How do I add borders to the form fields in the checkout page of my BC shop?

I am setting up my Shop for my website www.myartscreative.com. So far, so good. I am testing out going through the steps of ordering a copy of my sketch book, adding the appropriate shipping, etc. However, I notice when testing the checkout page, most of the fields do not have a border around them which makes it hard to see where to fill in the pertinent info. How do I add a border or fill (or both) the form fields so my customer can easily see where to type in their information? Here is the link to my shop's "check out page".

Ok, got it! So, I kind of figured it out by going into the Develop tab in the BC Admin and going into the modulestylesheets.css and modifying that. Check the link above again and you will now see the borders around the input fields. Probably no big deal to you pro's out there, but I am a total newbie up to this point. Thanks again!

Similar Messages

Can I script an email button to put one of the form fields in the subject line and to name the form?

This is a fillable form on a website. We want people to complete the form, then click on the email button to send it to us. Prefer to have the "name" field populate in the "subject line" of the email, and also rename the form that same field name. Is that possible?

In the sample I used the below syntax to send an email..
event.target.submitForm({cURL:"mailto:"+ strToAddress + "?cc=" + strCCAddress + "&subject=" + strSubject + "&body=" + strMessage,cSubmitAs:"PDF"});
The highlighted ones are local variables which will hold the value from the form fields.
If you want to get the Subject from Name field in the form, use some thing like this.
     var strSubject = name.rawValue;
     //and then pass the value to the code.
     event.target.submitForm({cURL:"mailto:"+ strToAddress + "?cc=" + strCCAddress + "&subject=" + strSubject + "&body=" + strMessage,cSubmitAs:"PDF"});
Hope this helps..
Thanks
Srini

How to specify xml file to populate form fields in the PDF file via command line?

Hi,
I would like to specify xml data file to populate my pdf file using command line.
The form was Reader extended.
I've tried the following syntax :
Acrobat.exe /A "zoom=100" "C:\example.pdf"#xml="C:\example.xml" but got an acrobat error: "the file name, directory name or volume label syntax is incorrect".
Where am I wrong?
Thanks!

>If I understand correctly you propose something like this
Something like, yes.
>
>Acrobat.exe /A "zoom=100" "xml=C:\example.xml" ....
Certainly, neither will work. /A is followed by a single quoted
string. There must be some separator, but I don't know what it needs
to be (as I was alluding to in my first reply).
To see if there is any hope, just try without the zoom= completely. In
any case you can set the zoom in the document properties.
Aandi Inston

How to Supply the form field values to a pdf form when loading it

I am working on a web site project using Asp.net where the user has to fill in a PDF eform in acrobat reader. Then when he clicks on submit it returns to my asp.net app and the PDF form supplies the values back to my asp.net app. So my asp.net app has the values that were filled in the PDF form and can save those values and work with them...
OK.
What I need to know is when I am in my asp.net app, and the user wants to go back and reopen the same form, from my asp.net app..... then how do I pass back the values that were saved back to the PDF form??
I know if I had a way to pass the values to the PDF form in some way then in the Doc.open or doc.load event of the form I could easily write a little javascript to plug in the values in the PDF form fields.
but how do I pass those values from my asp.net app to my PDF form???
thanks

Thanks bcweed for all the info. I fixed my problem, it had something to do with LiveCycle Designer. If I just use Acrobat to add the form fields, then the FDF works fine. As to your situation with the SavToBuf, that happens to be the method that I am using, so I will just post my code here, and maybe you can pick out what is different from yours. The Response.BinaryWrite(FDFin.FDFSaveToBuf)is at the bottom.
Sql = "SELECT * FROM Invoices" & WHERE
Set Conn = Server.CreateObject("ADODB.Connection")
Conn.Open Db_Conn_Str
Set Rs = Server.CreateObject("ADODB.Recordset")
Rs.Open Sql, Conn, adOpenStatic, adLockReadOnly, adCmdText
If Not Rs.EOF Then
End If
Set FdfAcX = Server.CreateObject("FdfApp.FdfApp")
Set outputFDF = FdfAcX.FDFCreate
'VendorID = VendorName = VendorNum = InvoiceDate = PreparedBy = ""
Gross = 0
For I=0 To Rs.RecordCount-1
If InStr(VendorID,Rs.Fields("VendorID")) = 0 Then
VendorID = VendorID & Rs.Fields("VendorID") & ", "
End If
If InStr(VendorName,Rs.Fields("VendorName")) = 0 Then
VendorName = VendorName & Rs.Fields("VendorName") & ", "
End If
If InStr(InvoiceNum,Rs.Fields("InvoiceNumber")) = 0 Then
InvoiceNum = InvoiceNum & Rs.Fields("InvoiceNumber") & ", "
End If
If InStr(InvoiceDate,Rs.Fields("InvoiceDate")) = 0 Then
InvoiceDate = InvoiceDate & Rs.Fields("InvoiceDate") & ", "
End If
If InStr(PreparedBy,Rs.Fields("PreparedBy")) = 0 Then
PreparedBy = PreparedBy & Rs.Fields("PreparedBy") & ", "
End If
Rs.MoveNext
Next
Rs.MoveFirst
outputFDF.FDFSetValue "VendorID",VendorID,False
outputFDF.FDFSetValue "VendorName",VendorName,False
outputFDF.FDFSetValue "InvoiceNum",InvoiceNum,False
outputFDF.FDFSetValue "InvoiceDate",InvoiceDate,False
outputFDF.FDFSetValue "PreparedBy",PreparedBy,False
For I=0 To Rs.RecordCount-1
outputFDF.FDFSetValue ("Line."&I), Rs.Fields("Amount")&"", False
outputFDF.FDFSetValue ("Company."&I), Rs.Fields("Company")&"", False
outputFDF.FDFSetValue ("GL."&I), Rs.Fields("GL")&"", False
outputFDF.FDFSetValue ("CC."&I), Rs.Fields("CostCenter")&"", False
outputFDF.FDFSetValue ("DocNum."&I), Rs.Fields("DocNumber")&"", False
Gross = CCur(Gross) + CCur(Rs.Fields("Amount"))
Rs.MoveNext
Next
outputFDF.FDFSetValue "Gross", Gross, False
Rs.Close
Set Rs = Nothing
Sql = "UPDATE Invoices SET DatePrinted = '" & Now() & "'" & WHERE
Conn.Execute Sql
Conn.Close
Set Conn = Nothing
outputFDF.FDFSetValue "PrintDate", Date(), False
outputFDF.FDFSetFile "http://admin/invoices/pdf/InvoiceAuthorization.pdf"
Response.ContentType = "application/vnd.fdf"
Response.BinaryWrite outputFDF.FDFSaveToBuf
outputFDF.FDFClose
%>

How to store forms fields into the session ?

Hi All,
I have to store forms fields into the session.
I have four forms (htm forms) in four jsps and there are total 25 fields.
I am inserting all the fields into the database at once while user submit the last form.
I want to use session to store forms fields.
So please anybody tell me how to do that.
Is the following code correct to store the forms fields into
the sesstion........
// creating a session
HttpSession session=request.getSession(true);
// retrieving form fields
String name=request.getParameter("customer_name");
String business=request.getParameter("business");
String address=request.getParameter("address");
and so on....
// store form fields into the session
session.setAttribute("name",name);
session.setAttribute("business",business);
session.setAttribute("address",address);
and so on....
and later on get the value as:
session.getAttribute("name");
session.getAttribute("business");
session.getAttribute("address");
and so on....
OR
is there another way to store form fields into the session.
Please guide and reply with coding.....
Please answer and help.
Thanks
Amitindia

I don't mean to be an *** but I have no desire to help someone so unwilling to think >>and do. Go through some of these tutorial, do the examples in each and you will be far >>better equipped to ask questions:
http://www.google.co.za/search?hl=en&q=%2Bjsp+%2Bjavabean+%2Btutorial&b >>tnG=Google+Search&meta=
I was just asking that if I use the following
<jsp:useBean id="cart" scope="session" class="session.Carts" />
<jsp:setProperty name="cart" property="address" value="myaddress" />
</jsp:useBean>then will I be able to acheive my aim as I have to store form fields into the session and later retreive while user submit the last form.
Please read my question that I have posted.
Am I using the right way................or which is the best way to store form fields into the session and later retrieve them.
please reply
Thanks
Amitindia

How to Validate a Portal Form field from the database

I created a Portal Form based on a procedure, which requires three parameters. One of the parameters is Item Number. I need to check if the Item Number exists in database. I am trying to use pl/sql button event handler, where I try to use the select count(*) statement to verify. However, I don't know how to reference the form field in the where clause. Please advise. Or is it possible to achieve this by creating a javascript? If you go to 'Shared Component' provider and click on javascript, you will see some system validation scripts, which you can call in the form level validation. My doubts with javascipt is how I can talk to database in the script? Any input is appreciated.

Hi,
You cannot access the DB from the script. If you want to access the values of a field you should use session variables. Here is a sample to access the values of a form field.
declare
ticket_no varchar2(20);
flight_no varchar2(20);
blk varchar2(30) := 'DEFAULT';
begin
ticket_no := p_session.get_value_as_varchar2(
p_block_name => blk,
p_attribute_name => 'A_TICKET_NO');
flight_no := p_session.get_value_as_varchar2(
p_block_name => blk,
p_attribute_name => 'A_FLIGHT_NO');
end;
Thanks,
Sharmila

How to Hide Form Field If the data null

Hi All,
I have an issue in the RTF, i am working in XMLP 5.6.2 Desktop Edition. I am developing template for Dunning Letter report. I have four fields in the footer like collector name,mail id, tele number and then fax. Here some collectors may not having fax and mail id since these fields are opition in the DFF. So I want to hide the form fields with the labels also if the collectors dont have mail id and fax nos. Now i am getting blank space for the collector who dont have mail id and fax nos. I dont knw what logic that need to apply over here.
I have the form fields in the template like ....
<?COLLECTOR_NAME?>
<?COLLECTOR_MAIL_ID?>
Tel. <?COLLECTOR_TELE?>
Fax. <?COLLECTOR_FAX?>
Please advice me to close this issue.
Thanks in Advance
Prabu

Hi,
This tag is working if the fax value is not in the xml code. But i am getting blank space
Cfx, In my report if mail id and fax is not avaliable then it displays like...
HENRY MICH (Collector name)
(Collector mail id)
432-627-9393 (Collector phone)
(Collector fax)
I want to display the in my report like
HENRY MICH
432-627-9393
I want to remove the blank space for the mail id and fax if the value is not there in the report.
Please advice me to resolve this...
with regards
prabu

How to view the Form Fields in Process data model?

Hi all,
I have made a form in LC Designer containing some name,ID and other generic details.Is there a way by which i can see those nodes in Proces data model when i load that document?.As of now it shows only attribute as Object. Can't I access those fields like name, id etc thru model directly.??

You have to define an XML Schema for the form and bind the form fields to the XML Schema. Additionally, embedding the XML Schema in the form makes life easier.
Given an XML Schema you will be able to navigate through the document hierarchy and access form fields in the XPath navigator.
If you would like a sample form, just send me a request at [email protected]

10G-Form: How to add Email-id to the To: field in the Outlook?

I am using 10G DB + 10G Form Builder.
I've 'email_item' field in table where I am storing email-ids.
I m displaying 'email_item' field and 'Send_Email_button' in the form.
I want to add (copy) the exact email-id that has been displayed on the form to the To: field in the Outlook.
Means whatever Email got displayed in the 'email_item' field, I want to add this Email automatically.
I do not want to type manually the email-id of the person in the To: field of the Outlook like I am using rt. now as:
WHEN-BUTTON-PRESSED trigger code=
WEB.SHOW_DOCUMENT ('mailto:hard_coded_value_of_email?subject=Testing%20Email: &body=Please%20check............');
Pl help me.
Gaurav

Hi,
For getting the email ID you can write a java code using the Iuser Interface. Have look to the following:
public class UseremailID extends AbstractPortalComponent
public void doContent(
IPortalComponentRequest request,
IPortalComponentResponse response)
try
IUserFactory userfactory = UMFactory.getUserFactory();
IUserSearchFilter userfltr = userfactory.getUserSearchFilter();
userfltr.setMaxSearchResultSize(5000);
ISearchResult userResult = userfactory.searchUsers(userfltr);
while (userResult.hasNext())
response.write("<table border=0>\n");
String uniqueid = (String) userResult.next();
IUser user = userfactory.getUser(uniqueid);
//IRole role = rolefactory.getRole(uniqueid);
response.write("<tr><td bgcolor=Red>"+ user.getDisplayName()+ "</td></tr>\n");
response.write("<tr><td bgcolor=Green>"+ user.getEmail()+ "</td></tr>\n");
response.write("</table>\n");
response.write("
\n");
catch (Exception e)
for analyzing the error you just need to check the log file at your server. Visit the following path:
<Your_SAP_Drive> :/usr/sap/<your_System_Name>/jc00/j2ee/cluster/server0/log/
There you can view the .trc file. Open that file and look for the error or the Stack trace in that.
i think it may help you

How do I create a text box or form field on the top of every page of a pdf in XI Pro for titles?

I generate pdf content from another program and then in Acrobat XI Pro I want to add titles to each page.
I'm thinking I can use form fileds and duplicate across all pages but how do I make each form filed unique?
Or could i add a form field to a background and then apply the background to every page in the pdf?
thanks.

This type of thing is probably best done with a script, either by adding a uniquely named field to each page or by spawing a template page that contains just the form field (like your last idea). There's not a built-in method for doing this. If you add a blank page to the beginning of the document, create the field in the location you want, and make the page a template, you can run the following script in the interactive JavaScript console (Ctrl+J):
// Get a reference to the template
var t = getTemplate("Field");
// Spawn the template on each page, automatically renaming the fields
for (var i = 1; i < numPages; i += 1) {
t.spawn({nPage: i, bRename: true, bOverlay: true});
To run the code, select it all in the console and press Ctrl+Enter, or Enter on the numeric keypad.
To make a page a template in Acrobat 11, make sure you're on the page you want to make a template and select: Tools > Document Processing > Page Templates
and enter a name. I used a name of "Field" in the example above, but you can use anything.
To create a blank page, you can use the following script:
newPage({nPage: 0, nWidth: 8.5 * 72, nHeight: 11 * 72});
for an 8.5"x11" page. Adjust the numbers to match whatever your page size is. It will be added to the beginning of the document and you can then add the field and make it a template. Once the fields have been added, you can remove the template page.

Very urgent: How to append the form elements to the Querytext

Hi All,
Could anyone please guide me thru of how we can pass the Querytext in the serach results page in content server 10gR3. As far as I knew we
pass thru in submitfrm() function in the resource include query_submit_form_function.
Am actually trying to customize the search page and search results page and we have several onclick events in the search page.
When we click on the radio button or checkbox. we were able to see the metadata fields in the dropdownlist and I will select the field name
matches some value....How we can append the selected values to the QueryText. How can the Querytext build based on the selection of form
elements.
Please give me some idea...your help is very much appreciated. Let me know if you have any questions....
Thanks,
isha.

Hey,
Thanks for the response. I also got the same thought after going through in depth of Search related resource includes...
I'm not sure of how to do this. Which includes I need to modify. And where exactly I have to write this Onclick event. And where exactly I have to pass this hidden parameters...I knew that we do have to add in Searchform form. However do we need to add the hidden parameters to the standard resource include.
As far as I knew, submitfrm() is the function which holds of Searchform values and also query_form_init script.
Could you please guide me through the steps. Which resource incliudes I have to modify/override..
Thanks a lot for your help.

How do I extract email from a form and send the PDF to that user?

How do I extract email from a form and send the PDF to that user?

here you can add email to send to, CC, Subject, and body message
var oDoc = event.target;
                    oDoc.mailDoc({
                                                            bUI: false,
                                                            cTo: "Agency Contact Email",
                                                            cCC: "",
                                                            cSubject: "Write your title here,
                                                            cMsg: "Dear" + AgencyContact + "(" + AgencyContactEmail + ")\nThe student, " + FirstName + " " + LastName + " has applied to work at your agency. Please confirm they can work here blah blah blah.......\n\nThanks.\n\nrespectuflly,\n\nme"

How can I create a long employment form without making the form widget drag?

How can I create a long employment form without making the form widget drag?

Sorry Sachin, I mean that I created a simple form on the page from the widget and started adding fields to it. The more fields I add the slower the delay becomes in creating a new field. Even when I try to select and drag or move an item, there's a huge delay and sometimes the program feezes, loose what i've done and have ot restart.
I'm doing an enployment form that has more than 20 fields, at least, and I need to be able to build the fields in separate categories, like Education, Past Employment, etc... quickly without delay issues.
I can probably send you a snap shot of what I'm talking about if I cna post it or attach it here..?
~Andy

HOW CAN I ADD BORDERS TO MY PHOTOS

Once my photos are in iphoto how can I add borders or frames to them? Is there an application for this?

http://www.iborderfx.com/iborderfx/
Note that it has not been tested with iPhoto 11, so if you're using that version of iPhoto, use with caution.
Other than that use an external editor:
In order of price here are some suggestions:
Seashore (free)
The Gimp (free)
Graphic Coverter ($45 approx)
Acorn ($50 approx)
Pixelmator ($50 approx)
Photoshop Elements ($75 approx)
There are many, many other options. Search on MacUpdate. You can set Photoshop (or any image editor) as an external editor in iPhoto. (Preferences -> General -> Edit Photo: Choose from the Drop Down Menu.) This way, when you double click a pic to edit in iPhoto it will open automatically in Photoshop or your Image Editor, and when you save it it's sent back to iPhoto automatically. This is the only way that edits made in another application will be displayed in iPhoto.

How to add the date field in the dso and info cube

Hi all.
I am new to bi 7. in the earlier version v hav to button to add the date field. but in the bi 7 der is no option so can any body tell me how to add the date field in the data targets
Thanks & Regard
KK

my prob is solved
KK

How do I add borders to the form fields in the checkout page of my BC shop?

Similar Messages

Maybe you are looking for