How change saturation value of a image??

I have to change value pixel to pixel??
My image is a PlanarImage and a slider for modificate saturation value.
Each pixel-> convert HSB-> manipulate S value ->> convert to RGB???
Thanks.

Ajay,
I think you are changing more than one variable value at a time...this things generally happen in this case.
Go step by step.....
Press on the pencil button
value filed becomes editable
change the value
and at once press the enter
the ediatble field automatically becomes non editable, and hence retain the changed value.
Pooja

Similar Messages

Preview changes RGB values when resizing images

Since I upgraded to snow leopard, preview increases the Red spectrum when resizing images (png). Is this a bug or do I need to change a setting to preserve the original RGB values?

Figured it out. It seems that when you don't specify the BufferedImage that the operation will write too it changes the type to something it uses for the operation. This still seems like it should be a bug to me, but i got around it by doing this:
BufferedImage tempIMG = new BufferedImage((int)(srcImg.getWidth()*scale),(int)(srcImg.getHeight()*scale),srcImg.getType());
op.filter(srcImg, tempIMG);
return tempIMG.

How do I create a duplicate image inside the same page? Then how do I change the color of that image

how do I create a duplicate image inside the same page? Then how do I change the color of that image from black to red?

Hello there!
Here is one way to create a duplicate image and colorize it. As you can see below, I have one image right now, that I want to duplicate.
My layers panel looks like below.
To duplicate your image, click the downward arrow on the right side of your Layer Panel.
Select Duplicate Layer. This will duplicate the layer that the image is on.
Select "OK" to approve the duplication.
As you can now see in the Layers panel, the image is duplicated. The new layer is now at the top of the Layer panel.
Now to colorize your image, go to Window > Adjustments.
The Adjustments panel will now be opened. Select the Hue and Saturation icon as seen circled in red.
The Hue and Saturation propertied panel will be opened. I selected "Colorize", and adjusted the hue and saturation bar to achieve the level red in my photo.
As you can see below, the image is now red.
Now i want to make sure only ONE of my image layers is red. I moved the Hue and Saturation layer to only be on top of the bottom layer. The image on the top layer now will not be affected by the red.
Select the move tool, so I can now move the image layers so we can see both of them.
With each image layer selected, you can take the move tool and move the images. I moved mine on top of eachother and you can see my red layer (bottom) and the non red layer (top).
I hope that helps. i have also included helpful links.
Please post back with any questions,
Janelle

How to change the default JAD Icon image in JStudio

Dear friends,
I have one dought,how to change the default icon JAD image in jstudio application.Its very important to me.And one find answer please tell .

Dear friends,
I developed one application in jstudio.And need to set an special icon for my application.While i download my application in to mobile. The icon should be displayed in the mobile.To show my application as unique from other applications.But i dont know how to set an icon for my application. If any one find answer please reply as soon as possible.
Thank you

How do I change the value of the Order By field in an MP3 file?

good day Guys,
I'm new here in the forum and I have a question that is "breaking" the order of my songs and my head too ...
How do I change the value of the Order By field in an MP3 file?
for example, in the photo below, the song "The Bad Touch" is coming BEFORE the song "A Little Respect", this happens because of the Name field to Order ...
My "problem" is in the photo below, the "tab" Order, iTunes will not let me erase what is written in the "Sort As" ...
I've been "collecting" several songs over SEVERAL years
I'm currently with more than 1,500 songs on HD and several backups on DVDs and external hard drives and I think, download it again, will be a "little" laborious and boring
I DON'T WANT to be filling the tags of songs (name, singer, CD, year, etc.)
I have used the program Mp3tag to remove the music tags
I've tried to download the song again and go through Mp3tag program as if it were a new song
I've changed the music access permissions, folder and even entire hard drive (my Windows has only one user)
I've tried to catch the song again, from a previous backup
I've tried to create a copy of the file at iTunes own
I've tried to create a new music file in a music recording program
NOTHING of what I did above resolved
-> I'm using Windows 7 64-bit Ultimate
-> I'm using iTunes 12.1.1.4 for 64-bit Windows
-> My iPad is the third generation (a little old, I know) with Wi-Fi and 3G, but it has served me VERY WELL
-> The iPad is updated with iOS 8.1.3 and is not unlocked
I'm sorry for the GIANT post, but well, I think I could explain as much as possible and for my English, too bad, by the way, I'm from Brazil and I'm using Google translator
Hugs and await answers,
Paulo Ricardo

hello turingtest2,
my language is Brazilian Portuguese (there are some little differences between Brazilian Portuguese and the Portuguese of Portugal, but nothing that interferes with the script)
at this time, I'm managing songs manually, I don't know if this will interfere with the execution of a script or command
as I picked up this iPad recently, I still don't understand how to set up the iTunes Music Library and the person who gave me, told me it was easier to put the songs manually
as you said, in my iTunes, 95% of the songs are with ALL the blank fields, including the Name to Sort field, only songs that begin with a/an/the standing with the Name to Sort field filled with name of the song, without the a/the
I do not know what to do...
I want to learn to ride the iTunes Music Library, that my work is less
you know any site that teaches create/manage my iTunes Music Library?
this site/forum may be in English, no problem
thanks for all your help and the help of others who responded to my request

HT200285 I want to change my wallpaper to an image that was available before I upgraded to IOS 8.1.3 - a close-up image of long reedy grasses with hazy light in the background. Greyish hues. Where can find the image & how do I get it back on my phone?

I want to change my wallpaper to an image that was available
before I upgraded to IOS 8.1.3 - a close-up image of long reedy grasses with hazy light in the background.
Greyish hues. Where can find the image & how do I get it back on my phone?

I want to change my wallpaper to an image that was available
before I upgraded to IOS 8.1.3 - a close-up image of long reedy grasses with hazy light in the background.
Greyish hues. Where can find the image & how do I get it back on my phone?

How to disable or change the value of h:commandlink jsf component

Hi,
I am a student. I am using h:commandlink. I need to change the value of the component once it is clicked by the user. How do i do that?
If i cannot change the displayed value of the commandlink. I am thinking of atleast disabling the link once the user clicked., to avoid the link being clicked more than once by the user.
<h:commandlink id = "follow" action = "usermanager.followdoctor" value = "Follow"/>
Usermanager is my managed bean class for this jsp page. The value "Follow" is the one that i want to be changed to "following" once it is clicked. Please help me. Thanks for your time in advance.

Hello qimbal2,
Thanks for getting back to me. you are right , i should disable the link as soon as it is clicked. I went ahead and implemented this logic by using a property in my bean class and binding that property to the value of my link. I wrote the logic in my action method in such a way that when i click on follow for the first time, the value of the link would change to 'Following' and the link would be disabled. It works for me now.
Thanks,
Suha

How to change default value in a table using ALTER TABLE

Hi,
How to change default value in a table
I have a table TEST which has 2 fields CODE of Datatype VARCHAR2(10) and Indicator as VARCHAR2(1).
I want to change the default value using ALTER TABLE TEST of field Indicator to 'I'.
Any help will be needful for me
Thanks and Regards

user598986 wrote:
Hi,
How to change default value in a table
I have a table TEST which has 2 fields CODE of Datatype VARCHAR2(10) and Indicator as VARCHAR2(1).
I want to change the default value using ALTER TABLE TEST of field Indicator to 'I'.
ALTER TABLE test
MODIFY (indicator DEFAULT 'I');
Incidentally, INDICATOR is a keyword in Oracle, so you may have problems using it as a column name. If so, you'll have to enclose the column name in double-quotes, and be careful to use capital letters inside the quotes.
Edited by: Frank Kulash on Aug 26, 2009 11:42 AM

How to change the Value of a Varible while debugging in ECC 6.0

Hi all,
How can i change and Save the Value of a varible while debugging a FM in ECC 6.0.
I can able to change the Value of a variable by clicking the Pencil Icon (Change icon) which is there next to that value
But i am not able to save that value
Please give the suggestions
Thanks in Advance
Regards
Ajay

Ajay,
I think you are changing more than one variable value at a time...this things generally happen in this case.
Go step by step.....
Press on the pencil button
value filed becomes editable
change the value
and at once press the enter
the ediatble field automatically becomes non editable, and hence retain the changed value.
Pooja

How to change characteristics values in PPDS planned order?

Hi,
I have few PPDS planned orders. I want to change the value of few characteristics of existing PPDS planned order.
How can I do the same?
Any standard T.Code or function module or report available to update the characteristics values of PPDS planned order in APO.
Thanks in advance.
Warm Regards,
Surajit Das

Hi Surajit,
Char can be changed programatically.
If you want to change the Planned Order characteritics before its creation, you can do so at the time Planning run itself (/SAPAPO/RRP3) in BADI /SAPAPO/RRP_SRC_EXIT, Method RRP_USEX_PLORD_CREATE.
Planned Order characteritics can be changed after it creation.using BAPI BAPI_MOSRVAPS_SAVEMULTI3.

How to change the values in custom profiles based on security group ??

Hi,
i am facing problem for my requirement, can anybody help me for below scenario...
i have custom check in profiles , there are content types and sub types. sub type nothing but a categories on for particular content type. For example i have News content type , same in the below subtypes drop down list are press release, events, articles etc.
what i want to do is, when i open custom checkin profile, subtype values need to be changed( some values in subtype should hide) based on security group changes .
In the Sub type listed values, some values need to hide only when i choose different security groups.. sub types values should display based on the particular security group only. when ever i change the security group, drop down Values in subtypes needs to change.
hope understand my requirement.
How to achieve this task. Any help would be greatly appreciated.
Thanks,
yt

Hi,
Thanks alot. its working fine
Can we configure DCL Relation two times in one information filed ??? i should not create not more than fields to this requirement.
Type -> subtype = DCL already existed
Now, i want to Create DCL to
Subtype ---> Security group
As per my requirement, if i change the security group in checkin form, values should be change in the SubType drop down list.
Created checkin profile there was DCL relation to " Type and "Sub Type" . now i want to map Relation ( DCL ) for subtype to security group.
i was trying do for DCL for subtype and security group. but there was already existing DCL created for subtype information field (Relation configuration done for content type). even though i was trying to do for DCL in Security group information field. but, i could not find security group information field in configuration manager.
Now what should i do ?? how to create DCL to subtype and security group ??
Help would be appreciated.
yt

How to change the value of a variable in new ABAP debugger.

Hi Guys,
I can't change the value of a variable in the new ABAP debugger.. when I change its revert back to old value. but this is not the case with the old version. How to do this..
Cheers
Senthil

Hi,
1. Dobule click in the variable in the variable tab.
2. Click the Change icon in Detail.Dis.
3. enter the new value and press enter
Refer
[http://www.sapdb.info/new-abap-debugger/|http://www.sapdb.info/new-abap-debugger/]
[http://help.sap.com/saphelp_nw70/helpdata/en/84/1f624f4505144199e3d570cf7a9225/content.htm|http://help.sap.com/saphelp_nw70/helpdata/en/84/1f624f4505144199e3d570cf7a9225/content.htm]
<removed_by_moderator_together_with_points>
Regards,
SB
Edited by: Julius Bussche on Jun 24, 2008 8:21 AM

How to change the value of Valuation class.

dear friends:
i want to change the value of Valuation class in the material master .but system warning info occurs .
The valuation class cannot be changed
Message no. M3 368
Diagnosis
You wanted to change the valuation class. However, this is not possible because one or more of the following already exist for the material:
Valuated stocks in the current period or in the previous period
Open purchase orders or delivery schedule lines
Production orders for which a goods movement has already taken place
System Response
Your change is reset by the system.
Procedure
If valuated stocks already exist, you can change the valuation class only as follows:
a) Post the stocks of the material to an interim account.
b) Change the valuation class in the material master record.
c) Post the stocks of the material back to their original account.
If open purchase orders already exist, you can only change the valuation class if you first flag the corresponding purchase order items for deletion.
If production orders exist for which a goods movement has already taken place, you can only change the valuation class if you first set the status of the production orders to Deleted.
Procedure for System Administration
In Customizing for the Material Master, you can switch the check for open purchase orders and/or for production orders to a warning. You do this in Define Attributes of System Messages by assigning the message type Warning to message MM 326 and/or MM 327 respectively. However, first ensure organizationally that further processing of the open purchase orders or production orders cannot result in inconsistencies.

To resolve SAP error message M3 368 I would suggest that you refer to SAP note number 1967543. This note outlines the issue and a resolution to it:
Please have a look at the description of the error M3 368. This error may occur if one or more of the following already exist for the material:
1. Valuated stocks in the current period or in the previous period
2. Open purchase orders or delivery schedule lines
3. Production orders for which a goods movement has already taken place
Resolution:
If you have valuated stocks in the current period or in the previous period, you will get message "Stocks already exist.". You have to clear all the stocks both in current period and previous period. Please have a look at SAP Note 30656, it shows an example on how to clear the stocks in
previous period. You can use transaction MIGO to execute this step.
If you have open purchase orders or delivery schedule lines, you will get message "Purchase orders already exist.". You can find related purchase orders after you click 'Display Error' button. Please delete them in transaction ME22N.
If you have production orders for which a goods movement has already taken place, you will get message "Production orders already exist.". Please archive these production orders. You need to set deletion flag for these orders firstly and go to SARA, use archiving object PP_ORDER to archive
these orders.
Kind regards,
James

How to change field values AFTER Inbound IDOC Posted successfully

Hi SAP Experts,
In my project I receive the inbound IDOC PORDCR05 from PI and posted as an Purchase Order in ECC.
I create the Z process code and Z function module (which is a copy version of IDOC_INPUT_PORDCR) and complete all the necessary configuration steps. It works perfectly.
My problem is: I have to collect some inbound idocs (that satisfied some criteria) and change the value of field EKPO-TXJCD and EKKN-KOSTL of the PO AFTER it posted successfully (means the purchase order is created and save in database).
How can I do this? I've try to put the logic code in Z function module, but it does not work, since at that time, the Inbound IDOC is not updated to the database yet.
Aprreciate your advise.
Regards,
Elaine.

Hi Elaine ,
as per your cretiria pick the idocs and take created PO# from status 53 & use the BAPI (BAPI_PO_CHANGE) to change the neccessary values in the PO. We can't reprocess those idocs again.
Reddy

How to change the value boimg://

In Webi document reports, our developpers use images for company logos through URLs, which are not handled when converted to PDF.
So they were told to use the BOIMG:// value which refers to a local folder on the BO server where the images should be stored.
My concern is since we have a two servers clustered environment and want to avoid copying images on both servers locally, is there a way to change the value of BOIMG://value ?
BOIMG refers to D:\Program Files (x86)\Business Objects\BusinessObjects Enterprise 12.0\Images and I would like to change it to a central file server such as
servername\images
Thanks
Jay

Thanks Dennis,
I had changed the value you're mentioning but my developer contact told me it was still not working. So I thought there might be something else...
Problem is:
he used the
servername\images when calling the images instead of the BOIMG:// value which uses the setting you're mentioning.
Everything is now working, after server is restarted.
Thanks.
Jay

How change saturation value of a image??

Similar Messages

Maybe you are looking for