How do I alter the announcements list so that it shows the most current news event at the top?

I have the announcent list module on my home page and it shows 25 news/announcements however you can only see a few on the home page without scrolling down. I would like it to display those events that are coming up soon (and then when the date has passed, remove them) rather than events that are six months away.
How do I do this please?
Regards
Kate

Hi Kate, depends on the setup. You mentioned scrolling so I guess your using one of those old BC templates?
By default announcements will run in date order so the new ones are at the top. There are options in the module to set it datereverse and by alphabetical.
{module_announcement}
{module_announcement,filter,id,noTemplate,effect,targetFrame,reserved,reserved,reserved,reserved,sort}
After adding the announcement module to a web page, you can make changes to it to slightly alter its behavior. Normally the module would look like:
{module_announcement,filter,id,noTemplate,effect,targetFrame,reserved,reserved,reserved,reserved,sort}
Parameters
filter - filtering criteria for display and can be one of the following:
i - individual item
a - all items
c - all items in some category
cl - latest items in some category
l - latest items
r - random item
id – system generated (do not change)
noTemplate – if you want to force the item not to use a site-level template when displayed pass in true, otherwise leave empty
effect – Enter ajax if you want to take advantage of the latest web technologies for a better customer experience
targetFrame – the frame in which to open the item in
reserved - for use in a future release
sort - if you leave this parameter blank, by default announcements are sorted from the latest to the oldest where the latest is displayed first
alphabetical - sorts announcements alphabetically
datereverse - sorts announcements in the reverse order, that is from the oldest to the latest
Examples of use
{module_announcement,a,,,,_parent} - displays all announcements and open them in parent frame
{module_announcement,l,5} - displays the latest five announcements.
{module_announcement,r,,true,ajax,_blank,,,,,datereverse} - opens a random item in a new window and doesn't apply the template. It uses the Ajax effect, where the detail content opens right underneath the announcement name and all the announcements are displayed from the oldest to the latest
{module_announcement,cl,34392,,ajax,,,,,5} - displays the five latest announcements in category 34392
Check to see what the module has been set as

Similar Messages

How do I get to the screen in Mail that allows you to delete multiple "Previous Recipients" from the list? I have seen it but cannot find it again. Help.

How do I get to the screen in Mail that allows you to delete multiple "Previous Recipients" from the list? I have seen this screen but cannot find it again. It shows all of the "Previous Recipients" in a long list. You can edit the list by selecting multiple names or all names with the command key and delete. Help.

Launch the Mail app on your Mac and go to Window>Previous Recipients.

How are the pWWN list populated in DCNM even before they are logged-in to the switch?

Hello All
DCNM v6.2.3
I see that the hosts are not logged-in to the switch, however via DCNM when I try to create device alias I find the pWWNs populated which are not logged-in. How are the pWWN list populated in DCNM even before they are logged-in to the switch?
Thanks
Chetan

This is definitely not happening automatically ? would be magic ! you can do it of course manually.

How can I activate an old version of Photoshop that I've loaded on my new tablet? The web activation doesn't work, and when I call the number, it says it's not being used anymore. Meanwhile, I'm down to 13 days till it stops working due to not being activ

How can I activate an old version of Photoshop that I've loaded on my new tablet? The web activation doesn't work, and when I call the number, it says it's not being used anymore. Meanwhile, I'm down to 13 days till it stops working due to not being activated. HELP? I really need to continue using this product for my home business.It works fine not activated but the threat is that it will stop working in 13 more days if I don't get it activated, and none of the activation methods they list seem to work.

The new serial number is to the right of your chosen download.

Hi, just need to know how to get my music, video, pictures and apps form my iPhone to my new laptop as the old computer, which I used before was stolen. I only have my phone left and if I try to conect it to my new laptop it's trying to delete everything.

Hi, just need to know how to get my music, video, pictures and apps form my iPhone to my new laptop as the old computer, which I used before was stolen. I only have my phone left and if I try to conect it to my new laptop it's trying to delete everything.

I have also noticed all my settings won't stay set, example....I removed the check mark from "third party cookies", the when I close Firefox and reopen the check mark is back, also my tool bar has screwed up....can't reset, been having trouble the up grade.

Hi I would like to know, how do I add a Hyperlink on Flash, that opens a PDF in adobe reader and not the web browser.

Hi I would like to know, how do I add a Hyperlink on Flash, that opens a PDF in adobe reader and not the web browser.

Yoh, what is FSCCommanr ? sorry man I am an absolute beginner in Flash. I tried the code:
/* Click to Go to Web Page
Clicking on the specified symbol instance loads the URL in a new browser window.
Instructions:
1. Replace http://www.adobe.com with the desired URL address.
Keep the quotation marks ("").
instance_name_here.addEventListener(MouseEvent.CLICK, fl_ClickToGoToWebPage);
function fl_ClickToGoToWebPage(event:MouseEvent):void {
navigateToURL(new URLRequest("http://www.adobe.com"), "_blank");
this is the same code I used before and it opens a pdf file in a web browser, and it doesn't open an AutoCAD file.

As a writer I'm using Pages to write my documents but the title shows up on every page. How do I set-up my page so that it shows up on only the first page?

As a writer I'm using Pages to write my documents but the title shows up on every page. How do I set-up my page so that it shows up on only the first page?

Don't put it in the Header.
Peter

When I run the cursor over a template it shows several pages but when i select the document it only brings up the first two pages to edit. How do I see them all?

When I run the cursor over a template it shows several pages but when i select the document it only brings up the first two pages to edit. How do I see them all?

Skimming the templates in the Template Chooser shows you all of the pages available in the template once you open it. You can insert the one(s) you want, even more than one of any of them. Most users don't want or need all of the different pages, especially when they start the document.

How do i get that little pop up menu with all the editing choices on it that i used to get? Is there a way to get the editing box to pop up as I make a new event instead of editing an event after i just made it ??????

How do i get that little pop up menu with all the editing choices on it that i used to get? Is there a way to get the editing box to pop up as I make a new event instead of editing an event after i just made it ??????

Michal,
iCal Help is a good place to start. Here are a couple of examples:

When you first download Pages, there is a welcome screen with a check mark, in a box, at the bottom left corner that says show this window when Pages opens. How do I recheck that box?

When you first download Pages, there is a welcome screen with a check mark, in a box, at the bottom left corner that says show this window when Pages opens. How do I recheck that box?

Alex,
Go to Pages Help, Welcome to Pages.
Jerry

When I´m editing a pallete - be it the controls palette or the function one - How can I edit a .mnu file, so that it shows the picture I want?

When one decide to edit controls or functions palletes, one of the options available is the insertion of a submenu and, when it´s done, the user is prompted to select which menu file - a file with a .mnu extension - he wants to use. All I want to know is how I can create a .mnu file so that it shows a picture I want - if instead of choosing a existent .mnu file I choose one that doesn´t exist, it will be created and a default picture will be shown. I went through the LabVIEW help without avail, so ...any help would be deeply appreciated !

If you wish to change the default submenu Icon to yours, simply right-click on the submenu Icon and select "Edit Submenu Icon..."
Is that what you wanna do?
Cheers!
Ian F
Since LabVIEW 5.1... 7.1.1... 2009, 2010
依恩与LabVIEW
LVVILIB.blogspot.com

Using Windows 7 and LR 5 when I look at the Keyword List a certain keyword has 7 pictures but when I check the Library Filter with that keyword 350 pictures are shown which includes the 7 pictures that have the keyword. Why does the Library Filter showi

Using Windows 7 and LR 5, when I look at the Keyword List a certain keyword has 7 pictures but when I check the Library Filter with that keyword 350 pictures are shown which includes the 7 pictures that have the keyword. Why does the Library Filter showing pictures that do not match the query

Dan,
Here's what's going on in the catalog you sent me, "Joel & Caitlin's Wedding". There is the keyword "gwenn", which is explicitly assigned to 7 pics. But keyword "schwartz" has a number of synonyms, including "gwenn", and it is assigned to 25 pics. There is no overlap between the two sets of pics.
I discovered these two occurrences by doing Metadata > Export Keywords, opening the exported file in an editor, and then searching for "gwenn". I found two occurrences of "gwenn":
gwenn
schwartz
{gwenn}
From this, you can see that the keyword "schwartz" has 9 synonyms, of which "gwenn" is one.
The filter criterion "Keywords Contain gwenn" will match the 7 pics that are explicitly assigned the keyword "gwenn", and it will also match the 25 pics assigned the keyword "schwartz", because that keyword has a synonym "gwenn".
This illustrates the behavior I mentioned above: The criterion "Keywords contains x" will match against any of a pic's assigned keywords, any of those keywords' ancestor keywords, and any of the synonyms of the assigned keywords and their ancestors.
So LR is operating correctly here, if not in a way that's easy to understand.
It appears that you are using the synonyms of "schwartz" to represent individual members of the Schwartz family. A better way of representing family relationships is to have a parent keyword "Schwartz", with subkeywords for each family member, e.g. "Gwenn Schwartz", "Joe Schwartz", "Jane Schwartz", etc. Repeating the family name in the subkeywords has a couple of advantages. LR usually only displays the "leaf" name of a keyword, so instead of showing you just "Joe", it will show you "Joe Schwartz", helpful when there are a number of different people whose first name is "Joe". Also, if you ever export your pics to other software, it may not understand the LR hierarchy and won't show the parent keywords, so again it's more informative to see a keyword named "Joe Schwartz" rather than "Joe".

I just got my iphone and i want to get all my apps and music from my ipod onto my iphone. the only problem is that my itunes is not recognizing my iphone in the devices. in fact there are no devices at all listed. Please help!

I just got my iphone and i want to get all my apps and music from my ipod onto my iphone. the only problem is that my itunes is not recognizing my iphone in the devices. in fact there are no devices at all listed. Please help!

See either:
iPhone not recognized in iTunes for Mac
iPhone not recognized in iTunes for Windows

HT1420 Feeling really stupid with my new MAC - I can't find the "Store" menu in iTunes as referenced in the support article on how to authorize a computer. Where is that menu option? I've looked all over the page, in my account, etc.

Feeling really stupid with my new MAC - I can't find the "Store" menu in iTunes as referenced in the support article on how to authorize a computer. Where is that menu option? I've looked all over the page, in my account, etc.

Authorization and Deauthorization
Macs: iTunes Store- About authorization and deauthorization.
Windows: How to Authorize or Deauthorize iTunes | PCWorld.
In iTunes you use the Authorize This Computer or De-authorize This Computer option under the Store menu in iTunes' menubar. For Windows use the ALT-S keys to access it. Or turn on Windows 7 and 8 iTunes menus: iTunes- Turning on iTunes menus in Windows 8 and 7.
More On De-authorizing Computers (contributed by user John Galt)
You can de-authorize individual computers, but only by using those computers. The only other option is to "de-authorize all" from your iTunes account.
1. Open iTunes on a computer
2. From the Store menu, select "View my Account..."
3. Sign in with your Apple ID and password.
4. Under "Computer Authorizations" select "De-authorize All".
5. Authorize each computer you still have, as you may require.
You may only do this once per year.
After you "de-authorize all" your authorized computers, re-authorize each one as required.
If you have de-authorized all computers and need to do it again, but your year has not elapsed, then contact: Apple - Support - iTunes - Contact Us.

Ihave music that i cant play on my new comp because the email associated with that account is no longer in use. how do i authorise my new account to play my music?

ihave music that i cant play on my new comp because the email associated with that account is no longer in use. how do i authorise my new account to play my music?

See:
Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities
or
Sync Your iOS Device with a New Computer Without Losing Data - How-To Geek

How do I alter the announcements list so that it shows the most current news event at the top?

Similar Messages

Maybe you are looking for