How do I ad a new track to a patch and have it (all all it's parameters) appear in all patches of a given concert?

Hi there, We use MainStage 3 to play backing tracks for my daughters shows. From time to time I either have to add a tracks (like a back up vocalist who is joining her for the evening) or I have to make a change to a track that already exist in all of the patches in a given concert (Her Piano track EQ plugins as an example). How can I add a track and have it appear in every patch in the concert? and, How can I have it so that when I make a change to a given track that the change is applied to that specific track in each patch.
Let me give an example because I do not feel like I am doing a very good job at being clear. So my daughter goes to play a show. We use MainStage to play back 8 different tracks for that show (drums, Bass, Synth, ELE GTR, AC GtR, Backing vox, VOX FX, and there is a live lead Vox track). Each track is coming out of her interface and being fed into the house mixer. When we do a sound check we determine that the drum track needs to have some effects and the EQ changed to make it sound better for that specific venue. I go to the first patch (first song in the set) and I make those changes to the drum track. How can I have it be that those changes are applied to the drum track of each patch of that concert (song in the set).
Also, let's say that a guest singer decides to sit in with my daughter and the are going to sing 5 songs with her. I know how to add a vocal channel and put the needed plugins on it (EQ, Reverb and such) but how can I add it to one patch (song) and have it appear with the same parameters in each patch of the concert? It takes to long to do the same thing over on each patch.
I'm sorry for the long winded question I am just trying to be clear.
Thanks in advance for your help.
Stan

Hi
sg335 wrote:
its somthing to do with the Aux indvidule Drums Cymbals tracks etc you get with the Producer Kits?
Yep
With the MultiOut Producer+ kits you have to jump through some hoops:
Convert to MIDI Regions
Move those regions to one of the Tracks inside the Stack
Then you can BIP
And get Audio
With a "Regular" Drummer Track you can just BIP regions or tracks
CCT

Similar Messages

How do I create a new document in Photoshop CC and have it 300 dpi?

How do I create a new document in Photoshop CC and have it 300 dpi? I am doing digital scrapbooking and need to have my layout in Photoshop 12 x 12 so it is a scrapbook page and 300 dpi and I hope this doesn't sound stupid but I don't even know what dpi means.
Thank you

File>New
Set preset to print or US Paper
(typing width and height values will change the preset to custom)
Set width to 12 inches
set height to 12 inches
set ppi to 300 (should already be this if you used the print preset)
Click OK

How can I delete the audio track from a clip and have no audio associated?

the clips I insert always add an audio track,and seem to be linked to video track.I just want to delete audio tracks,and have no audio track associated with the original clips .
How do I do this ???

Second time this question came up today.
Click the a1/a2 buttons in the patch panel at the head of the timeline to decouple the audio from A1/A2. Then edit the picture into the timeline.

How can I edit imported audio track? After selecting and deleting region and joining remaining parts, it keeps playing the track with the deleted part! What am I doing wrong?

How can I edit imported audio track? After selecting and deleting region, and joining remaining parts, it keeps playing the track with the deleted region!
What am I doing wrong?

After selecting and deleting region, and joining remaining parts, it keeps playing the track with the deleted region!
What am I doing wrong?
How exactly are you doing this?
When I cut out a part of an audio region, then drag the remaining parts together, so they are touching, the track will skip the cut out section when playing the file. Also, if I select the remaining parts of the region and use the command "Edit > join regions". This will create a new audio file with the cut out part deleted.
You should see this prompt, when you are joining the regions:

How do I seperate the audio track from the video and save it to a CD in Premiere Elements 13?

How do I seperate the audio track from the video and save it to a CD in Premiere Elements 13?

Binbashi
You can separate the audio track from video and save it to a DVD disc within Premiere Elements but not a CD disc.
To do save to the audio to DVD disc, you do not have to separate linked audio video, just use the export Publish+Share/Computer/Audio and set Presets to the wanted format (AAC, AIFF, MP3, or Windows Waveform (WAV).
You will not see Audio in the choices since it is at the bottom of the list of choices under Publish+Share/Computer/. You will need to use the thin scroll bar to the right of the choices to scroll to it.
If you need information on selective export of Timeline content when dealing with more than just this one file on the Timeline, please let us know. If you are trying to produce a CD for listening in car or CD player elsewhere, please let us know.
Looking forward to learning of your results.
Thank you.
ATR

How do I edit a merged clip in Audition, that was created in premiere to correct the synchronisation, and have it all updated to the premiere clip?

Hello,
How do I edit a merged clip in Audition, that was created in premiere to correct the synchronisation, and have it all updated to the premiere clip?
I have tried several tutorials but these either:
- show correction in premiere sequence (which is not practical; given the huge number of files we have)
- or show the editing in audition of a sequence, not the clip.
We have started merging audio and video (removing the original audio during merge) but some of the merged clips are out of sync, so we need to correct manually, BUT we want to correct the merged clip, which may or may not end up being used, so we do not want to take it to the sequence as all we are doing is prepare the synced files for editing.
Any idea how I can correct the synchronisation in Audition?, when I right click on clip and select "Edit in Adobe Audition" I get a list of files but not a multitrack session where I can see my video and audio tracks.

if premiere pro doesn't sync your footage properly, and you have a huge number of files, you may want to look at pluraleyes. there is a demo, and if it works properly, it would save you time to have it done right the first time, instead of tracking down random merged clips with bad sync.
premiere will either export a complete sequence or "edit clip in audition". the edit clip will create a copy of the original audio and open that in audition. there is no dynamic link, its just an audio file open in two programs at the same time. since there is no dynamic link, its not possible to bring merged clips into audition.
Adobe Premiere Pro Help | Synchronizing audio and video with Merge Clips
Once created, the merged clip cannot be re-synchronized, or adjusted. You must make a new merged clip.
Merged clip audio results in mono track audio only.Final Cut Pro XML and AAF interchange formats are not supported.
this doesn't give me much hope that audition or any other adobe program outside of premiere will help you fix the problem merged clips.

I updated my IPhone 3GS to the new 5.1 operating system and have since had a range of problems with not only my phone but also my IPad.

I updated my IPhone 3GS to the new 5.1 operating system and have since had a range of problems with not only my phone but also my IPad.
Programs (Safari, mail, messages) keep crashing, mail will not delete properly (some will keep popping into my inbox again for no reason!!!), slow, settings lock up etc. etc.
This only seemed to become an issue once I updated to ios 5.1 and funnily also affected my Ipad even though i hadn't updated the software yet. I have since updated the software on my ipad thinking it might help too but that only made things worse!! So I am not sure if it's an ICloud issue, but when i try to disable ICloud my devices lock up as well.
The battery life is also shocking!!
I have hard reset both devices, restored both devices, reset the setting and tried a whole host of other suggestions (like closing background programs) on this forum buit nothing works and i am tearing my hair out.
I looked in the phone and ipad log and there do seem to be low memory reports though i don't know why these are occuring now when they never have before??
I don't know if I can restore the old operating system (If I can please let me know how). The phone or ipad are not jailbroken.

but you should have a backup in itunes.
Every time you sync your iOS device iTunes creates a backup. go check if its there, iTunes Preferences >Devices. and there you should see if you have a backup, and in case from which date the backup is.
And ofcourse you can get your icloud data back by just logging in with your Appleid under icloud in settings on the iphone.
But anyway, if the iPhone works when you restor it as new: try adding your backup, and see if the issue comes back. And experiment with your backup and try to work out what is causing the issue, my guess is that its some app! Good Luck!

How do I delete a movie (not bought from iTunes) and have it actually deleted from the library as well?

How do I delete a movie (not bought from iTunes) and have it actually deleted from the library as well, I keep deleting stuff from iTunes to try and free up some space only to find the file still in the library?

It depends upon what preferences settings you use. Most people use default settings so when you delete an item it asks you if you want to get rid of the file too.
If iTunes absolutely refuses to get rid of the file (I have never heard of this by the way) you can always go to the media folder or wherever the file is located and drag it to the trash yourself.

I`d like to know how can i insert documents, xls/doc/pdf into iCloud and have them in my iPhone and my iPad. I just found one way, through ibooks, but i think it isn't a practical option.

I`d like to know how can i insert documents, xls/doc/pdf into iCloud and have them in my iPhone and my iPad. I just found one way, through ibooks, but i think it isn't a practical option.

Just use Drop Box instead.

My past computer crashed and I am trying to get all my itunes songs back for my new computer, but even though I have downloaded all my past purchases some of them still aren't playing and can't be located. What can I do?

My past computer crashed and I am trying to get all my itunes songs back for my new computer, but even though I have downloaded all my past purchases some of them still aren't playing and can't be located. What can I do? It is quite alot of lost songs/ money.....
Thanks anyone who can help, Apple make it impossible to talk to anyone or contact and I can't navigate Express Lane
x

I realise there have been a number of threads like this now that I have started looking, the problem is the back-ups i made were saved to a server network which has now also gone down, a case of dreadful luck really. Is there any other way to get the music back?
Regards

Because I can no longer open Adobe files, and have tried all obvious solutions, I've been told to defrag the Intel portion of my MacBook Pro. How do I do this?

Because I can no longer open Adobe files, and have tried all obvious solutions, I've been told to defrag the Intel portion of my MacBook Pro. How do I do this?
I never use the Intel side, and have never partitioned the MacBook Pro.
Message was edited by: MacGirl221b

I never use the Intel side,
Not understood, Intel make the processor that runs your Mac, there is no other 'side' to your Mac.
What Adobe application are you trying to open files with?

HT1329 I've had to replace the hard drive on my PC and have lost all my music apps etc on i tunes. How do I retrieve them ?

I've had to replace the hard drive on my PC and have lost all of my itunes !!! How can I retrieve the music ?

See Recover your iTunes library from your iPod or iOS device.
tt2

I just bought a new dell quad core 5i and HAVE DOWNLOADED THE TRIAL VERSION OF PHOTO SHOP - its Slow to open up a small file and equally as slow to print why?

HELP I just bought a new dell quad core 5i and HAVE DOWNLOADED THE TRIAL VERSION OF PHOTO SHOP - its Slow to open up a small file and equally as slow to print why?

Use Photoshop menu Help>system Info... use its copy button and paste that info in an append here.
Supply pertinent information for quicker answers
The more information you supply about your situation, the better equipped other community members will be to answer. Consider including the following in your question:
Adobe product and version number
Operating system and version number
The full text of any error message(s)
What you were doing when the problem occurred
Screenshots of the problem
Computer hardware, such as CPU; GPU; amount of RAM; etc.

Syncing photos from 4s to new 5s is very slow and stopping. All other sync is ok. Any tip? someone.

Syncing photos from 4s to new 5s is going slow and stops. All other sync is ok. Any tips? someone.

or... put your photos in "My Pictures" in My Documents, and viola, itunes syncs it to the iphone. only one sentence needed =/
maybe im missing your point here, the long paragraph is mindboggling

How can I set screen saver clock which show time and date when all screen is black. Other phones have this option but I didn't find on iphone. Pl guide.

How can I set screen saver clock which show time and date when all screen is black. Other phones have this option but I didn't find on iphone. Pl guide.

HA! I figured the find my iphone out!!!!! You can have more than one icloud account in "Mail, Contacts and Calendars". So my husband's & kids' phone icloud account under "settings, icloud "is their individual @me.com account. Set it to everything you want EXCEPT Find My Iphone. Then under "settings, mail/contacts/calendars" you set up both accounts (your @me.com which may already be there), then add another with the main appleID and enable ONLY Find My Iphone. Now when any of us log into Find My Iphone from any device with our main apple ID for the app store, all the devices show up!!!! YIPPEE. I made my own day!
I think the message I got previously was because I hadn't disabled the find my iphone on the @me.com account first.

How do I ad a new track to a patch and have it (all all it's parameters) appear in all patches of a given concert?

Similar Messages

Maybe you are looking for