How can we launch the labview screen beyond other screens while running two applications on a same time

Hi all,
I need to run two applications in my system at same time. one of the application is labview. it is running in backside. the dialog boxes which i created in labveiew need to display in fron of all applications.... what should i do to do that.....any suggestions...
thanks in advance
Regards,
Ragu

The easiest thing to do (but can be bad) is to make the LabVIEW window modal. This will make it the front most window at all times, until the program stops executing. As you can imagine if you don't have a way to close the window then you will be forced to kill LabVIEW through the taskmanager.
To make window modal go to VI Properties (by right clicking the VI's icon) go to Window Appearance, click Customize, then under Window Behavior select Modal.
The other more complicated solution is to use Dll calls to bring the window to the front.
Message Edited by Hooovahh on 07-02-2009 08:44 AM
Unofficial Forum Rules and Guidelines - Hooovahh - LabVIEW Overlord
If 10 out of 10 experts in any field say something is bad, you should probably take their opinion seriously.

Similar Messages

How can I remove the lock screen from my iphone5s

how can i remove the lock screen from my iphone5s. Please help.

JModi wrote:
I want to get home screen as soon as I click the top lock screen button.
The "lock screen button" locks the phone. It will not take you back to the home screen. Thus the difference in the nomenclature for the "HOME" button and the "LOCK" button...

I have installed the iAS 9i,but how can I launch the Portal?I can't found it,but I ..

I have installed the iAS 9i,but how can I launch the Portal?I can't found it,but I have selected that component when installing...?

Which version of 9ias have u installed
if it is rel 2 u have to install first 9ias infrastructur and then portal.
portal can be access at http://hostname.port/pls/portal
where hostname and port is where u have installed the portal and the port number where apache listens
good luck
[email protected]

How can I use the LabVIEW Symbol Editor as a Sub-VI?

How can I use the LabVIEW Symbol Editor as a Sub-VI?

mc-hase wrote:
> Thank you for your ansver.
> That means that you see no possibiltiy to use the built in window? (I
> think the built in window is programmed with LabVIEW as well...)
The icon editor at least up to version 7.0 of LabVIEW is not written as
VI but directly implemented inside LabVIEW, which is written in C/C++.
Rolf Kalbermatter
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

How can I eliminate the mesh screen which appears over any image I open in photoshop CS6?

How can I eliminate the mesh screen which appears over any image I open in photoshop CS6?

It depends, but it could either be the Grid or Pixel Grid under View>Show.

HT5934 How can I disable the lock screen option. I do not want to punch in a multi-digit security code every time I need to use the phone

How can I disable the lock screen option? I do not want to punch in a multi-digit security code every time I need to use the phone.

System Preferences - Security & Privacy - unselect the box called Disable automatic login

IPAD HECK DURING CLOSING AN APP. HOW CAN I RESTORE THE HOME SCREEN?

IPAD HECK DURING CLOSING AN APP. HOW CAN I RESTORE THE HOME SCREEN?

To reset the icons on your iPhone home screen to the factory default, follow these steps:
1. Touch Settings -> General -> Reset -> Reset Home Screen Layout
2. Confirm the action by pressing the red "Reset Home Screen" button

HT201493 How can I bypass the password screen every time open the app?

How can I bypass the login screen when I open the app?

Welcome to the Apple Community.
open what app?

How can I display the vendor associated with result of my running total sum

I have a report that lists vendors with their most vecent order dates. I need to set up a rotation so that the vendor with the latest order date is next to be selected. I used the running total summary to pick the latest date. How can I display the vendor associated with result of my running total summary?

If your "latest" order date means the "oldest" order date, why don't you try this:
Go to Report tab -> Record Sort Expert -> Choose your order date in ascending order
This will make your oldest order your first record shown.
You can then create a running total count for each record.
Lastly, in your section expert under conditional suppress X+2 formula, write this:
{#CountRecords}>1
The result will only show the oldest record in your report.
I hope that helps,
Zack H.

I bought a Mountain Lion upgrade for $20 off the Apple site. I have four other Macs all under the same ID. How can I share the new OS with other computers. Or can I?

I bought a Mountain Lion upgrade for $20 off the Apple site. I have four other Macs all under the same ID. How can I share the new OS with other computers. Or can I?

You can share it with other Macs under your control (not your neighbor's). You just need to be logged in under the buying AppleID for updates or to download again.
Use this thread to find a method of copying the ML download into a USB drive to make other installations easier: https://discussions.apple.com/message/16639520#16639520

How can I map the composite_dn name with a composite in run time

Hi All,
I want to craete a report on number of total business and system faults with the help of Information Publisher in OEM 12c Cloud Control. I am fetching data from the table composite_instance_fault present in SOAINFRA schema. Below os my SQL statement:-
select error_category,count(error_category) from prefix_SOAINFRA.composite_instance_fault where composite_dn=??EMIP_BIND_TARGET_GUID?? group by error_category
Now I want to know that how can I map the composite_dn name with a composite in run time. When we fetch data from the repository we used to map target in rumtime by using ??EMIP_BIND_TARGET_GUID?? but here as I am not fetching data from repository, how can I map target in run time.
On executing the above SQL statement its returing an empty table without any data.
Please guide!!
Thanks in Advance!!

Hi,
try something like this.
Mike
Attachments:
Unbenannt 5_LV80.vi ‏12 KB

How can I access the internet on my ipad mini while wifi signal is strong, how can I access the internet on my ipad mini while wifi signal is strong

how can I access the internet on my ipad mini while wifi signal is strong,

Your question isn't clear enough. If it's a strong signal, you're good to go.

How can i copy a dbx executable to other machine to run without installion

How can i copy a dbx executable to other machine to run without installion whole workshop
packet??? how to generate a configuration for dbx alone???
thanks

Hi, thanks for you help.
actually, I have once copied dbx to other machine. certainlly, it needs a license. But when I copied
a license file from the directory /opt/SUNWspro/license-dir/ of machine that installed Workshop
to another machine that i want to run dbx. dbx starts correctly. but when i type
$ dbx ipCentrex
it prints following message:
dbx: warning: cannot find global initialization file: dbxrc
/opt/wacos/./.dbxrc[1]: syntax error
dbx: installation problem, can't find help file: ./SUNW_SPRO_Dbx_help.info
_find_executable: not found
To suppress this message, add the following line to your .dbxrc file:
dbxenv suppress_startup_message 6.2
Reading ipCentrex
dbx: warning: setuid program exec()ed. Reattaching
There might be too many LWP's in this process.
See `help dbxenv' under mt_scalable.
dbx: Cannot open lwpstatus.
dbx: warning: process initialization failed
dbx: warning: can't find file "/opt/wacos/server/feature_server/bin/obj/ipCentre
x/ipcentrex_main.o"
dbx: warning: see `help finding-files'
when it says that has errors in .dbxrc file, I can remove this file. But the critical error is why it says
too mamy LWP's in this process? when I debug it at a machine that installed workshop, this error not occurs.
anyone have answer?

How do I specify the JRE i wish to use to Run an Application.

Hi Everyone;
Please bear with me if you read this before.
I have installed java 1.3.1 and java 1.4.1 in that order.
The JRE used by default is java 1.4.1
How do I specify the JRE I wish to use to Run an Application from a command prompt.
Example:
Java -something org.jboss.Main
help ??
Stephen

I was a lil embarrassed. I told my supervisor that the installation of java overwrites the JRE and that's that.
My supervisor took 10 minutes and went through it and found java.exe in the System32 file.
The java.exe file is found in guess where "C:/WINNT/System32/" folder how nice. C:/WINNT/System32/ is in the path. Not only that it's the first entry in the path. So when I execute java it is not using java.exe any one of the java files that I got from the java website.
So I don't have any control over the version.
Oh well;
That's life. That's 1 for my supervisor.
Stephen

On the iPad Air, how can I get the lock screen to stay on longer like it was with an iPad 2?

Since getting an iPad Air the lock screen does not stay on but for a few seconds after startup, how can I adjust the time of it? It used to stay on with my iPad2.Thanks

I guess I never noticed that the swipe to open doesn't stay on very long. But, I've not found this to be an issue as I usally swipe the moment I have the option to swipe. It's been so long since I had a 2nd generation iPad that I honestly can't remember if it stayed on longer. It's still not a problem for me. There is no setting which will let you keep the swipe to open on longer, so it would reasonable for Apple to say there is nothing wrong with your iPad

How can we launch the labview screen beyond other screens while running two applications on a same time

Similar Messages

Maybe you are looking for