How do I change the tables

I have an application finished and now the ADMIN says I have to rename all the tables.
Do I have to redo the whole application??

Hi,
I've only ever renamed a few items and found it easiest to do an application export and then go through the sql file to identify the page(s) that the items were on, then go into each page and edit the appropriate objects. It could be that you could actually update the export file itself and then re-import it. You'd have to be careful to ensure that you only replace table names and allow for the fact that the export file may contain table names split over two lines - you'd then want to import into a new application id (just in case!)
Another suggestion, perhaps, would be to rename the tables and then create synonyms using the original names?
Andy

Similar Messages

How do I change the table to start from right to left

How do I change the table to start from right to left

iWork apps have bugs that make them unsuitable for RTL scripts in various ways. You might be better off using a different app if your work has a lot of RTL text.

How to dynamically change the table name for a update statement

Hi All,
I need to update a coulumn xyz in either of tables abc and efg based on some condition.
I wrote a cursor which has union of two queries(one querying abc and other efg)
Now based on some inparameter only one will be executed at a time.
And based on some condition a coulumn xyz needs to be updated which is in either of the table.
As the update condition is same
Update abc/efg set xyz=data where condition
I am looking to initialize a variable like v_tname based on some condition and update like
update v_tname .........
(Exactly that may not be like so, But looking a technique like this)
Please help

If there is only two tables you'll need to update then you are better off using static SQL and implementing something like this instead:
DECLARE
 update_condition BOOLEAN;
BEGIN
 -- initialize update_condition
 update_condition := <some_boolean_check>;
 IF update_condition
 THEN
 UPDATE abc
 SET xyz = some_val
 WHERE some_col = some_other_val;
 ELSE
 UPDATE fgh
 SET xyz = some_val
 WHERE some_col = some_other_val;
 END IF;
END;
/Hope this helps!

How to dynamically change the table name inside a view

Hi All,
create table t_auto_feeds
id number,
table_name vachar2(100));
insert into t_auto_feeds values(1,'T_FEED_POSITIONS');
insert into t_auto_feeds values(2,'T_KAP_MTM');
assume there are 100 records on id=1 in T_FEED_POSITIONS and 100 records of id=2 in T_KAP_MTM (id 1 is present only in t_feed_positions & id 2 is present only in t_kap_mtm)
i need to create a view such that it needs to give the count of records based on the id
create or replace view aa_view as
select count(*), id from t_feed_position group by id
union
select count(*), id from t_kap_mtm group by id;
I am getting a proper result when i query the view like select * from aa_view where id=1 but will the other union query seems to be a overhead?. I am having 10 such tables configured for different id in t_auto_feeds.so do i need to put 10 unions or is there a better way to handle this stuff.
I know i can use a PLSQL block and dynamically build view structure, the problem is the view itself is configured in a table , so i cant write a proc for this.. can this aa_view be modified such that it queries only the table(using the t_auto_feeds ) which matches the id rather than the entire list.
Kindly help me in this regard and let me know in case u need any further information from my side.

>
so do i need to put 10 unions or is there a better way to handle this stuff.
>
Yes - you need 10 unions
Yes - there is a better way so that only one of the 10 queries does anything.
You can use SYS_CONTEXT to control the query selection.
Here is an example of using SYS_CONTEXT. Try this code in the SCOTT schema.
create or replace context VIEW_CTX using SET_VIEW_FLAG;
create or replace procedure SET_VIEW_FLAG ( p_table_name in varchar2 default 'EMP')
as
begin
dbms_session.set_context( 'VIEW_CTX', 'TABLE_NAME', upper(p_table_name));
end;
select * from emp where 'EMP' = sys_context( 'VIEW_CTX', 'TABLE_NAME' );
select * from emp1 where 'EMP1' = sys_context( 'VIEW_CTX', 'TABLE_NAME' );
select * from emp2 where 'EMP2' = sys_context( 'VIEW_CTX', 'TABLE_NAME' )
exec set_view_flag( p_table_name => 'EMP' );
exec set_view_flag( p_table_name => 'EMP1' );
exec set_view_flag( p_table_name => 'EMP2');
SELECT sys_context( 'VIEW_CTX', 'TABLE_NAME' ) FROM DUAL
CREATE VIEW THREE_TABLE_EMP_VIEW AS
select * from emp where 'EMP' = sys_context( 'VIEW_CTX', 'TABLE_NAME' )
union all
select * from emp1 where 'EMP1' = sys_context( 'VIEW_CTX', 'TABLE_NAME' )
union all
select * from emp2 where 'EMP2' = sys_context( 'VIEW_CTX', 'TABLE_NAME' )
SELECT * FROM THREE_TABLE_EMP_VIEWNote that you set the context for the table you want. This doesn't have to be a table name it could just be flag value
-- use the emp table
exec set_view_flag( p_table_name => 'EMP' );
-- ue the emp1 table
exec set_view_flag( p_table_name => 'EMP1' );
-- use the emp2 table
exec set_view_flag( p_table_name => 'EMP2');

How to change the table's for an existing report

Hello,
How can I change the table names for reports created with a different table name? for e.g If I created a report which included a table called "2009_10_example", How can I change that table to a different table "2010_10_example1".
I am using Crystal reports 2008, and the reports were created using Report Creating Wizard.
Thanks,
Abhishek

In the Database Menu, there is an option Set Datasource Location. This allows you to pick a table from the current tables used, and select a table to replace it with. Press the Update button, and Crystal will swap one for the other. If the field names and data types are all the same, it will automatically change all references throughout the report to the new table's fields.
May I suggest that your tables are set up improperly if you have to change report code to run it for different months? The data should all be in one table with dates, and parameters to select the date range to report on. (That was said in the spirit of helping...)
HTH,
Carl

How can i change the column label text in a alv table display

how can i change the column label text in a alv table display??
A similar kinda of question was posted previuosly where the requirement was the label text was needed and following below code was given as solution :
* declare column, settings, header object
DATA: lr_column TYPE REF TO cl_salv_wd_column.
DATA: lr_column_settings TYPE REF TO if_salv_wd_column_settings.
DATA: lr_column_header type ref to CL_SALV_WD_COLUMN_HEADER.
get column by specifying column name.
lr_column = lr_column_settings->get_column( 'COLUMN_NAME1' ).
set Header Text as null
lr_column_header = lr_column->get_header( ).
lr_column_header->set_text( ' ' ).
My specific requirement is i have an input field on the screen and i want reflect that value as the column label for one of the column in the alv table. I have used he above code with slight modification in the MODIFYVIEW method of the view since it is a process after input. The component gets activated without any errors but while run time i get an error stating
"The following error text was processed in the system CDV : Access via 'NULL' object reference not possible."
i have checked in debugging and the error occured at the statement :
lr_column = lr_column_settings->get_column( 'CURRENT_YEAR' ).Please can you provide me an alternative for my requirement or correct me if i have done it wrong.
Thanks,
Suri

I found it myself how to do it. The error says that it is not able to find the reference object i.e it is asking us to refer to the table. The following piece of code will solve this problem. Have to implement this in WDDOMODIFYVIEW method of the view. This thing works comrades enjoy...
DATA : lr_cmp_usage TYPE REF TO if_wd_component_usage,
 lr_if_controller TYPE REF TO iwci_salv_wd_table,
 lr_cmdl TYPE REF TO cl_salv_wd_config_table,
 lr_col TYPE REF TO cl_salv_wd_column.
DATA : node_year TYPE REF TO if_wd_context_node,
 elem_year TYPE REF TO if_wd_context_element,
 stru_year TYPE if_alv_layout=>element_importing,
 item_year LIKE stru_year-i_current_year,
 lf_string TYPE char(x),
DATA: lr_column TYPE REF TO cl_salv_wd_column.
DATA: lr_column_header TYPE REF TO cl_salv_wd_column_header.
DATA: lr_column_settings TYPE REF TO if_salv_wd_column_settings.
Get the entered value from the input field of the screen
node_year = wd_context->get_child_node( name = 'IMPORTING_NODE' ).
elem_year = node_year->get_element( ).
elem_year->get_attribute(
 EXPORTING
 name = 'IMPORT_NODE-PARAMETER'
 IMPORTING
 value = L_IMPORT_PARAM ).
WRITE L_IMPORT_PARAM TO lf_string.
Get the reference of the table
lr_cmp_usage = wd_this->wd_cpuse_alv( ).
IF lr_cmp_usage->has_active_component( ) IS INITIAL.
 lr_cmp_usage->create_component( ).
ENDIF.
lr_if_controller = wd_this->wd_cpifc_alv( ).
lr_column_settings = lr_if_controller->get_model( ).
get column by specifying column name.
IF lr_column_settings IS BOUND.
 lr_column = lr_column_settings->get_column( 'COLUMN_NAME').
set Header Text as null
 lr_column_header = lr_column->get_header( ).
 lr_column_header->set_text( lf_string ).
endif.

How Do I Change the Padding in Table Cells

Hi, I am trying to set up a table that will allow text to fill the entire cell. I know that if I double click an individual cell, the left and right boundaries of the cell will be displayed on the ruler. However, I can't select multiple cells (even in a column) to adjust the boundaries. By default, all cells are created with no padding on the left, but half an inch on the right. I want no padding on the right as well. I know I can change the the tab for the table with the text inspector, after the fact.
So, #1. How can I change the default right cell wrap for all cells in a table?
Additionally, I know how to get rid of the padding above the text (via text property "instant margins"), but I also need to eliminate the padding at the bottom of the text. When I adjust the instant margin, it just moves the text the upper-left corner of the cell, but does not change the vertical size of the cell. I can change the individual row height by grabbing the border and dragging it up, but, again, this is a pain for large table. I know I can also change the overall cell height by dragging the lower table boundary.
#2. How do I change the default cell height so the cell is tight against the text, regardless of the font size, for all cells in a table?
Any help or suggestion will be greatly appreciated.
Thanks
Gary

Thanks for the reply.
Unfortunately, those options will not do what I need.
If I turn off "Wrap text", the text overflows the cell and the text in the adjacent cell to the right will hidden. I still want the text to wrap, just not half an inch from the right border.
And the "Resize to fit" changes the cell width, which I want to keep the cell at a static width.
One workaround I found, was to modify the table as needed, using text properties, and then save the table as the table default. Unfortunately, that overwrites the factory default, and new table's tabs in other templates (all other properties seem to be retained)
The second option that seems to work, is to save my entire document as a template. That seems to hold all the properties for graphics, tables, etc.
A bit kludgy, but those methods seem to do the trick.
Now, how do I get the default table properties back?
Gary

How do I change the background color of a row in a table indicator?

Hello,
How do I change the background color of a row in a table indicator? I know how to change the background color in a active cell, but that is not what I want. My first intent is to make the background color of the first row a unique color, such as green, just to highlight the top row of the table.
Regards,
Kaspar
Regards,
Kaspar

I have done this before by using a for loop to change the active cell of a row in order to give the appearance that the whole row is turning the color at once.
CLA, CLED, CTD,CPI, LabVIEW Champion
Platinum Alliance Partner
Senior Engineer
Using LV 2013, 2012
Don't forget Kudos for Good Answers, and Mark a solution if your problem is solved.

How do I change the number formatting within a Cell Table in Microsoft Word?

Hi, I was wondering if someone could help me out on an issue I've been having... I work for an accounting firm and we do a lot of financial statements.
I was wondering if we would be able to treat a cell table in Microsoft Word 2007 like I would a cell table in Microsoft Excel. Meaning, I would like to change the formatting of the numbers in the table to the "Accounting" (number) format so it
aligns by the decimal point and use the $ signs and () for negative numbers. We do use the link tables feature, however, most of our balancing pages just can't be done in Excel because of the way the text is written. It would be much harder to format
the text if it were to be typed in Excel. We have also tried creating an Excel sheet within Microsoft Word but it is the same as linking the tables... Again, a text formatting issue. The only option is to use tables within Word but how do we change
the number formatting to a "accounting" (number) format where the numbers would align with the decimal point and use () for the negative numbers. Is there ANY option for us to do this other than manually entering this information in using tabs?
If there are no options other than entering it in manually, please consider this as an option for your next software update. I believe that a LOT of people out there will be interested in this feature... My manager and I just attended a webinar on Microsoft
Advanced Word Tips Tricks and Techniques and 75% of the attending people had this question but no answer.
Thank you very much for your help!!!!!

Word does not really have number formatting for table cells. You can align cell contents on the decimal point, though, by setting a so-called decimal tab stop.
Option 1:
- Select the cells for which you want to do this.
- Display the ruler.
- Click the Tab box on the left hand side of the ruler until the box contains an inverted T with a dot.
- Click in the ruler where you want the decimal tab.
Option 2:
- Select the cells for which you want to do this.
- Click the arrow in the lower right corner of the Paragraph group on the Home tab of the ribbon.
- Click the Tabs... button in the lower left corner of the dialog.
- Specify a tab position in the box, e.g. 1.5".
- Select the 'Decimal' radio button under 'Alignment'.
- Click Set.
- Click OK.
You will have to type the numbers as they should appear, including the $ for currency and the ( ) for negative numbers.
Regards, Hans Vogelaar

How do I change the order of input tables in joiner?

I have 3 input tables in a JOINER, how can I change the order? for instance, the order now is: t1, t2, t3, for some reason, I want to change to t3, t2,t1.
I use outer join among tables, different table order cause OWB generated different sql statement.
Please help! Thanks.

Unfortunately you cannot... The only way is to remove one group, then create a new one instead and re-connect the group...
JP

How do I change the order of columns in the responses table?

How do i change the order of columns in the responses table in FormsCentral? The default setting puts them in reverse order!

Hi,
The issue with the default ordering of columns in the response table is something that we hope to address in the next update to FormsCentral. In the meantime, you can reorder the columns by selecting them then click/drag using the gray area above the column name. As shown below, an orange marker will show you where the columns will be placed when you release the mouse button.
Sorry for the inconvenience.
Regards,
Brian

How do I change the background of a single cell or a row in a table?

How do I change the background of a single cell or a row in a
table? I doesn't seem to be letting me do that.

Are you using the latest DW? If so, then it isn't letting you
because
bgcolor is deprecated and shouldn't be used.
The correct way is to use css to define the background of a
cell
CSS:
.blackcell {background-color: black;}
HTML:
<td class="blackcell">whatever in the cell</td>
Nadia
Adobe® Community Expert : Dreamweaver
CSS Templates |Tutorials |SEO Articles
http://www.DreamweaverResources.com
~ Template Customization ~
http://www.csstemplates.com.au
Spry Widget Examples
http://www.dreamweaverresources.com/spry-widgets/
"dm25" <[email protected]> wrote in message
news:f4jr5h$luu$[email protected]..
> for some reason that doesn't always work. When I click
inside a cell, it
> doesn't give me an option to change the background
color.

How can I change the thickness of the cell border of a table in Pages for iPad ?

Hi,
i want to change the thickness of cell borders in tables in Pages for iPad to at least 2pt, better 3pt.
How can I change the thickness in the iOS Version of Pages ?
Thanks

try this ...
In ur table call this
ColorRenderer cell=new ColorRender();
// for(int i=0;i<table.getModel().getColumnCount();i++){
// TableColumn mod=this.getColumn((this.getModel().getColumnName(i)));
mod.setCellRenderer(cell);
And ur ColorRender calss should override DefaultTableCellRenderer like this
class ColorRenderer extends DefaultTableCellRenderer {
protected int align;
public ColorRenderer(int align) {
this.align=align;
public Component getTableCellRendererComponent(JTable table,
Object value, boolean isSelected, boolean hasFocus, int row,
int column) {
setHorizontalAlignment(align);
super.getTableCellRendererComponent(table, value, isSelected,
hasFocus, row, column);
if(col==4){
setBackground(Color.cyan);
return this;

We are upgrading from 8.3 to 9.2. How can i get the table(record) structure changes between these 2 version

We are upgrading from 8.3 to 9.2. How can i get the table(record) structure changes between these 2 versions. I am not able to find it in Oracle support.

My guess is you want to upgrade HR8.3 to 9.2 - and that is not one jump upgrade. You will need to go HRMS 83 to 90
(PeopleSoft Enterprise HRMS 8.3x to 9.0 Upgrade (Doc ID 747333.1) and then 90 to 92 (PeopleSoft Human Capital Management 9.0 to 9.2 Upgrade Home Page (Doc ID 1536087.1)
Each these MOS pages contains the Demo to Demo Compare Reports that show the data structures changes between the releases.
Hope it helps.

How can i change the undisclosed text of Detail Disclosure in a table

Hi.
I have a new OAF page, with an advanced table.
The table has a Detail Disclosure (a row-level Hide/Show in a table).
By default, the prompt is "Show" or "Hide" for disclosed/undisclosed state.
I need to change this text to another text, like"payment".
How can i change the text of the table Detail Disclosure?
Please help...

I found this reference in the guide:
In accordance with BLAF guidelines, the Detail column header text for the detail disclosure column and the Show/Hide link texts within the cells of the detail disclosure column can not be modified.
I guess it is currently not possible.
Regards,
LC

How do I change the tables

Similar Messages

Maybe you are looking for