It does mean that I have sometimes to top up store credit before making a purchase, but 'better safe than sorry'! 

Maybe you are looking for