How can use a script to separate data into separate sheets?

For example sake, I have three columns: Food Eaten (lbs), Date, and Pet (Fido, Penny, Whiskers). I'd like to tease the data apart such that the data for the first two columns for Penny, Fido, and Whiskers all appear on different sheets.
Thanks in advance
Solved!
Go to Solution.

Hi FCW,
I created a DataPlugin to read in your Excel data file-- if you happen to have DIAdem 2010 (11.2) or later you'll be able to use it. Otherwise just load the file however you were loading it before so that your 4 data channels are the only ones in the Data Portal, then run the "DataFileWhisperer.VBS" script in DIAdem SCRIPT.
Brad Turpin
DIAdem Product Support Engineer
National Instruments
Attachments:
FuelCellWhisperer.zip ‏7 KB

Similar Messages

I have manually inputted data into a blank spreadsheet and would like to use a form to enter data into that sheet !!! How do I do that please

I have manually inputted data into a blank spreadsheet and would like to use a form to enter data into that sheet !!! How do I do that please

Leigh,
After creating your table, Tap the Tab marked "+" and select "Form" - you will be asked which table to use. (You should get into the habit of naming your tables - if the table name isn't visible, select the table and tap the Styles (Brush) Menu > Table > Turn ON table Name, then double tap on the Table to edit it.)
Select the table you wish to to fill with a form and you will see a new form based on the header data.
The form will allow you to add one row at a time and when you get to the last row, there is an option at the bottom of the form to add a new row using the "+" button. At the top of the form is the row header which you can rename by double tapping.
You can also rename the form on the Tab by double tapping on the name.
Try it out.

How can I pass a Presentation Variable (Date) into a prompt

Hello
How can I pass a Presentation Variable (date) into a prompt? I seem to be able to do this successfully for a non-date value but have had no luck with a Date variable.
Here's a simplistic version of what I'm trying to do:
1. I have a Presentation Variable called startDate which is a Date that defaults to this SQL - SELECT "Reporting Dates"."Measure Date" FROM Trading WHERE "Reporting Dates"."Date Name" = 'Current'.
2. I now want to pass this variable into a prompt with SQL like this: SELECT "Position Date"."Position Date" FROM Trading where "Position Date"."Position Date" = date'@{startDate}{2009-04-24}'
I get this error: Datetime value @{startDate}{2009-04-24} from @{startDate}{2009-04-24} does not match the specified format.
Now I can use the exact same syntax in a filter. For example, a simple Answers request where I pick Position Date with a filter saying "Position Date"."Position Date" = date'@{startDate}{2009-04-24}' works fine.
What am I doing wrong?
Thanks!

Can you provide more information please?
1. What is the format of the first date prompt, is it YYYY-MM-DD or?
2. Which data type is Position Date."Position Date" in the physical layer, date or date time?
3. What is the column formula in the first prompt?
4. The first prompt is set to drop-down or?
5. If you are using this SQL Results in the second prompt:
SELECT "Position Date"."Position Date" FROM Trading where "Position Date"."Position Date" = date '@{startDate}{2009-04-24}'
then @{startDate} must be in YYYY-MM-DD format to work properly, otherwise (for example):
datetime value 01/01/2000 from 01/01/2000 does not match the specified format.
This doesn't work for example:
SELECT Times.time_id FROM "Normal model" where Times.time_id =date '01/01/2000'
Regards
Goran
http://108obiee.blogspot.com

How can i get pr header note data into po while creating a po using pr no

Hi all,
Can any one tell me how can i get the PR header note's data in PO when i am creating a PO using that PR.
and what is the name of table in which the header note's data is copied.
Thanks
Edited by: Saurabh.Shrivastava on Jan 17, 2012 3:54 PM

Hi,
Unfortunately I have to tell you that the described behaviour is not
an Error but SAP Standard behaviour.
Please see note 448814 question 7.
In SAP Standard it is not foreseen to take over the header text of a
PREQ to a PO !
You can try to use BADI ME_REQ_HEADER_TEXT .
I have found a document which gives coding for Purchase Requisition Header Long Text using Badi - ME_PROCESS_REQ_CUST:
http://wiki.sdn.sap.com/wiki/display/ABAP/PurchaseReq.HeaderLongTextusingBadi-ME_PROCESS_REQ_CUST
I hope it can help you!
Best Regards,
Arminda Jack

How can I write the name of data into Excel?

Now, I write T1 T2 T3 and so on into an excel file and each is in one column. How can I insert the data name such as " T1 T2 T3" on the top row by programming?
I am using "write to spreadsheet file. vi" now and wire the data with "build array".

How can you creat the "red box" (linked to append report text.vi) with name as Pressure, temperature, operator ?
Actually, I use much simpler way. Could you please have a look at it?
I attach an vi file to express my meaning.
附件:
save try.vi ‏40 KB

How to use record type for inserting data into a table

I've read through the web the following tip:
"When working with a large number of columns, using variables of type RECORD is a better approach. With this approach, you do not have to list anything in the INSERT statement, because you are inserting a variable into the table that is defined as a row from the same table."
I usually define a variable as
r_mytable     mytable%ROWTYPE;
and inside my procedure I'll set the fields I need as
r_mytable.field1 := 1;
r_mytable.field3 := 7;
and then I perform the insert as
insert into mytable
(field1,
field3)
values
(r_mytable.field1,
r_mytable.field3);
According to the tip I've copied above, how can I use the TYPE RECORD of pl/sql for achieving the same result but perhaps in a smarter way?
Thanks in advance!

Hi,
Are you looking for this?
SQL> create table table1 (id number, descr varchar2(30));
Table created
SQL>
SQL> DECLARE
2   my_rec table1%rowtype;
3 BEGIN
4   my_rec.id := 1;
5   my_rec.descr := 'TEST';
6   insert into table1 values my_rec;
7 END;
8 /
PL/SQL procedure successfully completed
SQL> select * from table1;
   ID DESCR
    1 TESTWorks with UPDATE too :
SQL> DECLARE
2   my_rec table1%rowtype;
3 BEGIN
4   my_rec.id := 2;
5   my_rec.descr := 'TEST2';
6   update table1 set row = my_rec where id = 1;
7 END;
8 /
PL/SQL procedure successfully completed
SQL> select * from table1;
   ID DESCR
    2 TEST2

I need to set up 9 IPhones and 4 IPads to be used as data collection devices. How can I do that without setting up 13 separate ITunes accounts?

I need to set up 9 IPhones and 4 IPads to be used as data collection devices. How can I do that without setting up 13 separate ITunes accounts?

You can use the same account to set up as many devices as you like.
You might also find there are tools to help with a roll out.
http://www.apple.com/support/iphone/enterprise/
tt2

I cannot log in my game center using a same nickname after i updated my phone to ios 7. All my game data i was playing for months is lost. Seems when i try to put my nickname its already in used. How can i recover all my game data back?

All my game data i was playing for months was lost. Seems when i trie to put my nickname its already in used. So i need to put a new nickname then it create a whole new acc for me. All my previous data was lost. How can i recover my all my data or use my old nickname? Pls help

kerryp123
Yes, it is the same with me. I know a friend how upgraded to iso7 and lost all of his game center data. He tried singning in and re singning in but no change. Plus on to of all of this, apple is like have me and him to re-validate our itunes acount. Somthing weried is going on. So verified my itunes acount and it shows under settings that I am signed in, but when I go to the app store on my iPhone and try downloading or even updating a app, it says "can not conect to itunes store" after singing in! AND I'M NOT SURE I AM GOING TO UPGRADE TO ISO7 YET UNTILL THEY FIX THIS BUG!!!! HELP!

I have installed the latest version of iOS in my ipad but forgot to backup the content, what should i do!!! I don't want my media and other data erased, how can i find back all the data in my ipad? I haven't restore ipad yet, so any others way can be use?

I have installed the latest version of iOS in my ipad but forgot to backup the content, what should i do!!! I don't want my media and other data erased, how can i find back all the data in my ipad? I haven't restore ipad yet, so any others way can be use? Now my ipad is in recovery mode.

Once you are in Recovery Mode, it's too late to do any backup. I am afraid you are going to lose your data.

How can use the active x excel to change the assigned data/number in my VI?

I have an assigned data in my vi using build array and insert into array. i can change the data in excel,
but i can't change the data in array, How can I connect/communicate/control the data in aray using active x excel.
(i know this is complicated that's why i'm trying to get helped)
(please lend me a simple example)
Thank You very much.

The one I pointed you to before was a bad example. Try the one here. The example returns the cell value as a string but that's easy enough to change. You can also modify it to return a range of cells to create a LabVIEW array. You can also search NI Dev Zone for other examples by going here and you can also search this forum for Excel examples.

How to Flip the Sign using Calculation script for historical data

I am currently using Essbase 9.3.1. Its required to flip sign for a specific set of accounts for that i am currently using UDA's to flip the sign.
But now i need to flip the sign for the historical data too. Is there any possible way to flip the sign using calculation scripts for historical data. Kindly let me know your suggestions.
Many thanks in Advance...
Edited by: [email protected] on Jul 30, 2009 9:37 PM
Edited by: [email protected] on Jul 30, 2009 10:58 PM
Edited by: [email protected] on Jul 30, 2009 11:01 PM

Of course there is. This is the kind of calc script that only gets run once, so make usre you test it well before doing it on production and make a backup of production before doing it.
It would be something like
Fix(time frame, accounts to be flipped, level zero other dimensions)
actual = actual * -1;
EndFix
Cal dim dimensions
Note, I chose actual, but you could do it for any dimension that has a single or only a couple of members. What ever dimension you choose to do the calculation on, it can't be included in the fix statement

How can we make the ms-word data as read-only using java code?

How can we make the ms-word data as read-only using java code?

MVSK wrote:
By using java code i opened a file in ms-word. But the data i want to display as read-only. that means should not change it.I don't think you can do that. Display pdf documents instead.

I just purchased a Thunderbolt Display for use with Photoshop work. How can I set up to show/work in separate programs on each screen?

I just purchased a Thunderbolt Display as an additional screen for Photoshop work. Following set up instructions appears to allow only mirroring of the screens. How can I set up to show/work in separate programs on each screen?

Yes, each blue rectangle is a screen. You can create different geometries, to suit your needs. For example, you can even make this kind of thing... :
Or this:
I don't know why you would want to do that, but you can!

How to use Power Query to load data from a single source into multiple tables

Hi all,
I have a requirement to load my data into three different data models using Power Query. Is that possible?
My source is a SharePoint survey list, with similar questions like:
1) Course lecturer - John Doe
1a) The course was useful (rate 1 to 5)
1b) The lecturer displayed good knowledge of topic (rate 1 to 5)
2) Course Lecturer - Mary Brown
2a) The course was useful (rate 1 to 5)
2b) The lecturer displayed good knowledge of topic (rate 1 to 5)
I would like to split the data into separate data models (one for John Doe; another for Mary Brown), so that I can compare the different lecturers. Other than running separate surveys for each of them, I thought of using Power Query to transform the data.
Is it possible?
Thanks.
Regards
GM

Yes, this is possible.
Start with a single query that returns you the data for all lecturers.
Right-click on the "all lecturers" query in the queries pane, and choose Reference, once for each lecturer. This will create a query for each lecturer.
Open the query for each lecturer and filter the data so that only that lecturer's results are visible.
Click "Close & Load To..." for each lecturer's query to load the data into the data model. This will create a data model table for each lecturer.
If your question is more about how to transform such a survey list into a table that can be easily filtered, please provide an example of how the list shows up in Power Query.
Ehren

How can i test script

how can i test script. here problem is i developed script in 100 client, but data is available in 120 client. now i want to test the script..? is it possible through client copy?
advance thanks
Regards,
Raj
Edited by: raj on Jun 10, 2009 4:23 PM

hi Sneha and rashmi,
for scc1 is it required to release transporst request? because i have only one request, that should only to use to move devlopment to quality server?
help to be need ful
thanks
raj
Edited by: raj on Jun 10, 2009 5:15 PM

How can use a script to separate data into separate sheets?

Similar Messages

Maybe you are looking for