How do I add a list of numbers stored in an array
How do I add a list of numbers stored in an array? The code I
have is showing ‘NaN’ when I try to add the second item
in each element of the array:
var aItemPrices:Array = new Array(["item1_mc", 10], ["item
2_mc", 20], ["item 3_mc", 30]);
var totalPrice:Number;
for (i=0; i<aItemPrices.length; i++) {
//the following line traces 'NaN'
totalPrice += aItemPrices
[1];
trace("totalPrice: "+ totalPrice);
i modified your code in 2 places, check it
var aItemPrices:Array = new Array(["item1_mc", 10], ["item
2_mc", 20], ["item 3_mc", 30]);
var totalPrice:Number=0; //Mani changes
for (i=0; i<aItemPrices.length; i++) {
//the following line traces 'NaN'
totalPrice += aItemPrices
[1];//Mani changes
trace("totalPrice: "+ totalPrice);
Similar Messages
-
How do I add multiple rows in Numbers for iPad?
how do I add multiple rows in Numbers for iPad?
Hi James,
On the iPod I can only insert what is on the clipboard but I can insert however many rows I have there. Is it working differently for you? Benjoon seemed to think that he could not do this in Numbers. He was ruling Numbers out because of it. He doesn't need to do that because of this issue.
If I was needing to insert multiple blank rows often I might keep a table of blank rows or just some blank rows at the end of the working table that I could copy/paste. This is no different than Numbers on the Mac.
quinn -
How do I add most frequently called numbers
How do I add most frequently called numbers?
Thank you,
MarilynIf you mean call favorites, open Phone, tap the Favorites button at the bottom, tap the plus sign at the top, choose the contact and number you want to add.
-
How to find max value from a list of numbers stored in a varray?
hi,
Can any body help me to get the max value from a list of numbers stored in a varray?
thanks in advance....
regards
LaxmiNarsimhaYes. Could you post what you have tried before we start helping you in this?
-
How to create a pulldown list in numbers
how to create a pulldown list in numbers
Here is it:
Open Applescript editor
Copy the entire script and paste it into Applescript Editor
Compile it
Read the instructions at the top of the script
Run the script, following the instructions.
You can save the script and it will be available in the Scripts menu (on the right side of the menu bar where Time Machine , Airport, and all those icons are).
Copy and paste all of what is below:
-- Script to populate a Numbers pop-up list.
-- Instructions:
-- GUI scripting must be on in System Preferences
-- Create a list of items. Must be a contiguous range of cells in a table.
-- Select the range of cells to use as items in the popup.
-- Run the script.
-- A dialog box will appear asking you to select which cells you want to turn into pop-ups
-- Select the cells then click OK on the dialog box
set tValues to my doThis(1) -- get values of the selection
if tValues is not "" then
activate
display dialog "Select the cells where you want to create the PopUp." & return & "After that, click on the 'OK' button."
my doThis(tValues) -- set the cell format of the new selection to "PopUp Menu" and set the values of the each menu item
tell application "Numbers" to display dialog "Done"
else
tell application "Numbers" to display dialog "You must select the cells in a table before running this script."
end if
on doThis(n)
tell application "Numbers"
set tTables to (tables of sheets of front document whose its selection range is not missing value)
repeat with t in tTables -- t is a list of tables of a sheet
if contents of t is not {} then -- this list is not empty, it's the selected sheet
set activeTable to (get item 1 of t)
if n = 1 then return value of cells of selection range of activeTable -- return values of the selection
set format of (cells of selection range of activeTable) to pop up menu -- set the format to pop up menu
return my setValuePopUp(n) -- set value of each menu item
end if
end repeat
end tell
return ""
end doThis
on setValuePopUp(L)
tell application "System Events"
tell process "Numbers"
set frontmost to true
delay 0.3
set inspectorWindow to missing value
set tWindows to windows whose subrole is "AXFloatingWindow"
repeat with i in tWindows
if exists radio group 1 of i then
set inspectorWindow to i
exit repeat
end if
end repeat
if inspectorWindow is missing value then
keystroke "i" using {option down, command down} -- Show Inspector
else
perform action "AXRaise" of inspectorWindow -- raise the Inspector window to the front
end if
delay 0.3
tell window 1
click radio button 4 of radio group 1 -- the "cell format" tab
delay 0.3
tell group 2 of group 1
set tTable to table 1 of scroll area 1
set tc to count rows of tTable
set lenL to (count L)
if tc < lenL then -- ** add menu items **
repeat until (count rows of tTable) = lenL
click button 1 -- button [+]
end repeat
keystroke return -- validate the default name of the last menu item
else if tc > lenL then -- ** remove menu items **
repeat while exists row (lenL + 1) of tTable
select row (lenL + 1) of tTable
click button 2 -- button [-]
end repeat
end if
tell tTable to repeat with i from 1 to lenL -- ** change value of each menu item **
set value of text field 1 of row i to item i of L
end repeat
end tell
end tell
end tell
end tell
end setValuePopUp -
How do I add a few more numbers to my Friends and Family?
How do I add more numbers to my Friends and Family?
Hello lisascv,
I want to make sure we can get your plan updated. The use of Friends and Family numbers is a great way to esnure that the people you call most don't affect your allowance. For steps to manage your Friends and Family list, please use the following link and select Friends & Family: http://vz.to/1n8QjsJ
AndreaS_VZW
Follow us on Twitter @VZWSupport -
How do you add a page on Numbers?
Help!!!
How do you add a page on the Mac application Numbers?
Every time I search it on google it comes up with how to insert page numbers, and that's not what I want!!
So, what I really, really need to know is how do you insert a page on the mac application Numbers??Do you mean this?
Click the "plus" icon to add a sheet.
SG -
How do I add a picture in numbers from desktop
I need to add a picture into Numbers. It's not in iphoto. It's located on my desktop.
Select the menu item "Insert > Choose", then navigate to the file... OR
Start in the Finder with the Numbers window in view, then drag the files you want to put in your Numbers doc into Numbers -
How do you add a list of values feature in jdeveloper please ?
Hello,
I need to add a list of values on a field so that users can query depending on values found in " list of values " ?
Thanks.I have tried to add an lov using the following code but it doesn't work
<af:inputListOfValues id="PrtCode"
popupTitle="Search and Select: #{bindings.PrtCode.hints.label}"
value="#{bindings.PrtCode.inputValue}"
label="#{bindings.PrtCode.hints.label}"
model="#{bindings.PrtCode.listOfValuesModel}"
required="#{bindings.PrtCode.hints.mandatory}"
columns="#{bindings.PrtCode.hints.displayWidth}"
shortDesc="#{bindings.PrtCode.hints.tooltip}">
<f:validator binding="#{bindings.PrtCode.validator}"/>
</af:inputListOfValues> -
How do I add more than two numbers in a single cell
I am wanting to add more than two numbers/values in a single cell.
A1 = B1+C1+D1
OR
A1 = SUM(B1:D1)
this is exactly summing three cells but may be extended to any number of cells up to the limit of the Numbers application -
How to retrieve web service results that are stored in an array?
Hi, everyone,
I am using a manually created web service reference in APEX3.0.1 to call an external web service for a simple company search. Here is the WSDL:
http://ws.strikeiron.com/DnBBusinessProspectLinkage2?WSDL
The web referene is tested fine. And here is a sample test result:
<?xml version="1.0" encoding="utf-8"?>
<soap:Envelope xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
<Header xmlns="http://schemas.xmlsoap.org/soap/envelope/">
<SubscriptionInfo xmlns="http://ws.strikeiron.com">
<LicenseStatusCode>0</LicenseStatusCode>
<LicenseStatus>Valid license key</LicenseStatus>
<LicenseActionCode>7</LicenseActionCode>
<LicenseAction>No hit deduction for invocation</LicenseAction>
<RemainingHits>4921</RemainingHits>
<Amount>0</Amount>
</SubscriptionInfo>
</Header>
<soap:Body>
<CompanySearchResponse xmlns="http://www.strikeiron.com">
<CompanySearchResult>
<ServiceStatus>
<StatusNbr>213</StatusNbr>
<StatusDescription>Successful search</StatusDescription>
</ServiceStatus>
<ServiceResult>
<Count>2</Count>
<CandidateCompanies>
<CandidateCompany>
<CompanyName>MSC SOFTWARE CORPORATION</CompanyName>
<StreetAddress>2 MACARTHUR PL</StreetAddress>
<City>SANTA ANA</City>
<State>CA</State>
<PostalCode>927075924</PostalCode>
<Phone>7145408900</Phone>
<CountryCode>US</CountryCode>
<BranchIndicator>Headquarters</BranchIndicator>
<TradingName />
<ConfidenceCode>8</ConfidenceCode>
<MatchGrade>BAAAAZZ</MatchGrade>
<MatchNameGrade>Similar</MatchNameGrade>
<MatchNamePercent>62</MatchNamePercent>
<MatchStreetNumberGrade>Same</MatchStreetNumberGrade>
<MatchStreetNumberPercent>100</MatchStreetNumberPercent>
<MatchStreetNameGrade>Same</MatchStreetNameGrade>
<MatchStreetNamePercent>100</MatchStreetNamePercent>
<MatchCityGrade>Same</MatchCityGrade>
<MatchCityPercent>100</MatchCityPercent>
<MatchCountryStateGrade>Same</MatchCountryStateGrade>
<MatchCountryStatePercent>100</MatchCountryStatePercent>
<MatchPOBoxGrade>Not provided</MatchPOBoxGrade>
<MatchPOBoxPercent>-1</MatchPOBoxPercent>
<MatchPhoneGrade>Not provided</MatchPhoneGrade>
<MatchPhonePercent>-1</MatchPhonePercent>
</CandidateCompany>
<CandidateCompany>
<CompanyName>TYRA TECHNOLOGIES, INC</CompanyName>
<StreetAddress>2 MACARTHUR PL</StreetAddress>
<City>SANTA ANA</City>
<State>CA</State>
<PostalCode>927075924</PostalCode>
<Phone>7145408900</Phone>
<CountryCode>US</CountryCode>
<BranchIndicator>Headquarters</BranchIndicator>
<TradingName />
<ConfidenceCode>8</ConfidenceCode>
<MatchGrade>BAAAAZZ</MatchGrade>
<MatchNameGrade>Similar</MatchNameGrade>
<MatchNamePercent>62</MatchNamePercent>
<MatchStreetNumberGrade>Same</MatchStreetNumberGrade>
<MatchStreetNumberPercent>100</MatchStreetNumberPercent>
<MatchStreetNameGrade>Same</MatchStreetNameGrade>
<MatchStreetNamePercent>100</MatchStreetNamePercent>
<MatchCityGrade>Same</MatchCityGrade>
<MatchCityPercent>100</MatchCityPercent>
<MatchCountryStateGrade>Same</MatchCountryStateGrade>
<MatchCountryStatePercent>100</MatchCountryStatePercent>
<MatchPOBoxGrade>Not provided</MatchPOBoxGrade>
<MatchPOBoxPercent>-1</MatchPOBoxPercent>
<MatchPhoneGrade>Not provided</MatchPhoneGrade>
<MatchPhonePercent>-1</MatchPhonePercent>
</CandidateCompany>
</CandidateCompanies>
</ServiceResult>
</CompanySearchResult>
</CompanySearchResponse>
</soap:Body>
</soap:Envelope>
Here is my xpath defined in the report:
/CompanySearchResponse/CompanySearchResult/ServiceResult/CandidateCompanies
According to the WSDL file, the candidate companies are stored in an array. I am having problem to retrieve this values from the array. The web service ref is called but it returns nothing.
Anyone in the forum can tell me what I did wrong?
Thanks in advance!
JeffHi, did you manage to figure this out? I'm having a similar problem with arrays.
Also, i'm looking at how I can pass an array of values as input to the webservice call.. eg if I were calling a stock ticker service that allows you to supply a list of tickers as input so that you can get all your responses in one call. Anyone any thoughts on that?
Cheers,
Paul. -
How do I add new currencies to numbers for iPad?
Hi,
I'd like to add a currency not currently in the drop down list as a currency. Specifically "N" for the Nigerian Naira. Is this possible and how would I do this?
Thanks in advanceHey,
Thanks for the reply. I should have specified that I was looking for a way the symbol could be an option under currency. This so I don't have to manually change each symbol to my desired one. However, if this isn't possible I understand.
Regards,
Moji -
How to delete ADD-INS listing in the "Tools menu
Hi
I deleted a couple of "ADD-Ins" I didn't need anymore "CalcTax" and "cTax"
stored in this directory: "C:\Users\John\AppData\Roaming\Microsoft\AddIns"
The mistake I made is that they where active and now I can't delete the two menu listed in the "Tools Menu".
I tried to redo the Add-Ins but it doesn't work.
I ran the "Remove Control macro" below but no success.
I checked the Registry for the two Add-Ins but found nothing.
Below is one of the two Add-Ins macro but not the original one. I deleted them.
and "No Backup"
Does anyone know how I can remove the two entries in the "Tools menu.
Option Explicit
Const cTag = "CalcTax "
Sub Auto_Open()
RemoveControl
With Application.CommandBars("Worksheet Menu Bar").Controls("Tools").Controls.Add
.Caption = "CalcTax"
.Tag = cTag
.OnAction = ThisWorkbook.Name & "!CalcTax"
End With
End Sub
Sub Auto_Close()
RemoveControl
End Sub
Private Sub RemoveControl()
On Error Resume Next
Application.CommandBars.FindControl(Tag:=cTag).Delete
End Sub
Sub start()
UserForm1.Show 0
End Sub
CimjetRe: Menubars/menus xl2003 and earlier
To remove any item from the menus...
Right-click in the menubar area and choose Customize (a dialog box is displayed).
Drag the unwanted menu item off of the menu and drop it over the worksheet.
Close the dialog box.
Jim Cone
Portland, Oregon USA
free & commercial excel programs (n/a xl2013)
https://jumpshare.com/b/O5FC6LaBQ6U3UPXjOmX2 -
How do I create email list in Numbers
I am trying to create a list of email addresses in Numbers which I can copy and paste into an email.
jemhockey,
Sorry I don't know how to do that however there is a Numbers forum, I'd suggest also posting your question there. -
How do you add play list from itunes to ipod on windows 8.1
I would like to create a new play list on my I pod nano Generation 4. I have the the music in my I TUNES library as files and as a playlist . How do I get this to my I pod.
Thanks for any help
FCiurczakHi macjake2,
The article below may be able to help you with this issue.
Click on the link below to see more details and screenshots.
I've quoted some helpful highlights for you:
Genius for iPod and iPhone
You can create Genius playlists in iTunes with preset limits of 25, 50, 75, or 100 songs. When you save Genius playlists and sync them to your iPod or iPhone, they contain the same songs that were present in the playlist on your computer.
I hope this information helps ....
Have a great day!
- Judy
Maybe you are looking for
-
Mail Crashed - Inbox Deleted - Trying Data Recovery - Help
I am running a G4 Powerbook 10.3.9 and Mail 1.3.11 locked up and crashed. My old Inbox is wiped out. Last July, I accidentally deleted my Sent emails but that was intentional (as in I thought I was in the Trash window, selected All and Deleted but as
-
Lenght of imported images is always 1 frame
I'm learning how to use After Effects (CC2014 in this case) and as soon as I started I found this problem. In all the tutorials I've seen, when an imported file (in this case a .png) is put in the composition, its lenght is by default the same as the
-
I can't view PDF files in firefox anymore. == This happened == Every time Firefox opened == after updating firefox
-
Reading dynamic table column based on user selection
Hi there, I am having a problem of reading and manipulating the data stored in a standard SAP table. The following example simulates the table and what i am trying to do: Table: Storing sales data for sales person SALES_PERSON REGION YEAR MTH_
-
Data centre connectivity options
Hello I am currently investigating a dual data centre design running in active/active mode. The data centres will each have connectivity to our WAN (MPLS) and to the Internet. They will have also have dedicated links to each other for site replicatio