How can use the select statement to retriev the data from a where conditi

Hi,
SELECT KUNNR
           NAME1
           STRAS
           ORT01
           PSTLZ
           LAND1
     FROM KNA1
     INTO TABLE IT_KNA1
     FOR ALL ENTRIES IN IT_LIKP
     WHERE KUNNR = IT_LIKP-KUNNR AND
           KUNNR = IT_LIKP-KUNAG.
Here I am getting records only when WHERE KUNNR = IT_LIKP-KUNNR AND
                                        KUNNR = IT_LIKP-KUNAG.
But I need the records for both when KUNNR = IT_LIKP-KUNNR
                             And     KUNNR = IT_LIKP-KUNAG.
Can you suggest me the best logic.
Thanks.
Kumar .

Hi Suresh,
Use the following code.
Loop at it_likp.
if it_likp-kunnr <> ' '.
select name1 stras ort01 pstlz land1 into corresponing field of table it_kna1
         from kna1
         where kunnr = IT_LIKP-KUNNR.
elseif it_likp-kunag <> ' '.
select name1 stras ort01 pstlz land1 into corresponing field of table it_kna1
         from kna1
         where kunnr = IT_LIKP-KUNAG.
elseif it_likp-kunnr <> ' ' and it_likp-kunag <> ' '.
select name1 stras ort01 pstlz land1 into corresponing field of table it_kna1
         from kna1
         where kunnr = IT_LIKP-KUNNR
         AND   KUNAR = IT_LIKP-KUNAG.
endif.
endloop.
hOPE THIS WILL WORK FINE.
Rewards pts if it is usefull.
Regards
Srimanta

Similar Messages

How can collect the data from laptop sound card and serial port at the same time?

I'm working on a project, I need to collect the data from laptop sound card, and also from serial port at the same time.
The attachments are my VIs for sound card and serial port communication, I'm wondering that can I combine these two VIs together? Or can I run these two VI at the same time?
Thank you!
Attachments:
AC_Radar_Receive.vi ‏46 KB
RadarAudioPlug.vi ‏774 KB

A smarter way is just to put all your code in the same VI.
Two parallel loops if rates are different.
Attachments:
RadarAudioPlug.vi ‏450 KB

How can print the data from notepad into the web application.

Hi,
I am Buntty, I want to read the data from the notepad and print into text area of web application, I have written the code to invoke the file and store data in temporary buffer, then I want to Print that data, but while printing the data 1st line replaces when the 2nd line prints, java code is below.
BufferedReader bin=new BufferedReader(new FileReader("mydata.txt"));
while((credit_number=bin.readLine())!=null)
selenium.type("inputString", credit_number);
Please help me to print all the lines in the text area of web application.
Any method to print the all the data in the notepad at a time into the text area on web application.
Thanks
Buntty
Edited by: Buntty on Nov 15, 2008 4:24 PM
Edited by: Buntty on Nov 15, 2008 4:37 PM

Try this:
BufferedReader bin=new BufferedReader(new FileReader("mydata.txt"));
String tempString = "";
while((credit_number=bin.readLine())!=null)
tempString = tempString + credit_number;
selenium.type("inputString", tempString); Hope this helps.
All the best

How can pass the data from Command line to Applet?

Hi,
I am writing a chat application by using sockets. For that purpose I need to pass the parameter data from command line to Applets. Is there any method to receive command line args data in Applets? If so please tell me.

Passing command line arguments to an applet is not possible, but for the same you can try using param tags, within your applet tag.
For eg:
<applet.......>
<param name="xyz" value="abcdef">
</applet>
Within the applet's any method like init call <getParameter("xyz");>
will return u the value.
[email protected]

How to use the data from 1 report in another report?

Hello All
I have a data model like the following:
Physical and logical join the same as below:
Dim1 <--- Fact 1 ---> Dim2 <-- Fact 2 --> Dim3
Now I have 1 report (Report A) which is out of Dim1 <--- Fact 1 ---> Dim2
and another report (Report B) which is out of Dim2 <-- Fact 2 --> Dim3
Now the measure from report A needs to be divided by the measure from Report B.
What's the best way to achieve this?
Thanks in advance

Hello
Thank you for the reply. Actually, this approach you mentioned may not work. I forgot to mention, that although the data model was simple, but for each report, the filtering conditions were quite complicated.
So in other words, after all of the complex filtering, aggregation, I was finally able to get the correct number from report 1, which is summed and displayed, and it's only 1 row. Report 2's values are summed the filtered differently, but it returns multiple values.
So now, I wish I can just take what I can visually see from report 1 in the dashboard and divide it with each row of report 2 in the dashboard. Is there a way to do this kind of thing in 11G?
Thanks

How can use the icons from keyboard?

I want the little characters on my keyboard how go by getting this?

Settings> general> keyboard> keyboards> add new key board> select emoji.

How to read the data from Excel file and Store in XML file using java

Hi All,
I got a problem with Excel file.
My problem is how to read the data from Excel file and Store in XML file using java excel api.
For getting the data from Excel file what are all the steps i need to follow to get the correct result.
Any body can send me the code (with java code ,Excel sheet) to this mail id : [email protected]
Thanks & Regards,
Sreenu,
[email protected],
india,

If you want someone to do your work, please have the courtesy to provide payment.
http://www.rentacoder.com

HOW TO PASS THE DATA FROM SELECTION SCREEN TO STANDARD TRANSACTION?

HI,
HOW TO PASS THE DATA FROM SELECTION SCREEN TO STANDARD TRANSACTION?
thanks,
samba.

By selection screen, what do you mean? There is no selection screen in WDA as there was in classic dynpro. Do you mean you are using the Select-Options reusable component? Are you wanting to call a standard transaction via ITS - SAPGUI for HTML? Please provide more details to your question.

How to load the data from excel file into table in oracle using UTL_FI

How to load the data from excel file into table in oracle
and from table to excel file
using UTL_FILE package
Please give me some example

This is something i tried in oracle apex
http://avdeo.com/2008/05/21/uploading-excel-sheet-using-oracle-application-express-apex/
Regards,
CKLP

HT4236 How can get the pictures from my iPod to my iPad without a computer?

How can get the pictures from my iPod to my ipad without a computer?

Then there is absolutely no way to get the pictures from the iPod to the iPad unless you import them to your computer and then import them inor iTunes and sync them to the iPad.
Where did the pictures come from? Which iPod version do you have?

How to insert the data from XML to a table

Hi,
I'm using Oracle 10g Express Edition
I need help in How to insert the data from XML file into the table.
Below is the example i'm working on..
I have create ridb user with below mentioned privileges:
Account Status Locked Unlocked
Default Tablespace: USERS
Temporary Tablespace: TEMP
User Privileges :
Roles:
CONNECT
RESOURCE
Direct Grant System Privileges:
CREATE DATABASE LINK
CREATE MATERIALIZED VIEW
CREATE PROCEDURE
CREATE PUBLIC SYNONYM
CREATE ROLE
CREATE SEQUENCE
CREATE SYNONYM
CREATE TABLE
CREATE TRIGGER
CREATE TYPE
CREATE VIEW
& table is created TRIALZIPCODES below mentioned is the DDL:
CREATE TABLE TRIALZIPCODES
STATE_ABBR VARCHAR2(20) NOT NULL
, ZIP_CODE NUMBER(10, 0) NOT NULL
, ZIP_CODE_EXT VARCHAR2(20)
Below is the XML FILE: which is stored in C:\OracleProject Folder
File name: trial.xml
<?xml version="1.0" ?>
<metadata>
- <Zipcodes>
- <mappings Record="4">
<STATE_ABBREVIATION>CA</STATE_ABBREVIATION>
<ZIPCODE>94301</ZIPCODE>
</mappings>
- <mappings Record="5">
<STATE_ABBREVIATION>CO</STATE_ABBREVIATION>
<ZIPCODE>80323</ZIPCODE>
<ZIP_CODE_EXTN>9277</ZIP_CODE_EXTN>
</mappings>
</Zipcodes>
</metadata>
PL/SQL Procedure:which i'm trying to execute from SQLDeveloper
create or replace
PROCEDURE TRIAL AS
BEGIN
DECLARE
-- declare attributes
charString varchar2(80);
finalStr varchar2(4000) := null;
rowsp integer;
v_FileHandle UTL_FILE.FILE_TYPE;
l_context_handle dbms_xmlgen.ctxHandle;
insCtx DBMS_XMLStore.ctxType;
begin
-- DBMS_XMLGEN.setRowTag ( ctx IN ctxHandle, rowTag IN VARCHAR2);
-- DBMS_XMLGEN.setRowSetTag ( ctx IN ctxHandle, rowSetTag IN VARCHAR2);
-- the name of the table as specified in our DTD
DBMS_XMLGEN.SETROWSETTAG(l_context_handle,'zipcodes');
-- the name of the data set as specified in our DTD
DBMS_xmlgen.setRowTag(l_context_handle,'mappings');
-- for getting the output on the screen
dbms_output.enable(1000000);
-- open the XML document in read only mode
v_FileHandle := utl_file.fopen('c:/OracleProject','trial.xml', 'r');
loop
BEGIN
utl_file.get_line(v_FileHandle, charString);
exception
when no_data_found then
utl_file.fclose(v_FileHandle);
exit;
END;
dbms_output.put_line(charString);
if finalStr is not null then
finalStr := finalStr || charString;
else
finalStr := charString;
end if;
end loop;
-- for inserting the XML data into the table
insCtx := DBMS_XMLSTORE.NEWCONTEXT('RIDB.TRIALZIPCODES');
insCtx := DBMS_XMLSTORE.INSERTXML(insCtx, finalStr);
dbms_output.put_line('INSERT DONE '||TO_CHAR(rowsp));
DBMS_XMLStore.closeContext(insCtx);
END;
END TRIAL;
For the first time when i complied i got the errors as :
Procedure RIDB.PROCEDURE1@RIDB
Error(16,14): PLS-00201: identifier 'UTL_FILE' must be declared
Error(16,14): PL/SQL: Item ignored
Error(29,1): PLS-00320: the declaration of the type of this expression is incomplete or malformed
Error(29,1): PL/SQL: Statement ignored
Error(33,1): PL/SQL: Statement ignored
Error(33,19): PLS-00320: the declaration of the type of this expression is incomplete or malformed
Error(36,1): PL/SQL: Statement ignored
Error(36,17): PLS-00320: the declaration of the type of this expression is incomplete or malformed
So i logged in as sys & grant the permission to execute on UTL_FILE to ridb (user):
SQL Statement:
grant execute on utl_file to ridb
So, it got compiled successfully but when i execute it gives me error as:
Source does not have a runnable target.
What does this mean?
So I browse through forum & i got to know that i need to initial the UTL_FILE_DIR ="C:/OracleProject" in init.ora
So can i edit the init.ora with notepad.When i tried to do that it says permission denied
In my system it shows the init.ora file in path C:\oraclexe\app\oracle\product\10.2.0\server\config\scripts
but there is also other file initXETemp in the same path do i need to do the changes in it.
I have tried even editing the SPFILE as mentioned below:
C:\oraclexe\app\oracle\product\10.2.0\server\dbs\SPFILEEXE - I had edit this file using notepad & set the value of UTL_FILE_DIR ="C:/OracleProject". So next time when i restarted i'm unable to log on to the database.
So i had reinstall the software again.
Could you please let me know how to proceed..

hi,
I have created the directory from sys database
CREATE or replace DIRECTORY XML_DIR2 AS 'C:\OracleProject';
& grant read,write access to the user
grant read,write on directory XML_DIR2 to RIDB;
& i had change the tag name in the xml file as shown below:
<?xml version = '1.0'?>
<metadata>
<Zipcodes>
<mappings Record="4">
<STABBRE>CA</STABBRE>
<ZIPCODE>94301</ZIPCODE>
</mappings>
<mappings Record="5">
<STABBRE>CO</STABBRE>
<ZIPCODE>80323</ZIPCODE>
<ZIPCODEEXT>9277</ZIPCODEEXT>
</mappings>
</Zipcodes>
</metadata>
TRIALZIPCODE table as shown below:
CREATE TABLE "RIDB"."TRIALZIPCODE"
(     "STABBRE" VARCHAR2(20 BYTE),
     "ZIPCODE" NUMBER(*,6) NOT NULL ENABLE,
     "ZIPCODEEXT" NUMBER
) PCTFREE 10 PCTUSED 40 INITRANS 1 MAXTRANS 255 NOCOMPRESS LOGGING
STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)
TABLESPACE "USERS" ;
I have tried two methods as shown below:
Procedure 1:
create or replace
PROCEDURE TRIAL_V2 AS
BEGIN
DECLARE
-- declare attributes
charString varchar2(80);
finalStr varchar2(4000) := null;
rowsp integer;
v_FileHandle UTL_FILE.FILE_TYPE;
l_context_handle dbms_xmlgen.ctxHandle;
insCtx DBMS_XMLStore.ctxType;
cnt NUMBER;
xmldoc xmltype := xmltype( bfilename('XML_DIR2','trialxml.xml'), nls_charset_id('AL32UTF8') );
--XML_DIR VARCHAR2(40) := 'C:\\OracleProject';
BEGIN
insCtx := DBMS_XMLStore.newContext('DEV.TRIALZIPCODES');
DBMS_XMLStore.setUpdateColumn(insCtx, 'STABBRE');
DBMS_XMLStore.setUpdateColumn(insCtx, 'ZIPCODE');
DBMS_XMLStore.setUpdatecolumn(insCtx, 'ZIPCODEEXT');
DBMS_XMLStore.setRowTag(insCtx, 'mappings');
cnt := DBMS_XMLStore.insertXML(insCtx, xmldoc);
DBMS_XMLStore.closeContext(insCtx);
END;
Procedure 1 was compiled with out errors but when i execute i got the error as :
Source does not have a runnable target.
Procedure 2_
CREATE OR REPLACE PROCEDURE TRIAL_V3 AS
BEGIN
DECLARE
-- declare attributes
charString varchar2(80);
finalStr varchar2(4000) := null;
rowsp integer;
v_FileHandle UTL_FILE.FILE_TYPE;
l_context_handle dbms_xmlgen.ctxHandle;
insCtx DBMS_XMLStore.ctxType;
cnt NUMBER;
xmldoc xmltype := xmltype( bfilename('XML_DIR2','trialxml.xml'), nls_charset_id('AL32UTF8') );
--XML_DIR VARCHAR2(40) := 'C:\\OracleProject';
BEGIN
INSERT INTO trialzipcode (STABBRE, ZIPCODE, ZIPCODEEXT)
SELECT extractvalue(x.column_value, 'mappings/STABBRE'),
extractvalue(x.column_value, 'mappings/ZIPCODE'),
extractvalue(x.column_value, 'mappings/ZIPCODEEXT')
FROM TABLE(
XMLSequence(
EXTRACT(
xmltype( bfilename('XML_DIR2','trialxml.xml'), nls_charset_id('AL32UTF8') ),
'metadata/Zipcodes/mappings'
) x
END;
END TRIAL_V3;
Procedure 2 was complied without errors but when i execute i got the error as:
Connecting to the database RIDB.
ORA-22288: file or LOB operation FILEOPEN failed
The system cannot find the file specified.
ORA-06512: at "SYS.DBMS_LOB", line 523
ORA-06512: at "SYS.XMLTYPE", line 287
ORA-06512: at "RIDB.TRIAL_V3", line 12
ORA-06512: at line 2
Process exited.
Disconnecting from the database RIDB.
Could you please let me know how to proceed...

How to bring the data from application server to presentation server

hi,
i have one problem,i have written the program which will open the files in the application server when we run the program in the background(sm37),the same data from application server i want to bring into presentation server in the format of (.csv),how to bring the data from application to presentation server can any body help me on this topic.folowing is the code .
*& Report ZPFA_HIER_LOAD
REPORT ZFPA_HIER_LOAD.
*---- Declaration of Oracle connectioN
DATA con_name LIKE dbcon-con_name VALUE 'COMSHARE'.
DATA: MFL1(9),MFL2(5),MFL3(9),MFL4(2),MFL5(8) TYPE c.
DATA : mfilename type string.
data: begin of matab1 occurs 0,
      MFL1(9) TYPE C,
      MFL2(5) TYPE C,
      MFL3(9) TYPE C,
      MFL4(2) TYPE C,
      MFL5(8) TYPE C ,
     end of matab1 .
data: setid(8) type c.
data: begin of source occurs 0,
      setid(8) type c,
      end of source.
*PARAMETERS : p_pfile LIKE filename-FILEEXTERN.
*PARAMETERS : m_bsenty(8). " type c obligatory.
*mfilename = P_PFILE.
EXEC SQL.
SET CONNECTION :con_name
ENDEXEC.
EXEC SQL.
CONNECT TO :con_name
ENDEXEC.
EXEC SQL PERFORMING get_source.
SELECT set_id FROM UNIT_SET INTO
:setid
ORDER BY SET_ID
ENDEXEC.
start-of-selection.
LOOP AT SOURCE.
REFRESH matab1. CLEAR matab1.
EXEC SQL PERFORMING evaluate.
SELECT TO_CHAR(MEM_ID),TRIM(TO_CHAR(MEM_PID)) FROM UNIT_TREE INTO :MFL1,
:MFL5
where set_id = :SOURCE-SETID ORDER BY MEM_ID
ENDEXEC.
if SOURCE-SETID = '80000000'.
   mfilename = '/tmp/aesorg'.
elseif SOURCE-SETID = '80000006'.
   mfilename = '/tmp/Consolidation_Manager'.
elseif SOURCE-SETID = '80000010'.
   mfilename = '/tmp/10org'.
elseif SOURCE-SETID = '80000012'.
   mfilename = '/tmp/20org'.
elseif SOURCE-SETID = '80000018'.
   mfilename = '/tmp/30org'.
elseif SOURCE-SETID = '80000025'.
   mfilename = '/tmp/40org'.
Endif.
mfilename = '/usr/test.dat'.
************************This was i tried***********************
open dataset mfilename for output in text mode encoding default." IN
*TEXT MODE ENCODING DEFAULT.
if sy-subrc <> 0.
exit.
endif.
close dataset mfilename.
CALL FUNCTION 'GUI_DOWNLOAD'
   EXPORTING
     FILENAME         = MFILENAME
     FILETYPE         = 'ASC'
   TABLES
     data_tab         = matab1
   EXCEPTIONS
     file_write_error = 1
     invalid_type     = 2
     no_authority     = 3
     unknown_error    = 4
     OTHERS           = 10.
loop at matab1 .
transfer matab1 to mfilename.
endloop.
clear matab1.
ENDLOOP.
loop at matab1 .
transfer matab1 to mfilename.
endloop.
close dataset mfilename.
     MFL5 = '0'.
   CLEAR MFL5.
FORM evaluate.
if MFL5 = -1.
    MFL5 = ''.
ENDIF.
concatenate MFL1 ','   into MFL1.
concatenate MFL1 ','   into MFL3.
matab1-MFL1 = MFL1.
matab1-MFL2 = 'ZBUE,'.
matab1-MFL3 = MFL3.
matab1-MFL4 = ' ,'.
matab1-MFL5 = MFL5.
append matab1 .
CLEAR MFL1.
CLEAR MFL2.
CLEAR MFL3.
CLEAR MFL4.
CLEAR MFL5.
ENDFORM.
                 "evaluate
*&      Form GET_SOURCE
      text
FORM GET_SOURCE.
source-setid = setid.
append source.
clear source.
ENDFORM.                    "GET_SOURCE

Hi Rammohan,
You cannot use OPEN DATASET to transfer data from application server to presentation server.
You can do the following :
<b>Do 1st point in BACKGROUND</b>
1. Read the data file from application server into an internal table using OPEN DATASET
<b>Do 2nd point in Foreground</b>
2. Once you get the data into an internal table, then use FM GUI_DOWNLOAD to download it on presentation server
You cannot use the above 2 point together in Background because its not possible. Hence you need program it partially in background and partially in foreground.
Best regards,
Prashant

How to pass the data from a input table to RFC data service?

Hi,
I am doing a prototype with VC, I'm wondering how VC pass the data from a table view to a backend data service? For example, I have one RFC in the backend system with a tabel type importing parameter, now I want to pass all the data from an input table view to the RFC, I guess it's possible but I don't know how to do it.
I try to create some events between the input table and data service, but seems there is no a system event can export the whole table to the backend data service.
Thanks for your answer.

Thanks for your answer, I tried the solution 2, I create "Submit" button, and ser the mapping scope to be "All data rows", it only works when I select at least one row, otherwise the data would not be passed.
Another question is I have serveral imported table parameter, for each table I have one "submit" event, I want these tables to be submitted at the same time, but if I click the submit button in one table toolbar, I can only submit the table data which has a submit button clicked, for other tables, the data is not passed, how can I achieve it?
Thanks.

How to delete the data from partition table

Hi all,
Am very new to partition concepts in oracle..
here my question is how to delete the data from partition table.
is the below query will work ?
delete from table1 partition (P_2008_1212)
we have define range partition ...
or help me how to delete the data from partition table.
Thanks
Sree

874823 wrote:
delete from table1 partition (P_2008_1212)This approach is wrong - as Andre pointed, this is not how partition tables should be used.
Oracle supports different structures for data and indexes. A table can be a hash table or index organised table. It can have B+tree index. It can have bitmap indexes. It can be partitioned. Etc.
How the table implements its structure is a physical design consideration.
Application code should only deal with the logical data structure. How that data structure is physically implemented has no bearing on application. Does your application need to know what the indexes are and the names of the indexes,in order to use a table? Obviously not. So why then does your application need to know that the table is partitioned?
When your application code starts referring directly to physical partitions, it needs to know HOW the table is partitioned. It needs to know WHAT partitions to use. It needs to know the names of the partitions. Etc.
And why? All this means is increased complexity in application code as this code now needs to know and understand the physical data structure. This app code is now more complex, has more moving parts, will have more bugs, and will be more complex to maintain.
Oracle can take an app SQL and it can determine (based on the predicates of the SQL), which partitions to use and not use for executing that SQL. All done totally transparently. The app does not need to know that the table is even partitioned.
This is a crucial concept to understand and get right.

How to pass the data from web dynpro to workflow.

hi gurus,
how to pass the data from web dynpro to workflow.
Regards
vijay

Hi
you can use function module
data   ls_input_container TYPE swr_cont.
data   lt_input_container TYPE TABLE OF swr_cont.
CALL FUNCTION 'SAP_WAPI_START_WORKFLOW'
    EXPORTING
      task            = ptask
    IMPORTING
      return_code     = lv_return_code
      new_status      = lv_new_status
    TABLES
      input_container = pinput_container
      message_lines   = lt_message_lines
      message_struct = lt_message_struct.
where you pass the data in imnternal table "pinput_container" as
ls_input_container-element = 'KUNNR'.
ls_input_container-value = ls_skna1-kunnr ."wd_this->lv_kunnr.
APPEND ls_input_container TO lt_input_container .
ls_input_container-element = 'CLUSER'.
ls_input_container-value = lv_cluser.
APPEND ls_input_container TO lt_input_container .
ls_input_container-element = 'BUKRS'.
ls_input_container-value = lv_bukrs. " youe value as per requirement.
APPEND ls_input_container TO lt_input_container .
ls_input_container-element = 'VKORG'.
ls_input_container-value = ls_sknvv-vkorg. " youe value as per requirement
APPEND ls_input_container TO lt_input_container .
ls_input_container-element = 'VTWEG'.
ls_input_container-value = ls_sknvv-vtweg. "youe value as per requirement.
APPEND ls_input_container TO lt_input_container .
ls_input_container-element = 'SPART'.
ls_input_container-value = ls_sknvv-spart. "youe value as per requirement.
APPEND ls_input_container TO lt_input_container .
*Also Forgot to mention where ptask is your workflow ID *
Regards,
Arvind
Edited by: Arvind Patel on May 14, 2010 7:38 AM

How can use the select statement to retriev the data from a where conditi

Similar Messages

Maybe you are looking for