How can Teststand have Switch Executive dynamically change a route.
I have created routes in Switch Executive and when I try to connect these routes thru Teststand via Action Properties under the Switching Tab. I get an error saying:
Details:A reserved for routing channel required for connecting this route is already in use by another route.(Error = -29031) [Error Code: -17500, Operation Failed.]
I am trying to connect two different routes by the following syntax in the "Routes to Connect" section:
"Route1 & Route2"
It seems that in Switch Executive Route1 and Route2 are both using the same reserved for routing paths. For example:
Route1: [C0->MatrixA/r1->C2]
Route2: [C1->MatrixA/r1->C5]
So my question is then...How can Teststand make Switch Executive change the route path? I have r0, r1, r2, and r3 set as reserved for routing. Thanks for your help.
Thanks for your help.
For situation 1:
When I use this method Switch Executive dynamically chooses a route but its always the same route. What I need to do is have a set of pins that use only one route and another set of pins that uses a different set of routes. You can think of it as c1 is one lead of a multimeter and c2 is the other lead. I need to be able to connect c1 on any other column besides c2 and also c2 to be able to connect to any other pin besides c1. Since in Teststand I need to connect c1 and c2 simultaneously as a step I get an error because both are trying to use the same route.
Also when I change the route from:
channelA->matrix/r0->channelB
to: channelA->matrix/r1->channelB,
then when I save and close Switch Executive and I reopen it the channels automatically routes itself back to channelA->matrix/r0->channelB.
Is there any way that I can save these routes to my configured route?
Similar Messages
-
How can i have '&' in EXECUTE IMMEDIATE statement?
I have PL/SQL procedure, where i will be inserting data to a table. Data which i am inserting is having a '&' value in it. If i use the below statement for insert then sqlplus is prompting for the value '&' like a substitution value while compile this procedure.
EXECUTE IMMEDIATE 'INSERT INTO TABLE_TEST VALUES (:1,:2)' USING 'root/direct/&text', SYSDATE;If i replace the '&' by assigning this value to VARCHAR field then it is working properly. But when i populate an xml from this table using DBMS.XMLGEN, then the value '&' is not entity escaped in the XML which is normally replaced with '&' in XML.
Please help.Vel wrote:
i can't go by both ways because i am using '&' in various files to get some values. Also in this package i am using the '&' to get another substitution variable. Is there any other workaround possible?I prefer not to mess with server-side SQL and PL/SQL code to fix, or work around, a problem on the client-side. Not a very sensible thing IMO.
In such a case as you've described, I would set the substitution character to a character that I'm not using in server-side code. I have done this a couple of times in the past for db create and installation scripts. Oracle uses the same approach for their Apex installation scripts.
I think Oracle uses the +#+ character for their Apex install scripts. E.g.
set define '#'I think I used the tilde (char <i>~</i>) at a stage as substitution char as it is very seldom used in PL/SQL and SQL code.
The bottom line is that you will need to change your code. Set define off and on where needed to ensure substitution only happens where needed. Set the substitution char to a different char and update your substitution variables. Or hack your server-side code (as suggested above) and use the char() function instead. -
I have recently switched to icloud. Lately I have not been able to receive emails. A msg comes up asking me to reenter my password. Perhaps I am entering the wrong password and have forgotten what it is. How can I find my old password or change it and get my .mac account email working again?
If it was setup using your iPhone and your Apple ID then as far as the iCloud team will be able to find out, you set it up. Passwords cannot be retrieved.
Change all passwords on accounts associated with your iPhone. -
How can I have 2 variables for one output?
I need it so that the spacebar does one thing on one frame and another thing on the other.
I have solved this but now I need to know how can I have it so 2 variables = 1 output.
This is my code at the moment:
while (menu)
if (changecharacter)
gotoAndStop(2);
menu = falseMy whole code is:
var menu:Boolean = true
stop();
var leftPressed:Boolean = false;
var rightPressed:Boolean = false;
var changecharacter:Boolean = false;
Block.addEventListener(Event.ENTER_FRAME, fl_MoveInDirectionOfKey);
stage.addEventListener(KeyboardEvent.KEY_DOWN, fl_SetKeyPressed);
stage.addEventListener(KeyboardEvent.KEY_UP, fl_UnsetKeyPressed);
Block.gotoAndStop(1)
function fl_MoveInDirectionOfKey(event:Event)
if (leftPressed)
Block.x -= 3;
if (rightPressed)
Block.x += 3;
if (changecharacter)
Block.gotoAndStop(2);
while (menu)
if (changecharacter)
gotoAndStop(2);
menu = false
function fl_SetKeyPressed(event:KeyboardEvent):void
switch (event.keyCode)
case Keyboard.LEFT:
leftPressed = true;
break;
case Keyboard.RIGHT:
rightPressed = true;
break;
case Keyboard.SPACE:
changecharacter = true;
break;
function fl_UnsetKeyPressed(event:KeyboardEvent):void
switch (event.keyCode)
case Keyboard.LEFT:
leftPressed = false;
break;
case Keyboard.RIGHT:
rightPressed = false;
break;
case Keyboard.SPACE:
changecharacter = false;
break; -
I am uploading receipts using the PURCHASE_ORDER_RECEIPT EIP. When I upload serialized assets each one is processed as a separate receipt (receiver_id). How can I have these all aggregated on the same receipt?
Is there a parameter I should be using in the XML or is there a setting in Peoplesoft that will accomplish this?
Jimsundy.liu wrote:
Unfortunately however, even with the TCP tweaks enabled, I still only get a little over 1 Gb/s through the two aggregated Gig ports. It seems as though the aggregation is only using one port, though MRTG graphs of the two switch ports do in fact show that they are both being utilized equally, essentially splitting the 1 Gb/s speed between
the two ports.
Problem with the server? switch? Aggregation software? All the above? At any rate, I seem to be missing something.. Any help regarding this issue would be greatly appreciated!If you're only running a single stream, that's all you'll see. Teaming/aggregating doesn't make one stream go faster.
If you ran two streams simultaneously, then you should see a difference between a single 1G interface and an aggregate of two 1G interfaces.
Darren -
Hi
I have about 1000 contacts on my iPhone 4 after syncing with iCloud there are only about 120 contacts on iCloud How can I have the same info on both the iCloud and my iPhoneOn the iPhone tap Settings > iCloud
Switch Contacts off then back on then reset the device.
Hold the On/Off Sleep/Wake button and the Home button down at the same time for at least ten seconds, until the Apple logo appears. -
How can i run a executable right after a rman job has run?
How can i run a executable right after a rman job has run?
I have a rman job that execute every night. The backup is local.
I want to have a duplicate of the backup on another machine.
I want the executable to sync the directory to execute right after the rman backup.
How can i do this using the job scheduler?
Normaly, i would configure rman to run the backup on both location. But im having trouble with rman regarding this:ORA-600 [2103] on RMAN Backup to NFS mounted file systemHi,
If the rman job is in fact a Scheduler jobs (appears in the dba_scheduler_jobs view) then you can create a second event-based job that runs after the rman job (and set the raise_events attribute for the rman job).
Instructions are here
Create Event based job
Hope this helps,
Ravi. -
How can u have lock rotation off and mute feature off at the same time
How can u have lock rotation off and mute feature off at the same time
Maybe this will help. The link at the bottom is the same one that was posted above.
System sounds can be muted and controlled two different ways. The screen lock rotation can be controlled in the same manner as well.
Settings>General>Use Side Switch to: Mute System sounds. If this option is selected, the switch on the side of the iPad above the volume rocker will mute system sounds.
If you choose Lock Screen Rotation, then the switch locks the screen. If the screen is locked, you will see a lock icon in the upper right corner next to the battery indicator gauge.
If you have the side switch set to lock screen rotation then the system sound control is in the task bar. Double tap the home button and in the task bar at the bottom, swipe all the way to the right. The speaker icon is all the way to the left. Tap on it and system sounds will return.
If you have the side switch set to mute system sounds, then the screen lock rotation can be accessed via the task bar in the same manner as described above.
This support article from Apple explains how the side switch works.
http://support.apple.com/kb/HT4085 -
How can I have my servlet accept 100 concurrent client requests?
My servlet extends HttpServlet so it is multithreaded. Then I have written a java
client which starts 100 concurrent threads that try to contact the servlet.
There are always lots of threads which are refused by the Weblogic Server 6.0.
They get a 'Connection refused' exception. Sometimes there are 50 refused connections,
sometimes there are 0 refused connections (not very often), sometimes there are
80 refused connections (usually).
I have checked the 'Servlet' documentation and the 'J2EE Design Considerations
for Weblogic Server' which recommends not to exceede the execute thread count
number of 15. I have not changed that value, I do not even know if it still exists
in Weblogic 6.0 as the document refers to the 5.0 version.
Does anybody know how to solve this problem? How can I have the client requests
waiting rather than being refused? Of course the main goal is to serve all the
client requests, not to refuse.
This is the code that the client thread uses to contact the servlet:
URL url = new URL("http://localhost:7001/examplesWebApp/myServlet");
URLConnection conn = url.openConnection();
conn.setDoInput(true);
conn.setDoOutput(true);
DataOutputStream os = new DataOutputStream(conn.getOutputStream());
os.writeBytes()
os.writeBytes()
Thanks for your time,
David
The key is
KKEY_LOCALMACHINE\SYSTEM\CurrentControlSet\Services\TCPIP\Parameters
There you may need add a value "MaxUserPort" as REG_DWORD (5000 is default), also
change "TcpTimedWaitDelay" to small number (30 is minimum). You may have trouble
to find them. Just add them.
You can also use Microsoft Web Application Stress Tool to test your Weblogic applications.
As a free test tool, it is really powerful, although not so flexible.
I guess you write your own test tool with java.net.URLConnection. I am not sure
about the power of this class. In my case, I wrote my stress test tools with Java
Socket. I can test application on Weblogic 6 with 1000 threads with my own tool
and Microsoft tool, depending on memory and CPU of the machines I use. I run my
tests on both Windows 2000 professional and Solaris.
Check your CPU and memory usage with task manager.
On the other hand, you should check log message on Weblogic 6. Try to turn on
HTTP debug by add the following in your config.xml in tag <Server>.
<ServerDebug DebugHttp="true" DebugURLResolution="true"
JDBCConn="true" JDBCSQL="true" ListenThreadDebug="true" Name="myserver"/>
"David Ruana" <[email protected]> wrote:
>
>Xiang, I really appreciate your help. I changed my Weblogic server configuration
>from the console but I still experience the same problems.
>
>I start my 100 threads, and from about the 20th onward all them get the
>'Connection
>refused' exception in the URLConnection::getOutputStream() function,
>always after
>a successful URLConnection::openConnetion().
>
>My system is Windows 2000 Professional (Spanish version). I tried to
>check the
>open client socket descriptor limit but I was not able to find the TCPIP/MAXUSERPORT
>in the registry. Do you know how is this entry called in Windows 2000?
>
>At this point I am not sure whether my problems are related to the Weblogic
>server
>or to the operative system. I will keep trying... I would appreciate
>any other
>suggestion.
>
>Thank you very much.
>
>
>
>"Xiang Rao" <[email protected]> wrote:
>>
>>It is better to use Weblogic 6 console to configure Weblogic server.
>>In the console,
>>there is tab Servers->myServer->Congiguration->Tuning, you can find
>execute
>>length
>>and backlog.
>>
>>If you use Windows as test client, note Windows have a 5000 open client
>>socket
>>descriptors limit. You need change Windows Registry (TCPIP/MAXUSERPORT)
>>to change
>>this parameter.
>>
>>On the other hand, during test, you should monitor your test via Weblogic
>>console
>>(myServer->Monitoring->Performance), here you can see the change of
>wait
>>queue.
>>If the queue keeps increaing, you are in trouble.
>>
>>Since you know how to use MBean, try to write customized (servlet, for
>>example)
>>to collect the following data: opened socket number, open socket number,
>>opened
>>session number and open session number. The two "open" numbers will
>give
>>you some
>>clue. Also record your CPU and memory usage.
>>
>>BTW, what is the output you get from your test in terms of number of
>>requests
>>per second, response time and number of bytes downloaded/uplodaed per
>>second?
>>Are your test client and Weblogic running on the same machine?
>>
>>
>>
>>"David Ruana" <[email protected]> wrote:
>>>
>>>By the way, this is a piece of the config.xml file where you can see
>>>my Server
>>>configuration. It is the configuration which is installed in the examplesServer
>>>in the free evaluation of Weblogic 6.0. I only modified the AcceptBacklog
>>>value,
>>>and added the ThreadPoolSize="15" line which was missing (I copied
>from
>>>the petstoreServer).
>>>
>>> <Server AcceptBacklog="1000" AdministrationPort="0" ClusterWeight="1"
>>> ConsoleInputEnabled="false" DGCIdlePeriodsUntilTimeout="2"
>>> DefaultProtocol="t3" DefaultSecureProtocol="t3s"
>>> HttpdEnabled="true" JavaCompiler="C:\bea\jdk130/bin/javac"
>>> ListenPort="7001" Name="examplesServer" NativeIOEnabled="true"
>>> ThreadPoolSize="15"
>>> SocketReaderTimeoutMaxMillis="10"
>>> TransactionLogFilePrefix="config/examples/logs/"
>>> TunnelingClientPingSecs="45" TunnelingClientTimeoutSecs="40"
>>>XMLRegistry="examplesXMLRegistry">
>>> <ServerDebug Name="examplesServer"/>
>>> <WebServer DefaultWebApp="DefaultWebApp_examplesServer"
>>> LogFileName="./config/examples/logs/access.log"
>>> LoggingEnabled="true" Name="examplesServer"/>
>>> <Log FileName="./config/examples/logs/weblogic.log" Name="examplesServer"/>
>>> <KernelDebug Name="examplesServer"/>
>>> <SSL Enabled="true" ListenPort="7002" Name="examplesServer"
>>> PeerValidationEnforced="0"
>>> ServerCertificateChainFileName="./config/examples/ca.pem"
>>> ServerCertificateFileName="./config/examples/democert.pem"
>>> ServerKeyFileName="./config/examples/demokey.pem" TrustedCAFileName="./config/examples/ca.pem"/>
>>> </Server>
>>>
>>>
>>>
>>>
>>>
>>>"Xiang Rao" <[email protected]> wrote:
>>>>
>>>>You only need to change Weblogic HTTP configuration. Give the server
>>>>a big socket
>>>>Backlog number. Since you test with 100 threads, you can think 1000
>>>to
>>>>5000, i.e.,
>>>>1000 to 5000 requests will be in queue before got served. Aslo, you
>>>might
>>>>need
>>>>to change your OS TCP/IP settings (both test clients and servers),
>>such
>>>>as maximum
>>>>number of sockets and timeout value(so closed sockets will release
>>socket
>>>>descriptors
>>>>immediately).
>>>>
>>>>On the other hand, the number of executive threads can be much larger
>>>>than 15
>>>>(50-200 is a normal number), depending on the features of your application.
>>>>You
>>>>can try your stress test tools to find a reasonable number by analyzing
>>>>the relationships
>>>>among (throughtput, response time, number of executive threads, etc).
>>>>
>>>>
>>>>"David Ruana" <[email protected]> wrote:
>>>>>
>>>>>My servlet extends HttpServlet so it is multithreaded. Then I have
>>>written
>>>>>a java
>>>>>client which starts 100 concurrent threads that try to contact the
>>>servlet.
>>>>>
>>>>>There are always lots of threads which are refused by the Weblogic
>>>Server
>>>>>6.0.
>>>>>They get a 'Connection refused' exception. Sometimes there are 50
>>refused
>>>>>connections,
>>>>>sometimes there are 0 refused connections (not very often), sometimes
>>>>>there are
>>>>>80 refused connections (usually).
>>>>>
>>>>>I have checked the 'Servlet' documentation and the 'J2EE Design Considerations
>>>>>for Weblogic Server' which recommends not to exceede the execute
>thread
>>>>>count
>>>>>number of 15. I have not changed that value, I do not even know if
>>>it
>>>>>still exists
>>>>>in Weblogic 6.0 as the document refers to the 5.0 version.
>>>>>
>>>>>Does anybody know how to solve this problem? How can I have the client
>>>>>requests
>>>>>waiting rather than being refused? Of course the main goal is to
>serve
>>>>>all the
>>>>>client requests, not to refuse.
>>>>>
>>>>>This is the code that the client thread uses to contact the servlet:
>>>>>
>>>>>URL url = new URL("http://localhost:7001/examplesWebApp/myServlet");
>>>>>URLConnection conn = url.openConnection();
>>>>>conn.setDoInput(true);
>>>>>conn.setDoOutput(true);
>>>>>
>>>>>DataOutputStream os = new DataOutputStream(conn.getOutputStream());
>>>>>os.writeBytes()
>>>>>os.writeBytes()
>>>>>...
>>>>>
>>>>>Thanks for your time,
>>>>>David
>>>>>
>>>>
>>>
>>
>
-
Just upgrade to 33.1.1, terrible! new tab position not configurable, no response for clicking a link, not going to the website by click "enter", "space" keyboard can not be the page down anymore, always die....
how can I have the old version?
Thanks!Just to clarify, let's say you have tab 1 Google results and tab 2 something else. When you Ctrl+click a link in tab 1, it opens between tab 1 and tab 2 instead of at the end? Here's how you switch that:
(1) In a new tab, type or paste '''about:config''' in the address bar and press Enter. Click the button promising to be careful.
(2) In the search box above the list, type or paste '''tabs''' and pause while the list is filtered
(3) Double-click the '''browser.tabs.insertRelatedAfterCurrent''' preference to switch it from true to false.
You can switch back to an earlier tab and test. Success? -
How can i have a multi task approach while working on my iPad? Shfting windows is heavy and time consuming!
Also shifting windows while surfing is not easy, when used to multiple screens and easy shifting from one web page to another.
ThksNot entirely sure what you mean, but this has some info about multi-tasking . iOS 5, which will be available to download on October 12th, adds multi-tasking gestures (from http://www.apple.com/ios/features.html#more) :
Using four or five fingers, swipe up to reveal the multitasking bar, pinch to return to the Home screen, and swipe left or right to switch between apps.
Also Safari will get tabbed browsing in iOS 5, making it easier to switch between pages/tabs. -
How can you run an executable from AS2 code without using fscommand() or a projector?
Just using some short .asc files made out of Notepad for some back-end server stuff, but without using fscommand() or projectors, how can you call an executable? There's a C++ program that I want to run from more-or-less the same directory as the .asc files, which handles some logging, and I need to be able to pass it arguments when telling it to run.
Please note that I have Googled this with no useful results and that I'm on an assignment that necessitates this question. Also I'm open to the possibility that it can't be done.
Thanks!The swf is on a different server and using AS3. The little bit of AS2 back-end stuff is on a few different servers that the swf is hooking up to for streaming video and audio. The executable would be on the AS2 servers.
-
How can I have multiple users on iTunes (in order to connect to a shared office iPad)?
How can I have multiple users on iTunes (in order to connect to a shared office iPad)? Currently each of us has our own iTunes account, so I've made an "all office" Apple ID. However, I can't seem to get two different accounts (my personal and the office) to work on my machine. Even when I login as "the office", my personal library is still showing. Additionally, when I try to setup with a first-time use in iTunes, I get an error that I don't meet the minimum age requirement - no matter what birthdate I enter!
The library exists regardless of which user is logged in.
The only way around that is to create different user accounts on the computer.
There is no way to have 20 unique iTunes users access a shared iTunes under a single login on the computer. -
In Outlook my PDF attachments appear as whole documents and not just the PDF icon. How can I have attachments included as PDF icons and not the documents?
For your own viewing, you can of course control-click on the attachment and select "View as Icon".
For others' viewing, it depends upon their email reader. To ensure that attachments are not displayed expicitly you can put them all in a zip file (via control click and "Compress") then attaching them, or you can use third party stuff like Attachment Tamer.
charlie -
On my mac when i click on pages, a new document doesn't open instantly but a window with my files open and then have to click on the left bottom < new document> in order to open one. How can i have directly a new document when i click on pages icon
How to open an existing Pages document?
Click Pages icon in the Dock to launch Pages.
When Pages is open, click File menu in the Pages menu bar.
Select “Open”.
When the select document dialog box opens up, highlight/select the document and click “Open”
at the bottom right corner of the dialog box.
s
https://support.apple.com/kb/PH15304?locale=en_US
Maybe you are looking for
-
Multiple address books on the same computer: How to
Hi! I'll get in the near future my wife's iPhone 3G (unless she keeps it and take her 3GS instead) - but want want to be 100% sure we can have separate address books on the same computer. The question is simple: how do we go about that? Thanks in adv
-
Moving a Folder from explorer to Bridge
When I move a local folder from within explorer to Bridge, the checkinhandler is triggered. However, during that operation when I call identity.getParentId(), this returns null. I think this comes from the fact that I'me adding a new classification.
-
Cannot connect to the OLAP source - when Scheduling WebI Report
Hi, I am confused by seeing the above mentioned error on random days.... Scenario - WebI report scheduled daily: Some days the report works fine and other days it is not processing correctly but gives me this error message "Cannot connect to the OLA
-
Some calender appointments show one hour too early after sync
when I sync my calendar from ical to my iphone, some appointments (that are repeated weekly) are shown on time and some one hours to early. This occurs with all apointments dated after november 1st (switch from summerclock to winterclock in Europe).
-
Hi, im holding blackberry z10 from UAE, im not able to see option to update to the new software, please help!!